scholarly journals TO THE PROBLEM OF DEVELOPING NEW METHODS FOR ESTIMATING THE MECHANISM OF FORMATION OF FOCAL ZONES OF CATASTROPHIC EVENTS IN CARBON BEDS

2021 ◽  
Vol 2 (3) ◽  
pp. 354-360
Author(s):  
Viktor N. Oparin ◽  
Tatiana A. Kiryaeva
Keyword(s):  
Experimental System ◽  
Simulation Method ◽  
Field Studies ◽  
Two Phase ◽  
Kinematic Equation ◽  
Exchange Processes ◽  
Experimental Laboratory ◽  
Coal Rock ◽  
Gas Expansion ◽  
Seismic Background

The article shows that the problem of safe mining is largely related to ideas about the mechanisms of interaction of nonlinear geomechanical and physicochemical mass-gas exchange processes in multiphase coal-rock massifs. For the first time, a complex of generalizing analytical, experimental laboratory and field studies at the regional level, carried out by the authors, made it possible to establish that in modern conditions, with the development of deep horizons, the role of rock pressure, temperature and geostructural factors, as well as the presence of an increasing influence of the seismic background from earthquakes and technological explosions. A numerical simulation method and an original experimental system for determining the regularity of the decay of this two-phase flow were developed by Chinese and Russian specialists taking into account the influence of the gas expansion energy on the propagation characteristics of a mixture of pulverized coal and gas. The analytical basis for describing the established deterministic relationships between the existing nonlinear geomechanical and physicochemical processes in stressed coal-bearing massifs was the establishment of an operator correspondence between the physicochemical equation of I. Langmuir and the kinematic equation of V.N. Oparin for pendulum waves.

scholarly journals Study of the Effect of Centrifugal Force on Rotor Blade Icing Process

2017 ◽  
Vol 2017 ◽  
pp. 1-9 ◽  
Author(s):  
Zhengzhi Wang ◽  
Chunling Zhu
Keyword(s):  
Numerical Simulation ◽  
Centrifugal Force ◽  
Rotor Blade ◽  
Flow Direction ◽  
Three Dimensional ◽  
Simulation Method ◽  
Two Phase ◽  
Numerical Simulation Method ◽  
Calculation Results ◽  
Flow Field Characteristics

In view of the rotor icing problems, the influence of centrifugal force on rotor blade icing is investigated. A numerical simulation method of three-dimensional rotor blade icing is presented. Body-fitted grids around the rotor blade are generated using overlapping grid technology and rotor flow field characteristics are obtained by solving N-S equations. According to Eulerian two-phase flow, the droplet trajectories are calculated and droplet impingement characteristics are obtained. The mass and energy conservation equations of ice accretion model are established and a new calculation method of runback water mass based on shear stress and centrifugal force is proposed to simulate water flow and ice shape. The calculation results are compared with available experimental results in order to verify the correctness of the numerical simulation method. The influence of centrifugal force on rotor icing is calculated. The results show that the flow direction and distribution of liquid water on rotor surfaces change under the action of centrifugal force, which lead to the increasing of icing at the stagnation point and the decreasing of icing on both frozen limitations.

scholarly journals Validation of Two-Phase Flow Model for Leachate Recirculation in Bioreactor Landfills

2014 ◽  
Vol 2014 ◽  
pp. 1-24 ◽  
Author(s):  
Krishna R. Reddy ◽  
Rajiv K. Giri ◽  
Hanumanth S. Kulkarni
Keyword(s):  
Rational Design ◽  
Flow Model ◽  
Two Phase Flow ◽  
Field Studies ◽  
Moisture Distribution ◽  
Phase Flow ◽  
Bioreactor Landfills ◽  
Leachate Recirculation ◽  
Lagrangian Analysis ◽  
Two Phase

A numerical two-phase flow model is presented to determine the moisture distribution and pore water and gas pressures within unsaturated municipal solid waste (MSW) in bioreactor landfills during leachate recirculation. The numerical model used is the Fast Lagrangian Analysis of Continua (FLAC), which is based on finite difference approach. The model governing equations and mathematical formulations is briefly explained. Validation of the model is examined by simulating the published laboratory and field studies and published modeling studies. Overall, the two-phase flow model is found to produce results comparable with those of the published studies. This assures that the model can be used for the prediction of moisture distribution and for the rational design of leachate recirculation systems in bioreactor landfills.

The Research on Steering Fracture Numerical Simulation

2013 ◽  
Vol 734-737 ◽  
pp. 1488-1492
Author(s):  
Zhen Yu Liu ◽  
Li Hong Yao ◽  
Hu Zhen Wang ◽  
Cui Cui Ye
Keyword(s):  
Numerical Simulation ◽  
Finite Element Method ◽  
Finite Element ◽  
Three Dimensional ◽  
Simulation Method ◽  
Production Performance ◽  
Phase Flow ◽  
Water Production ◽  
Two Phase ◽  
Fractured Well

The fractures after artificial steering fracturing appear in shades of curved surface. Aiming at the problem of steering fracture, in the paper, numerical simulation method under the condition of three-dimensional two-phase flow is presented based on finite element method. In this method, of steering fracture was achieved by adopting surface elements fractures and tetrahedron elements to describe formation. By numerical simulation, the change rule of oil and water production performance of steering fractures can be calculated, and then the steering fracture parameters can be optimized before fracturing. A new method was supplied for the numerical simulation of artificial fractured well.

scholarly journals Prediction of Horizontal Pneumatic Conveying of Large Coal Particles Using Discrete Phase Model

2020 ◽  
Vol 2020 ◽  
pp. 1-15
Author(s):  
Daolong Yang ◽  
Ge Li ◽  
Yanxiang Wang ◽  
Qingkai Wang ◽  
Jianping Li ◽  
...  
Keyword(s):  
Simulation Method ◽  
Phase Model ◽  
Pneumatic Conveying ◽  
Discrete Phase Model ◽  
Two Phase ◽  
Coal Particles ◽  
Large Particles ◽  
Discrete Phase ◽  
Field Velocity ◽  
Conveying System

The pneumatic conveying focusing on gas-solid two-phase flow plays an important role in a conveying system. Previous work has been conducted in the fields of small particles, where the size was less than 5 mm; however, there are few studies regarding large sizes (>5 mm). In order to predict the horizontal pneumatic conveying of large coal particles, the coupling methods based on the Euler–Lagrange approach and discrete phase model (DPM) have been used for the simulated research. Compared with the experimental results under the same working condition, the particle trajectory obtained by simulation is similar to the particle distribution at the same position in the experiment, and it turns out that the simulation method is feasible for the horizontal pneumatic conveying of large particles. Multifactor simulations are also carried out to analyse the effects of particle size, flow field velocity, solid-gas rate, and pipe diameter on the wall abrasion during horizontal pneumatic conveying, which provides simulation reference and design guide for pneumatic conveying of large particles.

Numerical Simulation Study on the Key Influencing Factors of Water-Invasion Performance for the Gas Wells with Bottom-Water

2014 ◽  
Vol 884-885 ◽  
pp. 104-107
Author(s):  
Zhi Jun Li ◽  
Ji Qiang Li ◽  
Wen De Yan
Keyword(s):  
Numerical Simulation ◽  
Influencing Factors ◽  
Bottom Water ◽  
Simulation Method ◽  
Gas Production ◽  
Production Performance ◽  
Gas Wells ◽  
Two Phase ◽  
Gas Well ◽  
Water Gas

For the water-sweeping gas reservoir, especially when the water-body is active, water invasion can play positive roles in maintaining formation pressure and keeping the gas well production. But when the water-cone break through and towards the well bottom, suffers from the influencing of gas-water two phase flows, permeability of gas phase decrease sharply and will have a serious impact on the production performance of the gas well. Moreover, the time when the water-cone breakthrough will directly affect the final recovery of the gas wells, therefore, the numerical simulation method is used to conduct the research on the key influencing factors of water-invasion performance for the gas wells with bottom-water, which is the basis of the mechanical model for the typical gas wells with bottom-water. It indicate that as followings: (1) the key influencing factors of water-invasion performance for the gas wells with bottom-water are those, such as the open degree of the gas beds, well gas production and the amount of Kv/Kh value; and (2) the barrier will be in charge of great significance on the water-controlling for the bottom water gas wells, and its radius is the key factor to affect water-invasion performance for the bottom water gas wells where the barriers exist nearby.

Numerical Simulation of Forced Convective Boiling in a Microchannel

2018 ◽  
Vol 10 (4) ◽  
Author(s):  
Yun Whan Na ◽  
J. N. Chung
Keyword(s):  
Numerical Simulation ◽  
Two Phase Flow ◽  
Liquid Velocity ◽  
Flow Boiling ◽  
Simulation Method ◽  
Flow Patterns ◽  
Heat Fluxes ◽  
Phase Flow ◽  
Two Phase ◽  
Convective Boiling

Forced convective flow boiling in a single microchannel with different channel heights was studied through a numerical simulation method to investigate bubble dynamics, two-phase flow patterns, and boiling heat transfer. The momentum and energy equations were solved using a finite volume (FV) numerical method, while the liquid–vapor interface of a bubble is captured using the volume of fluid (VOF) technique. The effects of different constant wall heat fluxes and different channel heights on the boiling mechanisms were investigated. The effects of liquid velocity on the bubble departure diameter were also analyzed. The predicted bubble shapes and distribution profiles together with two-phase flow patterns are also provided.

Development of Numerical Simulation for Jet Breakup Behavior in Complicated Structure of BWR Lower Plenum: (4) Multi-Channel Experimental Analysis by Detailed Two-Phase Analysis Code TPFIT

2014 ◽  
Author(s):  
Takayuki Suzuki ◽  
Hiroyuki Yoshida ◽  
Fumihisa Nagase ◽  
Yutaka Abe ◽  
Akiko Kaneko
Keyword(s):  
High Speed ◽  
Evaluation Method ◽  
Simulation Method ◽  
Severe Accident ◽  
Interface Tracking ◽  
Phase Flow ◽  
Complicated Structure ◽  
Two Phase ◽  
Support Plate ◽  
Multi Phase

In order to improve the safety of Boiling Water Reactor (BWR), it is required to know the behavior of the plant when an accident occurred as can be seen at Fukushima Daiichi nuclear power plant accident. Especially, it is important to estimate the behavior of molten core jet in the lower part of the reactor pressure vessel at a severe accident. In the BWR lower plenum, the flow characteristics of molten core jet are affected by many complicated structures, such as control rod guide tubes, instrument guide tubes and core support plate. However, it is difficult to evaluate these effects on molten core jet experimentally. Therefore, we considered that multi-phase computational fluid dynamics approach is the best way to estimate the effects on molten core jet by complicated structure. The objective of this study is to develop the evaluation method for the flow characteristic of molten core jet including the effects of the complicated structures in the lower plenum. So we are developing a simulation method to estimate the behavior of molten core jet falling down through the core support plate to the lower plenum of the BWR. The simulation method is based on interface tracking method code TPFIT (Two Phase Flow simulation code with Interface Tracking). To verify and validate the applicability of the developed method in detail, it is necessary to obtain the experimental data that can be compared with detailed numerical results by the TPFIT. Thus, the authors are carrying out experimental works by use of multi-phase flow visualization technique. In the experiments, time series of interface shapes are observed by high speed camera and velocity profiles in/out of the jet are measured by the PIV method. In this paper, we carried out analysis of the multi-channel experiment using the analytical method based on the TPFIT. Specifically, predicted results including interface shape and velocity profile in and out simulated molten material were compared with measured results. In the results, predicted results agreed with measured results qualitatively.

Sign in / Sign up

Export Citation Format

Share Document