scholarly journals Selection of Experimental Hybrids of Strawberry Using Multivariate Analysis

Agronomy ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 598 ◽  
Author(s):  
Eneide Barth ◽  
Juliano Tadeu Vilela de Resende ◽  
Aline Fabiana Paladini Moreira ◽  
Keny Henrique Mariguele ◽  
André Ricardo Zeist ◽  
...  
Keyword(s):  
Multivariate Analysis ◽  
Block Design ◽  
Selection Index ◽  
Principal Component ◽  
Hierarchical Cluster ◽  
High Variability ◽  
Soluble Solids ◽  
Fresh Market ◽  
Commercial Cultivars ◽  
Selection Of

The selection of superior strawberry genotypes is a complex process due to the high variability after hybridization that is caused by the octoploid nature and the heterozygosis, making the selection of multiple traits difficult. This study aimed to select strawberry hybrids with the potential for fresh consumption and/or processing by applying multivariate analysis to obtain traits of interest simultaneously. Hybrids were obtained from the crossing among seven commercial cultivars, defining a selection of 10% of them. The experimental design consisted of an augmented block design, with two commercial cultivars, Camarosa and Camino Real, as the controls. Different variables, including the number and average mass of commercial fruits, total fruit mass, pH, soluble solids (SS), titratable acidity (TA), SS/TA ratio, reducing sugars, pectin, ascorbic acid, phenolic compounds, and anthocyanin’s, were assessed. The selection of hybrids was based on the Mulamba and Mock rank-summation index, principal component analysis, and Ward’s hierarchical cluster analysis. The selection index was based on different weights being adopted for fresh market and processing. The assessed traits had high variability between hybrids. The highest selection gains were obtained for production traits, but the different weight assignment resulted in different classifications of hybrids for both fresh consumption and processing. Most of the hybrids selected by the index remained in the same group in the principal component and hierarchical cluster analyses, which indicates that multivariate analysis is a valuable tool for assisting in the selection of superior hybrids in the strawberry crop.

scholarly journals Agronomic potential of BC1F2 dwarf round tomato populations

2020 ◽  
Vol 44 ◽  
Author(s):  
Rafael Resende Finzi ◽  
Gabriel Mascarenhas Maciel ◽  
Hugo Gabriel Peres ◽  
Marina Freitas e Silva ◽  
Joicy Vitória Miranda Peixoto ◽  
...  
Keyword(s):  
Block Design ◽  
Selection Index ◽  
Genetic Material ◽  
Fruit Shape ◽  
Economic Benefits ◽  
Fruit Weight ◽  
Soluble Solids ◽  
Transverse Diameter ◽  
Agronomic Potential ◽  
Selection Of

ABSTRACT The use of dwarf lines to obtain mini-tomato hybrids has provided agronomic and economic benefits. In Brazil, round tomatoes predominate over other varieties. The benefits of using a dwarf parent in round tomato hybrids has yet to be explored, making it important to develop dwarf round tomato lines. Backcrossing is the most suitable method to develop these lines. Evaluation and selection of the dwarf populations can improve the development of such lines. Thus, the aim of this study was to select BC1F2 populations of dwarf round tomatoes with agronomic potential and high-quality fruit. The study was conducted at the Vegetable Experimental Station of the Federal University of Uberlândia (UFU). A randomized block design was used, with 15 treatments and three replicates. The genetic material analyzed consisted of 12 BC1F2 dwarf tomato populations, plus both parents (recurrent and donor) and a commercial hybrid. The characteristics assessed were: average fruit weight (g), total soluble solids (ºBrix), number of locules (locules per fruit-1), fruit shape, pulp thickness (cm), longitudinal (cm) and transverse fruit diameter (cm), internode length (cm) and plant height (cm). The data were submitted to mean testing, multivariate analyses and a selection index. In general, average fruit weight in the dwarf populations increased significantly after the first backcross, with some fruits exhibiting a similar shape to round tomatoes. Selection of the populations UFU-DTOM7, UFU-DTOM10, UFU-DTOM5, UFU-DTOM9, and UFU-DTOM3 resulted in an estimated 6% increase in the number of locules, transverse diameter, TD/LD ratio and average fruit weight. The BC1F2 dwarf populations UFU-DTOM7 and UFU-DTOM10 were the most promising for develop inbred lines with round fruits. Despite the considerable progress achieved in this study, we suggest a second backcross, in order to obtain lines and, posteriorly, hybrids with round fruits and compact plants.

scholarly journals Physicochemical properties of Colombian cape gooseberry hybrids in the selection of high-quality materials

2020 ◽  
Vol 55 ◽  
Author(s):  
Tulio Cesar Lagos-Burbano ◽  
Diego Fernando Mejía-España ◽  
Oscar Arango-Bedoya ◽  
Zulma Yizeth Villaquirán-Samboni ◽  
Liz Katherine Lagos-Santander ◽  
...  
Keyword(s):  
Physicochemical Properties ◽  
Agricultural Research ◽  
Block Design ◽  
Selection Index ◽  
Titratable Acidity ◽  
Fruit Weight ◽  
Soluble Solids ◽  
Physalis Peruviana ◽  
Cape Gooseberry ◽  
Selection Of

Abstract: The objective of this work was to evaluate the physicochemical properties of Colombian cape gooseberry (Physalis peruviana) hybrids and to select those with the highest fruit quality based on a selection index. A total of 36 cape gooseberry hybrids obtained from crossings between nine double haploid lines from the Tibaitatá Research Center of Colombian Corporation for Agricultural Research were evaluated. The trials were conducted in a randomized complete block design, in four locations (environments), corresponding to the municipalities of Ipiales, Gualmatán, Puerres, and Pasto, in the department of Nariño, Colombia. The following variables were evaluated: cracking percentage (CP), fruit weight with calyx (FWC), juice content (JC), total titratable acidity (TTA), total soluble solids (TSS), maturity index (MI), firmness (F), ascorbic acid (AA), and respiration rate (RR). CP was affected by the environment, showing lower values in Ipiales, Gualmatán, and Puerres. The hybrid factor significantly affected all assessed variables, except RR. The selected hybrids showed higher values for TSS, MI, FWC, and AA, besides lower values for CP and RR. The 3x9 hybrid stands out for presenting averages that are high for AA (42.59 mg 100 g-1) and MI (7.91) and low for RR (49.2 mg CO2 kg-1 h-1).

scholarly journals Diallel cross among fresh market tomato inbreeding lines

2012 ◽  
Vol 30 (2) ◽  
pp. 246-251 ◽  
Author(s):  
Lívia M de Souza ◽  
Maria Elisa AGZ Paterniani ◽  
Paulo César T de Melo ◽  
Arlete MT de Melo
Keyword(s):  
Combining Ability ◽  
Yield Components ◽  
Block Design ◽  
Diallel Cross ◽  
Fruit Yield ◽  
Soluble Solids ◽  
Width Ratio ◽  
Parental Line ◽  
Fresh Market ◽  
Fruit Number

The general combining ability (GCA), specific combining ability (SCA), and heterosis were studied in a complete diallel cross among fresh market tomato breeding lines with reciprocal excluded. Fifteen genotypes (five parents and ten hybrids) were tested using a randomized complete block design, with three replications, and the experiments were conducted in Itatiba, São Paulo state, Brazil, in 2005/06. The yield components evaluated were fruit yield per plant (FP), fruit number per plant (FN), average fruit weight (FW); cluster number per plant (CN); fruit number per cluster (FC), fruit wall thickness (FT) and number of locules per fruit (NL). Fruit quality components evaluated were total soluble solids (SS); total titratable acidity (TA); SS/TA ratio, fruit length (FL); fruit width (WI); length to width ratio (FL/WI). The data for each trait was first subjected to analysis of variance. Griffing's method 2, model 1 was employed to estimate the general (GCA) and specific (SCA) combining abilities. Parental and hybrid data for each trait were used to estimate of mid-parent heterosis. For plant fruit yield, IAC-2 was the best parental line with the highest GCA followed by IAC-4 and IAC-1 lines. The hybrids IAC-1 x IAC-2, IAC-1 x IAC-4 and IAC-2 x IAC-4 showed the highest effects of SCA. High heterotic responses were found for fruit yield and plant fruit number with values up to 49.72% and 47.19%, respectively. The best hybrids for fruit yield and plant fruit number were IAC-1 x IAC-2, IAC-1 x IAC-4 and IAC-2 x IAC-5, for fruit yield and plant fruit number, the main yield components.

scholarly journals Assessment of wild tomato accessions for fruit yield, physicochemical and nutritional properties under a rain forest agro-ecology

2020 ◽  
Vol 1 (2) ◽  
pp. 1-11
Author(s):  
Dorcas Ibitoye ◽  
Adesike Kolawole ◽  
Roseline Feyisola
Keyword(s):  
Rain Forest ◽  
Agronomic Traits ◽  
Block Design ◽  
Principal Component ◽  
Fruit Yield ◽  
Soluble Solids ◽  
Forest Zone ◽  
Breeding Lines ◽  
Wild Tomato ◽  
Solanum Lycopersicum L

Tomato (Solanum lycopersicum L.) is a broadly consumed fruit vegetable globally. It is one of the research mandate vegetable of the National Horticultural Research Institute (NIHORT), Ibadan, Nigeria. The institute’s contains diverse collections of tomato accessions and wild relatives, without utilization information for the African continent. With the decline in diversity and potential of cultivars, a robust tomato breeding pipeline with broad genetic base that eliminates redundancy in the development of lines with desired horticultural traits is paramount. This study evaluated the mean performance and variations of thirteen wild tomato accessions obtained from the C.M. Rick Tomato Genetic Resource Center, University of California, Davis, USA, evaluated for agronomic, nutritional and physicochemical traits under a rain forest zone in Nigeria. The accessions were planted and grown in three replications with randomized complete block design. Agronomic traits, physicochemical and nutritional parameters were measured and analyzed. There was significant (P < 0.001) variation among accessions for all traits measured. Accession LA0130 was separated from others by cluster analysis and was outstanding for its unique attributes which include: fruit yield parameters, total soluble solids, acidity and content. The principal component analysis suggests fruit yield related traits, acidity and contributed most to the variation among the 13 accessions. The results obtained can be used to breed materials adapted to a rain forest . These wild tomato accessions have genes with desirable agronomic, nutritional and physicochemical traits that could be into breeding lines to improve commercial tomato varieties.

scholarly journals Agronomic and yield selection of doubled haploid lines of rainfed lowland rice in advanced yield trials

2021 ◽  
Vol 22 (7) ◽  
Author(s):  
Miftahur Rizqi Akbar ◽  
Bambang Sapta Purwoko ◽  
ISWARI SARASWATI DEWI ◽  
WILLY BAYUARDI SUWARNO ◽  
SUGIYANTA SUGIYANTA ◽  
...  
Keyword(s):  
Doubled Haploid ◽  
Selection Process ◽  
Block Design ◽  
Selection Index ◽  
Lowland Rice ◽  
Agronomic Characters ◽  
Doubled Haploid Lines ◽  
Rainfed Lowland ◽  
Yield Trials ◽  
Selection Of

Abstract. Akbar MR, Purwoko BS, Dewi IS, Suwarno WB, Sugiyanta, Anshori MF. 2021. Agronomic and yield selection of doubled haploid lines of rainfed lowland rice in advanced yield trials. Biodiversitas 22: 3006-3012. Selection process is important step to obtain high yielding variety. This study aimed to obtain information on agronomic performance of doubled haploid lines of rainfed rice in advanced yield trials and select the best lines for multi-location yield trials. Two experiments were conducted in Bogor and Subang using a randomized complete block design for each location and consisted of 35 doubled haploid lines and two check varieties namely Ciherang and Inpari 18 as a treatment. The result revealed that interaction between genotype and environment (G x E) significantly affected all agronomic characters, except on the panicle length. Characters with high heritability value were all agronomic characters except number of productive tillers and productivity. Genotypic correlation analysis showed that number of productive tillers and weight of 1000 grains had significant and positive correlation with productivity. The selection used weighted selection index based on multivariate analysis. Fourteen lines were selected for multi-location yield trials. These lines had characteristics as follows: number of productive tillers (14.0-17.7 tillers), weight of 1000 grains (24.7-32.5 g), and productivity (5.0-6.2 ton ha-1). The selected lines can be evaluated further to obtain superior lines in multi-location trials.

scholarly journals EFEITO DE DOSES DE INSETICIDA E ADJUVANTE NO CONTROLE DE PHYLLOCNISTIS CITRELLASTAINTON (LEPIDOPTERA: GRACILLARIIDAE) EM LIMA ÁCIDA TAHITI

2018 ◽  
Vol 14 (3) ◽  
pp. 72-81
Author(s):  
Marcos Doniseti Michelotto ◽  
Willians César Carrega ◽  
Juliana Altafin Galli ◽  
Maycon Ferraz ◽  
Tamiris Marion de Souza ◽  
...  
Keyword(s):  
Multivariate Analysis ◽  
Statistical Design ◽  
Principal Component ◽  
Hierarchical Cluster ◽  
Fruit Production ◽  
Leaf Miner ◽  
Control Treatment ◽  
Citrus Leaf ◽  
Acid Lime ◽  
And Control

Citrus leaf miner, Phyllocnistis citrellaStainton,1856 (Lepidoptera,Gracillariidae), is one of the main pests of the culture of acid lime Tahiti and control chemical is the primary method of control. The objective of this study was to testthe effect of insecticide treatments associated with adjuvant, in increasing the efficiency of control of citrus leaf miner in acid lime Tahiti. An experiment was installed in statistical design of randomized blocks with five treatments and four repetitions. The treatments consisted of a control treatment without application of pesticides and the use of the insecticide Ampligo® (clorantraniliprole + lambda-cialotrina) at the recommended dosage, at half the recommended dose and associated with the adjuvant. Three applications were carried out respecting the shortage period of the product. The damages of citrus leaf miner wereassessed in five branches of the central plant.Fruits wereharvest and determining the number and the mass (kg) of fruit per plant.The data were subjected to analysis of variance (F test) and the means were compared by Tukey test (P ≤ 0.05). Also the data were submitted to multivariate analysis using hierarchical cluster analysis techniques and principal component analysis (PCA). All treatments were effective in reducing the attack symptoms of citrus leaf miner, highlighting insecticide in half dosage and application of insecticide in half dosage with the adjuvant.The multivariate analysis was effective in discriminating application treatments of insecticides and adjuvant, and showa direct relationship between the citrus leaf miner and the decrease in fruit production.

scholarly journals Breeding full-sib families of sugar cane using selection index

2014 ◽  
Vol 44 (4) ◽  
pp. 605-611 ◽  
Author(s):  
Livia Marcon Almeida ◽  
Alexandre Pio Viana ◽  
Antônio Teixeira do Amaral Júnior ◽  
Josil de Barros Carneiro Júnior
Keyword(s):  
Sugar Cane ◽  
Block Design ◽  
Selection Index ◽  
Breeding Program ◽  
Growing Seasons ◽  
Randomized Block Design ◽  
Sib Families ◽  
Number Of Stems ◽  
Selection Stage ◽  
Selection Of

An experiment with families belonging to the first selection stage (T1) of the Sugar Cane Breeding Program (PMGCA) of the Universidade Federal Rural do Rio de Janeiro (UFRRJ)/RIDESA was carried out in the Plant Disa, located in the municipality of Conceição da Barra-ES, in 2006, aiming to evaluate families, for the selection of superior plants for the later stages of the breeding program of the culture. Sixty-eight full-sib families and three genotypes considered standards with potential recommendation for the area under study were evaluated. The experiment was arranged in a statistical randomized block design, in which the families were grouped into four sets. Each set had four replicates and one hundred seedlings per plot, with spacing of 0.5 meters between plants and 1.40 between rows. The evaluations were conducted during two growing seasons, corresponding to the first and second ratoon, 2008 and 2009, respectively. The traits stem diameter (DMC), total weight of the plot (P), number of stems (NC) Brix of the lower stem (Brix PE) and Brix of the upper stem (Brix PT) were assessed. All traits were significant for the genotypes, by the F test (P<0.01), in joint analyses of environments, which reveals significant differences between families. The values found in this study for the genetic variation coefficient (CVg) indicate great potential for success in breeding programs targeting at the selection of the traits evaluated. The highest gains were achieved when the indices of Smith and Hazel and Mulamba and Mock were used, which allowed simultaneous superior gains in all traits for the best families.

scholarly journals Phenotypic diversity of autochthonous European (Prunus domestica L.) and Damson (Prunus insititia L.) plum accessions based on multivariate analysis  

2012 ◽  
Vol 39 (No. 1) ◽  
pp. 8-20 ◽  
Author(s):  
T. Milošević ◽  
N. Milošević
Keyword(s):  
Multivariate Analysis ◽  
Phenotypic Diversity ◽  
Principal Component ◽  
Fruit Weight ◽  
Soluble Solids ◽  
Soluble Solids Content ◽  
Prunus Domestica ◽  
Weight Yield ◽  
Solids Content ◽  
Plum Brandy

Forty-three European (Prunus domestica L.) and twelve Damson (P. insititia L.) plum accessions originating from different and important growing regions in former Yugoslavia were studied to assess the overall degree of polymorphism, detect similarities among accessions and assess important agronomic, fruit quality and sensorial traits. Twenty variables were scored and subjected to multivariate analysis. Results showed a considerable phenotypic diversity among plum germplasm. A high correlation was found among some evaluated variables. Principal component analysis (PCA) revealed that traits related to fruit weight, yield and soluble solids content accounted for a large proportion of the observed variability. Accessions Bela Požegača, Crvena Ranka Bardaklija, Mudara, Požegača, Car Du&scaron;an, Julka, Turgonja and Crna Petrovka cvs are recommended for fresh consumption, while Požegača, Korajka, Bosanka and Bilska Rana cvs are recommended for drying. Most of accessions can be used for processing, particularly into plum brandy, whereas some can be used as rootstocks.

scholarly journals Selection of half-sib families of creole melon (Cucumis melo L.) on the Ecuadorian coast

2019 ◽  
Vol 13 (2) ◽  
pp. 178-185
Author(s):  
Francisco Espinosa ◽  
Franco Alirio Vallejo ◽  
Lauden Rizzo
Keyword(s):  
Block Design ◽  
Fruit Weight ◽  
Soluble Solids ◽  
Genetic Progress ◽  
Randomized Complete Block Design ◽  
Sib Families ◽  
High Production ◽  
Cucumis Melo L ◽  
Fruit Diameter ◽  
Selection Of

The creole melon cantaloupe is a horticultural species, whose fruits are used for human nutrition. However, no research has been reported on their genetic variability for starting breeding processes. The objective of this study was to take advantage of the variability of creole melons for genetic improvement. 20 creole melon half-sib families were selected and evaluated for production characteristics and fruit quality in order to obtain improved populations. The study was carried out in Palenque canton, Ecuador. Seeds from 20 half-sib families were used, arranged in a randomized complete block design with three replications. The differences between the families were significant for all the studied characteristics. Family 93 presented higher averages for fruit weight, fruit diameter and production (per hectare), and family 196 did so for soluble solids. The phenotypic correlations were positive and significant between the fruit weight and fruit diameter, fruit length, pulp thickness, fruit cavity, soluble solids and production. The coefficients of genetic variation, in general, were lower than the coefficients of environmental variation. The estimates of heritability broadly had a moderate magnitude (30-60%) for the 10 evaluated characteristics, and the magnitude of the expected genetic progress was low (<10%) for the fruit weight, production, and soluble solids, so the selection for high production should focus on fruit weight and soluble solids.

scholarly journals Physicochemical Quality, Antioxidant Capacity and Nutritional Value in Tuberous Roots of Some Wild Dahlia Species

2019 ◽  
Vol 47 (3) ◽  
Author(s):  
Esteban A. RIVERA-ESPEJEL ◽  
Oscar CRUZ-ALVAREZ ◽  
José M. MEJÍA-MUÑOZ ◽  
María R. GARCÍA-MATEOS ◽  
María T.B. COLINAS-LEÓN ◽  
...  
Keyword(s):  
Antioxidant Capacity ◽  
Nutritional Value ◽  
Block Design ◽  
Titratable Acidity ◽  
Soluble Solids ◽  
Digital Object Identifier ◽  
Physicochemical Quality ◽  
Tuberous Roots ◽  
Randomized Complete Block Design ◽  
Selection Of

The aim of this research was to evaluate the physicochemical quality, antioxidant capacity and nutritional value in tuberous roots of some wild dahlia species. The experiment was carried out in the Department of Plant Science of the Autonomous University Chapingo, Mexico. Plants were established in a randomized complete block design with five replications. The total soluble solids (TSS), titratable acidity (TA), vitamin C (VC), total phenols (TP), antioxidant capacity (AC), inulin and its proximate composition were evaluated. Among the materials analyzed, the most outstanding wild species were Dahlia campanulata, D. coccinea and D. brevis, where D. campanulata stood out for its concentration of VC (0.05 mg 100 g-1), AC (1.88 mg VCEAC g-1), inulin, DM and TC (72.25, 24.38 and 88.37%, respectively), however, the inulin content was similar to D. coccinea (66.17%), which was also outstanding with respect to the content of TP (1.74 mg GA g-1). Likewise, D. brevis presented the highest values of RFi (5.49%) and A (78.42%). According to our results, the tuberous roots of wild dahlia species can be used as food, as well as being a source of selection of traits of nutraceutic interest for genetic improvement.   ********* In press - Online First. Article has been peer reviewed, accepted for publication and published online without pagination. It will receive pagination when the issue will be ready for publishing as a complete number (Volume 47, Issue 3, 2019). The article is searchable and citable by Digital Object Identifier (DOI). DOI link will become active after the article will be included in the complete issue. *********  

Sign in / Sign up

Export Citation Format

Share Document