scholarly journals Optimal LED Wavelength Composition for the Production of High-Quality Watermelon and Interspecific Squash Seedlings Used for Grafting

Agronomy ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 870 ◽  
Author(s):  
Filippos Bantis ◽  
Athanasios Koukounaras ◽  
Anastasios S. Siomos ◽  
Kalliopi Radoglou ◽  
Christodoulos Dangitsis
Keyword(s):  
Blue Emission ◽  
Dry Weight ◽  
Photosynthetic Photon Flux Density ◽  
Stem Diameter ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Light Sources ◽  
High Quality ◽  
Light Emitting ◽  
Shoot Dry Weight

Watermelon is cultivated worldwide and is mainly grafted onto interspecific squash rootstocks. Light-emitting diodes (LEDs) can be implemented as light sources during indoor production of both species and their spectral quality is of great importance. The objective of the present study was to determine the optimal emission of LEDs with wide wavelength for the production of watermelon and interspecific squash seedlings in a growth chamber. Conditions were set at 22/20 °C temperature (day/night), 16 h photoperiod, and 85 ± 5 μmol m−2 s−1 photosynthetic photon flux density. Illumination was provided by fluorescent (FL, T0) lamps or four LEDs (T1, T2, T3, and T4) emitting varying wide spectra. Watermelon seedlings had greater shoot length, stem diameter, cotyledon area, shoot dry weight-to-length (DW/L) ratio, and Dickson’s quality index (DQI) under T1 and T3, while leaf area and shoot dry weight (DW) had higher values under T1. Interspecific squash seedlings had greater stem diameter, and shoot and root DW under T1 and T3, while leaf and cotyledon areas were favored under T1. In both species, T0 showed inferior development. It could be concluded that a light source with high red emission, relatively low blue emission, and a red:far-red ratio of about 3 units seems ideal for the production of high-quality watermelon (scion) and interspecific squash (rootstock) seedlings.

scholarly journals Manipulation of Intraday Durations of Blue- and Red-Light Irradiation to Improve Cos Lettuce Growth

2021 ◽  
Vol 12 ◽  
Author(s):  
Tomohiro Jishi ◽  
Ryo Matsuda ◽  
Kazuhiro Fujiwara
Keyword(s):  
Blue Light ◽  
Red Light ◽  
Dry Weight ◽  
Photosynthetic Photon Flux Density ◽  
Light Irradiation ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Leaf Elongation ◽  
Shoot Dry Weight ◽  
Lettuce Growth

The morphology of plants growing under combined blue- and red-light irradiation is affected by the presence or absence of time slots of blue- and red-light mono-irradiation. The purposes of this study were to investigate the morphology and growth of cos lettuce grown under light irradiation combining several durations of blue and red light simultaneously and independent mono-irradiations of blue and red light during the day, and to clarify the effects of the durations of blue-light mono-irradiation and blue-light irradiation. Young cos lettuce seedlings were grown under 24-h blue-light irradiation with a photosynthetic photon flux density (PPFD) of 110μmol m−2 s−1 (B+0R) or under 24-h blue-light irradiation with a PPFD of 100μmol m−2 s−1 supplemented with 8 (B+8R), 16 (B+16R), and 24-h (B+24R) red-light irradiation with PPFDs of 30, 15, and 10μmol m−2 s−1, respectively (Experiment 1). The daily light integral was 9.50mol m−2 in all treatments. In Experiment 1, leaf elongation was promoted as the duration of red-light irradiation decreased and the duration of blue-light mono-irradiation increased. The maximum shoot dry weight was observed under the B+8R treatment. Growth was likely promoted by the expansion of the light-receptive area caused by moderate leaf elongation without tilting. In Experiment 2, young cos lettuce seedlings were grown as for Experiment 1, but blue- and red-light irradiation intensities were reversed (R+0B, R+8B, R+16B, and R+24B). Leaf elongation was promoted by the absence of blue-light irradiation (R+0B). The leaf surface was increasingly flattened, and the shoot dry weight was enhanced, as the duration of blue-light irradiation increased. Thus, cos lettuce leaf morphology may be manipulated by adjusting each duration of blue-light mono-irradiation, red-light mono-irradiation, and blue- and red-light simultaneous irradiation, which can, in turn, promote cos lettuce growth.

scholarly journals Supplementary Light Source Affects Growth and Development of Carnation ‘Dreambyul’ Cuttings

Agronomy ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 1217
Author(s):  
Mengzhao Wang ◽  
Jie Xiao ◽  
Hao Wei ◽  
Byoung Ryong Jeong
Keyword(s):  
Light Source ◽  
Root Formation ◽  
Dianthus Caryophyllus ◽  
Photosynthetic Photon Flux Density ◽  
Photon Flux ◽  
Shoot Biomass ◽  
Photon Flux Density ◽  
Light Sources ◽  
Cut Flowers ◽  
Light Emitting

Carnation (Dianthus caryophyllus L.) is a major floricultural crop, cultivated widely for cut flowers. This study was conducted to determine the optimal supplementary light source for the cutting propagation of carnation ‘Dreambyul’ cuttings. Terminal cuttings were propagated in a glasshouse with an average of 260 µmol·m−2·s−1 photosynthetic photon flux density (PPFD) coming from the sun (the control), supplemented with one of three artificial light sources: mixed (red: blue: white = 6:1:1) light-emitting diodes (LED-mix), metal halide (MH) lamps, or high-pressure sodium (HPS) lamps. The supplementary light was provided from 7:00 to 17:00 h at 100 µmol·m−2·s−1 PPFD during propagation. The cuttings were kept on a fogged bench in a glasshouse for 25 days with 24/15 °C day/night temperatures and 88% relative humidity. Compared with the control, better root formation was observed from cuttings grown under the supplementary lights after 10 days. After 25 days of propagation, MH significantly increased the root length, root number, root fresh and dry weights, and shoot biomass, shoot length, and shoot fresh and dry weights. The best root ball formation and the highest root activities were also found in cuttings propagated with supplementary MH light. Supplementary light increased the plant temperature, quantum yield, stomatal conductance, and the contents of chlorophyll, soluble proteins, and carbohydrates. Overall, the root formation and development of carnation ‘Dreambyul’ cuttings were significantly promoted by the three supplementary light sources. Of the three, MH was identified as the optimal supplementary light source.

scholarly journals Different LED Light Wavelengths and Photosynthetic Photon Flux Density Effect on Colletotrichum acutatum Growth

Plants ◽  
2022 ◽  
Vol 11 (1) ◽  
pp. 143
Author(s):  
Neringa Rasiukevičiūtė ◽  
Aušra Brazaitytė ◽  
Viktorija Vaštakaitė-Kairienė ◽  
Alma Valiuškaitė
Keyword(s):  
Flux Density ◽  
Photosynthetic Photon Flux Density ◽  
Growth Characteristics ◽  
Colletotrichum Acutatum ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Photosynthetic Photon Flux ◽  
Light Emitting ◽  
Led Light ◽  
Fungus Growth

The study aimed to evaluate the effect of different photon flux density (PFD) and light-emitting diodes (LED) wavelengths on strawberry Colletotrichum acutatum growth characteristics. The C. acutatum growth characteristics under the blue 450 nm (B), green 530 nm (G), red 660 nm (R), far-red 735 nm (FR), and white 5700 K (W) LEDs at PFD 50, 100 and 200 μmol m−2 s−1 were evaluated. The effect on C. acutatum mycelial growth evaluated by daily measuring until five days after inoculation (DAI). The presence of conidia and size (width and length) evaluated after 5 DAI. The results showed that the highest inhibition of fungus growth was achieved after 1 DAI under B and G at 50 μmol m−2 s−1 PFD. Additionally, after 1–4 DAI under B at 200 μmol m−2 s−1 PFD. The lowest conidia width was under FR at 50 μmol m−2 s−1 PFD and length under FR at 100 μmol m−2 s−1 PFD. Various LED light wavelengths influenced differences in C. acutatum colonies color. In conclusion, different photosynthetic photon flux densities and wavelengths influence C. acutatum growth characteristics. The changes in C. acutatum morphological and phenotypical characteristics could be related to its ability to spread and infect plant tissues. This study’s findings could potentially help to manage C. acutatum by LEDs in controlled environment conditions.

The value of red light at night for increasing basil yield

2018 ◽  
Vol 98 (6) ◽  
pp. 1321-1330
Author(s):  
Jaimin S. Patel ◽  
Leora Radetsky ◽  
Mark S. Rea
Keyword(s):  
Plant Height ◽  
Red Light ◽  
Leaf Size ◽  
Cost Effective ◽  
Dry Weight ◽  
Photosynthetic Photon Flux Density ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Light At Night ◽  
Sweet Basil

Sweet basil (Ocimum basilicum L.) is primarily used for culinary purposes, but it is also used in the fragrance and medicinal industries. In the last few years, global sweet basil production has been significantly impacted by downy mildew caused by Peronospora belbahrii Thines. Nighttime exposure to red light has been shown to inhibit sporulation of P. belbahrii. The objective of this study was to determine if nighttime exposure to red light from light-emitting diodes (λmax = 625 nm) could increase plant growth (plant height and leaf size) and yield (number and weight of leaves) in basil plants. In two sets of greenhouse experiments, red light was applied at a photosynthetic photon flux density of 60 μmol m−2 s−1 during the otherwise dark night for 10 h (from 2000 to 0600). The results demonstrate that exposure to red light at night can increase the number of basil leaves per plant, plant height, leaf size (length and width), and leaf fresh and dry weight compared with plants in darkness at night. The addition of incremental red light at night has the potential to be cost-effective for fresh organic basil production in controlled environments.

scholarly journals IN VITRO DEVELOPMENT OF YELLOW LAPACHO (BIGNONIACEAE) USING HIGH-POWER LIGHT EMITTING DIODE

2018 ◽  
Vol 42 (5) ◽  
Author(s):  
Ezequiel Enrique Larraburu ◽  
Gonzalo Sanchez Correa ◽  
Berta Elizabet Llorente
Keyword(s):  
In Vitro Culture ◽  
High Power ◽  
Stomatal Density ◽  
Light Emitting Diode ◽  
Dry Weight ◽  
Light Sources ◽  
Multiplication Rate ◽  
Light Emitting ◽  
Shoot Dry Weight

ABSTRACT Handroanthus ochraceus (yellow lapacho) is a medicinal, ornamental and timber tree which can be propagated by in vitro culture. Conventional methods use fluorescent lighting (FL), whereas light emitting diode (LED) has been used for this purpose only recently. The aim of this work was to evaluate the effects of FL and high-power LED (HP-LED) on the in vitro multiplication and rooting of yellow lapacho at different irradiances (15 to 60 µmol m-2s-1). Epicotyls obtained from half-siblings was multiplicated in WPM (Woody Plant Medium) supplemented with 20 µM benzilaminopurine and 1 mM IBA (indolebutiric acid). For rooting, shoots were cultured for 3 days in ½WPM supplemented with 50 µM IBA and for 42 days in auxin-free ½WPM under HP-LED or FL lighting. Under HP-LED, the multiplication rate of shoots increased significantly (61%) from 20 to 40 µmol m-2s-1 respect to FL. Differences in abaxial stomatal density and size were observed between light sources at 20 µmol m-2s-1. High HP-LED irradiance produced the highest rooting percentage. In the rooting stage, the marginal means of treatments without factors interaction showed that HP-LED irradiances significantly increased shoot length by 20%, shoot fresh weight by 77% and shoot dry weight by 30% in comparison to the values under FL. The maximum values calculated from the regression curves were around 50 µmol m-2 s-1 for HP-LED for all parameters except root lenght whereas were around 20 µmol m-2 s-1 for FL for all parameters except fresh and dry weigth of shoot. Here we show that HP-LED lighting improve in vitro culture of H. ochraceus, reduced 81% energy consumption respect to FL and uses only a multispectral LED instead of different single color LEDs. Therefore, HP-LED could be useful for the micropropagation of tree species contributing to sustainable agriculture and ecological restoration of degraded areas.

In vitro culture of Chrysanthemum plantlets using light-emitting diodes

2008 ◽  
Vol 3 (2) ◽  
pp. 161-167 ◽  
Author(s):  
Anželika Kurilčik ◽  
Renata Miklušytė-Čanova ◽  
Stasė Dapkūnienė ◽  
Silva Žilinskaitė ◽  
Genadij Kurilčik ◽  
...  
Keyword(s):  
Light Emitting Diodes ◽  
Spectral Component ◽  
Dry Weight ◽  
Chrysanthemum Morifolium ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Shoot Height ◽  
Light Emitting ◽  
Blue Component

AbstractEffects of illumination spectrum on the morphogenesis of chrysanthemum plantlets (Chrysanthemum morifolium Ramat. ‘Ellen’) grown in vitro were studied using an illumination system consisting of four groups of light-emitting diodes (LEDs) in the following spectral regions: blue (450nm), red (640nm), red (660nm), and far-red (735nm). Taking into account all differences in shoot height, root length, and fresh and dry weight (FW and DW, respectively), observed while changing the total photon flux density (PFD), the optimal total PFD for growth of chrysanthemum plantlets in vitro was estimated. For 16 h photoperiod and typical fractions of the spectral components (14%, 50%, 28%, and 8%, respectively), the optimal total PFD was found to be 40 µmol m−2 s−1. Our study shows that the blue component in the illumination spectrum inhibits the plantlet extension and formation of roots and simultaneously increases the DW to FW ratio and content of photosynthetic pigments. We demonstrate photomorphogenetic effects in the blue region and its interaction with the fractional PFD of the far-red spectral component. Under constant fractional PFD of the blue component, the root number, length of roots and stems, and fresh weight of the plantlets have a correlated nonmonotonous dependence on the fractional PFD of the far-red component.

Effects of CO2 enrichment on growth of Liquidambarstyraciflua and Pinustaeda seedlings under different irradiance levels

1984 ◽  
Vol 14 (3) ◽  
pp. 343-350 ◽  
Author(s):  
Leslie C. Tolley ◽  
B. R. Strain
Keyword(s):  
Loblolly Pine ◽  
Atmospheric Carbon Dioxide ◽  
Co2 Enrichment ◽  
Dry Weight ◽  
Photosynthetic Photon Flux Density ◽  
High Irradiance ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Dry Matter Accumulation ◽  
Pine Seedlings

Mathematical growth analysis techniques were used to assess the effects of atmospheric carbon dioxide enrichment on growth and biomass partitioning of Liquidambarstyraciflua L. (sweetgum) and Pinustaeda L. (loblolly pine) seedlings. Plants were grown from seed under high (1000 μmol•m−2•s−1) and low (250 μmol•m−2•s−1) photosynthetic photon flux density at CO2 concentrations of 350, 675, and 1000 μL•L−1 for 84 or 112–113 days. Elevated atmospheric CO2 concentration significantly increased height, leaf area, basal stem diameter, and total dry weight of sweetgum seedlings grown under high irradiance and to a lesser extent under low irradiance. Increases in dry matter accumulation were associated with early CO2 enhancement of net assimilation rate, but increases in amount of leaf surface area contributed more towards maintenance of larger size as seedlings aged. For sweetgum seedlings in particular, reduction of growth by low irradiance under normal atmospheric CO2 was compensated for by growing plants with elevated CO2. In contrast, elevated CO2 concentration produced no significant increase in growth of loblolly pine seedlings.

scholarly journals Light Intensity and Quality from Sole-source Light-emitting Diodes Impact Growth, Morphology, and Nutrient Content of Brassica Microgreens

HortScience ◽  
2016 ◽  
Vol 51 (5) ◽  
pp. 497-503 ◽  
Author(s):  
Joshua R. Gerovac ◽  
Joshua K. Craver ◽  
Jennifer K. Boldt ◽  
Roberto G. Lopez
Keyword(s):  
Light Emitting Diodes ◽  
Dry Weight ◽  
Nutrient Content ◽  
Sole Source ◽  
Photon Flux ◽  
Light Sources ◽  
Growth Morphology ◽  
Hypocotyl Length ◽  
Photoelectric Conversion ◽  
Light Emitting

Multilayer vertical production systems using sole-source (SS) lighting can be used for the production of microgreens; however, traditional SS lighting methods can consume large amounts of electrical energy. Light-emitting diodes (LEDs) offer many advantages over conventional light sources, including high photoelectric conversion efficiencies, narrowband spectral light quality (LQ), low thermal output, and adjustable light intensities (LIs). The objective of this study was to quantify the effects of SS LEDs of different light qualities and intensities on growth, morphology, and nutrient content of Brassica microgreens. Purple kohlrabi (Brassica oleracea L. var. gongylodes L.), mizuna (Brassica rapa L. var. japonica), and mustard [Brassica juncea (L.) Czern. ‘Garnet Giant’] were grown in hydroponic tray systems placed on multilayer shelves in a walk-in growth chamber. A daily light integral (DLI) of 6, 12, or 18 mol·m−2·d−1 was achieved from commercially available SS LED arrays with light ratios (%) of red:green:blue 74:18:8 (R74:G18:B8), red:blue 87:13 (R87:B13), or red:far-red:blue 84:7:9 (R84:FR7:B9) with a total photon flux (TPF) from 400 to 800 nm of 105, 210, or 315 µmol·m−2·s−1 for 16 hours. Regardless of LQ, as the LI increased from 105 to 315 µmol·m−2·s−1, hypocotyl length (HL) decreased and percent dry weight (DW) increased for kohlrabi, mizuna, and mustard microgreens. With increasing LI, leaf area (LA) of kohlrabi generally decreased and relative chlorophyll content (RCC) increased. In addition, nutrient content increased under low LIs regardless of LQ. The results from this study can help growers to select LIs and LQs from commercially available SS LEDs to achieve preferred growth characteristics of Brassica microgreens.

scholarly journals Light-emitting Diodes Can Replace High-pressure Sodium Lighting for Cut Gerbera Production

HortScience ◽  
2019 ◽  
Vol 54 (1) ◽  
pp. 95-99 ◽  
Author(s):  
Dave Llewellyn ◽  
Katherine Schiestel ◽  
Youbin Zheng
Keyword(s):  
High Pressure ◽  
Treatment Effects ◽  
Light Emitting Diode ◽  
Photosynthetic Photon Flux Density ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Vase Life ◽  
Light Emitting ◽  
Greenhouse Study ◽  
Flower Diameter

A greenhouse study was undertaken to investigate whether light-emitting diode (LED) technology can be used to replace high-pressure sodium (HPS) lighting for cut gerbera production during Canada’s traditional supplemental lighting (SL) season (November to March). The study was carried out at the University of Guelph’s research greenhouse, using concurrent replications of SL treatments within the same growing environment. LED (85% red, 15% blue) and HPS treatment plots were set up to provide equal amounts of supplemental photosynthetically active radiation (PAR) at bench level. This setup was used to assess the production of three cultivars of cut gerbera (Gerbera jamesonii H. Bolus ex Hook.f): Acapulco, Heatwave, and Terra Saffier. There were no treatment differences in SL intensity, with average SL photosynthetic photon flux density (PPFD) and daily light integral (DLI) of 55.9 µmol·m−2·s−1 and 2.3 mol·m−2·d−1, respectively. Flowers harvested from the LED treatment had a 1.9% larger flower diameter in ‘Acapulco’; 4.2% shorter and 3.8% longer stems in ‘Heatwave’ and ‘Terra Saffier’, respectively; and 7.7% and 8.6% higher fresh weights for ‘Acapulco’ and ‘Terra Saffier’, respectively, compared with flowers harvested from the HPS treatment. There were no differences in accumulated total or marketable flower harvests for any of the cultivars. The vase life of ‘Acapulco’ flowers grown under the LED treatment was 2.7 d longer than those grown under the HPS treatment, but there were no SL treatment effects on water uptake for any of the cultivars during the vase life trials. There were no SL treatment effects on specific leaf area for any of the cultivars. There were only minimal treatment differences in leaf, soil, and air temperatures. Cut gerbera crops grown with under LED SL had equivalent or better production and crop quality metrics compared with crops grown under HPS SL.

scholarly journals Interaction of Light Intensity and CO2 Concentration Alters Biomass Partitioning in Chrysanthemum

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Maral Hosseinzadeh ◽  
Sasan Aliniaeifard ◽  
Aida Shomali ◽  
Fardad Didaran
Keyword(s):  
Light Intensity ◽  
Growth Management ◽  
Growth Yield ◽  
Dry Weight ◽  
Co2 Concentration ◽  
Photosynthetic Photon Flux Density ◽  
Biomass Partitioning ◽  
Photon Flux ◽  
Photon Flux Density ◽  
Vegetative Organs

Abstract Biomass partitioning is one of the pivotal determinants of crop growth management, which is influenced by environmental cues. Light and CO2 are the main drivers of photosynthesis and biomass production in plants. In this study, the effects of CO2 levels: ambient 400 ppm (a[CO2]) and elevated to 1,000 ppm (e[CO2]) and different light intensities (75, 150, 300, 600 μmol·m−2·s−1 photosynthetic photon flux density – PPFD) were studied on the growth, yield, and biomass partitioning in chrysanthemum plants. The plants grown at higher light intensity had a higher dry weight (DW) of both the vegetative and floral organs. e[CO2] diminished the stimulating effect of more intensive light on the DW of vegetative organs, although it positively influenced inflorescence DW. The flowering time in plants grown at e[CO2] and light intensity of 600 μmol·m−2·s−1 occurred earlier than that of plants grown at a[CO2]. An increase in light intensity induced the allocation of biomass to inflorescence and e[CO2] enhanced the increasing effect of light on the partitioning of biomass toward the inflorescence. In both CO2 concentrations, the highest specific leaf area (SLA) was detected under the lowest light intensity, especially in plants grown at e[CO2]. In conclusion, elevated light intensity and CO2 direct the biomass toward inflorescence in chrysanthemum plants.

Sign in / Sign up

Export Citation Format

Share Document