scholarly journals An Air Spring Vibration Isolator Based on a Negative-Stiffness Structure for Vehicle Seat

2021 ◽  
Vol 11 (23) ◽  
pp. 11539
Author(s):  
Cong Hung Nguyen ◽  
Cong Minh Ho ◽  
Kyoung Kwan Ahn
Keyword(s):  
Vibration Isolation ◽  
Dynamic Stiffness ◽  
Low Frequency ◽  
Negative Stiffness ◽  
Vibration Isolator ◽  
Air Spring ◽  
Nonlinear Force ◽  
Mechanical Spring ◽  
Negative Stiffness Mechanism ◽  
Vehicle Seat

This research introduces an air spring vibration isolator system (ASVIS) based on a negative-stiffness structure (NSS) to improve the vehicle seat’s vibration isolation performance at low excitation frequencies. The main feature of the ASVIS consists of two symmetric bellows-type air springs which were designed on the basis of a negative stiffness mechanism. In addition, a crisscross structure with two straight bars was also used as the supporting legs to provide the nonlinear characteristics with NSS. Moreover, instead of using a vertical mechanical spring, a sleeve-type air spring was employed to provide positive stiffness. As a result, as the weight of the driver varies, the dynamic stiffness of the ASVIS can be easily adjusted and controlled. Next, the effects of the dimension parameters on the nonlinear force and nonlinear stiffness of ASVIS were analyzed. A design process for the ASVIS is provided based on the analytical results in order to achieve high static–low dynamic stiffness. Finally, numerical simulations were performed to evaluate the effectiveness of the ASVIS. The results obtained in this paper show that the values of the seat displacement of the ASVIS with NSS were reduced by 77.16% in comparison with those obtained with the traditional air spring isolator without NSS, which indicates that the design of the ASVIS isolator with NSS allows the effective isolation of vibrations in the low-frequency region.

The design of negative stiffness spring for precision vibration isolation using axially magnetized permanent magnet rings

2019 ◽  
Vol 25 (19-20) ◽  
pp. 2667-2677 ◽  
Author(s):  
Zhenhua Zhou ◽  
Shuhan Chen ◽  
Dun Xia ◽  
Jianjun He ◽  
Peng Zhang
Keyword(s):  
Vibration Isolation ◽  
Dynamic Stiffness ◽  
Low Frequency ◽  
Design Procedure ◽  
Air Gap ◽  
Negative Stiffness ◽  
Linear Component ◽  
Vibration Isolator ◽  
Stiffness Characteristic ◽  
Isolation Performance

A negative stiffness element is always employed to generate high-static–low-dynamic stiffness characteristic of the vibration isolator, reduce the resonance frequency of the isolator, and improve the vibration isolation performance under low and ultra-low frequency excitation. In this paper, a new compact negative stiffness permanent magnetic spring (NSPMS) that is composed of two axial-magnetized permanent magnetic rings is proposed. An analytical expression of magnetic negative stiffness of the NSPMS is deduced by using the Coulombian model. After analyzing the effect of air-gap width, air-gap position, height difference between the inner ring and outer ring on the negative stiffness characteristic, a design procedure is proposed to realize the negative stiffness characteristic with a global minimum linear component and uniformity stiffness near the equilibrium position. Finally, an experimental prototype is developed to validate the effectiveness of the NSPMS. The experimental results show that combining a vibration isolator with the NSPMS in parallel can lower the natural frequency and improve the isolation performance of the isolator.

scholarly journals An Ultra-Low Frequency Two DOFs’ Vibration Isolator Using Positive and Negative Stiffness in Parallel

2016 ◽  
Vol 2016 ◽  
pp. 1-15 ◽  
Author(s):  
Min Wang ◽  
Xuedong Chen ◽  
Xiaoqing Li
Keyword(s):  
Natural Frequency ◽  
Vibration Isolation ◽  
Dynamic Stiffness ◽  
Low Frequency ◽  
Vertical Direction ◽  
Negative Stiffness ◽  
Effective Bandwidth ◽  
Vibration Isolator ◽  
Analysis System ◽  
The Stability

With the improvement of performance in the ultra-precision manufacturing engineering, the requirements for vibration isolation have become increasingly stringent. In order to get wider effective bandwidth and higher performance of vibration isolation in multiple DOFs system, an ultra-low frequency two DOFs’ vibration isolator with positive and negative stiffness in parallel (PNSP) is proposed. The two DOFs’ isolator which combines a positive stiffness (PS) air spring with a negative stiffness (NS) magnetic spring in parallel and combines a PS flat spring with an NS inverted pendulum in parallel is designed to reduce the natural frequency and broaden the effective bandwidth in horizontal and vertical direction. Based on this structure, stiffness models of different components in different directions are established. Compared with a PS isolator, it possesses the characteristic of high-static-low-dynamic stiffness. The simulation curves also provide strong evidence. Last, a real-time active control system and a spectrum testing and analysis system are used for the contrast experiment between the mentioned PNSP structure and PS only. The experimental results demonstrate that the isolator with PNSP can obviously reduce the natural frequency to 1 Hz and simultaneously maintain the stability of the system and consequently verify the validity and superiority of the mentioned structure.

Design of a Miniaturized Pneumatic Vibration Isolator With High-Static-Low-Dynamic Stiffness

2015 ◽  
Vol 137 (4) ◽  
Author(s):  
Yuhu Shan ◽  
Wenjiang Wu ◽  
Xuedong Chen
Keyword(s):  
Vibration Isolation ◽  
Dynamic Stiffness ◽  
Structure Design ◽  
Negative Stiffness ◽  
Vibration Isolator ◽  
Load Bearing Capacity ◽  
Compact Structure ◽  
Chamber Volume ◽  
Isolation Systems ◽  
Magnetic Rings

In the ultraprecision vibration isolation systems, it is desirable for the isolator to have a larger load bearing capacity and a broader isolation bandwidth simultaneously. Generally, pneumatic spring can bear large load and achieve relatively low natural frequency by enlarging its chamber volume. However, the oversized isolator is inconvenient to use and might cause instability. To reduce the size, a miniaturized pneumatic vibration isolator (MPVI) with high-static-low-dynamic stiffness (HSLDS) is developed in this paper. The volume of proposed isolator is minimized by a compact structure design that combines two magnetic rings in parallel with the pneumatic spring. The two magnetic rings are arranged in the repulsive configuration and can be mounted into the chamber to provide the negative stiffness. Then dynamic model of the developed MPVI is built and the isolation performances are analyzed. Finally, experiments on the isolator with and without the magnetic rings are conducted. The final experimental results are consistent with the dynamical model and verify the effectiveness of the developed vibration isolator.

On the Effects of Mistuning a Force-Excited System Containing a Quasi-Zero-Stiffness Vibration Isolator

2015 ◽  
Vol 137 (4) ◽  
Author(s):  
Ali Abolfathi ◽  
M. J. Brennan ◽  
T. P. Waters ◽  
B. Tang
Keyword(s):  
Vibration Isolation ◽  
Dynamic Stiffness ◽  
Low Frequency ◽  
Vibration Isolator ◽  
Linear Vibration ◽  
Vibration Isolators ◽  
Zero Dynamic ◽  
Low Frequency Vibration ◽  
Excited System ◽  
Better Than

Nonlinear isolators with high-static-low-dynamic-stiffness have received considerable attention in the recent literature due to their performance benefits compared to linear vibration isolators. A quasi-zero-stiffness (QZS) isolator is a particular case of this type of isolator, which has a zero dynamic stiffness at the static equilibrium position. These types of isolators can be used to achieve very low frequency vibration isolation, but a drawback is that they have purely hardening stiffness behavior. If something occurs to destroy the symmetry of the system, for example, by an additional static load being applied to the isolator during operation, or by the incorrect mass being suspended on the isolator, then the isolator behavior will change dramatically. The question is whether this will be detrimental to the performance of the isolator and this is addressed in this paper. The analysis in this paper shows that although the asymmetry will degrade the performance of the isolator compared to the perfectly tuned case, it will still perform better than the corresponding linear isolator provided that the amplitude of excitation is not too large.

scholarly journals Dynamically variable negative stiffness structures

2016 ◽  
Vol 2 (2) ◽  
pp. e1500778 ◽  
Author(s):  
Christopher B. Churchill ◽  
David W. Shahan ◽  
Sloan P. Smith ◽  
Andrew C. Keefe ◽  
Geoffrey P. McKnight
Keyword(s):  
Vibration Isolation ◽  
Dynamic Stiffness ◽  
Low Frequency ◽  
Variable Stiffness ◽  
Negative Stiffness ◽  
Load Bearing ◽  
Vibration Isolators ◽  
Wide Range ◽  
Engineered Systems ◽  
Tunable Stiffness

Variable stiffness structures that enable a wide range of efficient load-bearing and dexterous activity are ubiquitous in mammalian musculoskeletal systems but are rare in engineered systems because of their complexity, power, and cost. We present a new negative stiffness–based load-bearing structure with dynamically tunable stiffness. Negative stiffness, traditionally used to achieve novel response from passive structures, is a powerful tool to achieve dynamic stiffness changes when configured with an active component. Using relatively simple hardware and low-power, low-frequency actuation, we show an assembly capable of fast (<10 ms) and useful (>100×) dynamic stiffness control. This approach mitigates limitations of conventional tunable stiffness structures that exhibit either small (<30%) stiffness change, high friction, poor load/torque transmission at low stiffness, or high power active control at the frequencies of interest. We experimentally demonstrate actively tunable vibration isolation and stiffness tuning independent of supported loads, enhancing applications such as humanoid robotic limbs and lightweight adaptive vibration isolators.

scholarly journals Research on a nonlinear quasi-zero stiffness vibration isolator with a vibration absorber

2020 ◽  
Vol 103 (3) ◽  
pp. 003685042094089
Author(s):  
Shao-Hua Li ◽  
Nan Liu ◽  
Hu Ding
Keyword(s):  
Frequency Response ◽  
Vibration Isolation ◽  
Low Frequency ◽  
Vibration Absorber ◽  
Vibration Isolator ◽  
Dynamic Vibration Absorber ◽  
Amplitude Frequency Response ◽  
Low Frequency Vibration ◽  
Response Equation ◽  
Negative Stiffness Mechanism

A negative stiffness mechanism consisting of a spring and cylinder is proposed, and a grounded dynamic vibration absorber is designed based on a quasi-zero stiffness vibration isolator to constitute the vibration isolator with a vibration absorber system. The range of parameters for attaining zero stiffness is derived from static analysis. The dynamic analysis of the vibration isolator with a vibration absorber system is carried out by a multiscale method, and the amplitude–frequency response equation of the system is obtained. The influence of different system parameters on the amplitude–frequency response is analyzed. The amplitude–frequency response of the quasi-zero stiffness vibration isolator is compared with that of the vibration isolator with a vibration absorber, and the linear and nonlinear analytical solutions of the vibration isolator with a vibration absorber system are also compared. The results show that the designed vibration isolator with a vibration absorber is an ideal choice for low-frequency vibration isolation, with no large resonance peak throughout the system and significantly improved reliability of the system.

scholarly journals Design and Theoretical Analysis of High-Static-Low-Dynamic Stiffness Torsion Vibration Isolator Based on Oblique Springs

2021 ◽  
Vol 2101 (1) ◽  
pp. 012028
Author(s):  
Zhirong Yang ◽  
Lintao Li ◽  
Jiacheng Yao ◽  
Qingkai Wang
Keyword(s):  
Harmonic Balance ◽  
Vibration Isolation ◽  
Dynamic Stiffness ◽  
Low Frequency ◽  
Vibration Isolator ◽  
Torsion Vibration ◽  
Low Frequency Vibration ◽  
Torsion Stiffness ◽  
Ihb Method ◽  
Peak Value

Abstract A torsion vibration isolator composed of oblique springs with high-static-low-dynamic stiffness (HSLDS) is proposed to attenuate the transmission of torsion vibration along the shipping shaft in this paper. It is good at in low frequency vibration isolation as it can significantly reduce the resonance frequency of the system with the same load capability. Firstly, the model of HSLDS torsion vibration isolator is introduced in this paper. Secondly, the non-dimensional torsion stiffness is formulated using mechanics theory, and the HSLDS characteristic of designed torsion vibration isolator is verified. Finally, the torque transmissibility is analyzed using the Increment Harmonic Balance (IHB) method, and the effects of the system parameters on it are analyzed. The results show that the resonant frequency increases accordingly as the stiffness ratio and the excitation torque are increased. However, the peak value of the torsion transmissibility is decreased as the damper ratio increasing.

Sign in / Sign up

Export Citation Format

Share Document