scholarly journals High Proton Conducting Polymer Blend Electrolytes Based on Chitosan:Dextran with Constant Specific Capacitance and Energy Density

Biomolecules ◽  
2019 ◽  
Vol 9 (7) ◽  
pp. 267 ◽  
Author(s):  
Shujahadeen B. Aziz ◽  
M. H. Hamsan ◽  
Wrya O. Karim ◽  
M. F. Z. Kadir ◽  
M. A. Brza ◽  
...  
Keyword(s):  
Cyclic Voltammetry ◽  
Energy Density ◽  
Specific Capacitance ◽  
Polymer Blend ◽  
Linear Sweep Voltammetry ◽  
Transference Number ◽  
Ammonium Fluoride ◽  
Constant Current ◽  
Discharge Process ◽  
Charge Discharge

Polymer blend electrolytes based on chitosan: dextran (CS:Dext) incorporated with various amounts of ammonium fluoride (NH4F) with constant specific capacitance (12.4 F/g) and energy density over 100 cycles were prepared using a solution cast technique. The blend electrolyte samples exhibit broader amorphous humps in X-ray diffraction (XRD) spectra compared to pure CS:Dext film. The Fourier transform infrared (FTIR) study indicates the complex formation of the added ammonium salt with the polymer blend functional groups through the shifting and decrease in the intensity of FTIR bands. The impedance plots were used to determine the conductivity of the samples. The field emission scanning electron microscopy (FESEM) images support the conductivity behavior of the samples. The impedance plots were applied in the determination of the conductivity of the samples in which the relatively highest conductivity was gained to be 1 × 10−3 S/cm. The transference number measurement (TNM) of the conducting electrolyte was 0.88, which portrays the dominancy of ion in the conduction process. Linear sweep voltammetry (LSV) verified the chemical stability and showed it to be 1.7 V and an effective electrical double layer capacitor (EDLC) that is applicable in electrochemical devices. The performance of the EDLC cell was examined using both cyclic voltammetry and constant current charge–discharge techniques at ambient temperature. The semi-rectangular shape of the cyclic voltammetry (CV) plot and no redox peak was observed. The charge-discharge process of the fabricated EDLC is durable over 100 cycles with an equivalent circuit resistance and power density of 194.5 Ω and 428 W/kg, respectively. Two main outcomes, the specific capacitance and energy densities of 12.4 Farad/g and 1.4 Wh/kg, respectively, are almost constant over 100 cycles.

scholarly journals A Promising Polymer Blend Electrolytes Based on Chitosan: Methyl Cellulose for EDLC Application with High Specific Capacitance and Energy Density

Molecules ◽  
2019 ◽  
Vol 24 (13) ◽  
pp. 2503 ◽  
Author(s):  
Shujahadeen B. Aziz ◽  
M. H. Hamsan ◽  
Ranjdar M. Abdullah ◽  
M. F. Z. Kadir
Keyword(s):  
Energy Density ◽  
Specific Capacitance ◽  
Double Layer ◽  
Polymer Blend ◽  
Electrochemical Techniques ◽  
High Specific Capacitance ◽  
Transference Number ◽  
Constant Current ◽  
Equivalent Series Resistance ◽  
Charge Discharge

In the present work, promising proton conducting solid polymer blend electrolytes (SPBEs) composed of chitosan (CS) and methylcellulose (MC) were prepared for electrochemical double-layer capacitor (EDLC) application with a high specific capacitance and energy density. The change in intensity and the broad nature of the XRD pattern of doped samples compared to pure CS:MC system evidencedthe amorphous character of the electrolyte samples. The morphology of the samples in FESEM images supported the amorphous behavior of the solid electrolyte films. The results of impedance and Bode plotindicate that the bulk resistance decreasedwith increasing salt concentration. The highest DC conductivity was found to be 2.81 × 10−3 S/cm. The electrical equivalent circuit (EEC) model was conducted for selected samples to explain the complete picture of the electrical properties.The performance of EDLC cells was examined at room temperature by electrochemical techniques, such as impedance spectroscopy, cyclic voltammetry (CV) and constant current charge–discharge techniques. It was found that the studied samples exhibit a very good performance as electrolyte for EDLC applications. Ions were found to be the dominant charge carriers in the polymer electrolyte. The ion transference number (tion) was found to be 0.84 while 0.16 for electron transference number (tel). Through investigation of linear sweep voltammetry (LSV), the CS:MC:NH4SCN system was found to be electrochemically stable up to 1.8 V. The CV plot revealed no redox peak, indicating the occurrence of charge double-layer at the surface of activated carbon electrodes. Specific capacitance (Cspe) for the fabricated EDLC was calculated using CV plot and charge–discharge analyses. It was found to be 66.3 F g−1 and 69.9 F g−1 (at thefirst cycle), respectively. Equivalent series resistance (Resr) of the EDLC was also identified, ranging from 50.0 to 150.0 Ω. Finally, energy density (Ed) was stabilized to anaverage of 8.63 Wh kg−1 from the 10th cycle to the 100th cycle. The first cycle obtained power density (Pd) of 1666.6 W kg−1 and then itdropped to 747.0 W kg−1 at the 50th cycle and continued to drop to 555.5 W kg−1 as the EDLC completed 100 cycles.

scholarly journals From Cellulose, Shrimp and Crab Shells to Energy Storage EDLC Cells: The Study of Structural and Electrochemical Properties of Proton Conducting Chitosan-Based Biopolymer Blend Electrolytes

Polymers ◽  
2020 ◽  
Vol 12 (7) ◽  
pp. 1526 ◽  
Author(s):  
Shujahadeen B. B. Aziz ◽  
Muhamad. H. H. Hamsan ◽  
Muaffaq M. M. Nofal ◽  
Saro San ◽  
Rebar T. Abdulwahid ◽  
...  
Keyword(s):  
Specific Capacitance ◽  
High Efficiency ◽  
Electrochemical Impedance ◽  
Linear Sweep Voltammetry ◽  
Transference Number ◽  
Ammonium Fluoride ◽  
Amorphous Region ◽  
Internal Resistance ◽  
Solid Polymer ◽  
Electrical Equivalent Circuit

In this study, solid polymer blend electrolytes (SPBEs) based on chitosan (CS) and methylcellulose (MC) incorporated with different concentrations of ammonium fluoride (NH4F) salt were synthesized using a solution cast technique. Both Fourier transformation infrared spectroscopy (FTIR) and X-ray diffraction (XRD) results confirmed a strong interaction and dispersion of the amorphous region within the CS:MC system in the presence of NH4F. To gain better insights into the electrical properties of the samples, the results of electrochemical impedance spectroscopy (EIS) were analyzed by electrical equivalent circuit (EEC) modeling. The highest conductivity of 2.96 × 10−3 S cm−1 was recorded for the sample incorporated with 40 wt.% of NH4F. Through transference number measurement (TNM) analysis, the fraction of ions was specified. The electrochemical stability of the electrolyte sample was found to be up to 2.3 V via the linear sweep voltammetry (LSV) study. The value of specific capacitance was determined to be around 58.3 F/g. The stability test showed that the electrical double layer capacitor (EDLC) system can be recharged and discharged for up to 100 cycles with an average specific capacitance of 64.1 F/g. The synthesized EDLC cell was found to exhibit high efficiency (90%). In the 1st cycle, the values of internal resistance, energy density and power density of the EDLC cell were determined to be 65 Ω, 9.3 Wh/kg and 1282 W/kg, respectively.

scholarly journals Fabrication of Hierarchical NiMoO4/NiMoO4 Nanoflowers on Highly Conductive Flexible Nickel Foam Substrate as a Capacitive Electrode Material for Supercapacitors with Enhanced Electrochemical Performance

Energies ◽  
2019 ◽  
Vol 12 (6) ◽  
pp. 1143 ◽  
Author(s):  
Anil Yedluri ◽  
Tarugu Anitha ◽  
Hee-Je Kim
Keyword(s):  
Energy Density ◽  
Electrochemical Performance ◽  
Specific Capacitance ◽  
Electrode Material ◽  
High Performance ◽  
Nickel Foam ◽  
High Specific Capacitance ◽  
High Energy ◽  
High Energy Density ◽  
Charge Discharge

Hierarchical NiMoO4/NiMoO4 nanoflowers were fabricated on highly conductive flexible nickel foam (NF) substrates using a facile hydrothermal method to achieve rapid charge-discharge ability, high energy density, long cycling lifespan, and higher flexibility for high-performance supercapacitor electrode materials. The synthesized composite electrode material, NF/NiMoO4/NiMoO4 with a nanoball-like NF/NiMoO4 structure on a NiMoO4 surface over a NF substrate, formed a three-dimensional interconnected porous network for high-performance electrodes. The novel NF/NiMoO4/NiMoO4 nanoflowers not only enhanced the large surface area and increased the electrochemical activity, but also provided an enhanced rapid ion diffusion path and reduced the charge transfer resistance of the entire electrode effectively. The NF/NiMoO4/NiMoO4 composite exhibited significantly improved supercapacitor performance in terms of a sustained cycling life, high specific capacitance, rapid charge-discharge capability, high energy density, and good rate capability. Electrochemical analysis of the NF/NiMoO4/NiMoO4 nanoflowers fabricated on the NF substrate revealed ultra-high electrochemical performance with a high specific capacitance of 2121 F g−1 at 12 mA g−1 in a 3 M KOH electrolyte and 98.7% capacitance retention after 3000 cycles at 14 mA g−1. This performance was superior to the NF/NiMoO4 nanoball electrode (1672 F g−1 at 12 mA g−1 and capacitance retention 93.4% cycles). Most importantly, the SC (NF/NiMoO4/NiMoO4) device displayed a maximum energy density of 47.13 W h kg−1, which was significantly higher than that of NF/NiMoO4 (37.1 W h kg−1). Overall, the NF/NiMoO4/NiMoO4 composite is a suitable material for supercapacitor applications.

scholarly journals Characteristics of Glycerolized Chitosan: NH4NO3-Based Polymer Electrolyte for Energy Storage Devices with Extremely High Specific Capacitance and Energy Density Over 1000 Cycles

Polymers ◽  
2020 ◽  
Vol 12 (11) ◽  
pp. 2718
Author(s):  
Shujahadeen B. Aziz ◽  
M. A. Brza ◽  
Iver Brevik ◽  
M. H. Hamsan ◽  
Rebar T. Abdulwahid ◽  
...  
Keyword(s):  
Energy Storage ◽  
Energy Density ◽  
Polymer Electrolyte ◽  
Specific Capacitance ◽  
Electrochemical Techniques ◽  
High Specific Capacitance ◽  
Transference Number ◽  
Energy Storage Devices ◽  
Storage Devices ◽  
The Impact

In this work, plasticized polymer electrolyte films consisting of chitosan, ammonium nitrate (NH4NO3) and glycerol for utilization in energy storage devices was presented. Various microscopic, spectroscopic and electrochemical techniques were used to characterize the concerned electrolyte and the electrical double-layer capacitor (EDLC) assembly. The nature of complexation between the polymer electrolyte components was examined via X-ray diffraction analysis. In the morphological study, field emission scanning electron microscopy (FESEM) was used to investigate the impact of glycerol as a plasticizer on the morphology of films. The polymer electrolyte (conducting membrane) was found to have a conductivity of 3.21 × 10−3 S/cm. It is indicated that the number density (n), mobility (μ) and diffusion coefficient (D) of ions are increased with the glycerol amount. The mechanism of charge storing was clarified, which implies a non-Faradaic process. The voltage window of the polymer electrolyte is 2.32 V. It was proved that the ion is responsible for charge-carrying via measuring the transference number (TNM). It was also determined that the internal resistance of the EDLC assembly lay between 39 and 50 Ω. The parameters associated with the EDLC assembly are of great importance and the specific capacitance (Cspe) was determined to be almost constant over 1 to 1000 cycles with an average of 124 F/g. Other decisive parameters were found: energy density (18 Wh/kg) and power density (2700 W/kg).

scholarly journals Effect of Substrate Surface Roughening on the Capacitance and Cycling Stability of Ni(OH)2 Nanoarray Films

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Adulphan Pimsawat ◽  
Apishok Tangtrakarn ◽  
Nutsupa Pimsawat ◽  
Sujittra Daengsakul
Keyword(s):  
Stainless Steel ◽  
Cyclic Voltammetry ◽  
Specific Capacitance ◽  
Stainless Steel Substrate ◽  
Steel Substrate ◽  
Substrate Surface ◽  
Surface Roughening ◽  
Film Stability ◽  
Substrate Roughening ◽  
Charge Discharge

AbstractThe effect of substrate surface roughening on the capacitance of Ni(OH)2/NiOOH nanowall array samples produced via chemical bath deposition for 2, 4, 6, 24 and 48 h on an as-received stainless steel substrate and the same substrate after sandblasting has been investigated. Symmetric cells were subjected to 120,000 charge-discharge cycles to access changes in their capacitance. Specific capacitances were derived from cyclic voltammetry and charge-discharge cycling under a three electrode setup. Substrate roughening significantly increases the capacitance of symmetric cells and film stability since film exfoliation does not occur to the same degree as on the as-received substrate. Interestingly, films deposited on a roughened substrate for 6, 24 and 48 h also exhibit self-recovery of capacitance, which could be related to an electrodissolution-electrodeposition effect. With the use of a roughened substrate, the thinnest film gives the highest specific capacitance, 1456 F g−1, whilst the thickest one shows the highest areal capacitance, 235 mF cm−2, after 20,000 cycles. These results reveal the promise of surface roughening toward increasing the capacitance and stability of Ni(OH)2/NiOOH films.

scholarly journals Structural, Morphological, Electrical and Electrochemical Properties of PVA: CS-Based Proton-Conducting Polymer Blend Electrolytes

Membranes ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 71 ◽  
Author(s):  
Ayub Shahab Marf ◽  
Ranjdar M. Abdullah ◽  
Shujahadeen B. Aziz
Keyword(s):  
Polymer Blend ◽  
Structural Changes ◽  
Electrochemical Impedance ◽  
Low Frequency ◽  
Linear Sweep Voltammetry ◽  
Transference Number ◽  
Poly Vinyl Alcohol ◽  
X Ray Diffraction ◽  
The Relationship ◽  
Added Salt

Polymer blend electrolytes based on poly(vinyl alcohol):chitosan (PVA:CS) incorporated with various quantities of ammonium iodide were prepared and characterized using a range of electrochemical, structural and microscopic techniques. In the structural analysis, X-ray diffraction (XRD) was used to confirm the buildup of the amorphous phase. To reveal the effect of dopant addition on structural changes, field-emission scanning electron microscope (FESEM) was used. The protrusions of salt aggregates with large quantity were seen at the surface of the formed films at 50 wt.% of the added salt. The nature of the relationship between conductivity and dielectric properties was shown using electrochemical impedance spectroscopy (EIS). The EIS spectra were fitted with electrical equivalent circuits (EECs). It was observed that both dielectric constant and dielectric loss were high in the low-frequency region. For all samples, loss tangent and electric modulus plots were analyzed to become familiar with the relaxation behavior. Linear sweep voltammetry (LSV) and transference number measurement (TNM) were recorded. A relatively high cut-off potential for the polymer electrolyte was obtained at 1.33 V and both values of the transference number for ion (tion) and electronic (telec) showed the ion dominant as charge carrier species. The TNM and LSV measurements indicate the suitability of the samples for energy storage application if their conductivity can be more enhanced.

Electrodeposition of PANI/MnO2 Composite on SnO2/Ti Substrate for Supercapacitor Electrode

2011 ◽  
Vol 239-242 ◽  
pp. 1372-1375 ◽  
Author(s):  
Ya Kun Zhang ◽  
Jian Ling Li ◽  
Fei Gao ◽  
Xin Dong Wang
Keyword(s):  
Cyclic Voltammetry ◽  
Synergistic Effect ◽  
Specific Capacitance ◽  
Current Density ◽  
Galvanostatic Charge ◽  
Supercapacitor Electrode ◽  
Electrochemical Tests ◽  
A Current ◽  
Charge Discharge

A layer of MnO2 was loaded between the SnO2/Ti substrate and the layer of PANI via a potentiodynamic electrodeposition. Electrochemical tests such as cyclic voltammetry and galvanostatic charge/discharge were applied to investigate the performance of the electrodes. The morphologies of the electrodes were also observed to identify the effect of the MnO2 layer. The specific capacitance of PANI with MnO2 reached to 601.48 F g-1 at a current density of 0.1 mA cm-2, which is 1.69 times as that of PANI electrodes without MnO2 layer. This gratifying result may due to the synergistic effect between MnO2 layer and PANI.

MESOPOROUS CARBON ELECTRODE: SYNTHESIS, CHARACTERIZATION AND ELECTROCHEMICAL PROPERTIES

2010 ◽  
Vol 03 (03) ◽  
pp. 161-164 ◽  
Author(s):  
XI LONG ◽  
CHUNXIA ZHAO ◽  
WEN CHEN
Keyword(s):  
Cyclic Voltammetry ◽  
Electrochemical Properties ◽  
Mesoporous Carbon ◽  
Nitrogen Adsorption ◽  
Mesoporous Structure ◽  
Constant Current ◽  
Surface Areas ◽  
Constant Current Charge ◽  
Adsorption Desorption ◽  
Charge Discharge

The present paper studies a kind of mesoporous carbon (MC) with high electrochemical performance, which was prepared by vapor infiltration method. The microstructure and electrochemical properties of the mesoporous carbon were investigated by transmission electron microscopy (TEM), nitrogen adsorption–desorption isotherms, cyclic voltammetry (CV), constant current charge–discharge cycling (CD), and the long-term stability test. The results indicated that the mesoporous carbon has an ordered mesoporous structure, with pore size of about 3.87 nm and surface areas of 1087 m2 ⋅ g-1. The cyclic voltammetry curve reveals typical electrical double-layer capacitor property. After 200 cycles, the CV curves can almost be overlapped, which indicates excellent cycling stability. From the charge/discharge cycling, the specific capacitance of MC is 117 F ⋅ cm-1 in 1.0 M KNO3 electrolyte media at a scan rate of 1.0 mV ⋅ s-1, which decays with increasing current density. The charge–discharge efficiency also decays with it.

Synthesis of BCN Nanoparticles Sandwiched between Carbon Nanosheets and Performance in Electrochemical Capacitors

2015 ◽  
Vol 719-720 ◽  
pp. 137-140
Author(s):  
Ren Li Yang ◽  
Jun Shuang Zhou ◽  
Li Hou ◽  
Yu Feng Zhao ◽  
Fa Ming Gao
Keyword(s):  
Cyclic Voltammetry ◽  
Electrochemical Properties ◽  
Specific Capacitance ◽  
Current Density ◽  
Nitrogen Atmosphere ◽  
Galvanostatic Charge ◽  
Carbon Nanosheets ◽  
And Performance ◽  
Discharge Measurements ◽  
Charge Discharge

BCN nanoparticles sandwiched between carbon nanosheets were synthesized with the P123 and borate ammonium under nitrogen atmosphere. The samples were characterized by SEM, TEM, and EELS. The SEM and TEM images show BCN nanoparticles are attached on the carbon nanosheets. Cyclic voltammetry (CV) and galvanostatic charge-discharge measurements are used to evaluate electrochemical properties of the composites. The samples show the specific capacitance of 102 F/g at current density of 200mA/g and good durability.

Sign in / Sign up

Export Citation Format

Share Document