scholarly journals Influence of Waste Tire Particles on Freeze–Thaw Resistance and Impermeability Performance of Waste Tires/Sand-Based Autoclaved Aerated Concrete Composites

Buildings ◽  
2022 ◽  
Vol 12 (1) ◽  
pp. 33
Author(s):  
Chang Chen ◽  
Ruyi Zhang ◽  
Li Zhou ◽  
Yubin Wang

Waste tires/sand-based autoclaved aerated concrete (SAAC) composites were prepared by mixing waste tires, which have different particle sizes and content. The physical performance, mechanical properties, freeze–thaw resistance, impermeability performance, phase composition, and microstructure of waste tires/sand-based autoclaved aerated concrete composite materials were examined. The results demonstrated that the 750-μm-sized waste tire particles on the surface of the SAAC composite did not agglomerate. Moreover, these particles did not damage the pore structure of the composites. The SAAC composites, with a relatively high compressive strength and low mass-loss rate, were obtained when the contents of waste tire particles ranged from 1.0 to 2.5 wt.%. For composites prepared with 2.0 wt.% of 750-μm-sized waste tire particles, the optimal compressive and flexural strength values were 3.20 and 0.95 MPa, respectively. The increase in the rate of water absorption on SAAC composites was lowest (i.e., 16.3%) when the soaking time was from 24 to 120 h.

Galaxies ◽  
2018 ◽  
Vol 6 (3) ◽  
pp. 89
Author(s):  
Efrat Sabach

We study the effects of a reduced mass-loss rate on the evolution of low metallicity Jsolated stars, following our earlier classification for angular momentum (J) isolated stars. By using the stellar evolution code MESA we study the evolution with different mass-loss rate efficiencies for stars with low metallicities of Z = 0 . 001 and Z = 0 . 004 , and compare with the evolution with solar metallicity, Z = 0 . 02 . We further study the possibility for late asymptomatic giant branch (AGB)—planet interaction and its possible effects on the properties of the planetary nebula (PN). We find for all metallicities that only with a reduced mass-loss rate an interaction with a low mass companion might take place during the AGB phase of the star. The interaction will most likely shape an elliptical PN. The maximum post-AGB luminosities obtained, both for solar metallicity and low metallicities, reach high values corresponding to the enigmatic finding of the PN luminosity function.


2014 ◽  
Vol 1044-1045 ◽  
pp. 624-628
Author(s):  
Jie Quan Xing ◽  
Shu Lin Zhan ◽  
Xin Yu Li

This paper studies the influence on compressive strength, freezing resistance and microstructure of cement mortar with different content of mica in stone powder, in the tests, manufactured sand with high content of mica and natural river sand were mixed with different proportion, and the content of stone powder was the same in mixed sand. Experiment results indicate that, with the increasing of mica content in stone powder, 28d and 60d compressive strength of cement mortar decreases obvious, mass loss rate and strength loss rate with 50 freeze-thaw cycles increase a little. Microstructure of cement mortar with higher content of mica is not compactly by SEM, the internal defects of cement hardened pastes could be increased because of the flake mica which surface is smooth, and it will cause the spread of micro crack.


1995 ◽  
Vol 151 ◽  
pp. 195-196
Author(s):  
Roberto Minarini ◽  
Grigory Beskin

Low-mass main sequence stars show a magnetic activity similar to the Sun and as a consequence they lose mass in the form of a variable stellar wind. In the latest spectral types (red dwarfs) the activity and the mass loss rate appear to increase by a large factor of ∼ 103 with respect to the solar case, reaching Ṁ ∼ 2 · 10−11 M⊙/yr (Badalyan & Livshits 1992, Katsova 1993). The same happens for coronal mass ejections (CMEs), which are the most relevant transient events of mass loss in these objects. In the Sun, these appear as bubbles of coronal material, with dimensions of some fraction of the solar surface, mass M ≃ 2 · 1014 - 2 · 1016 g and ejection velocity v ≃ 3 · 107 - 2 · 108 cm/s, with an instantaneous mass loss rate Ṁ ∽ 10−13 - 10−11 M⊙/yr (Wagner 1984). In red dwarfs, as recently observed, the ejection velocities are higher, up to v ≃ 3 · 108 cm/s and the mass loss rate can reach the value Ṁ ≃ 10−8 M⊙/yr (Mullan et al. 1989, Houdebine et al. 1990). In both cases, the observations suggest that a bubble expands, once ejected, with a velocity of several hundreds of km/s.


Author(s):  
Xinyu Cong ◽  
Yiqiu Tan ◽  
Shuang Lu ◽  
Zhaojia Wang ◽  
Tianyong Huang

AbstractSelf-ignition coal gangue (SCG) used as one of precursors to fabricate autoclaved aerated concrete (AAC). Aiming at studying water absorptivity and frost resistance performance of SCG-based AAC (SCGAAC), three-period water absorption tests and freeze-thaw tests were carried out and the corresponding results were recorded and analyzed. In order to modify the water absorptivity of SCGAAC, foam stabilizer was applied to adjust pore structure while calcium stearate was expected to change hydrophilic feature of SCG. It was demonstrated that the compressive strength of SCGAAC containing foam stabilizer or calcium stearate declined at different levels. For water absorption, foam stabilizer failed to decrease the water content and even increased water absorption rates. Calcium stearate controlled water absorption rate successfully although the ultimate water content hardly reduced. All of the SCGAAC samples exhibited intact appearance after 50 freeze-thaw cycles and showed excellent frost resistance performance. Three models were proposed to predict water absorptivity and frost resistance performance of SCGAAC and the corresponding prediction results matched test resulted well.


2018 ◽  
Vol 615 ◽  
pp. A28 ◽  
Author(s):  
L. Decin ◽  
A. M. S. Richards ◽  
T. Danilovich ◽  
W. Homan ◽  
J. A. Nuth

Context. Low and intermediate mass stars are known to power strong stellar winds when evolving through the asymptotic giant branch (AGB) phase. Initial mass, luminosity, temperature, and composition determine the pulsation characteristics of the star and the dust species formed in the pulsating photospheric layers. Radiation pressure on these grains triggers the onset of a stellar wind. However, as of today, we still cannot predict the wind mass-loss rates and wind velocities from first principles neither do we know which species are the first to condense in the upper atmospheric regions. Aims. We aim to characterise the dominant physical, dynamical, and chemical processes in the inner wind region of two archetypical oxygen-rich (C/O < 1) AGB stars, that is, the low mass-loss rate AGB star R Dor (Ṁ ~ 1 × 10−7 M⊙ yr−1) and the high mass-loss rate AGB star IK Tau (Ṁ ~ 5 × 10−6 M⊙ yr−1). The purpose of this study is to observe the key molecular species contributing to the formation of dust grains and to cross-link the observed line brightnesses of several species to the global and local properties of the star and its wind. Methods. A spectral line and imaging survey of IK Tau and R Dor was made with ALMA between 335 and 362 GHz (band 7) at a spatial resolution of ~150 mas, which corresponds to the locus of the main dust formation region of both targets. Results. Some two hundred spectral features from 15 molecules (and their isotopologues) were observed, including rotational lines in both the ground and vibrationally excited states (up to v = 5 for SiO). Detected species include the gaseous precursors of dust grains such as SiO, AlO, AlOH, TiO, and TiO2. We present a spectral atlas for both stars and the parameters of all detected spectral features. A clear dichotomy for the sulphur chemistry is seen: while CS, SiS, SO, and SO2 are abundantly present in IK Tau, only SO and SO2 are detected in R Dor. Also other species such as NaCl, NS, AlO, and AlOH display a completely different behaviour. From some selected species, the minor isotopologues can be used to assess the isotopic ratios. The channel maps of many species prove that both large and small-scale inhomogeneities persist in the inner wind of both stars in the form of blobs, arcs, and/or a disk. The high sensitivity of ALMA allows us to spot the impact of these correlated density structures in the spectral line profiles. The spectral lines often display a half width at zero intensity much larger than expected from the terminal velocity, v∞, previously derived for both objects (36 km s−1 versus v∞~ 17.7 km s−1 for IK Tau and 23 km s−1 versus v∞~ 5.5 km s−1 for R Dor). Both a more complex 3D morphology and a more forceful wind acceleration of the (underlying) isotropic wind can explain this trend. The formation of fractal grains in the region beyond ~400 mas can potentially account for the latter scenario. From the continuum map, we deduce a dust mass of ~3.7 × 10−7 M⊙ and ~2 × 10−8 M⊙ for IK Tau and R Dor, respectively. Conclusions. The observations presented here provide important constraints on the properties of these two oxygen-dominated AGB stellar winds. In particular, the ALMA data prove that both the dynamical and chemical properties are vastly different for this high mass-loss rate (IK Tau) and low mass-loss rate (R Dor) star.


Materials ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1260
Author(s):  
Tao Luo ◽  
Chi Zhang ◽  
Chaowei Sun ◽  
Xinchao Zheng ◽  
Yanjun Ji ◽  
...  

The reuse of rubber in concrete results in two major opposing effects: an enhancement in durability and a reduction in mechanical strength. In order to strengthen the mechanical properties of rubber concrete, steel fibers were added in this research. The compressive strength, the four-point bending strength, the mass loss rate, and the relative dynamic elastic modulus of steel fiber reinforced rubber concrete, subjected to cyclic freezing and thawing, were tested. The effects of the content of steel fibers on the freeze–thaw resistance are discussed. The microstructure damage was captured and analyzed by Industrial Computed Tomography (ICT) scanning. Results show that the addition of 2.0% steel fibers can increase the compressive strength of rubber concrete by 26.6% if there is no freeze–thaw effect, but the strengthening effect disappears when subjected to cyclic freeze–thaw. The enhancement of steel fibers on the four-point bending strength is effective under cyclic freeze–thaw. The effect of steel fibers is positive on the mass loss rate but negative on the relative dynamic elastic modulus.


2012 ◽  
Vol 446-449 ◽  
pp. 2595-2598 ◽  
Author(s):  
Yin Hua Ma ◽  
Jian Yi Gu

In this paper, the authors study the anti-freeze-thaw performance of a new type of semi-rigid base material named polypropylene fiber reinforced cement-stabilized aggregate, and freeze-thaw mass loss rate, freeze-thaw compressive strength, freeze-thaw splitting strength are used to evaluate the effect of polypropylene fiber on the anti-freeze-thaw performance, and the relationship of polypropylene fiber content, polypropylene fiber length with the anti-freeze-thaw performance are analyzed. The test after 10 freeze-thaw cycle shows that the mix of polypropylene fiber increase the freeze-thaw compressive strength and freeze-thaw splitting strength, and decrease the mass loss rate greatly. At the same time, the paper also determine the reasonable fiber content and fiber length, under this mix proportion, the mass loss rate reduce by 80%, the freeze-thaw compressive strength increase more than 12.1% and freeze-thaw splitting strength increase more than 13.4%. This research has laid an important foundation for the follow-up research and practice.


2011 ◽  
Vol 280 ◽  
pp. 152-158 ◽  
Author(s):  
Wen Ge Chai ◽  
Wen Li Li ◽  
Wen Xia Gao

In order to study high performance recycled concrete, the recycled concrete is prepared through the double admixing technology, i.e. mixing of high-quality mineral admixture and high-efficient water reducer. It is modified with the recycled aggregates soaked in and intensified by chemical grouts. The mass loss rate and relative dynamic elastic modulus of the recycled concrete are measured through fast freeze-thaw test, and a model for predicting the life of the recycled concrete under freeze-thaw conditions is built. The experiment results show that it is an efficient way to intensify recycled aggregates through being soaked in chemical grouts. The recycled concrete prepared with recycled aggregates intensified by chemical grouts, high-quality mineral admixture and the high-efficient water reducer feature favorable frost-resistance.


Sign in / Sign up

Export Citation Format

Share Document