scholarly journals Deep Eutectic Solvents as Catalysts for Upgrading Biomass

Catalysts ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 178
Author(s):  
Payam Kalhor ◽  
Khashayar Ghandi

Deep eutectic solvents (DESs) have emerged as promising green solvents, due to their versatility and properties such as high biodegradability, inexpensiveness, ease of preparation and negligible vapor pressure. Thus, DESs have been used as sustainable media and green catalysts in many chemical processes. On the other hand, lignocellulosic biomass as an abundant source of renewable carbon has received ample interest for the production of biobased chemicals. In this review, the state of the art of the catalytic use of DESs in upgrading the biomass-related substances towards biofuels and value-added chemicals is presented, and the gap in the knowledge is indicated to direct the future research.

2019 ◽  
Author(s):  
◽  
Nakara Bhawawet

[ACCESS RESTRICTED TO THE UNIVERSITY OF MISSOURI AT REQUEST OF AUTHOR.] Over the past decades, the Green Chemistry and Sustainability concept has aroused researchers to denounce their traditional ways of thinking regarding chemical processes to address the challenges relevant to global environmental concerns. The concept has demonstrated how fundamental scientific methodologies can protect human health and the environment in an economically beneficial manner. In academia and industry, the use of green solvents, such as water, supercritical fluids, ionic liquids (ILs) and deep eutectic solvents (DESs), has then become desirable in chemical processes. In the field of green nanochemistry, ILs and DESs have acquired courtesy as sustainable media for nanomaterials synthesis. There have been attempts to employ such eco-friendly fluids to synthesize, and additionally, control size and shapes of nanomaterials, where the field has been gaining intense interests as the morphology dictates the properties and functionalities of such nanomaterials. This dissertation reports strategies for metal colloidal nanocrystal synthesis in sustainable media and aims to build a foundation for understanding how to tailor eco-friendly IL and DES fluids to control the growth of metal nanocrystals. Chapter 1 explores research reporting strategies used for metal colloid synthesis in ILs and DESs. In Chapter 2, we have developed a strategy to replace a common organic solvent with an IL to prepare monodisperse gold nanoparticles (AuNPs) by a very fast microwave method. The pyrrolidinium IL used in the work demonstrates its capability to be efficiently recovered and reused for carrying out nanoscale synthesis iteratively. The work highlights the incompatibility of imidazolium ILs for the select nanoscale synthetic strategy. For Chapter 3, we have demonstrated a control over nanoparticle size and shape generated at an aqueous-organic interface. We have shown that an interfacial photoreduction leads to the production of spherical and wire-like nanostructures, respectively, when the IL employed involves a coordinated and non-coordinated IL anion, respectively. Next, Chapter 4 has focused on exploitation of a purposefully designed IL-inspired surfactant, acting dually as a reducing and stabilizing agent, for facile and controllable AuNP formation. The reported synthetic method is simple and rapid, using only a gold precursor and the surfactant. Coinage AuNPs can be obtained very fast, while predominantly triangular-shaped AuNPs can also be achieved by tuning parameters, such as the ratio of surfactant to the gold precursor, temperature, implementing a time delay before heating, and an addition of a directing agent. Finally, Chapter 5 outlines zwitterionic deep eutectic solvents (ZDESs) as novel media for metal nanocrystal synthesis, to expand portfolio of available DESs as the field is relatively new compared to that of IL.


Author(s):  
Ozgur Ekincioglu ◽  
M. Hulusi Ozkul ◽  
Silvia Patachia

The usage of polymers in different sectors has been increasing in recent decades, and even our current age may have been defined as polymer age. When concrete is considered polymers are also widely used to modify the properties of both mortar and concrete and the usage of polymers in concrete dates back to 1920’s. On the other hand, Macro-defect free (MDF) cements are one particular type of cement-polymer composites and developed and patented by scientists at Imperial College at the beginnings of 1980’s. MDF cements are produced by mixing cement (commonly calcium aluminate cement) with small amounts of polymer (usually polyvinyl alcohol acetate) and water. High shear, relatively low pressure (about 5 MPa) and moderate temperature (about 80-100 °C) are applied during the production of this material. MDF cements, although consist of more than 80% by weight of cement, show 20-30 times higher flexural strength comparing to ordinary Portland cements. However, MDF cements show a considerable reduction in strength when they are exposed to water even for a short time. Many studies have been conducted to solve the water sensitivity of MDF cements for over 30 years. In this study, production, basic properties and the current state of the art of MDF cements are explained, and the future research works are suggested.


2021 ◽  
Vol 12 ◽  
Author(s):  
Xiaoyan Yin ◽  
Linshan Wei ◽  
Xueyuan Pan ◽  
Chao Liu ◽  
Jianchun Jiang ◽  
...  

Converting agriculture and forestry lignocellulosic residues into high value-added liquid fuels (ethanol, butanol, etc.), chemicals (levulinic acid, furfural, etc.), and materials (aerogel, bioresin, etc.) via a bio-refinery process is an important way to utilize biomass energy resources. However, because of the dense and complex supermolecular structure of lignocelluloses, it is difficult for enzymes and chemical reagents to efficiently depolymerize lignocelluloses. Strikingly, the compact structure of lignocelluloses could be effectively decomposed with a proper pretreatment technology, followed by efficient separation of cellulose, hemicellulose and lignin, which improves the conversion and utilization efficiency of lignocelluloses. Based on a review of traditional pretreatment methods, this study focuses on the discussion of pretreatment process with recyclable and non-toxic/low-toxic green solvents, such as polar aprotic solvents, ionic liquids, and deep eutectic solvents, and provides an outlook of the industrial application prospects of solvent pretreatment.


Crystals ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 800 ◽  
Author(s):  
Michal Jablonský ◽  
Jozef Šima

In recent years, a plethora of extraction processes have been performed by a novel class of green solvents known as deep eutectic solvents (DESs), possessing several environmental, operational, and economic advantages proven by experience when compared to organic solvents and ionic liquids. The present review provides an organized overview of the use of DESs as extraction agents for the recovery of valuable substances and compounds from the original plant biomass, waste from its processing, and waste from the production and consumption of plant-based food. For the sake of simplicity and speed of orientation, the data are, as far as possible, arranged in a table in alphabetical order of the extracted substances. However, in some cases, the isolation of several substances is described in one paper and they are, therefore, listed together. The table further contains a description of the extracted phytomass, DES composition, extraction conditions, and literature sources. With regard to extracted value-added substances, this review addresses their pharmacological, therapeutic, and nutritional aspects. The review also includes an evaluation of the possibilities and limitations of using DESs to obtain value-added substances from phytomass.


2021 ◽  
Vol 2021 ◽  
pp. 1-11
Author(s):  
Vanita Jain ◽  
Qiming Wu ◽  
Shivam Grover ◽  
Kshitij Sidana ◽  
Gopal Chaudhary ◽  
...  

In this paper, we present a method for generating bird’s eye video from egocentric RGB videos. Working with egocentric views is tricky since such the view is highly warped and prone to occlusions. On the other hand, a bird’s eye view has a consistent scaling in at least the two dimensions it shows. Moreover, most of the state-of-the-art systems for tasks such as path prediction are built for bird’s eye views of the subjects. We present a deep learning-based approach that transfers the egocentric RGB images captured from a dashcam of a car to bird’s eye view. This is a task of view translation, and we perform two experiments. The first one uses an image-to-image translation method, and the other uses a video-to-video translation. We compare the results of our work with homographic transformation, and our SSIM values are better by a margin of 77% and 14.4%, and the RMSE errors are lower by 40% and 14.6% for image-to-image translation and video-to-video translation, respectively. We also visually show the efficacy and limitations of each method with helpful insights for future research. Compared to previous works that use homography and LIDAR for 3D point clouds, our work is more generalizable and does not require any expensive equipment.


2020 ◽  
Vol 6 (1) ◽  
pp. 1-19
Author(s):  
William Nuckols ◽  
Kim E. Bullington ◽  
Dennis E. Gregory

This qualitative study explores the perceptions of value added to the lives of graduates who borrowed money to fund their college educations. Through the lens of cognitive dissonance theory, five themes emerged. Overall, the study participants agreed that the ability to take on student loans to fund their education was worth it, but on the other hand feel overburdened with the cost of paying back their loans.  This paper also provides a foundation for future research and identifies public policy shortcomings and suggests solutions.  


1995 ◽  
Vol 10 (4) ◽  
pp. 345-360 ◽  
Author(s):  
Frank van Harmelen ◽  
Dieter Fensel

AbstractThis paper presents a general discussion of the role of formal methods in knowledge engineering. We give an historical account of the development of the field of knowledge engineering towards the use of formal methods. Subsequently, we discuss the pros and cons of formal methods. We do this by summarising the proclaimed advantages, and by arguing against some of the commonly heard objections against formal methods. We briefly summarise the current state of the art and discuss the most important directions that future research in this field should take. This paper presents a general setting for the other contributions in this issue of the journal, which each deal with a specific issue in more detail.


Author(s):  
Muhammad Yousaf ◽  
Petr Bris

A systematic literature review (SLR) from 1991 to 2019 is carried out about EFQM (European Foundation for Quality Management) excellence model in this paper. The aim of the paper is to present state of the art in quantitative research on the EFQM excellence model that will guide future research lines in this field. The articles were searched with the help of six strings and these six strings were executed in three popular databases i.e. Scopus, Web of Science, and Science Direct. Around 584 peer-reviewed articles examined, which are directly linked with the subject of quantitative research on the EFQM excellence model. About 108 papers were chosen finally, then the purpose, data collection, conclusion, contributions, and type of quantitative of the selected papers are discussed and analyzed briefly in this study. Thus, this study identifies the focus areas of the researchers and knowledge gaps in empirical quantitative literature on the EFQM excellence model. This article also presents the lines of future research.


2006 ◽  
Vol 56 (1) ◽  
pp. 1-43
Author(s):  
Sándor Richter

The order and modalities of cross-member state redistribution as well as the net financial position of the member states are one of the most widely discussed aspects of European integration. The paper addresses selected issues in the current debate on the EU budget for the period 2007 to 2013 and introduces four scenarios. The first is identical to the European Commission's proposal; the second is based on reducing the budget to 1% of the EU's GNI, as proposed by the six net-payer countries, while maintaining the expenditure structure of the Commission's proposal. The next two scenarios represent radical reforms: one of them also features a '1% EU GNI'; however, the expenditures for providing 'EU-wide value-added' are left unchanged and it is envisaged that the requisite cuts will be made in the expenditures earmarked for cohesion. The other reform scenario is different from the former one in that the cohesion-related expenditures are left unchanged and the expenditures for providing 'EU-wide value-added' are reduced. After the comparison of the various scenarios, the allocation of transfers to the new member states in terms of the conditions prevailing in the different scenarios is analysed.


Sign in / Sign up

Export Citation Format

Share Document