scholarly journals Electrochemical Detection of a Local Anesthetic Dibucaine at Arrays of Liquid|Liquid MicroInterfaces

Chemosensors ◽  
2021 ◽  
Vol 9 (1) ◽  
pp. 15
Author(s):  
Eissa Mohamed Almbrok ◽  
Nor Azah Yusof ◽  
Jaafar Abdullah ◽  
Ruzniza Mohd Zawawi
Keyword(s):  
Cyclic Voltammetry ◽  
Detection Limit ◽  
Bovine Serum Albumin ◽  
Limit Of Detection ◽  
Differential Pulse ◽  
Gibbs Energy Of Transfer ◽  
Pulse Voltammetry ◽  
Energy Of Transfer ◽  
The Impact ◽  
Transfer Potential

Electrochemical characterization and detection of protonated dibucaine (DIC+) at microinterface array across water|1,6-dichlorohexane were performed using cyclic voltammetry (CV) and differential pulse voltammetry (DPV). Some thermodynamic parameters of dibucaine, such as the standard transfer potential, the Gibbs energy of transfer and the partition coefficient, were estimated by CV. In addition to the analytical parameters, the impact of bovine serum albumin (BSA) on dibucaine detection (in artificial serum matrices) was also investigated. DPV was applied to detect a lower concentration of DIC+, resulting in a detection limit of 0.9 ± 0.06 µM. While the presence of BSA affected CV, demonstrated as reduced current responses, DPV was confirmed to be an efficient method for lowering concentrations of the dibucaine detection in the artificial serum matrix in the presence of BSA, with a limit of detection (LOD) of 1.9 ± 0.12 µM.

scholarly journals A Screen-Printed Electrode Modified With Graphene/Co3O4 Nanocomposite for Electrochemical Detection of Tramadol

2020 ◽  
Vol 8 ◽  
Author(s):  
Mohammad Reza Aflatoonian ◽  
Somayeh Tajik ◽  
Behnaz Aflatoonian ◽  
Hadi Beitollahi ◽  
Kaiqiang Zhang ◽  
...  
Keyword(s):  
Cyclic Voltammetry ◽  
Detection Limit ◽  
Linear Sweep Voltammetry ◽  
Differential Pulse ◽  
Linear Sweep ◽  
Screen Printed Electrode ◽  
Pulse Voltammetry ◽  
Phosphate Buffered Saline ◽  
Urine Specimens ◽  
Screen Printed

In this paper, graphene (Gr)/Co3O4 nanocomposite was synthesized and utilized for the development of a novel electrochemical sensor to detect tramadol. Tramadol determination was examined by linear sweep voltammetry, differential pulse voltammetry, cyclic voltammetry, and chronoamperometry on Gr/Co3O4 nanocomposite-modified screen-printed electrode (Gr/Co3O4/SPE) in phosphate-buffered saline (PBS). Under the optimized condition, the detection limit of tramadol is 0.03 μM (S/N = 3) in the linear ranges of 0.1–500.0 μM. Furthermore, Gr/Co3O4/SPE was satisfactorily utilized to detect tramadol in tramadol tablet and urine specimens.

Gold Nanoparticle Based Electrochemical Immunosensor for Detection of T3 Hormone

2020 ◽  
Vol 20 (10) ◽  
pp. 6057-6062
Author(s):  
Rahul Saxena ◽  
H. Fouad ◽  
Sudha Srivastava
Keyword(s):  
Gold Nanoparticles ◽  
Cyclic Voltammetry ◽  
Electrode Surface ◽  
Dynamic Range ◽  
Limit Of Detection ◽  
Differential Pulse ◽  
Electrochemical Immunosensor ◽  
Antigen Concentration ◽  
Antigen Present ◽  
Pulse Voltammetry

We report a nanoparticles based electrochemical immunosensor to detect and quantify triiodothyronine (T3) hormone. Immunosensor developed using gold nanoparticles and anti-T3 antibody, was employed for quantification of T3 antigen using cyclic voltammetry (CV) and differential pulse voltammetry (DPV) technique. The electrochemical response of the developed immunosensor correlates well with the amount of antigen present in the sample. With increase in antigen concentration the immunocomplex formation on electrode surface increases and hence redox current decreases. The immunosensor shows a lower limit of detection of 1 pg/mL and dynamic range from 1 to 500 pg/mL. Sensitivity of the immunosensor was found to be 29.81 μA/pg/mL/cm2.

Electrochemical Determination of Inorganic Phosphate

2011 ◽  
Vol 339 ◽  
pp. 435-439 ◽  
Author(s):  
Wen Juan Zheng ◽  
Hai Tao Zheng ◽  
Yan Ling Li ◽  
Xing Sheng Wang ◽  
Shin Ichiro Suye
Keyword(s):  
Cyclic Voltammetry ◽  
Detection Limit ◽  
Electrode Surface ◽  
Inorganic Phosphate ◽  
Differential Pulse ◽  
Electrochemical Determination ◽  
Sensor Response ◽  
Pulse Voltammetry ◽  
Phosphate Sensor

An electrochemical phosphate sensor based on the precipitation of molybdophosphate on electrode surface was developed for the determination of inorganic phosphate. The condition for the formation of the molybdophosphate was studied and cyclic voltammetry and differential pulse voltammetry were utilized for the determination. A detection limit of 10 ppm was obtained and the sensor response was approximate liner in the range between 10-100 ppm.

scholarly journals Electrochemical Behavior and Detection of Diclofenac at a Microporous Si3N4 Membrane Modified Water–1,6-dichlorohexane Interface System

Chemosensors ◽  
2020 ◽  
Vol 8 (1) ◽  
pp. 11
Author(s):  
Eissa Mohamed Almbrok ◽  
Nor Azah Yusof ◽  
Jaafar Abdullah ◽  
Ruzniza Mohd Zawawi
Keyword(s):  
Silicon Nitride ◽  
Electrochemical Behavior ◽  
Limit Of Detection ◽  
Differential Pulse ◽  
Liquid Interface ◽  
Analgesic Treatment ◽  
Silicon Nitride Membrane ◽  
Thermodynamic Variables ◽  
Energy Of Transfer ◽  
Transfer Potential

The electrochemical behavior when the liquid–liquid interface was modified by commercially available, microporous silicon nitride membrane, was achieved using cyclic voltammetry with tetramethyl ammonium. The transfer characteristics of the ionizable drug diclofenac ( DCF − ), as an anti-inflammatory, anti-rheumatic, antipyretic, and analgesic treatment in common use in biomedical applications, were also investigated across microporous silicon nitride-modified liquid interface. Thus, some thermodynamic variables for DCF − , such as the standard Gibbs energy of transfer, the standard transfer potential and lipophilicity were estimated. Furthermore, the influence of possible interfering substances (ascorbic acid, sugar, amino acid, urea, and metal ions) on the detection of DCF − was investigated. An electrochemical DCF sensor is investigated using differential pulse voltammetry (DPV) as the quantification technique, a linear range of 8–56 µM and a limit of detection of 1.5 µM was possible due to the miniaturized interfaces formed within silicon nitride.

scholarly journals Praseodymium ferrite nano-particles based modified electrode and its application in determination of dopamine

2020 ◽  
Vol 10 (4) ◽  
pp. 5855-5859
Keyword(s):  
Electron Microscopy ◽  
Cyclic Voltammetry ◽  
Differential Pulse Voltammetry ◽  
Limit Of Detection ◽  
Phosphate Buffer Solution ◽  
Differential Pulse ◽  
Nano Particles ◽  
Ferric Nitrate ◽  
Buffer Solution ◽  
Pulse Voltammetry

The present works report the graphite based electrochemical sensor modified by nano-sized praseodymium ferrite (np-PrFeO3) materials for the detection of dopamine. The combustion technique was used to synthesize these nanomaterials of np-PrFeO3 using praseodymium oxide and ferric nitrate as precursor materials. The nanomaterials were characterized by field emission scanning electron microscopy and transmission electron microscopy techniques. The crystallite sizes of synthesized nanoparticles (nps) were in the range from 40-45 nm with cubic crystal system. Cyclic voltammetry and Differential pulse voltammetry techniques were used to study the electrochemical property and were observed to be superior to earlier reports. The limit of detection of dopamine at PrFeO3/GP electrode was 600 nM with 5 to 200 µM for linearity range. The phosphate buffer solution of pH 6.0 was used for all experimental work with maintaining the scan rate 100mVs-1 and 50mVs-1 for cyclic voltammetry and Differential pulse voltammetry, respectively.

Solar Exfoliated Graphene Oxide: A Platform for Electrochemical Sensing of Epinephrine

2020 ◽  
Vol 16 (4) ◽  
pp. 393-403 ◽  
Author(s):  
Renjini Sadhana ◽  
Pinky Abraham ◽  
Anithakumary Vidyadharan
Keyword(s):  
Cyclic Voltammetry ◽  
Graphene Oxide ◽  
Glassy Carbon Electrode ◽  
Glassy Carbon ◽  
Simultaneous Detection ◽  
Differential Pulse ◽  
Carbon Electrode ◽  
Modified Glassy Carbon Electrode ◽  
Reduced Graphene ◽  
Pulse Voltammetry

Introduction: In this study, solar exfoliated graphite oxide modified glassy carbon electrode was used for the anodic oxidation of epinephrine in a phosphate buffer medium at pH7. The modified electrode showed fast response and sensitivity towards Epinephrine Molecule (EP). The electrode was characterized electrochemically through Cyclic Voltammetry (CV) and Differential Pulse Voltammetry (DPV). Area of the electrode enhanced three times during modification and studies reveal that the oxidation process of EP occurs by an adsorption controlled process involving two electrons. The results showed a detection limit of 0.50 ± 0.01μM with a linear range up to 100 μM. The rate constant calculated for the electron transfer reaction is 1.35 s-1. The electrode was effective for simultaneous detection of EP in the presence of Ascorbic Acid (AA) and Uric Acid (UA) with well-resolved signals. The sensitivity, selectivity and stability of the sensor were also confirmed. Methods: Glassy carbon electrode modified by reduced graphene oxide was used for the detection and quantification of epinephrine using cyclic voltammetry and differential pulse voltammetry. Results: The results showed an enhancement in the electrocatalytic oxidation of epinephrine due to the increase in the effective surface area of the modified electrode. The anodic transfer coefficient, detection limit and electron transfer rate constant of the reaction were also calculated. Conclusion: The paper reports the determination of epinephrine using reduced graphene oxide modified glassy carbon electrode through CV and DPV. The sensor exhibited excellent reproducibility and repeatability for the detection of epinephrine and also its simultaneous detection of ascorbic acid and uric acid, which coexist in the biological system.

Polarographic and voltammetric determination of 6-mercaptopurine and 6-thioguanine

1986 ◽  
Vol 51 (11) ◽  
pp. 2466-2472 ◽  
Author(s):  
Jiří Barek ◽  
Antonín Berka ◽  
Ludmila Dempírová ◽  
Jiří Zima
Keyword(s):  
Detection Limit ◽  
Differential Pulse Voltammetry ◽  
Detection Limits ◽  
Differential Pulse ◽  
Voltammetric Determination ◽  
Differential Pulse Polarography ◽  
Hanging Mercury Drop Electrode ◽  
Pulse Polarography ◽  
Pulse Voltammetry

Conditions were found for the determination of 6-mercaptopurine (I) and 6-thioguanine (II) by TAST polarography, differential pulse polarography and fast-scan differential pulse voltammetry at a hanging mercury drop electrode. The detection limits were 10-6, 8 . 10-8, and 6 . 10-8 mol l-1, respectively. A further lowering of the detection limit to 2 . 10-8 mol l-1 was attained by preliminary accumulation of the determined substances at the surface of a hanging mercury drop.

scholarly journals An efficient electrochemical sensing of hazardous catechol and hydroquinone at direct green 6 decorated carbon paste electrode

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
K. Chetankumar ◽  
B. E. Kumara Swamy ◽  
S. C. Sharma ◽  
S. A. Hariprasad
Keyword(s):  
Carbon Paste Electrode ◽  
Limit Of Detection ◽  
Tap Water ◽  
Differential Pulse ◽  
Electrochemical Sensing ◽  
Carbon Paste ◽  
Pulse Voltammetry ◽  
Two Peaks ◽  
Paste Electrode ◽  
Scanning Electron

AbstractIn this proposed work, direct green 6 (DG6) decorated carbon paste electrode (CPE) was fabricated for the efficient simultaneous and individual sensing of catechol (CA) and hydroquinone (HY). Electrochemical deeds of the CA and HY were carried out by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) at poly-DG6-modfied carbon paste electrode (Po-DG6-MCPE). Using scanning electron microscopy (SEM) studied the surface property of unmodified CPE (UCPE) and Po-DG6-MCPE. The decorated sensor displayed admirable electrocatalytic performance with fine stability, reproducibility, selectivity, low limit of detection (LLOD) for HY (0.11 μM) and CC (0.09 μM) and sensor process was originated to be adsorption-controlled phenomena. The Po-DG6-MCPE sensor exhibits well separated two peaks for HY and CA in CV and DPV analysis with potential difference of 0.098 V. Subsequently, the sensor was practically applied for the analysis in tap water and it consistent in-between for CA 93.25–100.16% and for HY 97.25–99.87% respectively.

scholarly journals Supramolecular assemblies of carbon nanocoils and tetraphenylporphyrin derivatives for sensing of catechol and hydroquinone in aqueous solution

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Syeda Aqsa Batool Bukhari ◽  
Habib Nasir ◽  
Lujun Pan ◽  
Mehroz Tasawar ◽  
Manzar Sohail ◽  
...  
Keyword(s):  
Electrochemical Impedance ◽  
Limit Of Detection ◽  
Linear Trend ◽  
Differential Pulse ◽  
Peak Potential ◽  
Limit Of Quantification ◽  
Efficient Detection ◽  
Good Repeatability ◽  
Ft Ir ◽  
Pulse Voltammetry

AbstractNon-enzymatic electrochemical detection of catechol (CC) and hydroquinone (HQ), the xenobiotic pollutants, was carried out at the surface of novel carbon nanocoils/zinc-tetraphenylporphyrin (CNCs/Zn-TPP) nanocomposite supported on glassy carbon electrode. The synergistic effect of chemoresponsive activity of Zn-TPP and a large surface area and electron transfer ability of CNCs lead to efficient detection of CC and HQ. The nanocomposite was characterized by using FT-IR, UV/vis. spectrophotometer, SEM and energy dispersive X-ray spectroscopy (EDS). Cyclic voltammetry, differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy were used for the electrochemical studies. CNCs/Zn-TPP/GCE nanosensor displayed a limit of detection (LOD), limit of quantification (LOQ) and sensitivity for catechol as 0.9 µM, 3.1 µM and 0.48 µA µM−1 cm−2, respectively in a concentration range of 25–1500 µM. Similarly, a linear trend in the concentration of hydroquinone detection was observed between 25 and 1500 µM with an LOD, LOQ and sensitivity of 1.5 µM, 5.1 µM and 0.35 µA µM−1 cm−2, respectively. DPV of binary mixture pictured well resolved peaks with anodic peak potential difference, ∆Epa(CC-HQ), of 110 mV showing efficient sensing of CC and HQ. The developed nanosensor exhibits stability for up to 30 days, better selectivity and good repeatability for eight measurements (4.5% for CC and 5.4% for HQ).

scholarly journals An Electrochemical Sensor Based On Graphite Electrode Modified With Silica Containing 1-N-Propyl-3-Methylimidazolium Species For Determination Of Ascorbic Acid

2019 ◽  
Vol Vol. 14, No.1 ◽  
pp. 5-14 ◽  
Author(s):  
Anastasiya Tkachenko ◽  
Mykyta Onizhuk ◽  
Oleg Tkachenko ◽  
Leliz T. Arenas ◽  
Edilson V. Benvenutt ◽  
...  
Keyword(s):  
Ascorbic Acid ◽  
Cyclic Voltammetry ◽  
Electrochemical Sensor ◽  
Electrochemical Impedance ◽  
Limit Of Detection ◽  
Pharmaceutical Formulations ◽  
Differential Pulse ◽  
Long Term Stability ◽  
Diffusion Limited

In the present study, an electrochemical sensor based on the electrode (SiMImCl/C) consisting of graphite and silica, grafted with 1-n-propyl-3-methylimidazolium chloride was used for ascorbic acid (AA) quantification in pharmaceuticals and food formulations. Cyclic voltammetry and electrochemical impedance spectroscopy were applied for electrochemical characterization of the SiMImCl/C electrode. The cyclic voltammetry study revealed that the oxidation of AA on this electrode is an irreversible process, realized by adsorption and diffusion limited step. The differential pulse voltammetry was applied to develop a procedure for the AA determination. The linear range was found to be 0.3–170 μmol L-1 and the limit of detection – 0.1 μmol L-1. The proposed SiMImCl/C electrode has long term stability and does not show electrochemical activity towards the analytes, which commonly coexist with AA. The sensor was successfully used for quantification of AA in food and pharmaceutical formulations.

Sign in / Sign up

Export Citation Format

Share Document