scholarly journals Supramolecular assemblies of carbon nanocoils and tetraphenylporphyrin derivatives for sensing of catechol and hydroquinone in aqueous solution

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Syeda Aqsa Batool Bukhari ◽  
Habib Nasir ◽  
Lujun Pan ◽  
Mehroz Tasawar ◽  
Manzar Sohail ◽  
...  
Keyword(s):  
Electrochemical Impedance ◽  
Limit Of Detection ◽  
Linear Trend ◽  
Differential Pulse ◽  
Peak Potential ◽  
Limit Of Quantification ◽  
Efficient Detection ◽  
Good Repeatability ◽  
Ft Ir ◽  
Pulse Voltammetry

AbstractNon-enzymatic electrochemical detection of catechol (CC) and hydroquinone (HQ), the xenobiotic pollutants, was carried out at the surface of novel carbon nanocoils/zinc-tetraphenylporphyrin (CNCs/Zn-TPP) nanocomposite supported on glassy carbon electrode. The synergistic effect of chemoresponsive activity of Zn-TPP and a large surface area and electron transfer ability of CNCs lead to efficient detection of CC and HQ. The nanocomposite was characterized by using FT-IR, UV/vis. spectrophotometer, SEM and energy dispersive X-ray spectroscopy (EDS). Cyclic voltammetry, differential pulse voltammetry (DPV) and electrochemical impedance spectroscopy were used for the electrochemical studies. CNCs/Zn-TPP/GCE nanosensor displayed a limit of detection (LOD), limit of quantification (LOQ) and sensitivity for catechol as 0.9 µM, 3.1 µM and 0.48 µA µM−1 cm−2, respectively in a concentration range of 25–1500 µM. Similarly, a linear trend in the concentration of hydroquinone detection was observed between 25 and 1500 µM with an LOD, LOQ and sensitivity of 1.5 µM, 5.1 µM and 0.35 µA µM−1 cm−2, respectively. DPV of binary mixture pictured well resolved peaks with anodic peak potential difference, ∆Epa(CC-HQ), of 110 mV showing efficient sensing of CC and HQ. The developed nanosensor exhibits stability for up to 30 days, better selectivity and good repeatability for eight measurements (4.5% for CC and 5.4% for HQ).

scholarly journals Penentuan Hidrokuinon dalam Sampel Krim Pemutih Wajah secara Voltammetri Menggunakan Screen Printed Carbon Electrode (SPCE)

2015 ◽  
pp. 97-102
Author(s):  
Ani Mulyasuryani ◽  
Alfita Savitri
Keyword(s):  
Limit Of Detection ◽  
Differential Pulse ◽  
Electrode System ◽  
Carbon Electrode ◽  
Peak Potential ◽  
Screen Printed Carbon Electrode ◽  
The Face ◽  
High Pulse ◽  
Pulse Voltammetry ◽  
Screen Printed

Hydroquinone in whitening face cream has been banned since 2008, but is still found facial bleaching creams containing hydroquinone. Therefore, in this study have been developed voltammetric method for the determination hydroquinone in face whitening cream. This study has been carried out optimization of pH and measurement conditions. Optimizationof pH has been done in cyclic voltammetry, while the optimization of measurement carried out by differential pulse voltammetry. In this study, using a screen printed carbon electrode with a three electrode system. The results showed that the increase in pH causes a decrease in the anodic peak potential (Epa) of hydroquinone. The optimum conditions resulted at pH 2 in which the anodic current (Ipa) is the highest. The optimum condition resulted at high pulse 200 mV and scan rate at 15 mV/sec. The linear regression concentration is 1-100 μM, limit of detection is 0.015 μM and sensitivity is 0.0652 μM/µA. The results showed that the concentration of hydroquinone in the face whitening cream samples ranged from 0 to 0.02%DOI :http://dx.doi.org/10.15408/jkv.v0i0.3145.

scholarly journals Simple and Cost-Effective Electrochemical Method for Norepinephrine Determination Based on Carbon Dots and Tyrosinase

Sensors ◽  
2020 ◽  
Vol 20 (16) ◽  
pp. 4567 ◽  
Author(s):  
Sylwia Baluta ◽  
Anna Lesiak ◽  
Joanna Cabaj
Keyword(s):  
Electrochemical Method ◽  
Gold Electrode ◽  
High Selectivity ◽  
Limit Of Detection ◽  
Cost Effective ◽  
Differential Pulse ◽  
Modern Medicine ◽  
Limit Of Quantification ◽  
Voltammetric Techniques ◽  
Pulse Voltammetry

Although neurotransmitters are present in human serum at the nM level, any dysfunction of the catecholamines concentration may lead to numerous serious health problems. Due to this fact, rapid and sensitive catecholamines detection is extremely important in modern medicine. However, there is no device that would measure the concentration of these compounds in body fluids. The main goal of the present study is to design a simple as possible, cost-effective new biosensor-based system for the detection of neurotransmitters, using nontoxic reagents. The miniature Au-E biosensor was designed and constructed through the immobilization of tyrosinase on an electroactive layer of cysteamine and carbon nanoparticles covering the gold electrode. This sensing arrangement utilized the catalytic oxidation of norepinephrine (NE) to NE quinone, measured with voltammetric techniques: cyclic voltammetry and differential pulse voltammetry. The prepared bio-system exhibited good parameters: a broad linear range (1–200 μM), limit of detection equal to 196 nM, limit of quantification equal to 312 nM, and high selectivity and sensitivity. It is noteworthy that described method was successfully applied for NE determination in real samples.

scholarly journals Application of a Conducting Poly-Methionine/Gold Nanoparticles-Modified Sensor for the Electrochemical Detection of Paroxetine

Polymers ◽  
2021 ◽  
Vol 13 (22) ◽  
pp. 3981
Author(s):  
Saedah R. Al-Mhyawi ◽  
Riham K. Ahmed ◽  
Rasha M. El Nashar
Keyword(s):  
Electrochemical Impedance ◽  
Limit Of Detection ◽  
Electrochemical Techniques ◽  
Pharmaceutical Formulations ◽  
Differential Pulse ◽  
Force Microscopy ◽  
Atomic Force ◽  
Response Range ◽  
Pulse Voltammetry ◽  
Modified Sensor

This work demonstrates a facile electropolymerization of a dl-methionine (dl-met) conducting polymeric film on a gold nanoparticle (AuNPs)-modified glassy carbon electrode (GCE). The resulting sensor was successfully applied for the sensitive detection of paroxetine·HCl (PRX), a selective serotonin (5-HT) reuptake inhibitor (SSRIs), in its pharmaceutical formulations. The sensor was characterized morphologically using scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDX) and atomic force microscopy (AFM) and electrochemical techniques such as differential pulse voltammetry (DPV), electrochemical impedance spectroscopy (EIS) and cyclic voltammetry (CV). The proposed sensor, poly (dl-met)/AuNPs-GCE, exhibited a linear response range from 5 × 10−11 to 5 × 10−8 M and from 5 × 10−8 to 1 × 10−4 M using DPV with lowest limit of detection (LOD = 1 × 10−11 M) based on (S/N = 3). The poly (dl-met)/AuNPs-GCE sensor was successfully applied for PRX determination in three different pharmaceutical formulations with percent recoveries between 96.29% and 103.40% ± SD (±0.02 and ±0.58, respectively).

scholarly journals An efficient electrochemical sensing of hazardous catechol and hydroquinone at direct green 6 decorated carbon paste electrode

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
K. Chetankumar ◽  
B. E. Kumara Swamy ◽  
S. C. Sharma ◽  
S. A. Hariprasad
Keyword(s):  
Carbon Paste Electrode ◽  
Limit Of Detection ◽  
Tap Water ◽  
Differential Pulse ◽  
Electrochemical Sensing ◽  
Carbon Paste ◽  
Pulse Voltammetry ◽  
Two Peaks ◽  
Paste Electrode ◽  
Scanning Electron

AbstractIn this proposed work, direct green 6 (DG6) decorated carbon paste electrode (CPE) was fabricated for the efficient simultaneous and individual sensing of catechol (CA) and hydroquinone (HY). Electrochemical deeds of the CA and HY were carried out by cyclic voltammetry (CV) and differential pulse voltammetry (DPV) at poly-DG6-modfied carbon paste electrode (Po-DG6-MCPE). Using scanning electron microscopy (SEM) studied the surface property of unmodified CPE (UCPE) and Po-DG6-MCPE. The decorated sensor displayed admirable electrocatalytic performance with fine stability, reproducibility, selectivity, low limit of detection (LLOD) for HY (0.11 μM) and CC (0.09 μM) and sensor process was originated to be adsorption-controlled phenomena. The Po-DG6-MCPE sensor exhibits well separated two peaks for HY and CA in CV and DPV analysis with potential difference of 0.098 V. Subsequently, the sensor was practically applied for the analysis in tap water and it consistent in-between for CA 93.25–100.16% and for HY 97.25–99.87% respectively.

scholarly journals Electrochemical Investigation of Curcumin–DNA Interaction by Using Hydroxyapatite Nanoparticles–Ionic Liquids Based Composite Electrodes

Materials ◽  
2021 ◽  
Vol 14 (15) ◽  
pp. 4344
Author(s):  
Merve Uca ◽  
Ece Eksin ◽  
Yasemin Erac ◽  
Arzum Erdem
Keyword(s):  
Electrochemical Impedance ◽  
Differential Pulse ◽  
Dna Interaction ◽  
Composite Electrodes ◽  
Hydroxyapatite Nanoparticles ◽  
Graphite Electrodes ◽  
X Ray ◽  
Pulse Voltammetry ◽  
Polymerase Chain

Hydroxyapatite nanoparticles (HaP) and ionic liquid (IL) modified pencil graphite electrodes (PGEs) are newly developed in this assay. Electrochemical impedance spectroscopy (EIS), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and cyclic voltammetry (CV) were applied to examine the microscopic and electrochemical characterization of HaP and IL-modified biosensors. The interaction of curcumin with nucleic acids and polymerase chain reaction (PCR) samples was investigated by measuring the changes at the oxidation signals of both curcumin and guanine by differential pulse voltammetry (DPV) technique. The optimization of curcumin concentration, DNA concentration, and the interaction time was performed. The interaction of curcumin with PCR samples was also investigated by gel electrophoresis.

scholarly journals A highly sensitive octopus-like azobenzene fluorescent probe for determination of abamectin B1 in apples

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Zhenlong Guo ◽  
YiFei Su ◽  
Kexin Li ◽  
MengYi Tang ◽  
Qiang Li ◽  
...  
Keyword(s):  
Fluorescent Probe ◽  
Limit Of Detection ◽  
Quantitative Detection ◽  
Fluorescence Signal ◽  
Ionization Mass ◽  
Limit Of Quantification ◽  
Visible Absorption ◽  
Esi Ms ◽  
Relative Standard ◽  
Ft Ir

AbstractThe development of detecting residual level of abamectin B1 in apples is of great importance to public health. Herein, we synthesized a octopus-like azobenzene fluorescent probe 1,3,5-tris (5′-[(E)-(p-phenoxyazo) diazenyl)] benzene-1,3-dicarboxylic acid) benzene (TPB) for preliminary detection of abamectin B1 in apples. The TPB molecule has been characterized by ultraviolet–visible absorption spectrometry, 1H-nuclear magnetic resonance, fourier-transform infrared (FT-IR), electrospray ionization mass spectroscopy (ESI-MS) and fluorescent spectra. A proper determination condition was optimized, with limit of detection and limit of quantification of 1.3 µg L−1 and 4.4 μg L−1, respectively. The mechanism of this probe to identify abamectin B1 was illustrated in terms of undergoing aromatic nucleophilic substitution, by comparing fluorescence changes, FT-IR and ESI-MS. Furthermore, a facile quantitative detection of the residual abamectin B1 in apples was achieved. Good reproducibility was present based on relative standard deviation of 2.2%. Six carboxyl recognition sites, three azo groups and unique fluorescence signal towards abamectin B1 of this fluorescent probe demonstrated reasonable sensitivity, specificity and selectivity. The results indicate that the octopus-like azobenzene fluorescent probe can be expected to be reliable for evaluating abamectin B1 in agricultural foods.

scholarly journals Surface-Enhanced Oxidation and Determination of Isothipendyl Hydrochloride at an Electrochemical Sensing Film Constructed by Multiwalled Carbon Nanotubes

2012 ◽  
Vol 2012 ◽  
pp. 1-6
Author(s):  
S. N. Prashanth ◽  
Shankara S. Kalanur ◽  
Nagappa L. Teradal ◽  
J. Seetharamappa
Keyword(s):  
Limit Of Detection ◽  
Biological Fluids ◽  
Differential Pulse ◽  
Electrochemical Sensing ◽  
Good Precision ◽  
Multiwalled Carbon ◽  
Limit Of Quantification ◽  
Surface Enhanced ◽  
Ph Range

The electrochemical behavior of isothipendyl hydrochloride (IPH) was investigated at bare and multiwalled-carbon-nanotube modified glassy carbon electrode (MWCNT-GCE). IPH (55 μM) showed two oxidation peaks in Britton-Robinson (BR) buffer of pH 7.0. The oxidation process of IPH was observed to be irreversible over the pH range of 2.5–9.0. The influence of pH, scan rate, and concentration of the drug on anodic peak was studied. A differential pulse voltammetric method with good precision and accuracy was developed for the determination of IPH in pure and biological fluids. The peak current was found to be linearly dependent on the concentration of IPH in the range of 1.25–55 μM. The values of limit of detection and limit of quantification were noticed to be 0.284 and 0.949 μM, respectively.

scholarly journals An Electrochemical Sensor Based On Graphite Electrode Modified With Silica Containing 1-N-Propyl-3-Methylimidazolium Species For Determination Of Ascorbic Acid

2019 ◽  
Vol Vol. 14, No.1 ◽  
pp. 5-14 ◽  
Author(s):  
Anastasiya Tkachenko ◽  
Mykyta Onizhuk ◽  
Oleg Tkachenko ◽  
Leliz T. Arenas ◽  
Edilson V. Benvenutt ◽  
...  
Keyword(s):  
Ascorbic Acid ◽  
Cyclic Voltammetry ◽  
Electrochemical Sensor ◽  
Electrochemical Impedance ◽  
Limit Of Detection ◽  
Pharmaceutical Formulations ◽  
Differential Pulse ◽  
Long Term Stability ◽  
Diffusion Limited

In the present study, an electrochemical sensor based on the electrode (SiMImCl/C) consisting of graphite and silica, grafted with 1-n-propyl-3-methylimidazolium chloride was used for ascorbic acid (AA) quantification in pharmaceuticals and food formulations. Cyclic voltammetry and electrochemical impedance spectroscopy were applied for electrochemical characterization of the SiMImCl/C electrode. The cyclic voltammetry study revealed that the oxidation of AA on this electrode is an irreversible process, realized by adsorption and diffusion limited step. The differential pulse voltammetry was applied to develop a procedure for the AA determination. The linear range was found to be 0.3–170 μmol L-1 and the limit of detection – 0.1 μmol L-1. The proposed SiMImCl/C electrode has long term stability and does not show electrochemical activity towards the analytes, which commonly coexist with AA. The sensor was successfully used for quantification of AA in food and pharmaceutical formulations.

scholarly journals Adsorption of Guanine, Guanosine, and Adenine at Electrodes Studied by Differential Pulse Voltammetry and Electrochemical Impedance

Langmuir ◽  
2002 ◽  
Vol 18 (6) ◽  
pp. 2326-2330 ◽  
Author(s):  
Ana Maria Oliveira-Brett ◽  
Luís Antônio da Silva ◽  
Christopher M. A. Brett
Keyword(s):  
Differential Pulse Voltammetry ◽  
Electrochemical Impedance ◽  
Differential Pulse ◽  
Pulse Voltammetry

Electrochemical Detection of Fenthion Insecticide in Olive Oils by a Sensitive Non-Enzymatic Biomimetic Sensor Enhanced with Metal Nanoparticles

2021 ◽  
Vol 5 (1) ◽  
pp. 64
Author(s):  
Youssra Aghoutane ◽  
Nezha El Bari ◽  
Zoubida Laghrari ◽  
Benachir Bouchikhi
Keyword(s):  
Electrochemical Impedance ◽  
Differential Pulse ◽  
Organophosphate Insecticide ◽  
Imprinted Polymer ◽  
High Recovery ◽  
Molecularly Imprinted ◽  
Olive Oils ◽  
Pulse Voltammetry ◽  
Biomimetic Sensor

Fenthion, an organophosphate insecticide, is a cholinesterase inhibitor and is highly toxic. An electrochemical sensor based on molecularly imprinted polymer is developed here for its detection. For this purpose, 2-aminothiophenol mixed with gold nanoparticles was immobilized on screen-printed gold electrodes. The FEN pattern was then fixed before being covered with 2-aminothiophenol. Cyclic voltammetry, differential pulse voltammetry and electrochemical impedance spectroscopy methods were used for the electrochemical characterization. The low detection limit was 0.05 mg/Kg over a range of 0.01–17.3 µg/mL. The sensor was successfully applied for the determination of FEN in olive oil samples with high recovery values.

Sign in / Sign up

Export Citation Format

Share Document