scholarly journals Meyer-Rod Coated 2D Single-Crystalline Copper Nanoplate Film with Intensive Pulsed Light for Flexible Electrode

Coatings ◽  
2020 ◽  
Vol 10 (1) ◽  
pp. 88
Author(s):  
Myeongjong Go ◽  
Asrar Alam ◽  
Ho Kwang Choie ◽  
Zhaoyang Zhong ◽  
Keun Hyung Lee ◽  
...  
Keyword(s):  
Systematic Study ◽  
Large Scale ◽  
Coating Process ◽  
Pulsed Light ◽  
Large Area ◽  
Flexible Electrode ◽  
Conductive Coatings ◽  
Single Crystalline ◽  
Rheological Behaviors ◽  
Industrial Coating

Copper is widely used because it is inexpensive, abundant, and highly conductive. However, most copper used in industrial coating processes is in the form of circular powder, which is problematic for large area, high conductive coatings. In this work, 2D single-crystalline Cu nanoplates (Cu NPLs) were synthesized and a systematic study on coating with large-scale Cu NPLs using a Meyer-rod coating process was performed. The rheological behaviors of the Cu solution with various concentrations, surface tensions, and speeds were analyzed using Ca and Re numbers to optimize coating conditions. In addition, the effect of intensive pulse light (IPL) to sinter the coper film within a 1 s timeframe was also investigated in order to be able to produce an electrode in the shortest possible time which is applicable to industry. Finally, the Meyer-rod coated electrode was utilized in an electrochemical luminescence (ECL) device.

Seeded 2D epitaxy of large-area single-crystal films of the van der Waals semiconductor 2H MoTe2

Science ◽  
2021 ◽  
Vol 372 (6538) ◽  
pp. 195-200
Author(s):  
Xiaolong Xu ◽  
Yu Pan ◽  
Shuai Liu ◽  
Bo Han ◽  
Pingfan Gu ◽  
...  
Keyword(s):  
Large Scale ◽  
Van Der Waals ◽  
Electrical Performance ◽  
Large Area ◽  
Single Crystalline ◽  
Crystalline Film ◽  
Single Crystal Films ◽  
Crystal Films ◽  
Crystalline Films ◽  
Single Crystalline Film

The integration of two-dimensional (2D) van der Waals semiconductors into silicon electronics technology will require the production of large-scale, uniform, and highly crystalline films. We report a route for synthesizing wafer-scale single-crystalline 2H molybdenum ditelluride (MoTe2) semiconductors on an amorphous insulating substrate. In-plane 2D-epitaxy growth by tellurizing was triggered from a deliberately implanted single seed crystal. The resulting single-crystalline film completely covered a 2.5-centimeter wafer with excellent uniformity. The 2H MoTe2 2D single-crystalline film can use itself as a template for further rapid epitaxy in a vertical manner. Transistor arrays fabricated with the as-prepared 2H MoTe2 single crystals exhibited high electrical performance, with excellent uniformity and 100% device yield.

scholarly journals Rapid Single Image-Based DTM Estimation from ExoMars TGO CaSSIS Images Using Generative Adversarial U-Nets

2021 ◽  
Vol 13 (15) ◽  
pp. 2877
Author(s):  
Yu Tao ◽  
Siting Xiong ◽  
Susan J. Conway ◽  
Jan-Peter Muller ◽  
Anthony Guimpier ◽  
...  
Keyword(s):  
High Resolution ◽  
Large Scale ◽  
Imaging System ◽  
Landing Site ◽  
Parameter Tuning ◽  
Processing Parameters ◽  
Input Image ◽  
Large Area ◽  
Laser Altimeter ◽  
Imaging Science

The lack of adequate stereo coverage and where available, lengthy processing time, various artefacts, and unsatisfactory quality and complexity of automating the selection of the best set of processing parameters, have long been big barriers for large-area planetary 3D mapping. In this paper, we propose a deep learning-based solution, called MADNet (Multi-scale generative Adversarial u-net with Dense convolutional and up-projection blocks), that avoids or resolves all of the above issues. We demonstrate the wide applicability of this technique with the ExoMars Trace Gas Orbiter Colour and Stereo Surface Imaging System (CaSSIS) 4.6 m/pixel images on Mars. Only a single input image and a coarse global 3D reference are required, without knowing any camera models or imaging parameters, to produce high-quality and high-resolution full-strip Digital Terrain Models (DTMs) in a few seconds. In this paper, we discuss technical details of the MADNet system and provide detailed comparisons and assessments of the results. The resultant MADNet 8 m/pixel CaSSIS DTMs are qualitatively very similar to the 1 m/pixel HiRISE DTMs. The resultant MADNet CaSSIS DTMs display excellent agreement with nested Mars Reconnaissance Orbiter Context Camera (CTX), Mars Express’s High-Resolution Stereo Camera (HRSC), and Mars Orbiter Laser Altimeter (MOLA) DTMs at large-scale, and meanwhile, show fairly good correlation with the High-Resolution Imaging Science Experiment (HiRISE) DTMs for fine-scale details. In addition, we show how MADNet outperforms traditional photogrammetric methods, both on speed and quality, for other datasets like HRSC, CTX, and HiRISE, without any parameter tuning or re-training of the model. We demonstrate the results for Oxia Planum (the landing site of the European Space Agency’s Rosalind Franklin ExoMars rover 2023) and a couple of sites of high scientific interest.

scholarly journals Application of Novel Non-Thermal Physical Technologies to Degrade Mycotoxins

2021 ◽  
Vol 7 (5) ◽  
pp. 395
Author(s):  
Mohammad Yousefi ◽  
Masoud Aman Mohammadi ◽  
Maryam Zabihzadeh Khajavi ◽  
Ali Ehsani ◽  
Vladimír Scholtz
Keyword(s):  
Electron Beam ◽  
Food Systems ◽  
Large Scale ◽  
Plasma Electron ◽  
Pulsed Light ◽  
Beam Radiation ◽  
Practical Applications ◽  
Electron Beam Radiation ◽  
Non Thermal Plasma ◽  
Agriculture And Food

Mycotoxins cause adverse effects on human health. Therefore, it is of the utmost importance to confront them, particularly in agriculture and food systems. Non-thermal plasma, electron beam radiation, and pulsed light are possible novel non-thermal technologies offering promising results in degrading mycotoxins with potential for practical applications. In this paper, the available publications are reviewed—some of them report efficiency of more than 90%, sometimes almost 100%. The mechanisms of action, advantages, efficacy, limitations, and undesirable effects are reviewed and discussed. The first foretastes of plasma and electron beam application in the industry are in the developing stages, while pulsed light has not been employed in large-scale application yet.

scholarly journals Efficient and large-area all vacuum-deposited perovskite light-emitting diodes via spatial confinement

2021 ◽  
Vol 12 (1) ◽  
Author(s):  
Peipei Du ◽  
Jinghui Li ◽  
Liang Wang ◽  
Liang Sun ◽  
Xi Wang ◽  
...  
Keyword(s):  
High Resolution ◽  
Large Scale ◽  
High Efficiency ◽  
Light Emitting Diodes ◽  
Scale Production ◽  
Nonradiative Recombination ◽  
Large Area ◽  
Spatial Confinement ◽  
Light Emitting ◽  
Large Scale Production

AbstractWith rapid advances of perovskite light-emitting diodes (PeLEDs), the large-scale fabrication of patterned PeLEDs towards display panels is of increasing importance. However, most state-of-the-art PeLEDs are fabricated by solution-processed techniques, which are difficult to simultaneously achieve high-resolution pixels and large-scale production. To this end, we construct efficient CsPbBr3 PeLEDs employing a vacuum deposition technique, which has been demonstrated as the most successful route for commercial organic LED displays. By carefully controlling the strength of the spatial confinement in CsPbBr3 film, its radiative recombination is greatly enhanced while the nonradiative recombination is suppressed. As a result, the external quantum efficiency (EQE) of thermally evaporated PeLED reaches 8.0%, a record for vacuum processed PeLEDs. Benefitting from the excellent uniformity and scalability of the thermal evaporation, we demonstrate PeLED with a functional area up to 40.2 cm2 and a peak EQE of 7.1%, representing one of the most efficient large-area PeLEDs. We further achieve high-resolution patterned perovskite film with 100 μm pixels using fine metal masks, laying the foundation for potential display applications. We believe the strategy of confinement strength regulation in thermally evaporated perovskites provides an effective way to process high-efficiency and large-area PeLEDs towards commercial display panels.

Pattern Writing by Implantation in a Large-Scale PSII System With Planar Inductively Coupled Plasma Source

2000 ◽  
Vol 624 ◽  
Author(s):  
Lingling Wu ◽  
Hongjun Gao ◽  
Dennis M. Manos
Keyword(s):  
Inductively Coupled Plasma ◽  
Large Scale ◽  
Lateral Diffusion ◽  
Plasma Source ◽  
Direct Writing ◽  
Large Area ◽  
Depth Profiles ◽  
Geometric Patterns ◽  
Planar Coil ◽  
Rf Antenna

ABSTRACTA large-scale plasma source immersion ion implantation (PSII) system with planar coil RFI plasma source has been used to study an inkless, deposition-free, mask-based surface conversion patterning as an alternative to direct writing techniques on large-area substrates by implantation. The apparatus has a 0.61 m ID and 0.51 m tall chamber, with a base pressure in the 10−8 Torr range, making it one of the largest PSII presently available. The system uses a 0.43 m ID planar rf antenna to produce dense plasma capable of large-area, uniform materials treatment. Metallic and semiconductor samples have been implanted through masks to produce small geometric patterns of interest for device manufacturing. Si gratings were also implanted to study application to smaller features. Samples are characterized by AES, TEM and variable-angle spectroscopic ellipsometry. Composition depth profiles obtained by AES and VASE are compared. Measured lateral and depth profiles are compared to the mask features to assess lateral diffusion, pattern transfer fidelity, and wall-effects. The paper also presents the results of MAGIC calculations of the flux and angle of ion trajectories through the boundary layer predicting the magnitude of flux as a function of 3-D location on objects in the expanding sheath

Superlubricity Relevant in Hard Disk Drive Applications

2016 ◽  
Author(s):  
Shou-Mo Zhang ◽  
Cuong-C. Vu ◽  
Qun-Yang Li ◽  
Norio Tagawa ◽  
Quan-Shui Zheng
Keyword(s):  
Temperature Dependence ◽  
Hard Disk Drive ◽  
Large Scale ◽  
Hard Disk Drives ◽  
Hard Disk ◽  
Disk Drive ◽  
Force Sensor ◽  
Lubricant Layer ◽  
Single Crystalline ◽  
Crystalline Graphite

Reduction of head-media spacing (HMS) keeps crucial during the increase of areal density of hard disk drives (HDD). The design of hard disk drive with a superlubric interface is reported with two schemes for HDI design to realize superlubricity. For the first scheme, the DLC layer is kept on the disk while removing the lubricant layer. The DLC layer on the transducer is replaced by graphene-like layer. The direct contact between head and disk could reduce the HMS to about 2.3 nm. For the second scheme, the DLC layer on disk is further replaced by graphene and the HMS could be reduced to below 1 nm. For the first scheme, the basic proof of concept experiments are conducted using micro-scale graphite island samples. Ultralow COF, with the average of 0.0344 on the interface of single crystalline graphite surface and DLC substrate is demonstrated by AFM. What’s more, the temperature dependence of friction between single crystalline graphite and DLC is measured by micro-force sensor mounted on micro-manipulator. The results show that heating helps to significantly decrease the friction. Desorption of contaminants along the interface is speculated to be the key mechanism for temperature dependence of friction. This work provides the concept of large-scale superlubricity relevant in HDD applications, which could be a promising technology to ultimately reduce HMS for future HDI development.

Facile and large-scale synthesis of single-crystalline manganese oxyhydroxide/oxide nanostructures

2007 ◽  
Vol 42 (9) ◽  
pp. 1761-1768 ◽  
Author(s):  
Zhen Fang ◽  
Kaibin Tang ◽  
Lisheng Gao ◽  
Dong Wang ◽  
Suyuan Zeng ◽  
...  
Keyword(s):  
Large Scale ◽  
Single Crystalline ◽  
Oxide Nanostructures ◽  
Manganese Oxyhydroxide ◽  
Large Scale Synthesis
Sign in / Sign up

Export Citation Format

Share Document