scholarly journals Thin Film Flow of Couple Stress Magneto-Hydrodynamics Nanofluid with Convective Heat over an Inclined Exponentially Rotating Stretched Surface

Coatings ◽  
2020 ◽  
Vol 10 (4) ◽  
pp. 338 ◽  
Author(s):  
Asifa Tassaddiq ◽  
Ibni Amin ◽  
Meshal Shutaywi ◽  
Zahir Shah ◽  
Farhad Ali ◽  
...  
Keyword(s):  
Thin Film ◽  
Brownian Motion ◽  
Differential Equations ◽  
Prandtl Number ◽  
Ordinary Differential Equations ◽  
Couple Stress ◽  
Magnetic Parameter ◽  
Film Flow ◽  
Thin Film Flow ◽  
Brownian Motion Parameter

In this article a couple stress magneto-hydrodynamic (MHD) nanofluid thin film flow over an exponential stretching sheet with joule heating and viscous dissipation is considered. Similarity transformations were used to obtain a non-linear coupled system of ordinary differential equations (ODEs) from a system of constitutive partial differential equations (PDEs). The system of ordinary differential equations of couple stress magneto-hydrodynamic (MHD) nanofluid flow was solved using the well-known Homotopy Analysis Method (HAM). Nusselt and Sherwood numbers were demonstrated in dimensionless forms. At zero Prandtl number the velocity profile was analytically described. Furthermore, the impact of different parameters over different state variables are presented with the help of graphs. Dimensionless numbers like magnetic parameter M, Brownian motion parameter Nb, Prandtl number Pr, thermophoretic parameter Nt, Schmidt number Sc, and rotation parameter S were analyzed over the velocity, temperature, and concentration profiles. It was observed that the magnetic parameter M increases the axial, radial, drainage, and induced profiles. It was also apparent that Nu reduces with greater values of Pr. On increasing values of the Brownian motion parameter the concentration profile declines, while the thermophoresis parameter increases.

scholarly journals Numerical and Analytical Investigation of an Unsteady Thin Film Nanofluid Flow over an Angular Surface

Processes ◽  
2019 ◽  
Vol 7 (8) ◽  
pp. 486 ◽  
Author(s):  
Haroon Rasheed ◽  
Zeeshan Khan ◽  
Ilyas Khan ◽  
Dennis Ching ◽  
Kottakkaran Nisar
Keyword(s):  
Thin Film ◽  
Boundary Layer ◽  
Brownian Motion ◽  
Prandtl Number ◽  
Three Dimensional ◽  
Rotating Disk ◽  
Motion Parameter ◽  
Concentration Profiles ◽  
Thin Film Flow ◽  
Brownian Motion Parameter

In the present study, we examine three-dimensional thin film flow over an angular rotating disk plane in the presence of nanoparticles. The governing basic equations are transformed into ordinary differential equations by using similarity variables. The series solution has been obtained by the homotopy asymptotic method (HAM) for axial velocity, radial velocity, darning flow, induced flow, and temperature and concentration profiles. For the sake of accuracy, the results are also clarified numerically with the help of the BVPh2- midpoint method. The effect of embedded parameters such as the Brownian motion parameter Nb, Schmidt number Sc, thermophoretic parameter and Prandtl number Pr are explored on velocity, temperature and concentration profiles. It is observed that with the increase in the unsteadiness factor S, the thickness of the momentum boundary layer increases, while the Sherwood number Sc, with the association of heat flow from sheet to fluid, reduces with the rise in S and results in a cooling effect. It is also remarkable to note that the thermal boundary layer increases with the increase of the Brownian motion parameter Nb and Prandtl number Pr, hindering the cooling process resulting from heat transfer.

scholarly journals MHD three dimensional flow of Oldroyd-B nanofluid over a bidirectional stretching sheet: DTM-Padé Solution

2019 ◽  
Vol 8 (1) ◽  
pp. 744-754 ◽  
Author(s):  
Sumit Gupta ◽  
Sandeep Gupta
Keyword(s):  
Brownian Motion ◽  
Differential Equations ◽  
Prandtl Number ◽  
Comparative Study ◽  
Stretching Sheet ◽  
Fluid Velocity ◽  
Deborah Number ◽  
Motion Parameter ◽  
Physical Parameters ◽  
Brownian Motion Parameter

Abstract Current article is devoted with the study of MHD 3D flow of Oldroyd B type nanofluid induced by bi-directional stretching sheet. Expertise similarity transformation is confined to reduce the governing partial differential equations into ordinary nonlinear differential equations. These dimensionless equations are then solved by the Differential Transform Method combined with the Padé approximation (DTM-Padé). Dealings of the arising physical parameters namely the Deborah numbers β1 and β2, Prandtl number Pr, Brownian motion parameter Nb and thermophoresis parameter Nt on the fluid velocity, temperature and concentration profile are depicted through graphs. Also a comparative study between DTM and numerical method are presented by graph and other semi-analytical techniques through tables. It is envisage that the velocity profile declines with rising magnetic factor, temperature profile increases with magnetic parameter, Deborah number of first kind and Brownian motion parameter while decreases with Deborah number of second kind and Prandtl number. A comparative study also visualizes comparative study in details.

scholarly journals Triple Solutions of Carreau Thin Film Flow with Thermocapillarity and Injection on an Unsteady Stretching Sheet

Energies ◽  
2020 ◽  
Vol 13 (12) ◽  
pp. 3177 ◽  
Author(s):  
Kohilavani Naganthran ◽  
Ishak Hashim ◽  
Roslinda Nazar
Keyword(s):  
Thin Film ◽  
Heat Transfer ◽  
Differential Equations ◽  
Film Thickness ◽  
Stretching Sheet ◽  
Film Flow ◽  
Problem Solver ◽  
Thin Film Flow ◽  
Unsteady Stretching Sheet ◽  
Negative Film

Thin films and coatings which have a high demand in a variety of industries—such as manufacturing, optics, and photonics—need regular improvement to sustain industrial productivity. Thus, the present work examined the problem of the Carreau thin film flow and heat transfer with the influence of thermocapillarity over an unsteady stretching sheet, numerically. The sheet is permeable, and there is an injection effect at the surface of the stretching sheet. The similarity transformation reduced the partial differential equations into a system of ordinary differential equations which is then solved numerically by the MATLAB boundary value problem solver bvp4c. The more substantial effect of injection was found to be the reduction of the film thickness at the free surface and development of a better rate of convective heat transfer. However, the increment in the thermocapillarity number thickens the film, reduces the drag force, and weakens the rate of heat transfer past the stretching sheet. The triple solutions are identified when the governing parameters vary, but two of the solutions gave negative film thickness. Detecting solutions with the most negative film thickness is essential because it implies the interruption in the laminar flow over the stretching sheet, which then affects the thin film growing process.

scholarly journals Three-Dimensional Casson Nanofluid Thin Film Flow over an Inclined Rotating Disk with the Impact of Heat Generation/Consumption and Thermal Radiation

Coatings ◽  
2019 ◽  
Vol 9 (4) ◽  
pp. 248 ◽  
Author(s):  
Anwar Saeed ◽  
Zahir Shah ◽  
Saeed Islam ◽  
Muhammad Jawad ◽  
Asad Ullah ◽  
...  
Keyword(s):  
Thin Film ◽  
Boundary Layer ◽  
Differential Equations ◽  
Thermal Boundary Layer ◽  
Energy Transport ◽  
Film Flow ◽  
Three Dimensional ◽  
Concentration Profiles ◽  
Thin Film Flow ◽  
The Impact

In this research, the three-dimensional nanofluid thin-film flow of Casson fluid over an inclined steady rotating plane is examined. A thermal radiated nanofluid thin film flow is considered with suction/injection effects. With the help of similarity variables, the partial differential equations (PDEs) are converted into a system of ordinary differential equations (ODEs). The obtained ODEs are solved by the homotopy analysis method (HAM) with the association of MATHEMATICA software. The boundary-layer over an inclined steady rotating plane is plotted and explored in detail for the velocity, temperature, and concentration profiles. Also, the surface rate of heat transfer and shear stress are described in detail. The impact of numerous embedded parameters, such as the Schmidt number, Brownian motion parameter, thermophoretic parameter, and Casson parameter (Sc, Nb, Nt, γ), etc., were examined on the velocity, temperature, and concentration profiles, respectively. The essential terms of the Nusselt number and Sherwood number were also examined numerically and physically for the temperature and concentration profiles. It was observed that the radiation source improves the energy transport to enhance the flow motion. The smaller values of the Prandtl number, Pr, augmented the thermal boundary-layer and decreased the flow field. The increasing values of the rotation parameter decreased the thermal boundary layer thickness. These outputs are examined physically and numerically and are also discussed.

scholarly journals An Accurate Block Hybrid Collocation Method for Third Order Ordinary Differential Equations

2014 ◽  
Vol 2014 ◽  
pp. 1-9 ◽  
Author(s):  
Lee Ken Yap ◽  
Fudziah Ismail ◽  
Norazak Senu
Keyword(s):  
Differential Equations ◽  
Ordinary Differential Equations ◽  
Collocation Method ◽  
Film Flow ◽  
Direct Solution ◽  
Thin Film Flow ◽  
Block Method ◽  
Third Order ◽  
Block Form ◽  
The Stability

The block hybrid collocation method with two off-step points is proposed for the direct solution of general third order ordinary differential equations. Both the main and additional methods are derived via interpolation and collocation of the basic polynomial. These methods are applied in block form to provide the approximation at five points concurrently. The stability properties of the block method are investigated. Some numerical examples are tested to illustrate the efficiency of the method. The block hybrid collocation method is also implemented to solve the nonlinear Genesio equation and the problem in thin film flow.

scholarly journals Heat Transfer Analysis of Cu and Al 2 0 3 Dispersed in Ethylene Glycol as a Base Fluid over a Stretchable Permeable Sheet of MHD Thin-film Flow

2021 ◽  
Author(s):  
Zeeshan Khan ◽  
Ilyas Khan
Keyword(s):  
Thin Film ◽  
Heat Transfer ◽  
Differential Equations ◽  
Ethylene Glycol ◽  
Film Thickness ◽  
Film Flow ◽  
Heat Transfer Analysis ◽  
Hybrid Nanofluid ◽  
Thin Film Flow ◽  
Thin Film Thickness

Abstract The process of thin films is commonly utilized to improve the surface characteristics of materials. A thin film helps to improve the absorption, depreciation, flexibility, lighting, transport, and electromagnetic efficiency of a bulk material medium. Thin film treatment can be especially helpful in nanotechnology. As a result, the current study investigates the computational process of heat relocation analysis in a thin-film MHD flow embedded in hybrid nanoparticles, which combines the spherical copper and alumina dispersed in ethylene glycol as the conventional heat transfer Newtonian fluid model over a stretching sheet. Important elements such as thermophoresis and Brownian movement are used to explain the characteristics of heat and mass transfer analysis. Nonlinear higher differential equations (ODEs) were attained by transforming partial differential equations (PDEs) into governing equations when implementing the similarity transformation technique. The resulting nonlinear ODEs have been utilized by using the homotopy analysis method (MHD). The natures of the thin-film flow and heat transfer through the various values of the pertinent parameters: unsteadiness, nanoparticle volume fraction, thin-film thickness, magnetic interaction and intensity suction/injection are deliberated. The approximate consequences for flow rate and temperature distributions and physical quantities in terms of local skin friction and Nusselt number were obtained and analysed via graphs and tables. As a consequence, the suction has a more prodigious effect on the hybrid nanofluid than on the injection fluid for all the investigated parameters. It is worth acknowledging that the existence of the nanoparticles and MHD in the viscous hybrid nanofluid tends to enhance the temperature profile but decay the particle movement in the thin-film flow. It is perceived that the velocity and temperature fields decline with increasing unsteadiness, thin-film thickness and suction/injection parameters.

scholarly journals Nanofluid thin film flow of Sisko fluid and variable heat transfer over an unsteady stretching surface with external magnetic field

2019 ◽  
Vol 13 ◽  
pp. 174830181983245 ◽  
Author(s):  
Muhammad Jawad ◽  
Zahir Shah ◽  
Saeed Islam ◽  
Waris Khan ◽  
Aurang Zeb Khan
Keyword(s):  
Magnetic Field ◽  
Thin Film ◽  
Brownian Motion ◽  
Liquid Film ◽  
Film Flow ◽  
Thin Film Flow ◽  
Sisko Fluid ◽  
Variable Heat ◽  
Liquid Film Flow ◽  
Optimal Approach

This research paper investigates two dimensional liquid film flow of Sisko nanofluid with variable heat transmission over an unsteady stretching sheet in the existence of uniform magnetic field. The basic governing time-dependent equations of the nanofluid flow phenomena with Sisko fluid are modeled and reduced to a system of differential equations with use of similarity transformation. The significant influence of Brownian motion and thermophoresis has been taken in the nanofluids model. An optimal approach is used to obtain the solution of the modeled problems. The convergence of the Homotopy Analysis Method (HAM) method has been shown numerically. The variation of the skin friction, Nusselt number and Sherwood number, their influence on liquid film flow with heat and mass transfer have been examined. The influence of the unsteadiness parameter [Formula: see text] over thin film is explored analytically for different values. Moreover for comprehension, the physical presentation of the embedded parameters, like [Formula: see text], magnetic parameter [Formula: see text], stretching parameter [Formula: see text] and Sisko fluid parameters [Formula: see text], Prandtl number Pr, thermophoretic parameter [Formula: see text], Brownian motion parameter [Formula: see text], Schmidt number [Formula: see text] have been represented by graph and discussed.

Numerical treatment of a physical problem in fluid film flow using the differential transformation method

2020 ◽  
Vol 31 (05) ◽  
pp. 2050067
Author(s):  
Khadijah M. Abualnaja
Keyword(s):  
Thin Film ◽  
Heat Flux ◽  
Differential Equations ◽  
Ordinary Differential Equations ◽  
Film Flow ◽  
Transformation Method ◽  
Physical Problem ◽  
Differential Transformation Method ◽  
Numerical Treatment ◽  
Differential Transformation

The problem of thin liquid film flow over a heated horizontal stretching surface permitted by uniform transverse magnetic field in the presence of variable heat flux is studied numerically. The ordinary differential equations describing the physical problem are solved approximately by the differential transformation method (DTM). A study of the convergence analysis of the proposed method is given. The effects of the various parameters governing the thin film flow and heat transfer in this study are discussed and presented graphically. Our paper contributes to the existing literature by introducing the numerical treatment using the DTM for the nonlinear system of ordinary differential equations, which describe a thin film fluid flow affected by the variable heat flux.

Sign in / Sign up

Export Citation Format

Share Document