scholarly journals Efficient Broadband Truncated-Pyramid-Based Metamaterial Absorber in the Visible and Near-Infrared Regions

Crystals ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 784 ◽  
Author(s):  
Phuc Toan Dang ◽  
Tuan V. Vu ◽  
Jongyoon Kim ◽  
Jimin Park ◽  
Van-Chuc Nguyen ◽  
...  
Keyword(s):  
Communication Systems ◽  
Near Infrared ◽  
Cell Structure ◽  
Single Layer ◽  
Normal Incidence ◽  
Transverse Magnetic ◽  
Metamaterial Absorber ◽  
Broadband Absorption ◽  
Polarization Insensitive ◽  
Truncated Pyramid

We present a design of an ultra-broadband metamaterial absorber in the visible and near- infrared regions. The unit cell structure consists of a single layer of metallic truncated-pyramid resonator-dielectric-metal configuration, which results in a high absorption over a broad wavelength range. The absorber exhibits 98% absorption at normal incidence spanning a wideband range of 417–1091 nm, with >99% absorption within 822–1054 nm. The broadband absorption stability maintains 95% at large incident angles up to 40° for the transverse electric (TE)-mode and 20° for the transverse magnetic (TM)-mode. Furthermore, the polarization-insensitive broadband absorption is presented in this paper by analyzing absorption performance with various polarization angles. The proposed absorber can be applied for applications such as solar cells, infrared detection, and communication systems thanks to the convenient and compatible bandwidth for electronic THz sources.

scholarly journals Electrically Tunable Broadband Terahertz Absorption with Hybrid-Patterned Graphene Metasurfaces

Nanomaterials ◽  
2018 ◽  
Vol 8 (8) ◽  
pp. 562 ◽  
Author(s):  
Longfang Ye ◽  
Xin Chen ◽  
Guoxiong Cai ◽  
Jinfeng Zhu ◽  
Na Liu ◽  
...  
Keyword(s):  
Incident Angle ◽  
Single Layer ◽  
Normal Incidence ◽  
Transverse Magnetic ◽  
Single Layer Graphene ◽  
Terahertz Waves ◽  
Broadband Absorption ◽  
Terahertz Sensing ◽  
Axisymmetric Configuration ◽  
Broadband Terahertz

We numerically demonstrate a broadband terahertz (THz) absorber that is based on a hybrid-patterned graphene metasurface with excellent properties of polarization insensitivity, wide-angle, and active tunability. Our design is made up of a single-layer graphene with periodically arranged hybrid square/disk/loop patterns on a multilayer structure. We find that broadband absorption with 90% terahertz absorbance and the fractional bandwidth of 84.5% from 1.38 THz to 3.4 THz can be achieved. Because of the axisymmetric configuration, the absorber demonstrates absolute polarization independence for both transverse electric (TE) and transverse magnetic (TM) polarized terahertz waves under normal incidence. We also show that a bandwidth of 60% absorbance still remains 2.7 THz, ranging from 1.3 THz to 4 THz, for a wide incident angle ranging from 0° to 60°. Finally, we find that by changing the graphene Fermi energy from 0.7 eV to 0 eV, the absorbance of the absorbers can be easily tuned from more than 90% to lower than 20%. The proposed absorber may have promising applications in terahertz sensing, detecting, imaging, and cloaking.

scholarly journals A Broadband Tunable Terahertz Metamaterial Absorber Based on Single-Layer Complementary Gammadion-Shaped Graphene

Materials ◽  
2020 ◽  
Vol 13 (4) ◽  
pp. 860 ◽  
Author(s):  
Fu Chen ◽  
Yongzhi Cheng ◽  
Hui Luo
Keyword(s):  
Energy Level ◽  
Graphene Sheet ◽  
Fermi Energy ◽  
Single Layer ◽  
Dielectric Substrate ◽  
Transverse Magnetic ◽  
Metamaterial Absorber ◽  
Absorption Capacity ◽  
Fermi Energy Level ◽  
Broadband Absorption

We present a simple design of a broadband tunable metamaterial absorber (MMA) in the terahertz (THz) region, which consists of a single layer complementary gammadion-shaped (CGS) graphene sheet and a polydimethylsiloxane (PDMS) dielectric substrate placed on a continuous metal film. The Fermi energy level (Ef) of the graphene can be modulated dynamically by the applied DC bias voltage, which enables us to electrically control the absorption performance of the proposed MMA flexibly. When Ef = 0.8 eV, the relative bandwidth of the proposed MMA, which represents the frequency region of absorption beyond 90%, can reaches its maximal value of 72.1%. Simulated electric field distributions reveal that the broadband absorption mainly originates from the excitation of surface plasmon polaritons (SPPs) on the CGS graphene sheet. Furthermore, the proposed MMA is polarization-insensitive and has wide angles for both transverse-electric (TE) and transverse-magnetic (TM) waves in the broadband frequency range. The broadband absorption capacity of the designed MMA can be effectively adjusted by varying the Fermi energy level of graphene. Lastly, the absorbance of the MMA can be adjusted from 42% to 99.1% by changing the Ef from 0 eV to 0.8 eV, which is in agreement with the theoretical calculation by using the interference 41theory. Due to its simple structure and flexible tunability, the proposed MMA has potential application prospects in tunable filtering, modulators, sensing, and other multispectral devices.

scholarly journals A Co-Polarization Broadband Radar Absorber for RCS Reduction

Materials ◽  
2018 ◽  
Vol 11 (9) ◽  
pp. 1668 ◽  
Author(s):  
Thtreswar Beeharry ◽  
Riad Yahiaoui ◽  
Kamardine Selemani ◽  
Habiba Ouslimani
Keyword(s):  
Single Layer ◽  
Normal Incidence ◽  
Transverse Magnetic ◽  
Center Frequency ◽  
Transmission Line Model ◽  
Absorption Mechanism ◽  
Broadband Absorption ◽  
Electric And Magnetic Fields ◽  
Physical Insight ◽  
Good Agreement

In this article, a single layer co-polarization broadband radar absorber is presented. Under normal incidence, it achieves at least 90% of absorption from 5.6 GHz to 9.1 GHz for both Transverse Electric (TE) and Transverse Magnetic (TM) polarizations. Our contribution and the challenge of this work is to achieve broadband absorption using a very thin single layer dielectric and it is achieved by rotating the resonating element by 45°. An original optimized Underlined U shape has been developed for the resonating element which provides a broadband co-polarization absorption. The structure is 12.7 times thinner than the wavelength at the center frequency. To understand the absorption mechanism, the transmission line model of an absorber and the three near unity absorption peaks at 5.87 GHz, 7.16 GHz and 8.82 GHz have been used to study the electric and magnetic fields. The physical insight of how the three near unity absorption peaks are achieved has also been discussed. After fabricating the structure, the measurements were found to be in good agreement with the simulation results. Furthermore, with the proposed original UUSR resonating element, the operational bandwidth to thickness ratio of 6.43 is obtained making the proposed UUSR very competitive.

A Multiple-Bands Metamaterial Absorber Based in X, Ku and K-Band

2021 ◽  
Author(s):  
Muhammad Fahim Zafar ◽  
Usman Masud
Keyword(s):  
Single Layer ◽  
Wide Band ◽  
Metamaterial Absorber ◽  
Basic Unit ◽  
Frequency Range ◽  
Structure Form ◽  
Perfect Absorption ◽  
Polarization Insensitive ◽  
Band Absorption ◽  
K Band

Abstract Developing a highly efficient and multiple-bands metamaterial absorber is a hot issue in recent era. In this paper, A multiple-bands metamaterial absorber has been presented which is based in X, Ku and K-band. Firstly, we have designed two single layer basic unit cell of X-shape and cross-shape, then they are arranged in the multi-layers structure form for the purpose of obtaining multiple- bands and wide band absorption. The proposed absorber is able to work in multiple bands because it has six peaks in the frequency range of 8–24 GHz with having near perfect absorption. Moreover, the sixth peak has a wideband absorption which is 2.93 GHz. Furthermore, the proposed absorber is also tested for polarization insensitivity and also for oblique incidence. Absorption was found polarization insensitive with almost perfect absorption.

scholarly journals Design and Fabrication of a Triple-Band Terahertz Metamaterial Absorber

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1110
Author(s):  
Jinfeng Wang ◽  
Tingting Lang ◽  
Zhi Hong ◽  
Meiyu Xiao ◽  
Jing Yu
Keyword(s):  
Optical Communication ◽  
Transverse Magnetic ◽  
Metamaterial Absorber ◽  
Absorption Mechanism ◽  
Symmetric Configuration ◽  
Electric And Magnetic Fields ◽  
Polarization Insensitive ◽  
Band Absorption ◽  
High Absorption ◽  
Triple Band

We presented and manufactured a triple-band terahertz (THz) metamaterial absorber with three concentric square ring metallic resonators, a polyethylene terephthalate (PET) layer, and a metallic substrate. The simulation results demonstrate that the absorptivity of 99.5%, 86.4%, and 98.4% can be achieved at resonant frequency of 0.337, 0.496, and 0.718 THz, respectively. The experimental results show three distinct absorption peaks at 0.366, 0.512, and 0.751 THz, which is mostly agreement with the simulation. We analyzed the absorption mechanism from the distribution of electric and magnetic fields. The sensitivity of the three peaks of this triple-band absorber to the surrounding is 72, 103.5, 139.5 GHz/RIU, respectively. In addition, the absorber is polarization insensitive because of the symmetric configuration. The absorber can simultaneously exhibit high absorption effect at incident angles up to 60° for transverse electric (TE) polarization and 70° for transverse magnetic (TM) polarization. This presented terahertz metamaterial absorber with a triple-band absorption and easy fabrication can find important applications in biological sensing, THz imaging, filter and optical communication.

Investigation of a broadband and polarization-insensitive optical absorber based on closed-ring resonator

2016 ◽  
Vol 25 (03) ◽  
pp. 1650032 ◽  
Author(s):  
Dan Hu ◽  
Hong-Yan Wang ◽  
Qiao-Fen Zhu ◽  
Xi-Wei Zhang ◽  
Zhen-Jie Tang
Keyword(s):  
Ring Resonator ◽  
Metamaterial Absorber ◽  
Broadband Absorption ◽  
Solar Energy Harvesting ◽  
Closed Ring ◽  
Visible Wavelength Range ◽  
Potential Applications ◽  
Polarization Insensitive ◽  
Sandwiched Structure ◽  
Compact Design

A broadband and polarization-insensitive optical metamaterial absorber (MA) based on the refractory metal chromium (Cr) closed-ring resonator is theoretically investigated. The semiconducting silicon dioxide (SiO[Formula: see text] thin film is introduced as the space layer in this sandwiched structure. Utilizing the symmetrical geometry of the proposed MA structure, polarization insensitivity of the broadband absorption is gained. The simulation results show that the absorber with Cr closed-ring array obtains an average absorption of 99.25% from 400[Formula: see text]nm to 900[Formula: see text]nm, covering the total visible wavelength range. This compact design may have potential applications in solar energy harvesting, thermal imaging, and emissivity control.

Graphene-based single-layer elliptical pattern metamaterial absorber for adjustable broadband absorption in terahertz range

2019 ◽  
Vol 94 (10) ◽  
pp. 105507 ◽  
Author(s):  
Song Wu ◽  
Dace Zha ◽  
Ling Miao ◽  
Yun He ◽  
Jianjun Jiang
Keyword(s):  
Single Layer ◽  
Metamaterial Absorber ◽  
Terahertz Range ◽  
Broadband Absorption

scholarly journals Broadband microwave metamaterial absorber with lumped resistor loading

2019 ◽  
Vol 6 ◽  
pp. 1 ◽  
Author(s):  
Ke Chen ◽  
Xinyao Luo ◽  
Guowen Ding ◽  
Junming Zhao ◽  
Yijun Feng ◽  
...  
Keyword(s):  
Electromagnetic Compatibility ◽  
Design Principle ◽  
Transverse Electric ◽  
Transverse Magnetic ◽  
Metamaterial Absorber ◽  
Absorption Bandwidth ◽  
Practical Applications ◽  
Angular Performance ◽  
Polarization Insensitive ◽  
Metamaterial Absorbers

Narrow absorption bandwidth has been a fundamental drawback hindering many metamaterial absorbers for practical applications. In this paper, by loading lumped resistors, we have successfully designed a microwave metamaterial absorber with multioctave wide absorption bandwidth covering the entire X- and Ku-bands, while keeping the thickness of the absorber less than 1/10 of the working wavelength. The polarization-insensitive absorber shows a good angular stability for both transverse electric (TE) and transverse magnetic (TM) incidences. Prototype has been fabricated and measured to validate the design principle and the simulated results, and good agreements are observed between simulated and measured results. The proposed metamaterial absorber offers an efficient way to realize broadband microwave absorption with stable angular performance, which may find potential uses in many applications, for example, electromagnetic compatibility.

scholarly journals A dual-band polarization insensitive metamaterial absorber with a single metal square patch for sensing application

2021 ◽  
Author(s):  
Yongqiang Kang ◽  
Jun Wang ◽  
Homgmei Liu
Keyword(s):  
Cell Structure ◽  
Resonance Wavelength ◽  
Metamaterial Absorber ◽  
Dual Band ◽  
First Order ◽  
Narrow Line Width ◽  
Surface Lattice ◽  
Diffraction Mode ◽  
Polarization Insensitive ◽  
Band Absorption

Abstract We proposed a dual-band polarization-insensitive metamaterial absorber consisting of merely the metal square patch and a continuous metal ground separated by a middle dielectric layer. Two resonance peaks derived from `the fundamental resonance (with 97% absorbance) and the surface lattice resonance (with 99% absorbance) are realized. It is different from previous work the dual-band response is obtained by combining two resonances of different sizes. Moreover, a first-order diffraction mode of grating predicted the resonance wavelength of the proposed absorber. The surface electromagnetic field distributions of the unit-cell structure reveal the physical origin of the dual-band absorption. Importantly, the first absorption peak result from surface lattice resonance with narrow line-width has large sensitivity perform and high quality factor, which has significant potential in the application of biosensors and monitoring.

scholarly journals A Dual-band Polarization Insensitive Metamaterial Absorber With a Single Metal Square Patch for Sensing Application

2021 ◽  
Author(s):  
Yongqiang Kang ◽  
Jun Wang ◽  
Hongmei Liu
Keyword(s):  
Cell Structure ◽  
Resonance Wavelength ◽  
Metamaterial Absorber ◽  
Dual Band ◽  
First Order ◽  
Narrow Line Width ◽  
Surface Lattice ◽  
Diffraction Mode ◽  
Polarization Insensitive ◽  
Band Absorption

Abstract We proposed a dual-band polarization-insensitive metamaterial absorber consisting of merely the metal square patch and a continuous metal ground separated by a middle dielectric layer. Two resonance peaks derived from `the fundamental resonance (with 97% absorbance) and the surface lattice resonance (with 99% absorbance) are realized. It is different from previous work the dual-band response is obtained by combining two resonances of different sizes. Moreover, a first-order diffraction mode of grating predicted the resonance wavelength of the proposed absorber. The surface electromagnetic field distributions of the unit-cell structure reveal the physical origin of the dual-band absorption. Importantly, the first absorption peak result from surface lattice resonance with narrow line-width has large sensitivity perform and high quality factor, which has significant potential in the application of biosensors and monitoring.

Sign in / Sign up

Export Citation Format

Share Document