scholarly journals Picomolar-Level Melamine Detection via ATP Regulated CeO2 Nanorods Tunable Peroxidase-Like Nanozyme-Activity-Based Colorimetric Sensor: Logic Gate Implementation and Real Sample Analysis

Crystals ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 178
Author(s):  
Benazir Chishti ◽  
Zubaida A. Ansari ◽  
Hassan Fouad ◽  
Othman Y. Alothman ◽  
Mohamed Hashem ◽  
...  
Keyword(s):  
Linear Response ◽  
Limit Of Detection ◽  
Logic Gate ◽  
Colorimetric Sensor ◽  
Blue Color ◽  
Neutral Ph ◽  
Colorimetric Response ◽  
Relative Standard ◽  
Functional Logic ◽  
Gate Sensor

The capability of functional logic operations is highly intriguing, but far from being realized owing to limited recognition element (RE) and complex readout signals, which limit their applications. In this contribution, for a visual colorimetric sensor for melamine (MEL) we described the construction of two- and three-input AND logic gate by exploiting the intrinsic peroxidase (POD)-like activity of CeO2 nanorods (NRs) (~23.04% Ce3+ fraction and aspect ratio (RTEM) of 3.85 ± 0.18) as RE at acidic pH (4.5). Further ATP piloted catalytic tuning of POD-like activity in CeO2 NRs employed for a functional logic gate-controlled MEL sensing at neutral pH (7.4). AND logic circuit operated MEL sensing record colorimetric response time of 15 min to produce blue color proportionate to MEL concentration. The fabricated nanozyme (CeO2)-based logic gate sensor probe for MEL at pH 4.5 showed a linear response from 0.004 nM to 1.56 nM with a limit of detection (LOD) of 4 pM; while translation from acidic to neutral pH (at 7.4) sensor exhibited linear response ranging from 0.2 nM to 3.12 nM with a LOD value of 17 pM. Through CeO2 POD-like nanozyme behavior under acidic and neutral pH, the fabricated logic gate sensor showed high affinity for MEL, generating prominent visual output with picomolar sensitivity, good reproducibility, and stability with relative standard deviation (RSD) <1% and 2%, respectively. A feasibility study in real samples (raw milk and milk powder) showed good recoveries with negligible matrix effect, an anti-interference experiment revealed sensor selectivity, highlighting robust sensor practical utility. With the merits of high sensitivity, specificity, low cost, and simplified sample processing, the developed logic-controlled colorimetric MEL sensing platform with appropriate modifications can be recognized as a potent methodology for on-site analysis of various food adulterants and related applications.

A Novel Multifunctional Near-Infrared Absorbing Dye for Hg2+ Recognition

2013 ◽  
Vol 320 ◽  
pp. 460-464
Author(s):  
Lei Hu ◽  
Ya Fei Zhang ◽  
Fang Kuo Wang ◽  
Zheng Quan Yan
Keyword(s):  
Standard Deviation ◽  
Aqueous Medium ◽  
Correlation Coefficient ◽  
Relative Standard Deviation ◽  
Near Infrared ◽  
High Selectivity ◽  
Limit Of Detection ◽  
Colorimetric Sensor ◽  
Uv Absorbance ◽  
Relative Standard

A novel near-infrared absorbing colorimetric sensor with multifunctional groups, bis-dibenzo-18-crown-6 squaraine (BCSQ), has been identified and applied for accurate Hg2+analysis based on the decrement of its UV absorbance (A) in the aqueous medium. The proposed method was successfully applied to analyse synthetic Hg2+samples and natural Hg2+samples. The results show that the linear range of Hg2+detection in aqueous medium is 7.5~150×108mol·L1with a correlation coefficient (R) of 0.9983 and a limit of detection (3σ, n=20) of 5.6 ×109mol·L1. The relative standard deviation (R.S.D.) for Hg2+detection was lower than 2.4% (n=5). The proposed method possesses the advantages of simplicity, rapidity, high selectivity and sensitivity.

Calcium/Copper alginate framework doped with CuO nano-particles as a novel adsorbent for micro-extraction of benzodiazepines from human serum

2020 ◽  
Vol 16 ◽  
Author(s):  
Nadereh Rahbar ◽  
Fatemeh Ahmadi ◽  
Zahra Ramezani ◽  
Masoumeh Nourani
Keyword(s):  
Human Serum ◽  
High Performance ◽  
Limit Of Detection ◽  
Solid Phase ◽  
Nano Particles ◽  
Limit Of Quantification ◽  
Analytical Methodology ◽  
Fiber Fabrication ◽  
Relative Standard ◽  
Green Procedure

Background: Sample preparation is one of the most challenging phases in pharmaceutical analysis, especially in biological matrices, affecting the whole analytical methodology. Objective: In this study, a new Ca(II)/Cu(II)/alginate/CuO nanoparticles hydrogel fiber (CCACHF) was synthesized through a simple, green procedure and applied for fiber micro solid phase extraction (FMSPE) of diazepam (DIZ) and oxazepam (OXZ) as model drugs prior to high-performance liquid chromatography-UV detection (HPLC-UV). Methods: Composition and morphology of the prepared fiber were characterized and the effect of main parameters on the fiber fabrication and extraction efficiency have been studied and optimized. Results: In optimal conditions, calibration curves were linear ranging between 0.1–500 µg L−1 with regression coefficients of 0.9938 and 0.9968. Limit of detection (LOD) (S/N=3) and limit of quantification (LOQ) (S/N=10) of the technique for DIZ and OXZ were 0.03 to 0.1 µg L−1. Within-day and between-day relative standard deviations (RSDs) for DIZ and OXZ were 6.0–12.5% and 3.3–9.4%, respectively. Conclusion: The fabricated adsorbent has been substantially employed to extraction of selected benzo-diazepines (BZDs) from human serum real specimens and the obtained recoveries were also satisfactory (82.1-109.7%).

scholarly journals Stability-indicating HPLC-DAD assay for simultaneous quantification of hydrocortisone 21 acetate, dexamethasone, and fluocinolone acetonide in cosmetics

2020 ◽  
Vol 18 (1) ◽  
pp. 962-973
Author(s):  
Saira Arif ◽  
Sadia Ata
Keyword(s):  
Mobile Phase ◽  
Limit Of Detection ◽  
Fluocinolone Acetonide ◽  
Internal Diameter ◽  
Forced Degradation ◽  
Specific Method ◽  
Regression Equations ◽  
Limit Of Quantification ◽  
Simultaneous Quantification ◽  
Relative Standard

AbstractA rapid and specific method was developed for simultaneous quantification of hydrocortisone 21 acetate (HCA), dexamethasone (DEX), and fluocinolone acetonide (FCA) in whitening cream formulations using reversed-phase high-performance liquid chromatography. The effect of the composition of the mobile phase, analysis temperature, and detection wavelength was investigated to optimize the separation of studied components. The analytes were finally well separated using ACE Excel 2, C18 AR column having 150 mm length, 3 mm internal diameter, and 2 µm particle size at 35°C using methanol with 1% formic acid and double-distilled deionized water in the ratio of 60:40 (v/v), respectively, as the mobile phase in isocratic mode. Ten microliters of sample were injected with a flow rate of 0.5 mL/min. The specificity, linearity, accuracy, precision, recovery, limit of detection (LOD), limit of quantification (LOQ), and robustness were determined to validate the method as per International Conference on Harmonization guidelines. All the analytes were simultaneously separated within 8 min, and observed retention times of HCA, DEX, and FCA were 4.5, 5.5, and 6.9 min, respectively. The proposed method showed good linearity with the correlation coefficient, R2 = 0.999 over the range of 1–150 µg/mL for all standards. The linear regression equations were y = 12.7x + 118.7 (r = 0.999) for HCA, y = 12.9x + 106.8 (r = 0.999) for DEX, and y = 12.9x + 96.8 (r = 0.999) for FCA. The LOD was 0.25, 0.20, and 0.08 µg/mL for HCA, FCA, and DEX and LOQ was 2.06, 1.83, and 1.55 µg/mL for HCA, FCA, and DEX, respectively. The recovery values of HCA, DEX, and FCA ranged from 100.7–101.3, 102.0–102.6, and 100.2–102.0%, respectively, and the relative standard deviation for precision (intra- and interday) was less than 2, which indicated repeatability and reproducibility. The novelty of the method was described by forced degradation experimentation of all analytes in the combined form under acidic, basic, oxidative, and thermal stress. The proposed method was found to be simple, rapid, and reliable for the simultaneous determination of HCA, DEX, and FCA in cosmetics.

scholarly journals A novel LC-MS method development and validation for the determination of phenyl vinyl sulfone in eletriptan hydrobromide

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Indhu Priya Mabbu ◽  
G. Sumathi ◽  
N. Devanna
Keyword(s):  
Method Development ◽  
Limit Of Detection ◽  
Vinyl Sulfone ◽  
Limit Of Quantification ◽  
Relative Standard ◽  
Pressure Chemical Ionization ◽  
Pressure Chemical ◽  
Development And Validation ◽  
Phenyl Vinyl

Abstract Background The aim of the present method is to develop and validate a specific, sensitive, precise, and accurate liquid chromatography-mass spectrometry (LC-MS) method for the estimation of the phenyl vinyl sulfone in the eletriptan hydrobromide. The effective separation of the phenyl vinyl sulfone was achieved by the Symmetry C18 (50 × 4.6 mm, 3.5 μm) column and a mobile phase composition of 0.1%v/v ammonia buffer to methanol (5:95 v/v), using 0.45 ml/min flow rate and 20 μl of injection volume, with methanol used as diluent. The phenyl vinyl sulfone was monitored on atomic pressure chemical ionization mode mass spectrometer with positive polarity mode. Results The retention time of phenyl vinyl sulfone was found at 2.13 min. The limit of detection (LOD) and limit of quantification (LOQ) were observed at 1.43 ppm and 4.77 ppm concentration respectively; the linear range was found in the concentration ranges from 4.77 to 27.00 ppm with regression coefficient of 0.9990 and accuracy in the range of 97.50–102.10%. The percentage relative standard deviation (% RSD) for six replicates said to be injections were less than 10%. Conclusion The proposed method was validated successfully as per ICH guidelines. Hence, this is employed for the determination of phenyl vinyl sulfone in the eletriptan hydrobromide.

scholarly journals A highly sensitive octopus-like azobenzene fluorescent probe for determination of abamectin B1 in apples

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Zhenlong Guo ◽  
YiFei Su ◽  
Kexin Li ◽  
MengYi Tang ◽  
Qiang Li ◽  
...  
Keyword(s):  
Fluorescent Probe ◽  
Limit Of Detection ◽  
Quantitative Detection ◽  
Fluorescence Signal ◽  
Ionization Mass ◽  
Limit Of Quantification ◽  
Visible Absorption ◽  
Esi Ms ◽  
Relative Standard ◽  
Ft Ir

AbstractThe development of detecting residual level of abamectin B1 in apples is of great importance to public health. Herein, we synthesized a octopus-like azobenzene fluorescent probe 1,3,5-tris (5′-[(E)-(p-phenoxyazo) diazenyl)] benzene-1,3-dicarboxylic acid) benzene (TPB) for preliminary detection of abamectin B1 in apples. The TPB molecule has been characterized by ultraviolet–visible absorption spectrometry, 1H-nuclear magnetic resonance, fourier-transform infrared (FT-IR), electrospray ionization mass spectroscopy (ESI-MS) and fluorescent spectra. A proper determination condition was optimized, with limit of detection and limit of quantification of 1.3 µg L−1 and 4.4 μg L−1, respectively. The mechanism of this probe to identify abamectin B1 was illustrated in terms of undergoing aromatic nucleophilic substitution, by comparing fluorescence changes, FT-IR and ESI-MS. Furthermore, a facile quantitative detection of the residual abamectin B1 in apples was achieved. Good reproducibility was present based on relative standard deviation of 2.2%. Six carboxyl recognition sites, three azo groups and unique fluorescence signal towards abamectin B1 of this fluorescent probe demonstrated reasonable sensitivity, specificity and selectivity. The results indicate that the octopus-like azobenzene fluorescent probe can be expected to be reliable for evaluating abamectin B1 in agricultural foods.

Development of a solid-phase extraction – spectrofluorimetric method for trace glutathione determination

2011 ◽  
Vol 89 (4) ◽  
pp. 517-523 ◽  
Author(s):  
Ke-Jing Huang ◽  
Cong-Hui Han ◽  
Ying-Ying Wu ◽  
Chao-Qun Han ◽  
De-Jun Niu ◽  
...  
Keyword(s):  
Solid Phase Extraction ◽  
Limit Of Detection ◽  
Solid Phase ◽  
Signal To Noise Ratio ◽  
Calibration Graph ◽  
Extraction Column ◽  
Phase Extraction ◽  
Selective Reaction ◽  
Spectrofluorimetric Method ◽  
Relative Standard

A simple and efficient solid-phase extraction – spectrofluorimetric method has been developed to determine glutathione (GSH). Fluorescent probe N-(4,4-difluoro-5,7-dimethyl-4-bora-3a,4a-diaza-s-indacene-3-yl)methyl)iodoacetamide (BODIPY Fl-C1-IA) was used as the derivatization reagent. The procedure was based on a BODIPY Fl-C1-IA selective reaction with GSH to form the highly fluorescent product BODIPY Fl-C1-IA–GSH, using a solid-phase extraction column and spectrofluorimetric determination. The variables affecting analytical performance were studied and optimized. The calibration graph using the preconcentration system for GSH was linear over the range of 1–200 nmol/L with a limit of detection of 0.05 nmol/L (signal-to-noise ratio = 3). The relative standard deviation for six replicate determinations of GSH at the 100 nmol/L concentration level was 3.9%. The method was applied to water samples and average recoveries between 87.5% and 111.5% were obtained for spiked samples.

Rapid and Sensitive Liquid Chromatographic Method for Determination of Anastrozole in Different Polymer–Lipid Hybrid Nanoparticles

2021 ◽  
pp. 247263032098230
Author(s):  
Dilshad Ahmad ◽  
Faisal A. Al Meshaiti ◽  
Yazeed K. Al Anazi ◽  
Osama Al Owassil ◽  
Alaa Eldeen B. Yassin
Keyword(s):  
High Performance ◽  
Limit Of Detection ◽  
Reversed Phase ◽  
Hplc Method ◽  
Hybrid Nanoparticles ◽  
Array Detector ◽  
Relative Standard ◽  
Validation Parameters ◽  
Limit Of Quantitation ◽  
Inhibitor Drug

Anastrozole, an aromatase inhibitor drug, is used for the treatment of breast cancer in pre- and postmenopausal women. Anastrozole’s incorporation into nanoparticulate carriers would enhance its therapeutic performance. To perceive the exact loaded amount of drug in nanocarriers, a valid analytical method is required. The reversed-phase high-performance liquid chromatography (RP-HPLC) method was developed and validated by using the C18 column, 150 × 4.6 mm, 5 µm particle size, in isocratic mobile phase composed of 50:50 V/V (volume/volume) acetonitrile–phosphate buffer (pH 3) flowing at a rate of 1.0 mL/min, and a diode array detector (DAD) set at λmax = 215 nm. The validation parameters such as linearity, accuracy, specificity, precision, and robustness have proven the accuracy of the method, with the relative standard deviation percentage (% RSD) values < 2. The limit of detection of the method was found equal to 0.0150 µg/mL, and the limit of quantitation was 0.0607 µg/mL. The percent recovery of sample was in the range of 98.04–99.25%. The method has the advantage of being rapid with a drug retention time of 2.767 min, specific in terms of resolution of peaks void of interference with any of the excipients, and high reproducibility. This makes it highly applicable for quality control purposes.

scholarly journals Determination of cobalt in water samples by atomic absorption spectrometry after pre-concentration with a simple ionic liquid-based dispersive liquid-liquid micro-extraction methodology

2010 ◽  
Vol 8 (3) ◽  
pp. 617-625 ◽  
Author(s):  
Hossein Abdolmohammad-Zadeh ◽  
Elnaz Ebrahimzadeh
Keyword(s):  
Ionic Liquid ◽  
Atomic Absorption Spectrometry ◽  
Atomic Absorption ◽  
Water Samples ◽  
Limit Of Detection ◽  
Absorption Spectrometry ◽  
Experimental Conditions ◽  
Flame Atomic Absorption ◽  
Relative Standard

AbstractA rapid dispersive liquid-liquid micro-extraction (DLLME) methodology based on the application of 1-hexylpyridinium hexafluorophosphate [C6py][PF6] ionic liquid (IL) as an extractant solvent was applied for the pre-concentration of trace levels of cobalt prior to determination by flame atomic absorption spectrometry (FAAS). 1-Phenyl-3-methyl-4-benzoyl-5-pyrazolone (PMBP) was employed as a chelator forming a Co-PMBP complex to extract cobalt ions from aqueous solution into the fine droplets of [C6py][PF6]. Some effective factors that influence the micro-extraction efficiency include the pH, the PMBP concentration, the amount of ionic liquid, the ionic strength, the temperature and the centrifugation time which were investigated and optimized. In the optimum experimental conditions, the limit of detection (3s) and the enrichment factor were 0.70 µg L−1 and 60, respectively. The relative standard deviation (RSD) for six replicate determinations of 50 µg L−1 Co was 2.36%. The calibration graph using the pre-concentration system was linear at levels 2–166 µg L−1 with a correlation coefficient of 0.9982. The applicability of the proposed method was evaluated by the determination of trace amounts of cobalt in several water samples.

Simultaneous Determination of Four Herbicide and Pesticide Residues in Chinese Green Tea Using QuEChERS Purification Procedure and UPLC-MS/MS Analysis

2013 ◽  
Vol 634-638 ◽  
pp. 1586-1590
Author(s):  
Su Fang Wang ◽  
Shou Jie Zhang ◽  
Chun Hong Dong ◽  
Guo Qing Wang ◽  
Jun Feng Guo ◽  
...  
Keyword(s):  
Formic Acid ◽  
Simultaneous Determination ◽  
Green Tea ◽  
Limit Of Detection ◽  
Multiple Reaction Monitoring ◽  
Graphitized Carbon Black ◽  
Ms Analysis ◽  
Relative Standard ◽  
Limit Of Quantitation

A method for simultaneous determination of residuals of four herbicides and pesticides, simazine, carboxin, diflubenzuron and rotenone, in Chinese green tea was developed. In the proposed method, the tea powder was placed in a centrifuge tube with a plug, extracted in saturated aqueous sodium chloride solution and acetonitrile, agitated using vortex oscillator, and then centrifuged 5 min at 4000 rpm. The supernatant solution was purified by primary secondary amine (PSA) sorbent, C18 power, and graphitized carbon black powder, respectively. Then the purified extracts were dissolved with acetonitrile:0.1% formic acid aqueous solution (40:60, V/V) and agitated, filtered using a syringe with 0.22 μm nylon filter prior to UPLC-MS/MS analysis. The UPLC analysis was performed on an ACQUITY UPLC® HSS T3 column (2.1 mm×100 mm, 1.8 µm), using acetonitrile-0.1% formic acid as mobile phase with the flow rate as 0.3 mL•min-1. Injection volume was 10 µL. Positive ionization mode was applied, and the ions were monitored in the multiple reaction monitoring (MRM) mode with curtain gas 0.069 MPa, collision gas 0.052 MPa, ESI ion spray voltage 5000 V, temperature 550 °C, nebulizer gas 0.24 MPa, and turbo gas 0.28 MPa. The limit of detection (LOD) and limit of quantitation (LOQ) of the proposed method are 1 μg•kg-1and 5 μg•kg-1, respectively. The average recoveries of the four pesticides at 10, 20, and 50 µg•kg-1spiking levels range from 77.4% to 95.3%. TheSupersSuperscript textcript textrelative standard deviation (RSD) (n=6) range form 11.83% to 4.52%.

scholarly journals Determination of 77 Multiclass Pesticides and Their Metabolitesin Capsicum and Tomato Using GC-MS/MS and LC-MS/MS

Molecules ◽  
2021 ◽  
Vol 26 (7) ◽  
pp. 1837
Author(s):  
Harischandra Naik Rathod ◽  
Bheemanna Mallappa ◽  
Pallavi Malenahalli Sidramappa ◽  
Chandra Sekhara Reddy Vennapusa ◽  
Pavankumar Kamin ◽  
...  
Keyword(s):  
Limit Of Detection ◽  
Solid Phase ◽  
Graphitized Carbon Black ◽  
Limit Of Quantification ◽  
Gas And Liquid Chromatography ◽  
Relative Standard ◽  
The Matrix ◽  
Liquid Chromatography Tandem Mass ◽  
Primary Secondary Amine

A quick, sensitive, and reproducible analytical method for the determination of 77 multiclass pesticides and their metabolites in Capsicum and tomato by gas and liquid chromatography tandem mass spectrometry was standardized and validated. The limit of detection of 0.19 to 10.91 and limit of quantification of 0.63 to 36.34 µg·kg−1 for Capsicum and 0.10 to 9.55 µg·kg−1 (LOD) and 0.35 to 33.43 µg·kg−1 (LOQ) for tomato. The method involves extraction of sample with acetonitrile, purification by dispersive solid phase extraction using primary secondary amine and graphitized carbon black. The recoveries of all pesticides were in the range of 75 to 110% with a relative standard deviation of less than 20%. Similarly, the method precision was evaluated interms of repeatability (RSDr) and reproducibility (RSDwR) by spiking of mixed pesticides standards at 100 µg·kg−1 recorded anRSD of less than 20%. The matrix effect was acceptable and no significant variation was observed in both the matrices except for few pesticides. The estimated measurement uncertainty found acceptable for all the pesticides. This method found suitable for analysis of vegetable samples drawn from market and farm gates.

Sign in / Sign up

Export Citation Format

Share Document