scholarly journals An Analytical Technique, Based on Natural Transform to Solve Fractional-Order Parabolic Equations

Entropy ◽  
2021 ◽  
Vol 23 (8) ◽  
pp. 1086
Author(s):  
Ravi P. Agarwal ◽  
Fatemah Mofarreh ◽  
Rasool Shah ◽  
Waewta Luangboon ◽  
Kamsing Nonlaopon
Keyword(s):  
Closed Form ◽  
Fractional Order ◽  
Parabolic Equations ◽  
Closed Form Solution ◽  
Adomian Decomposition Method ◽  
Form Solution ◽  
Order Problem ◽  
Analytical Technique ◽  
Closed Form Solutions ◽  
Adomian Decomposition

This research article is dedicated to solving fractional-order parabolic equations using an innovative analytical technique. The Adomian decomposition method is well supported by natural transform to establish closed form solutions for targeted problems. The procedure is simple, attractive and is preferred over other methods because it provides a closed form solution for the given problems. The solution graphs are plotted for both integer and fractional-order, which shows that the obtained results are in good contact with the exact solution of the problems. It is also observed that the solution of fractional-order problems are convergent to the solution of integer-order problem. In conclusion, the current technique is an accurate and straightforward approximate method that can be applied to solve other fractional-order partial differential equations.

scholarly journals Numerical Analysis of Fractional-Order Parabolic Equations via Elzaki Transform

2021 ◽  
Vol 2021 ◽  
pp. 1-10
Author(s):  
Muhammad Naeem ◽  
Omar Fouad Azhar ◽  
Ahmed M. Zidan ◽  
Kamsing Nonlaopon ◽  
Rasool Shah
Keyword(s):  
Closed Form ◽  
Fractional Order ◽  
Parabolic Equations ◽  
Closed Form Solution ◽  
Adomian Decomposition Method ◽  
Order Problem ◽  
Suggested Approach ◽  
Analytical Technique ◽  
Adomian Decomposition ◽  
The Given

This research article is dedicated to solving fractional-order parabolic equations, using an innovative analytical technique. The Adomian decomposition method is well supported by Elzaki transformation to establish closed-form solutions for targeted problems. The procedure is simple, attractive, and preferred over other methods because it provides a closed-form solution for the given problems. The solution graphs are plotted for both integer and fractional-order, which shows that the obtained results are in good contact with problems’ exact solution. It is also observed that the solution of fractional-order problems is convergent to the integer-order problem. Moreover, the validity of the proposed method is analyzed by considering some numerical examples. The theory of the suggested approach is fully supported by the obtained results for the given problems. In conclusion, the present method is a straightforward and accurate analytical technique that can solve other fractional-order partial differential equations.

scholarly journals Use of a Strongly Nonlinear Gambier Equation for the Construction of Exact Closed Form Solutions of Nonlinear ODEs

2007 ◽  
Vol 2007 ◽  
pp. 1-25
Author(s):  
M. P. Markakis
Keyword(s):  
Closed Form ◽  
Initial Conditions ◽  
Closed Form Solution ◽  
Form Solution ◽  
Nonlinear Odes ◽  
Analytical Technique ◽  
Closed Form Solutions ◽  
Strongly Nonlinear ◽  
Parameter Values

We establish an analytical method leading to a more general form of the exact solution of a nonlinear ODE of the second order due to Gambier. The treatment is based on the introduction and determination of a new function, by means of which the solution of the original equation is expressed. This treatment is applied to another nonlinear equation, subjected to the same general class as that of Gambier, by constructing step by step an appropriate analytical technique. The developed procedure yields a general exact closed form solution of this equation, valid for specific values of the parameters involved and containing two arbitrary (free) parameters evaluated by the relevant initial conditions. We finally verify this technique by applying it to two specific sets of parameter values of the equation under consideration.

scholarly journals Analytical Solutions of (2+Time Fractional Order) Dimensional Physical Models, Using Modified Decomposition Method

2019 ◽  
Vol 10 (1) ◽  
pp. 122 ◽  
Author(s):  
Hassan Khan ◽  
Umar Farooq ◽  
Rasool Shah ◽  
Dumitru Baleanu ◽  
Poom Kumam ◽  
...  
Keyword(s):  
Fractional Order ◽  
Decomposition Method ◽  
Adomian Decomposition Method ◽  
Analytical Techniques ◽  
Form Solution ◽  
Physical Models ◽  
Fractional Partial Differential Equations ◽  
Analytical Technique ◽  
Adomian Decomposition ◽  
Closed Contact

In this article, a new analytical technique based on an innovative transformation is used to solve (2+time fractional-order) dimensional physical models. The proposed method is the hybrid methodology of Shehu transformation along with Adomian decomposition method. The series form solution is obtained by using the suggested method which provides the desired rate of convergence. Some numerical examples are solved by using the proposed method. The solutions of the targeted problems are represented by graphs which have confirmed closed contact between the exact and obtained solutions of the problems. Based on the novelty and straightforward implementation of the method, it is considered to be one of the best analytical techniques to solve linear and non-linear fractional partial differential equations.

Validation of Nitinol SMA Characteristics Using Finite Element Analysis and Closed Form Solutions

2013 ◽  
Vol 856 ◽  
pp. 147-152
Author(s):  
S.H. Adarsh ◽  
U.S. Mallikarjun
Keyword(s):  
Experimental Data ◽  
Finite Element Analysis ◽  
Finite Element ◽  
Closed Form ◽  
Closed Form Solution ◽  
Form Solution ◽  
Fe Analysis ◽  
Element Analysis ◽  
Complex Behaviour ◽  
Closed Form Solutions

Shape Memory Alloys (SMA) are promising materials for actuation in space applications, because of the relatively large deformations and forces that they offer. However, their complex behaviour and interaction of several physical domains (electrical, thermal and mechanical), the study of SMA behaviour is a challenging field. Present work aims at correlating the Finite Element (FE) analysis of SMA with closed form solutions and experimental data. Though sufficient literature is available on closed form solution of SMA, not much detail is available on the Finite element Analysis. In the present work an attempt is made for characterization of SMA through solving the governing equations by established closed form solution, and finally correlating FE results with these data. Extensive experiments were conducted on 0.3mm diameter NiTinol SMA wire at various temperatures and stress conditions and these results were compared with FE analysis conducted using MSC.Marc. A comparison of results from finite element analysis with the experimental data exhibits fairly good agreement.

scholarly journals Reconstruction of three-dimensional maps based on closed-form solutions of the variational problem of multisensor data registration

2019 ◽  
Vol 484 (6) ◽  
pp. 672-677
Author(s):  
A. V. Vokhmintcev ◽  
A. V. Melnikov ◽  
K. V. Mironov ◽  
V. V. Burlutskiy
Keyword(s):  
Closed Form ◽  
Large Scale ◽  
Three Dimensional ◽  
Dynamic Environment ◽  
Closed Form Solution ◽  
Point Clouds ◽  
Accurate Method ◽  
Form Solution ◽  
Closed Form Solutions ◽  
Reconstruction Methods

A closed-form solution is proposed for the problem of minimizing a functional consisting of two terms measuring mean-square distances for visually associated characteristic points on an image and meansquare distances for point clouds in terms of a point-to-plane metric. An accurate method for reconstructing three-dimensional dynamic environment is presented, and the properties of closed-form solutions are described. The proposed approach improves the accuracy and convergence of reconstruction methods for complex and large-scale scenes.

scholarly journals A New Closed-Form Solution of the Side Abutment Pressure Distribution of Roadway

2018 ◽  
Vol 2018 ◽  
pp. 1-10 ◽  
Author(s):  
Liang Cheng ◽  
Yidong Zhang
Keyword(s):  
Plastic Zone ◽  
Pressure Distribution ◽  
Closed Form ◽  
Abutment Pressure ◽  
Closed Form Solution ◽  
Evaluation Process ◽  
Friction Angle ◽  
Form Solution ◽  
Closed Form Solutions ◽  
Roadway Stability

Instability of coal wall is one of the hot-button and difficult issues in the study of coal mine ground control. The shallow side coal of roadway in the coal measures is usually weak and consequently easy to bring about failure. Hence, the side abutment pressure redistributes and dramatically influences the roadway stability. Since the previous closed-form solutions of the side abutment pressure do not take into account all the necessary parameters which include the properties of the coal and the interface between coal and roof/floor, the roadway height, and the support strength, a mechanical model is established based on the equilibrium of the plastic zone, and a new closed-form solution is derived in this paper. Moreover, a numerical investigation is conducted to validate the accuracy of the closed-form solution. The numerical results of the side abutment pressure distribution are in good agreement with the closed-form solution. Afterwards, a parametric analysis of the width of the plastic zone is carried out, and the results show that the width of the plastic zone is nearly negatively linearly correlated with the friction angle and the cohesion of the coal, the interfacial cohesion, and the support strength. By contrast, it is positively linearly correlated with the roadway height and negatively exponentially correlated with the interfacial friction angle. The results obtained in the present study could be useful for the evaluation process of roadway stability.

scholarly journals An Efficient Analytical Technique, for The Solution of Fractional-Order Telegraph Equations

Mathematics ◽  
2019 ◽  
Vol 7 (5) ◽  
pp. 426 ◽  
Author(s):  
Hassan Khan ◽  
Rasool Shah ◽  
Poom Kumam ◽  
Dumitru Baleanu ◽  
Muhammad Arif
Keyword(s):  
Fractional Order ◽  
Decomposition Method ◽  
Adomian Decomposition Method ◽  
Analytical Techniques ◽  
Telegraph Equation ◽  
High Rate ◽  
Analytical Technique ◽  
Decomposition Procedure ◽  
Adomian Decomposition ◽  
Telegraph Equations

In the present article, fractional-order telegraph equations are solved by using the Laplace-Adomian decomposition method. The Caputo operator is used to define the fractional derivative. Series form solutions are obtained for fractional-order telegraph equations by using the proposed method. Some numerical examples are presented to understand the procedure of the Laplace-Adomian decomposition method. As the Laplace-Adomian decomposition procedure has shown the least volume of calculations and high rate of convergence compared to other analytical techniques, the Laplace-Adomian decomposition method is considered to be one of the best analytical techniques for solving fractional-order, non-linear partial differential equations—particularly the fractional-order telegraph equation.

Use of Resultants and the Bernshtein Formula in the Dimensional Synthesis of Linkage Components

1994 ◽  
Vol 116 (4) ◽  
pp. 1171-1172 ◽  
Author(s):  
Chuen-Sen Lin ◽  
Bao-Ping Jia
Keyword(s):  
Closed Form ◽  
Closed Form Solution ◽  
Form Solution ◽  
Polynomial Equations ◽  
Dimensional Synthesis ◽  
Fourth Degree ◽  
Finite Precision ◽  
Closed Form Solutions ◽  
System Of Polynomial Equations ◽  
Resultant Theory

The applications of resultants and the Bernshtein formula for the dimensional synthesis of linkage components for finite precision positions are discussed. The closed-form solutions, which are derived from systems of polynomials in multiple unknowns by applying resultant theory, are in forms of polynomial equations of a single unknown. For the case of two compatibility equations, the closed form solution is a sixth degree solution polynomial. For the case of three compatibility equations, the solution is a fifty-fourth degree solution polynomial. For each case, the Bernshtein formula is applied to calculate the number of solutions of the system of polynomial equations. The calculated numbers of solutions match the degrees of the solution polynomials for both cases.

scholarly journals Comparison of closed-form solutions to experimental magnetic force between two cylindrical magnets

2021 ◽  
pp. 141-146
Author(s):  
Sampart Cheedket ◽  
Chitnarong Sirisathitkul
Keyword(s):  
Magnetic Field ◽  
Closed Form ◽  
Magnetic Force ◽  
Permanent Magnets ◽  
Magnetic Levitation ◽  
Closed Form Solution ◽  
Vertical Tube ◽  
Form Solution ◽  
Closed Form Solutions ◽  
Set Up

The force between permanent magnets implemented in many engineering devices remains an intriguing problem in basic physics. The variation of magnetic force with the distance x between a pair of magnets cannot usually be approximated as x-4 because of the dipole nature and geometry of magnets. In this work, the force between two identical cylindrical magnets is accurately described by a closed-form solution. The analytical model assumes that the magnets are uniformly magnetized along their length. The calculation, based on the magnetic field exerted by one magnet on the other along the direction of their orientation, shows a reduction in the magnetic force with the distance x and a dependence on the size parameters of magnets. To verify the equation, the experiment was set up by placing two cylindrical neodymium iron boron type magnets in a vertical tube. The repulsive force between the identical upper and lower magnets of 2.5 cm in diameter and 7.5 cm in length was measured from the weight on the top of the upper magnet. The resulting separation between the magnets was recorded as x. The forces measured at x=0.004-0.037 m differ from the values calculated using the analytic solution by -0.55 % to -13.60 %. The calculation also gives rise to a practical remnant magnetic field of 1.206 T. When x is much large than the equation of force is approximated as a simple form proportional to 1/x-4. The finding can be directly used in magnetic levitation as well as applied in calculating magnetic fields and forces in other systems incorporating permanent magnets.

scholarly journals Axisymmetric Large Deflection Elastic Analysis of Hollow Annular Membranes under Transverse Uniform Loading

Symmetry ◽  
2021 ◽  
Vol 13 (10) ◽  
pp. 1770
Author(s):  
Jun-Yi Sun ◽  
Qi Zhang ◽  
Xue Li ◽  
Xiao-Ting He
Keyword(s):  
Closed Form ◽  
Circular Plate ◽  
Large Deflection ◽  
Closed Form Solution ◽  
Circular Ring ◽  
Form Solution ◽  
Elastic Response ◽  
Geometrically Nonlinear ◽  
Closed Form Solutions ◽  
Annular Membrane

The anticipated use of a hollow linearly elastic annular membrane for designing elastic shells has provided an impetus for this paper to investigate the large deflection geometrically nonlinear phenomena of such a hollow linearly elastic annular membrane under transverse uniform loads. The so-called hollow annular membranes differ from the traditional annular membranes available in the literature only in that the former has the inner edge attached to a movable but weightless rigid concentric circular ring while the latter has the inner edge attached to a movable but weightless rigid concentric circular plate. The hollow annular membranes remove the transverse uniform loads distributed on “circular plate” due to the use of “circular ring” and result in a reduction in elastic response. In this paper, the large deflection geometrically nonlinear problem of an initially flat, peripherally fixed, linearly elastic, transversely uniformly loaded hollow annular membrane is formulated, the problem formulated is solved by using power series method, and its closed-form solution is presented for the first time. The convergence and effectiveness of the closed-form solution presented are investigated numerically. A comparison between closed-form solutions for hollow and traditional annular membranes under the same conditions is conducted, to reveal the difference in elastic response, as well as the influence of different closed-form solutions on the anticipated use for designing elastic shells.

Sign in / Sign up

Export Citation Format

Share Document