scholarly journals Performance Entitlement by Using Novel High Strength Electrical Steels and Copper Alloys for High-Speed Laminated Rotor Induction Machines

Electronics ◽  
2022 ◽  
Vol 11 (2) ◽  
pp. 210
Author(s):  
Fengyu Zhang ◽  
David Gerada ◽  
Zeyuan Xu ◽  
Yuling He ◽  
He Zhang ◽  
...  
Keyword(s):  
Rare Earth ◽  
High Speed ◽  
Copper Alloys ◽  
Induction Machine ◽  
High Strength ◽  
Induction Machines ◽  
Electrical Steels ◽  
Application Range ◽  
Recent Developments ◽  
Free Induction

The laminated rotor Induction Machine (IM), with its simple construction and manufacturing, robustness, ease of control and comparatively lower cost remains by far the most utilized electromechanical energy converter. At very high speeds, traditionally its use is considered to be limited to the previously established operational limits of 2.5 × 105 rpm√kW, beyond which the surface Permanent Magnet (PM) Machine and the solid rotor Induction Machine become the machines available for consideration. The aforesaid limits are derived from the use of classic materials. This paper reviews the recent developments in electrical steels and copper alloys and translates these into the resulting performance entitlement and operational limits through a case study involving a marine application, for which an existing rare-earth PM machine is in use. It is concluded that with novel materials, laminated rotor induction machines can be operated up to 6 × 105 rpm√kW, thus opening the use of the rare-earth free Induction Machine for a wider application range previously limited to PM machines.

Recent developments in rare-earth free wrought magnesium alloys having high strength: A review

2016 ◽  
Vol 663 ◽  
pp. 321-331 ◽  
Author(s):  
Hucheng Pan ◽  
Yuping Ren ◽  
He Fu ◽  
Hong Zhao ◽  
Liqing Wang ◽  
...  
Keyword(s):  
Rare Earth ◽  
Magnesium Alloys ◽  
High Strength ◽  
Recent Developments

Powder Compaction: Fundamentals and Recent Developments

1982 ◽  
Vol 196 (1) ◽  
pp. 105-121 ◽  
Author(s):  
Hellmut F Fischmeister
Keyword(s):  
High Speed ◽  
Hot Isostatic Pressing ◽  
High Speed Steel ◽  
High Strength ◽  
Aircraft Engine ◽  
Powder Compaction ◽  
Cold Forging ◽  
Isostatic Pressing ◽  
Recent Developments ◽  
Powder Lubrication

The lecture reviews processes and mechanisms of powder compaction in dies, by cold or hot isostatic pressing, and by various other methods. The review will also include the hot and cold forging of powder preforms. Key problems of the main processes will be discussed, such as mass flow in the powder bed during compaction, which is required to achieve homogeneous density distribution in a part, or the role of powder lubrication. Applications of powder compaction are described using examples from such areas as the manufacture of sintered machine parts, high-strength automotive parts made by powder forging, the fabrication of mill shapes from powder (e.g., high speed steel or stainless steel tubing), and the production of aircraft engine parts by hot isostatic pressing.

scholarly journals Challenges of the Optimization of a High-Speed Induction Machine for Naval Applications

Energies ◽  
2019 ◽  
Vol 12 (12) ◽  
pp. 2431 ◽  
Author(s):  
Giampaolo Buticchi ◽  
David Gerada ◽  
Luigi Alberti ◽  
Michael Galea ◽  
Pat Wheeler ◽  
...  
Keyword(s):  
Permanent Magnet ◽  
High Speed ◽  
Induction Machine ◽  
Induction Machines ◽  
System Level ◽  
Permanent Magnet Synchronous Machines ◽  
Industrial Sectors ◽  
Higher Power ◽  
Future Challenges ◽  
Flux Weakening

In several industrial sectors, induction machines are being replaced with permanent magnet based alternatives, owing to the potential for higher power density and efficiency. However, high-speed applications feature a wide flux-weakening region, where advanced induction machines could bring benefits in terms of system-level optimization. This paper gives an overview the technological challenges for high-speed drives with induction machines, materials, simulations and future challenges for the power electronics in these applications. The target application is a high-speed induction machine for a naval turbocharging system. The comparison with permanent magnet synchronous machines will demonstrate how the extended flux weakening operation effectively allows for a weight reduction of the overall system.

ELEKTRON EQ2

Alloy Digest ◽  
2015 ◽  
Vol 64 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Rare Earth ◽  
High Temperature ◽  
Magnesium Alloy ◽  
North America ◽  
Earth Element ◽  
High Strength ◽  
Heat Treating ◽  
Bend Strength ◽  
Temperature Performance

Abstract Elektron EQ21 is a casting high strength magnesium alloy developed as a heat treatable alloy with rare earth element additions. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive, shear, and bend strength as well as creep. It also includes information on high temperature performance and corrosion resistance as well as casting, forming, heat treating, machining, joining, and surface treatment. Filing Code: Mg-80. Producer or source: Magnesium Elektron Wrought Products, North America.

CYCLOPS BHT

Alloy Digest ◽  
1965 ◽  
Vol 14 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
Elevated Temperature ◽  
High Speed ◽  
High Speed Steel ◽  
High Strength ◽  
Heat Treating ◽  
High Load ◽  
Structural Components ◽  
Temperature Performance

Abstract Cyclops BHT is a low-alloy martensitic high-speed steel of the molybdenum type recommended for high strength, high load structural components designed for elevated temperature service. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on high temperature performance and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SA-173. Producer or source: Cyclops Corporation.

VASCO M-50

Alloy Digest ◽  
1974 ◽  
Vol 23 (11) ◽  
Keyword(s):  
Elevated Temperature ◽  
Physical Properties ◽  
Surface Treatment ◽  
High Speed ◽  
High Speed Steel ◽  
High Strength ◽  
Heat Treating ◽  
High Load ◽  
Aisi 52100 ◽  
Aisi 52100 Steel

Abstract VASCO M-50 is a hardenable (martensitic), low-alloy high-speed steel developed primarily for high-strength, high-load components (such as bearings and gears) designed for elevated-temperature service. It may be used at temperatures up to 600 F; this is in contrast to AISI 52100 steel which may be used up to only 350 F. This datasheet provides information on composition, physical properties, hardness, and elasticity. It also includes information on forming, heat treating, machining, joining, and surface treatment. Filing Code: TS-278. Producer or source: Teledyne Vasco.

Application of Advanced Electrochemical Methods with Nanomaterial-based Electrodes as Powerful Tools for Trace Analysis of Drugs and Toxic Compounds

2019 ◽  
Vol 15 (2) ◽  
pp. 143-151 ◽  
Author(s):  
Parviz Norouzi ◽  
Bagher Larijani ◽  
Taher Alizadeh ◽  
Eslam Pourbasheer ◽  
Mostafa Aghazadeh ◽  
...  
Keyword(s):  
Trace Analysis ◽  
High Speed ◽  
Portable Devices ◽  
Great Opportunity ◽  
Toxic Compounds ◽  
High Speed Analysis ◽  
Recent Developments ◽  
Sensitivity And Selectivity ◽  
Trace Measurement ◽  
Health Application

Background: The new progress in electronic devices has provided a great opportunity for advancing electrochemical instruments by which we can more easily solve many problems of interest for trace analysis of compounds, with a high degree of accuracy, precision, sensitivity, and selectivity. On the other hand, in recent years, there is a significant growth in the application of nanomaterials for the construction of nanosensors due to enhanced chemical and physical properties arising from discrete modified nanomaterial-based electrodes or microelectrodes. Objective: Combination of the advanced electrochemical system and nanosensors make these devices very suitable for the high-speed analysis, as motioning and portable devices. This review will discuss the recent developments and achievements that have been reported for trace measurement of drugs and toxic compounds for environment, food and health application.

Research on High-Speed Cutting of Cr12MoV Hardened Steel - A Review

2020 ◽  
Vol 15 ◽  
Author(s):  
Fei Sun ◽  
Guohe Li ◽  
Qi Zhang ◽  
Meng Liu
Keyword(s):  
High Speed ◽  
Cutting Temperature ◽  
High Hardness ◽  
High Strength ◽  
Hardened Steel ◽  
Parameters Optimization ◽  
Future Research ◽  
High Speed Machining ◽  
Machined Surface ◽  
Stamping Die

: Cr12MoV hardened steel is widely used in the manufacturing of stamping die because of its high strength, high hardness, and good wear resistance. As a kind of mainstream cutting technology, high-speed machining has been applied in the machining of Cr12MoV hardened steel. Based on the review of a large number of literature, the development of high-speed machining of Cr12MoV hardened steel was summarized, including the research status of the saw-tooth chip, cutting force, cutting temperature, tool wear, machined surface quality, and parameters optimization. The problems that exist in the current research were discussed and the directions of future research were pointed out. It can promote the development of high-speed machining of Cr12MoV hardened steel.

Sign in / Sign up

Export Citation Format

Share Document