scholarly journals High Speed Back-Bias Voltage (VBB) Generator with Improved Pumping Current

Electronics ◽  
2020 ◽  
Vol 9 (11) ◽  
pp. 1835 ◽  
Author(s):  
Taegun Yim ◽  
Choongkeun Lee ◽  
Hongil Yoon
Keyword(s):  
Metal Oxide ◽  
Bias Voltage ◽  
Integrated Circuit ◽  
High Speed ◽  
High Performance ◽  
Supply Voltage ◽  
Metal Oxide Semiconductor ◽  
Oxide Semiconductor ◽  
Process Technology ◽  
Negative Voltage

Due to the advance of dynamic random access memory (DRAM) technologies with the steadfast increase of density with aggressively scaled storage capacitors, the supply voltage has been lowered to under 1 V to reduce power consumption. The above progress has been accompanied by the increasingly difficult task of sensing cell data reliably. One of the essential methods to preserve sustainable data retention characteristic is to curtail the sub-threshold leakage current by using a negative voltage bias for the bulk of access transistors. This negative back-bias is generated by a back-bias voltage generator. This paper proposes a novel high-speed back-bias voltage (VBB) generator with a cross-coupled hybrid pumping scheme. The conventional circuit uses one fixed voltage to control the gates of discharge of the p-channel metal oxide semiconductor (PMOS) and transfer n-channel metal oxide semiconductor (NMOS), respectively. However, the proposed circuit adds an auxiliary pump, thereby able to control more aptly with a lower negative voltage when discharging and a higher positive voltage when transferring. As a result, the proposed circuit achieves a faster pump-down speed and higher pumping current at a lower supply voltage compared to conventional circuits. The H-simulation program with integrated circuit emphasis (HSPICE) simulation results with the Taiwan semiconductor manufacturing company (TSMC) 0.18 um process technology indicates that the proposed circuit has about a 20% faster pump-down speed at a supply voltage of voltage common collector (VCC) = 1.2 V and about 3% higher pumping current at VBB from −0.6 V to −1 V with the ability to generate a near 3% higher ratio of |VBB|/VCC at VCC = 0.6 V compared to conventional circuits. Hence, the proposed circuit is extremely suitable and promising for future low-power and high-performance DRAM applications.

The Effect of Strain on the Formation of Dislocations at the SiGe/Si Interface

MRS Bulletin ◽  
1996 ◽  
Vol 21 (4) ◽  
pp. 38-44 ◽  
Author(s):  
F.K. LeGoues
Keyword(s):  
Metal Oxide ◽  
High Speed ◽  
High Performance ◽  
Field Effect Transistors ◽  
Low Cost ◽  
Complementary Metal Oxide Semiconductor ◽  
Metal Oxide Semiconductor ◽  
Oxide Semiconductor ◽  
Design Rule ◽  
Strained Si

Recently much interest has been devoted to Si-based heteroepitaxy, and in particular, to the SiGe/Si system. This is mostly for economical reasons: Si-based technology is much more advanced, is widely available, and is cheaper than GaAs-based technology. SiGe opens the door to the exciting (and lucrative) area of Si-based high-performance devices, although optical applications are still limited to GaAs-based technology. Strained SiGe layers form the base of heterojunction bipolar transistors (HBTs), which are currently used in commercial high-speed analogue applications. They promise to be low-cost compared to their GaAs counterparts and give comparable performance in the 2-20-GHz regime. More recently we have started to investigate the use of relaxed SiGe layers, which opens the door to a wider range of application and to the use of SiGe in complementary metal oxide semiconductor (CMOS) devices, which comprise strained Si and SiGe layers. Some recent successes include record-breaking low-temperature electron mobility in modulation-doped layers where the mobility was found to be up to 50 times better than standard Si-based metal-oxide-semiconductor field-effect transistors (MOSFETs). Even more recently, SiGe-basedp-type MOSFETS were built with oscillation frequency of up to 50 GHz, which is a new record, in anyp-type material for the same design rule.

scholarly journals Comparative Study ofSiO2,Al2O3, and BeO Ultrathin Interfacial Barrier Layers in Si Metal-Oxide-Semiconductor Devices

2012 ◽  
Vol 2012 ◽  
pp. 1-7 ◽  
Author(s):  
J. H. Yum ◽  
J. Oh ◽  
Todd. W. Hudnall ◽  
C. W. Bielawski ◽  
G. Bersuker ◽  
...  
Keyword(s):  
Metal Oxide ◽  
High Performance ◽  
Field Effect Transistors ◽  
Beryllium Oxide ◽  
Atomic Layer ◽  
Oxide Thickness ◽  
Metal Oxide Semiconductor ◽  
Oxide Semiconductor ◽  
Flat Band ◽  
Effective Electron

In a previous study, we have demonstrated that beryllium oxide (BeO) film grown by atomic layer deposition (ALD) on Si and III-V MOS devices has excellent electrical and physical characteristics. In this paper, we compare the electrical characteristics of inserting an ultrathin interfacial barrier layer such as SiO2, Al2O3, or BeO between the HfO2gate dielectric and Si substrate in metal oxide semiconductor capacitors (MOSCAPs) and n-channel inversion type metal oxide semiconductor field effect transistors (MOSFETs). Si MOSCAPs and MOSFETs with a BeO/HfO2gate stack exhibited high performance and reliability characteristics, including a 34% improvement in drive current, slightly better reduction in subthreshold swing, 42% increase in effective electron mobility at an electric field of 1 MV/cm, slightly low equivalent oxide thickness, less stress-induced flat-band voltage shift, less stress induced leakage current, and less interface charge.

Characterization of High-Performance Polycrystalline Silicon Complementary Metal–Oxide–Semiconductor Circuits

2007 ◽  
Vol 46 (1) ◽  
pp. 51-55 ◽  
Author(s):  
Genshiro Kawachi ◽  
Yoshiaki Nakazaki ◽  
Hiroyuki Ogawa ◽  
Masayuki Jyumonji ◽  
Noritaka Akita ◽  
...  
Keyword(s):  
Metal Oxide ◽  
Polycrystalline Silicon ◽  
High Performance ◽  
Complementary Metal Oxide Semiconductor ◽  
Metal Oxide Semiconductor ◽  
Oxide Semiconductor ◽  
Semiconductor Circuits

scholarly journals Effects of Process Variations in a HCMOS IC using a Monte Carlo SPICE Simulation

2017 ◽  
pp. 11-16
Author(s):  
Widianto Widianto ◽  
Lailis Syafaah ◽  
Nurhadi Nurhadi
Keyword(s):  
Monte Carlo ◽  
Integrated Circuit ◽  
High Speed ◽  
Evaluation Method ◽  
Complementary Metal Oxide Semiconductor ◽  
Process Variations ◽  
Metal Oxide Semiconductor ◽  
Oxide Semiconductor ◽  
Spice Simulation ◽  
Simulation Results

In this paper, effects of process variations in a HCMOS (High-Speed Complementary Metal Oxide Semiconductor) IC (Integrated Circuit) are examined using a Monte Carlo SPICE (Simulation Program with Integrated Circuit Emphasis) simulation. The variations of the IC are L and VTO variations. An evaluation method is used to evaluate the effects of the variations by modeling it using a normal (Gaussian) distribution. The simulation results show that the IC may be detected as a defective IC caused by the variations based on large supply currents flow to it. 

High-resolution electrohydrodynamic inkjet printing of stretchable metal oxide semiconductor transistors with high performance

Nanoscale ◽  
2016 ◽  
Vol 8 (39) ◽  
pp. 17113-17121 ◽  
Author(s):  
S.-Y. Kim ◽  
K. Kim ◽  
Y. H. Hwang ◽  
J. Park ◽  
J. Jang ◽  
...  
Keyword(s):  
High Resolution ◽  
Metal Oxide ◽  
Inkjet Printing ◽  
High Performance ◽  
Metal Oxide Semiconductor ◽  
Oxide Semiconductor

Analysis and Simulation of a Low-Leakage Analog Single Gate and FinFET Circuits

2014 ◽  
Vol 13 (02) ◽  
pp. 1450012 ◽  
Author(s):  
Manorama Chauhan ◽  
Ravindra Singh Kushwah ◽  
Pavan Shrivastava ◽  
Shyam Akashe
Keyword(s):  
Integrated Circuits ◽  
Metal Oxide ◽  
Low Power ◽  
High Performance ◽  
Complementary Metal Oxide Semiconductor ◽  
Metal Oxide Semiconductor ◽  
Oxide Semiconductor ◽  
Short Channel ◽  
State Dependency ◽  
Low Leakage

In the world of Integrated Circuits, complementary metal–oxide–semiconductor (CMOS) has lost its ability during scaling beyond 50 nm. Scaling causes severe short channel effects (SCEs) which are difficult to suppress. FinFET devices undertake to replace usual Metal Oxide Semiconductor Field Effect Transistor (MOSFETs) because of their better ability in controlling leakage and diminishing SCEs while delivering a strong drive current. In this paper, we present a relative examination of FinFET with the double gate MOSFET (DGMOSFET) and conventional bulk Si single gate MOSFET (SGMOSFET) by using Cadence Virtuoso simulation tool. Physics-based numerical two-dimensional simulation results for FinFET device, circuit power is presented, and classifying that FinFET technology is an ideal applicant for low power applications. Exclusive FinFET device features resulting from gate–gate coupling are conversed and efficiently exploited for optimal low leakage device design. Design trade-off for FinFET power and performance are suggested for low power and high performance applications. Whole power consumptions of static and dynamic circuits and latches for FinFET device, believing state dependency, show that leakage currents for FinFET circuits are reduced by a factor of over ~ 10X, compared to DGMOSFET and ~ 20X compared with SGMOSFET.

Sign in / Sign up

Export Citation Format

Share Document