scholarly journals Experimental Study on the Performance of a Crashworthy Device for the Monopile Offshore Wind Turbine against Ship Impact

Energies ◽  
2018 ◽  
Vol 11 (11) ◽  
pp. 3173
Author(s):  
Nianxin Ren ◽  
Wei Li ◽  
Zhe Ma ◽  
Jinping Ou ◽  
Dezhi Ning
Keyword(s):  
Wind Turbine ◽  
Impact Force ◽  
Offshore Wind ◽  
Design Parameters ◽  
Steel Shell ◽  
Offshore Wind Turbine ◽  
Test Model ◽  
Motion Platform ◽  
Thin Steel ◽  
The Impact

In the present work, a crashworthy device for a monopile offshore wind turbine has been proposed, which consists of the inner two-layer rubber torus and the outer thin steel shell. The performance of the crashworthy device against ship impact has been investigated experimentally. Based on the prototype of a 4 MW monopile wind turbine in the East China Sea, the scale ratio of the test model has been designed to be 1/50. The test ship model has been simplified as a “rigid car” equipped with a high-frequency force sensor in the front, which is available for changing the ship mass with different weights. The ship-impact velocity can be accurately controlled by a motion platform driven by a direct current machine. The effect of the key design parameters of the crashworthy device on its anti-impact performance has been tested and compared under typical ship impact cases. The results indicate that the crashworthy device can effectively reduce both the ship impact force and the top nacelle acceleration, and the physical mechanism that has been clarified. The outer thin steel shell can significantly use its structural deformation to absorb the ship impact energy, which is beneficial for reducing the structural damage of the offshore wind turbine (OWT)’s tower. The inner rubber torus can effectively prolong the ship impact duration, which is available for smoothing the impact force. Finally, the porous design for the outer steel shell of the crashworthy device has been proposed and tested.

Model Test and Numerical Analysis of an Offshore Bottom Fixed Pentapod Wind Turbine Under Seismic Loads

2016 ◽  
Author(s):  
Wenhua Wang ◽  
Zhen Gao ◽  
Xin Li ◽  
Torgeir Moan ◽  
Bin Wang
Keyword(s):  
Wind Turbine ◽  
Wind Wave ◽  
Seismic Analysis ◽  
Wind Farms ◽  
Dynamic Responses ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Test Model ◽  
Structural Dynamic ◽  
Load Conditions

In the last decade the wind energy industry has developed rapidly in China, especially offshore. For a water depth less than 20m, monopile and multi-pile substructures (tripod, pentapod) are applied widely in offshore wind farms. Some wind farms in China are located in high seismicity regions, thus, the earthquake load may become the dominant load for offshore wind turbines. This paper deals with the seismic behavior of an offshore wind turbine (OWT) consisting of the NREL 5MW baseline wind turbine, a pentapod substructure and a pile foundation of a real offshore wind turbine in China. A test model of the OWT is designed based on the hydro-elastic similarity. Test cases of different load combinations are performed with the environmental conditions generated by the Joint Earthquake, Wave and Current Simulation System and the Simple Wind Field Generation System at Dalian University of Technology, China, in order to investigate the structural dynamic responses under different load conditions. In the tests, a circular disk is used to model the rotor-nacelle system, and a force gauge is fixed at the center of the disk to measure the wind forces during the tests. A series of accelerometers are arranged along the model tower and the pentapod piles, and strain gauges glued on the substructure members are intended to measure the structural dynamic responses. A finite element model of the complete wind turbine is also established in order to compare the theoretical results with the test data. The hydro-elastic similarity is validated based on the comparison of the measured dynamic characteristics and the results of the prototype modal analysis. The numerical results agree well with the experimental data. Based on the comparisons of the results, the effect of the wind and sea loads on the structural responses subjected to seismic is demonstrated, especially the influence on the global response of the structure. It is seen that the effect of the combined seismic, wind, wave and current load conditions can not be simply superimposed. Hence the interaction effect in the seismic analysis should be considered when the wind, wave and current loads have a non-negligible effect.

A Numerical Prediction on the Transient Response of a Spar-Type Floating Offshore Wind Turbine in Freak Waves

2020 ◽  
Vol 142 (6) ◽  
Author(s):  
Yan Li ◽  
Xiaoqi Qu ◽  
Liqin Liu ◽  
Peng Xie ◽  
Tianchang Yin ◽  
...  
Keyword(s):  
Dynamic Response ◽  
Wind Turbine ◽  
Offshore Wind ◽  
Numerical Code ◽  
Modulation Method ◽  
Offshore Wind Turbine ◽  
Freak Waves ◽  
Freak Wave ◽  
Floating Offshore Wind Turbine ◽  
The Impact

Abstract Simulations are conducted in time domain to investigate the dynamic response of a spar-type floating offshore wind turbine (FOWT) under the freak wave scenarios. Toward this end, a coupled aero-hydro-mooring in-house numerical code is adopted to perform the simulations. The methodology includes a blade-element-momentum (BEM) model for simulating the aerodynamic loads, a nonlinear model for simulating the hydrodynamic loads, a nonlinear restoring model of Spar buoy, and a nonlinear algorithm for simulating the mooring cables. The OC3 Hywind spar-type FOWT is adopted as an example to study the dynamic response under the freak wave conditions, meanwhile the time series of freak waves are generated using the random frequency components selection phase modulation method. The motion of platform, the tension applied on the mooring lines, and the power generation performance are documented in several cases. According to the simulations, it is indicated that when a freak wave acts on the FOWT, the transient motion of the FOWT is induced in all degrees-of-freedom, as well as the produced power decreases rapidly. Furthermore, the impact of freak wave parameters on the motion of FOWT is discussed.

Global Responses and Loads Analysis of a 750-kW Semi-Submersible Floating Offshore Wind Turbine Under Extreme Environmental Conditions

2019 ◽  
Author(s):  
Thanh Dam Pham ◽  
Junbae Kim ◽  
Byoungcheon Seo ◽  
Rupesh Kumar ◽  
Youngjae Yu ◽  
...  
Keyword(s):  
Wind Turbine ◽  
Environmental Conditions ◽  
Dynamic Responses ◽  
Offshore Wind ◽  
East Sea ◽  
Offshore Wind Turbine ◽  
Test Model ◽  
Scaled Model ◽  
Floating Offshore Wind Turbine ◽  
Extreme Loads

Abstract A pilot floating offshore wind turbine project of Korea was proposed for installing in the East Sea of Korea. The prototype is a semisubmersible platform supporting a 750-kW wind turbine. A scaled model was tested in the basin tank of the University of Ulsan at scale ratio 1:40. The 750-kW floating offshore wind turbine was modeled by using the NREL-FAST code. Numerical results were validated by comparing with those of the test model. This paper analyzes dynamic responses and loads of the wind turbine system under extreme environmental conditions. Extreme environmental conditions based on metocean data of East Sea Korea. Extreme responses and extreme loads are important data for designing the structure of the 750 kW semi-submersible floating offshore wind turbine.

Parametric Study of Catenary Mooring System for a Semisubmersible Floating Wind Turbine in Intermediate Water Depth

2020 ◽  
Author(s):  
Jiawen Li ◽  
Qiang Zhang ◽  
Jiali Du ◽  
Yichen Jiang
Keyword(s):  
Wind Turbine ◽  
Water Depth ◽  
Offshore Wind ◽  
Design Parameters ◽  
Mooring Line ◽  
Offshore Wind Turbine ◽  
Reference Structure ◽  
Intermediate Water ◽  
Mooring System ◽  
Floating Wind Turbine

Abstract This paper presents a parametric design study of the mooring system for a floating offshore wind turbine. We selected the OC4 DeepCwind semisubmersible floating wind turbine as the reference structure. The design water depth was 50 m, which was the transition area between the shallow and deep waters. For the floating wind turbine working in this water area, the restoring forces and moments provided by the mooring lines were significantly affected by the heave motion amplitude of the platform. Thus, the mooring design for the wind turbine in this working depth was different from the deep-water catenary mooring system. In this study, the chosen design parameters were declination angle, fairlead position, mooring line length, environmental load direction, and mooring line number. We conducted fully coupled aero-hydro dynamic simulations of the floating wind turbine system in the time domain to investigate the influences of different mooring configurations on the platform motion and the mooring tension. We evaluated both survival and accidental conditions to analyze the mooring safety under typhoon and mooring fail conditions. On the basis of the simulation results, this study made several design recommendations for the mooring configuration for floating wind turbines in intermediate water depth applied in China.

Design Requirements for Floating Offshore Wind Turbines

2013 ◽  
Author(s):  
Xiaohong Chen ◽  
Qing Yu
Keyword(s):  
Wind Turbine ◽  
Case Studies ◽  
Wind Turbines ◽  
Offshore Wind ◽  
Design Parameters ◽  
Offshore Wind Turbine ◽  
Support Structure ◽  
Offshore Wind Turbines ◽  
Floating Offshore Wind Turbines ◽  
Design Requirements

This paper presents the research in support of the development of design requirements for floating offshore wind turbines (FOWTs). An overview of technical challenges in the design of FOWTs is discussed, followed by a summary of the case studies using representative FOWT concepts. Three design concepts, including a Spar-type, a TLP-type and a Semisubmersible-type floating support structure carrying a 5-MW offshore wind turbine, are selected for the case studies. Both operational and extreme storm conditions on the US Outer Continental Shelf (OCS) are considered. A state-of-the-art simulation technique is employed to perform fully coupled aero-hydro-servo-elastic analysis using the integrated FOWT model. This technique can take into account dynamic interactions among the turbine Rotor-Nacelle Assembly (RNA), turbine control system, floating support structure and stationkeeping system. The relative importance of various design parameters and their impact on the development of design criteria are evaluated through parametric analyses. The paper also introduces the design requirements put forward in the recently published ABS Guide for Building and Classing Floating Offshore Wind Turbine Installations (ABS, 2013).

scholarly journals Effect of Wind Turbulence on Extreme Load Analysis of an Offshore Wind Turbine

2019 ◽  
Author(s):  
Xiaolu Chen ◽  
Zhiyu Jiang ◽  
Qinyuan Li ◽  
Ye Li
Keyword(s):  
Wind Turbine ◽  
Turbulence Intensity ◽  
Environmental Conditions ◽  
Dynamic Responses ◽  
Offshore Wind ◽  
Contour Method ◽  
Offshore Wind Turbine ◽  
Extreme Response ◽  
Wind Turbulence ◽  
The Impact

Abstract Evaluation of dynamic responses under extreme environmental conditions is important for the structural design of offshore wind turbines. Previously, a modified environmental contour method has been proposed to estimate extreme responses. In the method, the joint distribution of environmental variables near the cut-out wind speed is used to derive the critical environmental conditions for a specified return period, and the turbulence intensity (TI) of wind is assumed to be a deterministic value. To address more realistic wind conditions, this paper considers the turbulence intensity as a stochastic variable and investigates the impact on the modified environmental contour. Aerodynamic simulations are run over a range of mean wind speeds at the hub height from 9–25 m/s and turbulence levels between 9%–15%. Dynamic responses of a monopile offshore wind turbine under extreme conditions were studied, and the importance of considering the uncertainties associated with wind turbulence is highlighted. A case of evaluating the extreme response for 50-year environmental contour is given as an example of including TI as an extra variant in environmental contour method. The result is compared with traditional method in which TI is set as a constant of 15%. It shows that taking TI into consideration based on probabilistic method produces a lower extreme response prediction.

scholarly journals EXPERIMENTAL STUDY ON THE LOADING AND SCOUR OF THE JACKET TYPE OFFSHORE WIND TURBINE FOUNDATION

2011 ◽  
Vol 1 (32) ◽  
pp. 25
Author(s):  
Ray-Yeng Yang ◽  
Hsin-Hung Chen ◽  
Hwung-Hweng Hwung ◽  
Wen-Pin Jiang ◽  
Nian-Tzu Wu
Keyword(s):  
Wind Turbine ◽  
Water Depth ◽  
Fixed Bed ◽  
Offshore Wind ◽  
Scale Model ◽  
Offshore Wind Turbine ◽  
Wave Flume ◽  
Wave Basin ◽  
Scour Protection ◽  
The Impact

A 1:36 scale model tests were carried out in the Medium Wave Flume (MWF) and Near-shore Wave Basin (NSWB) at the Tainan Hydraulics Laboratory (THL) with the jacket type offshore wind turbine foundation located in the test area. The loading of typhoon wave with current on the jacket type offshore wind turbine foundation was investigated in the MWF with fixed bed experiment. Meanwhile, the scour around the jacket type offshore wind turbine foundation exposed to wave and current was conducted in the NSWB with the moveable bed experiment. Two locations (water depth 12m and 16m) of the foundations are separately simulated in this study. Based on the analysis from the former NSWB experimental results, the suitable scour protection of a four-layer work around the foundation is also proposed to the impact of scour. Finally, a four-layer scour protection is tested and found to be effective in preventing scour around jacket type foundation of offshore wind turbines at water depth 12m and 16m.

Assessing the Impact of Integrating Energy Storage on the Dynamic Response of a Spar-Type Floating Wind Turbine

2019 ◽  
Author(s):  
Charise Cutajar ◽  
Tonio Sant ◽  
Robert N. Farrugia ◽  
Daniel Buhagiar
Keyword(s):  
Energy Storage ◽  
Dynamic Response ◽  
Wind Turbine ◽  
Energy Demand ◽  
Large Scale ◽  
Preliminary Investigation ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Floating Wind Turbine ◽  
The Impact

Abstract Offshore wind technology is at the forefront of exploiting renewable energy at sea. The latest innovations in the field comprise floating wind turbines deployed in deep waters that are capable of intercepting the stronger, less turbulent winds farther away from the landmass. Despite being able to augment the power harnessed, wind resources remain intermittent in nature, and so unable to satisfy the energy demand at all times. Energy storage systems (ESS) are therefore being considered a key component to smoothen out the supply-demand mismatch when wind penetration into electricity grids increases. Yet, multiple issues pertaining to the integration of ESSs on large-scale projects arise, including economic, environmental and safety considerations. This paper presents a novel concept for integrating a hydro-pneumatic energy storage (HPES) system within a spar-type floating offshore wind turbine (FOWT) platform. It aims to assess the technical feasibility of integrating the storage unit within the floater. A preliminary investigation on the influence of integrated storage on the static stability and hydrostatic response of a conventional ballast-stabilised FOWT is conducted, followed by numerical simulations for the dynamic response using ANSYS® AQWA™. Based on the results presented, several conclusions are drawn on the implications of integrating energy storage with floating wind turbine structures. Finally, a preliminary assessment of the thermal efficiency of the storage system based on this specific embodiment is also presented and discussed.

Probabilistic Analysis of the Fatigue Life of Offshore Wind Turbine Structures

2020 ◽  
Author(s):  
Abraham Nispel ◽  
Stephen Ekwaro-Osire ◽  
João Paolo Dias
Keyword(s):  
Fatigue Life ◽  
Wind Turbine ◽  
Structural Reliability ◽  
Research Question ◽  
Limit State ◽  
Fatigue Loading ◽  
Offshore Wind ◽  
Design Parameters ◽  
Offshore Wind Turbine ◽  
Loading Conditions

Abstract The structural response of the main components of offshore wind turbines (OWTs) is considerably sensitive to amplification as their excitation frequencies approach the natural frequency of the structure. Furthermore, uncertainties present in the loading conditions, soil and structural properties highly influence the dynamic response of the OWT. In most cases, the cost of the structure reaches around 30% of the entire OWT because conservative design approaches are employed to ensure its reliability. As a result, this study aims to address the following research question: can the structural reliability of OWT under fatigue loading conditions be predicted more consistently? The specific aims are to (1) establish the design parameters that most impact the fatigue life, (2) determine the probability distributions of the design parameters, and (3) predict the structural reliability. An analytical model to determine the fatigue life of the structure under 15 different loading conditions and two different locations were developed. Global sensitivity analysis was used to establish the more important design parameters. Also, a systematic uncertainty quantification (UQ) scheme was employed to model the uncertainties of model input parameters based on their available information. Finally, the framework used reliability analysis to consistently determine the system probability of failure of the structure based on the fatigue limit state design criterion. The results show high sensitivity for parameters usually considered as deterministic values in design standards. Additionally, it is shown that applying systematic UQ produces a better approximation of the fatigue life under uncertainty and more accurate estimations of the structural reliability. Consequently, more reliable and robust structural designs may be achieved without the need for overestimating the offshore wind turbine response.

scholarly journals Modelling Rain Drop Impact of Offshore Wind Turbine Blades

2012 ◽  
Author(s):  
M. H. Keegan ◽  
D. H. Nash ◽  
M. M. Stack
Keyword(s):  
Wind Turbine ◽  
Impact Damage ◽  
Turbine Blades ◽  
Leading Edge ◽  
Offshore Wind ◽  
Offshore Wind Turbine ◽  
Wind Turbine Blades ◽  
Erosion Testing ◽  
Software Modelling ◽  
The Impact

The effects of rain and hail erosion and impact damage on the leading edge of offshore wind turbine blades have been investigated. A literature review was conducted to establish the effects of exposure to these conditions and also to investigate the liquid impact phenomena and their implications for leading edge materials. The role of Explicit Dynamics software modelling in simulating impact events was then also established. Initial rain impact modelling is then discussed with the results showing good agreement with theoretical predictions both numerically and with respect to the temporal and spatial development of the impact event. Future development of the rain model and a proposed hail model are then detailed. Planned rain impact and erosion testing work is addressed which will be used to validate, inform and compliment the ongoing modelling efforts.

Sign in / Sign up

Export Citation Format

Share Document