scholarly journals Experimentally Measured Thermal Masses of Adsorption Heat Exchangers

Energies ◽  
2020 ◽  
Vol 13 (5) ◽  
pp. 1150 ◽  
Author(s):  
Kyle R. Gluesenkamp ◽  
Andrea Frazzica ◽  
Andreas Velte ◽  
Steven Metcalf ◽  
Zhiyao Yang ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Heat Pumps ◽  
Adsorption Heat ◽  
Heat Transfer Fluid ◽  
Thermal Mass ◽  
Detailed Calculation ◽  
Adsorption Heat Pump ◽  
Reported Data ◽  
Future Work ◽  
The Impact

The thermal masses of components influence the performance of many adsorption heat pump systems. However, typically when experimental adsorption systems are reported, data on thermal mass are missing or incomplete. This work provides original measurements of the thermal masses for experimental sorption heat exchanger hardware. Much of this hardware was previously reported in the literature, but without detailed thermal mass data. The data reported in this work are the first values reported in the literature to thoroughly account for all thermal masses, including heat transfer fluid. The impact of thermal mass on system performance is also discussed, with detailed calculation left for future work. The degree to which heat transfer fluid contributes to overall effective thermal mass is also discussed, with detailed calculation left for future work. This work provides a framework for future reporting of experimental thermal masses. The utilization of this framework will enrich the data available for model validation and provide a more thorough accounting of adsorption heat pumps.

scholarly journals Zeolite NaY-Copper Composites Produced by Sintering Processes for Adsorption Heat Transformation—Technology, Structure and Performance

Energies ◽  
2021 ◽  
Vol 14 (7) ◽  
pp. 1958
Author(s):  
Andreas Velte ◽  
Jörg Weise ◽  
Eric Laurenz ◽  
Joachim Baumeister ◽  
Gerrit Füldner
Keyword(s):  
Thermal Conductivity ◽  
Heat Exchanger ◽  
Metal Structure ◽  
Heat Pumps ◽  
Adsorption Heat ◽  
Thermal Mass ◽  
Heat Conducting ◽  
Zeolite Nay ◽  
Heat Transformation ◽  
The Impact

In adsorption heat pumps, the adsorbent is typically combined with heat conducting structures in order to ensure high power output. A new approach for the direct integration of zeolite granules into a copper structure made of short copper fibers is presented here. Zeolite NaY granules with two different grain sizes are coated with copper fibers and powder and sintered to larger structures. The sorption dynamics of these structures were measured and evaluated in terms of heat and mass transfer resistances and compared to the loose grain configuration of the same material. We found that the thermal conductivity of such a composite structure is approximately 10 times higher than the thermal conductivity of an adsorbent bed with NaY granules. Sorption equilibrium measurements with a volumetric method indicate that the maximum uptake is not altered by the manufacturing process. Furthermore, the impact of the adsorbent–metal structure on the total thermal mass of an adsorption heat exchanger is evaluated. The price of the superior thermal conductivity is a 40% higher thermal mass of the adsorption heat exchanger compared to the loose grain configuration.

scholarly journals Modeling the Performance of Water-Zeolite 13X Adsorption Heat Pump

2017 ◽  
Vol 38 (4) ◽  
pp. 191-207 ◽  
Author(s):  
Kinga Kowalska ◽  
Bogdan Ambrożek
Keyword(s):  
Heat Transfer ◽  
Mass Transfer ◽  
Heat And Mass Transfer ◽  
Heat Pump ◽  
Heat Pumps ◽  
Adsorption Heat ◽  
Coefficient Of Performance ◽  
Desorption Kinetics ◽  
Zeolite 13X ◽  
Adsorption Heat Pump

Abstract The dynamic performance of cylindrical double-tube adsorption heat pump is numerically analysed using a non-equilibrium model, which takes into account both heat and mass transfer processes. The model includes conservation equations for: heat transfer in heating/cooling fluids, heat transfer in the metal tube, and heat and mass transfer in the adsorbent. The mathematical model is numerically solved using the method of lines. Numerical simulations are performed for the system water-zeolite 13X, chosen as the working pair. The effect of the evaporator and condenser temperatures on the adsorption and desorption kinetics is examined. The results of the numerical investigation show that both of these parameters have a significant effect on the adsorption heat pump performance. Based on computer simulation results, the values of the coefficients of performance for heating and cooling are calculated. The results show that adsorption heat pumps have relatively low efficiency compared to other heat pumps. The value of the coefficient of performance for heating is higher than for cooling

scholarly journals Numerical Simulation of the Impact of the Heat Source Position on Melting of a Nano-Enhanced Phase Change Material

Nanomaterials ◽  
2021 ◽  
Vol 11 (6) ◽  
pp. 1425
Author(s):  
Tarek Bouzennada ◽  
Farid Mechighel ◽  
Kaouther Ghachem ◽  
Lioua Kolsi
Keyword(s):  
Heat Transfer ◽  
Phase Change ◽  
Phase Change Material ◽  
Numerical Study ◽  
Melting Rate ◽  
Heat Transfer Fluid ◽  
Commercial Code ◽  
Tube Position ◽  
The Impact ◽  
Change Material

A 2D-symmetric numerical study of a new design of Nano-Enhanced Phase change material (NEPCM)-filled enclosure is presented in this paper. The enclosure is equipped with an inner tube allowing the circulation of the heat transfer fluid (HTF); n-Octadecane is chosen as phase change material (PCM). Comsol-Multiphysics commercial code was used to solve the governing equations. This study has been performed to examine the heat distribution and melting rate under the influence of the inner-tube position and the concentration of the nanoparticles dispersed in the PCM. The inner tube was located at three different vertical positions and the nanoparticle concentration was varied from 0 to 0.06. The results revealed that both heat transfer/melting rates are improved when the inner tube is located at the bottom region of the enclosure and by increasing the concentration of the nanoparticles. The addition of the nanoparticles enhances the heat transfer due to the considerable increase in conductivity. On the other hand, by placing the tube in the bottom area of the enclosure, the liquid PCM gets a wider space, allowing the intensification of the natural convection.

The Impact of Fin Deformation on Condensation Heat Transfer Coefficients in Internally Grooved Tubes

2013 ◽  
Author(s):  
Sunil Mehendale
Keyword(s):  
Heat Transfer ◽  
Heat Exchangers ◽  
Thermal Contact ◽  
Heat Pumps ◽  
Condensation Heat Transfer ◽  
Transfer Coefficients ◽  
Heat Transfer Coefficients ◽  
Condensing Heat Transfer ◽  
The Impact ◽  
Tube Expansion

In HVACR equipment, internally enhanced round tube (microfin) designs such as axial, cross-grooved, helical, and herringbone are commonly used to enhance the boiling and condensing performance of evaporators, condensers, and heat pumps. Typically, such tubes are mechanically expanded by a mandrel into a fin pack to create an interference fit between the tube outside surface and the fin collar to minimize the thermal contact resistance between tube and fin. However, during this expansion process, the internal enhancements undergo varying amounts of deformation, which degrades the in-tube thermal performance. Extensive data on condensing heat transfer coefficients in microfin tubes have been reported in the open literature. However, researchers have seldom used expanded tubes to acquire and report such data. Hence, it is always questionable to use such pristine tube data for designing heat exchangers and HVACR systems. Furthermore, the HVACR industry has been experiencing steeply rising copper costs, and this trend is expected to continue in coming years. So, many equipment manufacturers and suppliers are actively converting tubes from copper to aluminum. However, because of appreciable differences between the material properties of aluminum and copper, as well as other manufacturing variables, such as mandrel dimensions, lubricant used, etc., tube expansion typically deforms aluminum fins more than copper fins. Based on an analysis of the surface area changes arising from tube expansion, and an assessment of the best extant in-tube condensation heat transfer correlations, this work proposes a method of estimating the impact of tube expansion on in-tube condensation heat transfer. The analysis leads to certain interesting and useful findings correlating fin geometry and in-tube condensation thermal resistance. This method can then be applied to more realistically design HVACR heat exchangers and systems.

scholarly journals Actualization of prospects of thermal usage of groundwater of mines during liquidation

2019 ◽  
Vol 123 ◽  
pp. 01046 ◽  
Author(s):  
Ivan Sadovenko ◽  
Oleksandr Inkin ◽  
Nataliia Dereviahina ◽  
Yuliia Khryplyvets
Keyword(s):  
Heat Transfer ◽  
Mine Water ◽  
Heat Removal ◽  
Heat Pumps ◽  
Heat Transfer Fluid ◽  
Circulation System ◽  
Heating And Cooling ◽  
Environmentally Safe ◽  
Mathcad Software ◽  
Almost All

The aim of the paper is justification of the economically efficient technological scheme for development of a thermal resource of “Stashkov” mine after its closure, ensuring the maintenance of a favorable energy and ecological-hydrogeological regime in the region. A geotechnological scheme of environmentally safe usage of mine water was justified, involving water pumping up to the surface, heat removal and water reverse pumping into the seams. The suggested circulation system is characterized by an increased energy balance, since it is used to extract almost all the groundwater heat, as well as part of the heat of host rocks. In order to estimate the effectiveness of usage of this technology, calculations of usage of mine water as a source of low-potential energy in heat pumps in comparison with other alternatives (groundwater and surface water streams) using Mathcad software were performed, and it was established that this gives great conversion coefficients of mine water. A geotechnological scheme of usage of mine water was developed, which considers heat transfer, filtration direction, velocity and temperature of groundwater during pumping and removal of heat-transfer fluid from an aquifer for heating and cooling of buildings. The mechanism of heat removal in a flooded rock massif of amine during liquidation was studied with justification of environmentally safe usage of mine water.

Geothermal Power Cycle Analysis for Commercial Applicability Using Sequestered Supercritical CO2 as a Heat Transfer or Working Fluid

2011 ◽  
Author(s):  
Brian Janke ◽  
Thomas Kuehn
Keyword(s):  
Heat Transfer ◽  
Binary System ◽  
Power Plants ◽  
Power Production ◽  
Operating Conditions ◽  
Heat Transfer Fluid ◽  
Working Fluid ◽  
Direct System ◽  
Geothermal Power ◽  
The Impact

Thermodynamic analysis has been conducted for geothermal power cycles using a portion of deep ground sequestered CO2 as the working fluid. This allows energy production from much shallower depths and in geologic areas with much lower temperature gradients than those of current geothermal systems. Two different system designs were analyzed for power production with varying reservoir parameters, including reservoir depth, temperature, and CO2 mass flow rate. The first design is a direct single-loop system with the CO2 run directly through the turbine. This system was found to provide higher system efficiency and power production, however design complications such as the need for high pressure turbines, two-phase flow through the turbine and the potential for water-CO2 brine mixtures, could require the use of numerous custom components, driving up the cost. The second design is a binary system using CO2 as the heat transfer fluid to supply thermal energy to an Organic Rankine Cycle (ORC). While this system was found to have slightly less power production and efficiency than the direct system, it significantly reduces the impact of design complications associated with the direct system. This in turn reduces the necessity for certain custom components, thereby reducing system cost. While performance of these two systems is largely dependent on location and operating conditions, the binary system is likely applicable to a larger number of sites and will be more cost effective when used in combination with current off-the-shelf ORC power plants.

Use of the Linear Driving Force Approximation in Adsorption Heat Pump and Chiller Modeling

2009 ◽  
Author(s):  
Alex Raymond ◽  
Srinivas Garimella
Keyword(s):  
Mass Transfer ◽  
Driving Force ◽  
Waste Heat ◽  
Heat Pumps ◽  
Adsorption Heat ◽  
Activated Carbon Fiber ◽  
Fickian Diffusion ◽  
Half Cycle ◽  
Linear Driving Force ◽  
Adsorption Heat Pump

Adsorption heat pumps and chillers can utilize solar or waste heat to provide space conditioning, process heating or cooling, or energy storage. In these devices, accurate modeling of intraparticle adsorbate mass transfer is an important part of predicting overall performance. The linear driving force (LDF) approximation is often used for modeling intraparticle mass transfer in place of the more detailed Fickian diffusion (FD) equation for its computational simplicity. This paper directly compares the adsorbate contents predicted by the conventional LDF approximation, an empirical LDF approximation proposed by El-Sharkawy et al. [1], and the FD equations for cylindrical adsorbent fibers such as activated carbon fiber (ACF). The conditions under which the LDFs agree with the FD equation are then evaluated. It is shown that for a given working pair, agreement between the LDF and FD equations is affected by the diffusivity, particle radius, half-cycle time, initial adsorbate content, and equilibrium adsorbate content. The maximum possible error in adsorbate content predicted by the LDF approximation compared with the FD solution is then calculated for the ACF (A-20)-ethanol working pair. Although the maximum error will be different for other cases, the technique used in this paper can be reproduced to determine the greatest possible LDF error for any working pair.

scholarly journals Nanofluids in Solar Thermal Collectors: Review and Limitations

2020 ◽  
Vol 41 (11) ◽  
Author(s):  
Ifeoluwa Wole-osho ◽  
Eric C. Okonkwo ◽  
Serkan Abbasoglu ◽  
Doga Kavaz
Keyword(s):  
Heat Transfer ◽  
Material Science ◽  
Solar Thermal ◽  
Heat Transfer Fluid ◽  
Full Potential ◽  
Solar Collectors ◽  
Solar Thermal Collectors ◽  
Overall Efficiency ◽  
The Impact

Abstract Solar thermal collectors are systems that allow for the use of solar energy in thermal applications. These collectors utilize a heat transfer fluid to transport absorbed solar radiation to applications where they are needed. Scientists in a bid to improve the conversion efficiency of solar collectors have suggested different collector designs and improved collector materials. Over the last 25 years, the study of nanofluids and their applications have revolutionized material science, and nanotechnology has found applications in improving solar collector materials. This article reviews the impact of different nanomaterials on the efficiency of solar collectors. The study also outlines the limitations of applying nanofluids and discusses the long-term challenges of their application to solar collectors. Nanofluids have the potential to improve the overall efficiency of most solar collectors, however, the full potential of nanofluids in heat transfer applications cannot be completely achieved until some of the questions regarding hysteresis, stability, and the overall predictability of nanofluids are answered.

Sign in / Sign up

Export Citation Format

Share Document