scholarly journals Heat and Mass Transfer Analysis in Chemically Reacting Flow of Non-Newtonian Liquid with Local Thermal Non-Equilibrium Conditions: A Comparative Study

Energies ◽  
2021 ◽  
Vol 14 (16) ◽  
pp. 5019
Author(s):  
A. Alhadhrami ◽  
B. M. Prasanna ◽  
Rajendra Prasad K. C. ◽  
K. Sarada ◽  
Hassan A. H. Alzahrani

In the current paper, we endeavour to execute a numerical analysis in connection with the boundary layer flow induced in a non-Newtonian liquid by a stretching sheet with heat and mass transfer. The effects of chemical reactions and local thermal non-equilibrium (LTNE) conditions are considered in the modelling. The LTNE model is based on energy equations, and provides unique heat transfer for both liquid phases. As a result, different temperature profiles for both the fluid and solid phases are used in this work. The model equation system is reduced by means of appropriate similarity transformations, which are then numerically solved by employing the classical Runge–Kutta (RK) scheme along with the shooting method. The resultant findings are graphed to show the effects of various physical factors on the involved distributions. Outcomes reveal that Jeffrey fluid shows improved velocity for lower values of porosity when compared to Oldroyd-B fluid. However, for higher values of porosity, the velocity of the Jeffery fluid declines faster than that of the Oldroyd-B fluid. Jeffery liquid shows improved fluid phase mass transfer, and decays more slowly than Oldroyd-B liquid for higher values of chemical reaction rate parameter.

2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
Odelu Ojjela ◽  
N. Naresh Kumar

This paper presents an incompressible two-dimensional heat and mass transfer of an electrically conducting micropolar fluid flow in a porous medium between two parallel plates with chemical reaction, Hall and ion slip effects. Let there be periodic injection or suction at the lower and upper plates and the nonuniform temperature and concentration at the plates are varying periodically with time. The flow field equations are reduced to nonlinear ordinary differential equations using similarity transformations and then solved numerically by quasilinearization technique. The profiles of velocity components, microrotation, temperature distribution and concentration are studied for different values of fluid and geometric parameters such as Hartmann number, Hall and ion slip parameters, inverse Darcy parameter, Prandtl number, Schmidt number, and chemical reaction rate and shown in the form of graphs.


Symmetry ◽  
2020 ◽  
Vol 12 (7) ◽  
pp. 1176
Author(s):  
Siti Nur Alwani Salleh ◽  
Norfifah Bachok ◽  
Fadzilah Md Ali ◽  
Norihan Md Arifin

The present paper concentrates on the second-order slip flow over a moving thin needle in a nanofluid. The combined effects of thermophoresis and Brownian motion are considered to describe the heat and mass transfer performance of nanofluid. The resulting system of equations are obtained using similarity transformations and being executed in MATLAB software via bvp4c solver. The physical characteristics of embedded parameters on velocity, temperature, concentration, coefficient of skin friction, heat and mass transfer rates are demonstrated through a graphical approach and are discussed in detail. The obtained outcomes are validated with the existing works and are found to be in good agreement. It is shown that, for a specific domain of moving parameter, dual solutions are likely to exist. The stability analysis is performed to identify the stability of the solutions gained, and it is revealed that only one of them is numerically stable. The analysis indicated that the percentage of increment in the heat and mass transfer rates from no-slip to slip condition for both thin and thick surfaces of the needle ( a = 0.1 and a = 0.2 ) are 10.77 % and 12.56 % , respectively. Moreover, the symmetric behavior is noted for the graphs of reduced heat and mass transfer when the parameters N b and N t are the same.


2012 ◽  
Vol 67 (8-9) ◽  
pp. 517-524 ◽  
Author(s):  
Ahmed Alsaedi ◽  
Zahid Iqbal ◽  
Meraj Mustafa ◽  
Tasawar Hayat

The two-dimensional magnetohydrodynamic (MHD) flow of a Jeffrey fluid is investigated in this paper. The characteristics of heat and mass transfer with chemical reaction have also been analyzed. Convective boundary conditions have been invoked for the thermal boundary layer problem. Exact similarity solutions for flow, temperature, and concentration are derived. Interpretation to the embedded parameters is assigned through graphical results for dimensionless velocity, temperature, concentration, skin friction coefficient, and surface heat and mass transfer. The results indicate an increase in the velocity and the boundary layer thickness by increasing the rheological parameter of the Jeffrey fluid. An intensification in the chemical reaction leads to a thinner concentration boundary layer.


2018 ◽  
Vol 82 (1) ◽  
Author(s):  
Наталья Николаевна Сороковая ◽  
Дмитрий Николаевич Коринчук

Разработана математическая модель и численный метод расчета динамики тепломассопереноса, фазовых превращений и усадки при сушке коллоидных капиллярно-пористых тел цилиндрической формы в условиях равномерного обдува теплоносителем. Математическая модель строилась на базе дифференциального уравнения переноса субстанции (энергии, массы, импульса) в деформируемых системах. Проведены экспериментальные исследования кинетики обезвоживания частиц энергетической вербы в потоке воздуха с целью верификации математической модели. Обоснована возможность ее использования для расчета совместных процессов сушки и начального этапа термического разложения биомассы. С использованием ранее полученных данных по значениям энергии активации Аэф(Т) для различных видов биомассы проведено математическое моделирование динамики и кинетики высокотемпературной сушки в потоке дымовых газов энергетической вербы, которая сопровождается термодеструкцией гемиоцеллюлозы. Результаты численных экспериментов свидетельствуют об адекватности предложенного подхода, эффективности математической модели и метода ее реализации. На их основе возможно проводить исследование динамики тепломассопереноса при сушке частиц различных видов измельченной биомассы; определение температуры начала и окончания первой стадии термического разложения; момента достижения равновесного влагосодержания в зависимости от свойств материала и сушильного агента. Эти данные позволяют выбирать оптимальные с точки зрения сохранения энергии и качества высушиваемого продукта  режимные параметры процесса.         A mathematical model and a numerical method for calculating the dynamics of heat and mass transfer, phase transformations and shrinkage during the drying of colloidal capillary-porous cylindrical bodies under conditions of equitable winding by a coolant are developed. The mathematical model was based on the differential equation of substance (energy, mass, impulse) transfer in deformable systems. It includes the equations diffusion-filtration transfer of energy for the system as a whole, and the mass transfer of the liquid, vapor and air phases in the pores of the body. Expressions for the intensity of evaporation of a liquid, capillary pressure, and the diffusion coefficients are presented. The relative volume strain was found by means of an analytical solution of the thermoconcentration deformation equation. Based on the explicit three-layer counting difference scheme and the procedure splitting of algorithm  by physical factors, a numerical method for realizing this mathematical model is developed.Experimental studies of the kinetics of dehydration of energy willow particles in the airflow were carried out to verify the mathematical model. Its applicability for calculating combined processes of drying and of the initial stage of thermal decomposition of biomass is substantiated. Using the previously obtained data on the activation energy values for various types of biomass, a mathematical simulation of the dynamics and kinetics of high-temperature drying in the flue gas flow of energy willow was carried out, which is accompanied by thermal destruction of hemiocellulose. The results of numerical experiments indicate the adequacy of the proposed approach, the effectiveness of the mathematical model and the method of its implementation. On their basis, it is possible to study the dynamics of heat and mass transfer when drying particles of different types of ground biomass; determination of the temperature of the beginning and ending of the first stage of thermal decomposition; the moment when the equilibrium moisture content is reached, depending on the properties of the material and the drying agent. These data allow choosing the process parameters that are optimal in terms of energy saving and quality of the dried product.


Sign in / Sign up

Export Citation Format

Share Document