scholarly journals Commercial PV Inverter IEEE 1547.1 Ride-Through Assessments Using an Automated PHIL Test Platform

Energies ◽  
2021 ◽  
Vol 14 (21) ◽  
pp. 6936
Author(s):  
Nayeem Ninad ◽  
Estefan Apablaza-Arancibia ◽  
Michel Bui ◽  
Jay Johnson
Keyword(s):  
Test Procedure ◽  
Rate Of Change ◽  
Test Results ◽  
Distributed Energy ◽  
Pv Inverter ◽  
System Validation ◽  
Test Platform ◽  
Voltage Frequency ◽  
Grid Codes ◽  
First Time

As more countries seek solutions to their de-carbonization targets using renewable energy (RE) technologies, interconnection standards and national grid codes for distributed energy resources (DER) are being updated to support higher penetrations of RE and improve grid stability. Common grid-code revisions mandate DER devices, such as solar inverters and energy storage systems, ride-through (RT) voltage and frequency disturbances. This is necessary because as the percentage of generation from DER increases, there is a greater risk power system faults will cause many or all DER to trip, triggering a substantial load-generation imbalance and possible cascading blackout. This paper demonstrates for the first time a methodology to verify commercial DER devices are compliant to new voltage, frequency, and rate of change of frequency (ROCOF) RT requirements established in IEEE Std. 1547-2018. The methodology incorporates a software automation tool, called the SunSpec System Validation Platform (SVP), in combination with a hardware-in-the-loop (HIL) system to execute the IEEE Std. 1547.1-2020 RT test protocols. In this paper, the approach is validated with two commercial photovoltaic inverters, the test results are analyzed for compliance, and improvements to the test procedure are suggested.

scholarly journals COT-13 Current situation and problems of cancer genomic profiling test in Kyoto University Hospital

2020 ◽  
Vol 2 (Supplement_3) ◽  
pp. ii22-ii22
Author(s):  
Yoshiki Arakawa ◽  
Junko Suga ◽  
Yukinori Terada ◽  
Kohei Nakajima ◽  
Masahiro Tanji ◽  
...  
Keyword(s):  
Treatment Options ◽  
Insurance Coverage ◽  
Germline Mutations ◽  
University Hospital ◽  
Genomic Profiling ◽  
Test Results ◽  
Final Test ◽  
First Time ◽  
To Receive ◽  
Secondary Finding

Abstract Objective: Kyoto University Hospital has introduced the cancer genomic profiling tests, Oncoprime in 2015, Guardant360 in 2018, which are not under insurance coverage, FoundationOne CDx(F1CDx) and OncoGuide NCC Oncopanel system(NCC OP) in 2019, which received approval for insurance coverage for the first time in Japan. We investigated the results of cancer genomic profiling test under insurance coverage in our hospital. Methods: A special facility for the cancer genomic profiling tests was produced. To perform the cancer genomic profiling test, an outpatient must visit the facility three times (learning, ordering of the test, and getting the results). The expert panels decide the final test results and treatment options with the all information of the patients. Results: From November 2019 to March 2020, 51 and 9 patients were tested with F1CDx and NCC OP, respectively. 16 patients (31%) of F1CDX and 2 patients (22%) of NCC OP got treatment recommendations from the expert panels. However, only 5 patients (9.8%) of F1CDX and 1 patient (11%) of NCC OP received the treatments. The secondary finding suspecting germline mutations was found in 8 patients of F1CDX. Conclusion: After the approval the cancer genomic profiling tests with insurance coverage in Japan, it becomes easy for the patients to perform the test and get the genetic information of the tumor. However, it remains not easy to receive the recommended drugs because of several limitations of their usages.

Improving the Strength of Abrasive Wheels and Optimizing the Control over the Strength of Composite Abrasive Materials

2019 ◽  
Vol 946 ◽  
pp. 380-385
Author(s):  
Boris A. Chaplygin ◽  
Viacheslav V. Shirokov ◽  
Tat'yana A. Lisovskaya ◽  
Roman A. Lisovskiy
Keyword(s):  
Mechanical Properties ◽  
Test Results ◽  
Key Factors ◽  
Special Equipment ◽  
Material Density ◽  
Factors Affecting ◽  
Control Factors ◽  
Reinforcing Material ◽  
Special Studies ◽  
First Time

The strength of abrasive wheels is one of the key factors affecting the performance of abrasive machining. The paper discusses ways to improve the strength of abrasive wheels. The stress-state mathematical model presented herein is a generalization of the existing models. It is used herein to find for the first time that there are numerous optimal combinations of the elastic modulus and reinforcing material density, which result in the same minimum value of the objective function. It is found out that increasing the radius of the reinforcing component while also optimizing the mechanical properties of its material may increase the permissible breaking speed of the wheel several times. We herein present a regression equation and a nomogram for finding the optimal combination of control factors. Conventional methods for testing the mechanical properties of materials, which have been proven reliable for testing metals and alloys, are not as reliable for testing abrasive materials, as the test results they generate are not sufficiently stable or accurate. We therefore propose an alternative method that does not require any special equipment or special studies.

scholarly journals Experimental Study of the Space–Time Effect of a Double-Pipe Frozen Curtain Formation with Different Groundwater Velocities

Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3830
Author(s):  
Shicheng Sun ◽  
Chuanxin Rong ◽  
Hua Cheng ◽  
Bin Wang ◽  
Xiaogang Jiang ◽  
...  
Keyword(s):  
Freezing Temperature ◽  
Physical Model Test ◽  
Sand Layer ◽  
Test Results ◽  
Groundwater Velocity ◽  
Test Platform ◽  
The Difference ◽  
Freezing Test ◽  
Double Pipe ◽  
Thermal Physical Properties

Groundwater velocity has significant effects on the formation of a frozen curtain during freezing. In order to study the influence of the velocity on a frozen curtain, a large physical model test platform was established for double-pipe freezing. Based on this platform, freezing tests for different velocities were carried out. Quartz sand was selected as a similar material. The freezing temperature of the saturated sand layer was found by analyzing the results of the nuclear magnetic resonance (NMR). Based on the study of the thermal physical properties of the sand layer, the freezing test results were analyzed, and the results showed that the flow led to the differential development of the temperature between the upstream and downstream sections of the freezing pipes. Moreover, the larger the velocity, the greater the difference. The flow prolonged the overlapping time of the frozen curtains. Additionally, the flow slowed down the development of the frozen curtain area and the frozen curtain thickness. The larger the flow velocity, the greater the inhibition of the flow on the development of the frozen curtain. The test results can provide more references for the design and construction of freezing engineering with flowing groundwater.

The Research of IC Test Based on LTX-77 Test System

2014 ◽  
Vol 496-500 ◽  
pp. 1176-1179
Author(s):  
Li Tan ◽  
Yu Fang
Keyword(s):  
Test Object ◽  
Test System ◽  
Test Method ◽  
Test Results ◽  
Analog Ic ◽  
Test Platform ◽  
Logic Functions ◽  
Actual Test ◽  
Ic Test

LTX-77 test system is a large IC test system that is used for various kinds of analog IC, digital IC and analog digital mixed IC. It can be used to test DC parameters, AC parameters and logic functions. In the paper, the IC test platform is LTX-77 test system. IC ADC0804 was tested as the test object. The test method of IC is described in the view of actual test. The test results show that the test system is convenient and accurate, which has important practical value for IC manufacturers and users.

Ambient vibration test results of the Imperial County Services Building

1983 ◽  
Vol 73 (6A) ◽  
pp. 1895-1902
Author(s):  
Gerard C. Pardoen
Keyword(s):  
Strong Motion ◽  
Ambient Vibration ◽  
Vibration Test ◽  
Test Results ◽  
Structural Failure ◽  
Imperial Valley ◽  
Ambient Vibration Test ◽  
Significant Interest ◽  
First Time ◽  
County Services

Abstract The ambient vibration test results conducted on the Imperial County Services Building prior to the 15 October 1979 Imperial Valley earthquake are summarized. These results are of significant interest because the Imperial County Services Building has been the source of many postearthquake investigations due to the fact that the 1979 earthquake represented the first time a building instrumented with strong motion recorders suffered and recorded the major structural failure.

Answering the Questions of the Psychologist Assessing the Visually Handicapped Child

1975 ◽  
Vol 69 (8) ◽  
pp. 350-353
Author(s):  
John L. Morse
Keyword(s):  
Classroom Observation ◽  
Handicapped Child ◽  
Test Results ◽  
Visual Condition ◽  
Inappropriate Behaviors ◽  
Test Conditions ◽  
Visually Handicapped ◽  
First Time

The most common question asked by the psychologist who is faced for the first time with assessing a visually handicapped child are answered. The 15 questions include such areas as the required information concerning visual condition, background of the client, test conditions, the role of the parents, classroom observation, behaviors observed during testing, evaluation of test results, expectations of parents and teachers, and modification of a child's inappropriate behaviors.

scholarly journals The Susceptibility of Meningococci to the Antimicrobial Agents in Moscow 2006 - 2015

2016 ◽  
Vol 15 (3) ◽  
pp. 7-14 ◽  
Author(s):  
M. A. Koroleva ◽  
I. S. Koroleva ◽  
I. M. Zakroeva ◽  
I. M. Gruber
Keyword(s):  
Cerebrospinal Fluid ◽  
Continuous Monitoring ◽  
Antimicrobial Agents ◽  
Meningococcal Infection ◽  
Test Results ◽  
Prognostic Criteria ◽  
Comparison Results ◽  
Moderately Resistant ◽  
First Time

Relevance. One of the prognostic criteria meningococcal infection (MI) epidemic status process is the increasing number of resistant to antibiotics meningococcal strains. Aim of this study was to investigate the dynamics of invasive strains of N. meningitidis susceptibility to antibiotics in Moscow in 2006 - 2015. Materials and methods. Studied 98 strains of N. meningitidis, isolated from blood and cerebrospinal fluid of patients with MI. The study changes of sensitivity N. meningitidis to antibiotics was occured in two periods: first -2006 - 2011 and second - 2012 - 2015. The MIC was determined by E-test. Results. In the present study revealed for the first time the Russian strains of N. meningitidis, moderately resistant to penicillin (5 strains) and resistant to rifampicin (3 strains). Among the studied strains were not found resistant to ceftriaxone, ciprofloxacin, tetracycline and chloramphenicol. Discussion. Comparison results two study periods allowed to reveal the dynamics of increasing the sensitivity of N. meningitidis to antibiotics, which confirms the decline in meningococcal virulence, and as a result, continued interepidemic MI period. Conclusions. Despite the decline antibakterial resistance is required continuous monitoring.

scholarly journals Mathematical literacy as an important component of preparing a future teacher

2021 ◽  
Vol 27 (2) ◽  
pp. 149-153
Author(s):  
Natalia Lvovna Margolina ◽  
Irina Vladimirovna Nalimova
Keyword(s):  
Modern Society ◽  
State University ◽  
Test Results ◽  
Mathematical Literacy ◽  
Mathematical Concepts ◽  
Professional Activities ◽  
Teaching Aids ◽  
Points Of View ◽  
Main Components ◽  
First Time

The article analyzes the concept of mathematical literacy. The formation of mathematical literacy among members of modern society is a fundamental basis for the formation of functional literacy. Currently, there is no single approach to the interpretation of the concept of "mathematical literacy", the article provides several different approaches to the definition. Based on the analysis of the points of view of different scientists, the authors of the article highlight the main components of the concept of "mathematical literacy". These include: literacy of mathematical speech; possession of mathematical concepts; the ability to correctly formulate definitions and statements; the ability to apply mathematics to research. The paper provides a characteristic of the listed components of mathematical literacy. In addition, in this work, for the first time, an attempt was made to formulate the levels of mathematical literacy – speech, terminological, critical and operational. The article presents the results of testing students in pedagogic areas of training of two universities – Kostroma State University and Yaroslavl State Pedagogic University. The test was aimed at assessing the level of mathematical literacy of future teachers, for whom teaching mathematics will be a part of their professional activities. The test tested not only the knowledge of terms and the ability to give definitions, but also the ability to correctly apply mathematics to solve practical problems with subsequent interpretation, as well as the ability to see errors and inaccuracies in the texts of students' works, Internet sources and teaching aids. The authors identified criteria for assessing the test results and for each criterion; a quantitative indicator was determined equal to the number of correctly completed tasks. The low results of even third-year students show topicality of specific activities that could help improve the mathematical literacy of pedagogues.

scholarly journals Preloading Effect On The Strength of Cement Mass Mixing Treated Salty Sand

2021 ◽  
Author(s):  
Rasoul Alipour
Keyword(s):  
Thick Layer ◽  
Test Results ◽  
Cement Slurry ◽  
Sem Images ◽  
Treated Soil ◽  
Pure Salt ◽  
Ucs Test ◽  
Southwest Of Iran ◽  
First Time ◽  
Electronic Microscope

Abstract Existing problematic sub-layers in mixing technologies are a challenge, and for the first time, the effects of salt sub-layers in mass mixing technology have been investigated in this study for sandy salt in the southwest of Iran. This paper discusses the influence of adding various cement contents, Aw, and imposing different preloading values on the salty sand soil. First, salt and sand samples were dried, then, 90 % sand was mixed with 10% salt. After that, 30 % water was mixed thoroughly with the mixture of salty sand to obtain slurries. Cement slurry at a water-cement ratio (w/c) of 0.6 was then added to the sample and thoroughly mixed. The amount of cement in a slurry form that was added to the salty soil was 2, 4, 6, 8, and 10% by mass of dry soil. Each treated soil preloaded by 0, 9, and 45 kPa. After 120 days, the unconfined compressive strength of the sample was determined. Furthermore, by Scanning Electronic Microscope, SEM, the microstructures of treated samples were analyzed. At the end Unconfined Compression Strength, UCS, test results normalized to the non-preloaded treated soil. By increasing cement content, the effect of preloading in increasing UCS will decrease. In the SEM images for Aw=2%, the effect of preloading indicates porous shape for non-preloaded samples. Vice versa by Aw=8%, porous shape in the SEM images will disappear. In the end, treatability studies of pure salt in the thick layer have been investigated.

scholarly journals Testing the Force Absorption of Composite Materials to Select the Best for Making a Helmet

2021 ◽  
Vol 15 (4) ◽  
pp. 581-584
Author(s):  
Božo Bujanić ◽  
Matija Košak
Keyword(s):  
Carbon Fibers ◽  
Material Selection ◽  
Glass Fibers ◽  
Test Procedure ◽  
Test Results ◽  
Aramid Fibers ◽  
Absorption Properties ◽  
Eu Project ◽  
Impact Absorption ◽  
The Eu

The paper presents and describes the procedure of testing the materials that were available for the production of a multifunctional protective helmet. The procedure was carried out at the company Šestan-Busch d.o.o. as part of the EU project for the development and production of a multifunctional protective helmet. The test results showed that carbon fibers polymers as a composite material have the best impact absorption properties which was a key criterion for material selection. Other materials; glass fibers polymers, aramid fibers polymers and combinations in the test procedure showed worse results compared to the selected criterion.

Sign in / Sign up

Export Citation Format

Share Document