scholarly journals Four-Dimensional Reconstruction of Leaked Gas Cloud Based on Computed Tomography Processing of Multiple Optical Paths Infrared Measurement

2021 ◽  
Vol 8 (1) ◽  
pp. 33
Author(s):  
Daiki Shiozawa ◽  
Masaki Uchida ◽  
Yuki Ogawa ◽  
Takahide Sakagami ◽  
Shiro Kubo
Keyword(s):  
Detection System ◽  
Flow Direction ◽  
Three Dimensional ◽  
Source Detection ◽  
Gas Leakage ◽  
Infrared Rays ◽  
Dimensional Reconstruction ◽  
Infrared Measurement ◽  
Optical Paths ◽  
Gas Cloud

Currently, gas leakage source detection is conducted by the human senses and experience. The development of a remote gas leakage source detection system is required. In this research, an infrared camera was used to detect gas leakage. The gas can be detected by the absorption of infrared rays by the gas and the infrared rays emitted from the gas itself. A three-dimensional reconstruction of a leaked gas cloud was performed to identify the gas leakage source and the flow direction of the gas. The so-called four-dimensional reconstruction of the leaked gas cloud, i.e., reconstruction of three-dimensional images of a gas cloud varying with time, was successfully performed by applying the ART (Algebraic Reconstruction Techniques) method to the multiple optical paths of infrared measurement.

Three-Dimensional Reconstruction Using Stereo Pairs from Serial Thick Sections

1977 ◽  
Vol 35 ◽  
pp. 562-563
Author(s):  
Robert Glaeser ◽  
Thomas Bauer ◽  
David Grano
Keyword(s):  
Three Dimensional ◽  
Dimensional Structure ◽  
Serial Sections ◽  
Thin Sections ◽  
3 Dimensional ◽  
Transmission Electron ◽  
Freeze Dried ◽  
Dimensional Reconstruction ◽  
Stereo Imagery ◽  
Whole Mounts

In transmission electron microscopy, the 3-dimensional structure of an object is usually obtained in one of two ways. For objects which can be included in one specimen, as for example with elements included in freeze- dried whole mounts and examined with a high voltage microscope, stereo pairs can be obtained which exhibit the 3-D structure of the element. For objects which can not be included in one specimen, the 3-D shape is obtained by reconstruction from serial sections. However, without stereo imagery, only detail which remains constant within the thickness of the section can be used in the reconstruction; consequently, the choice is between a low resolution reconstruction using a few thick sections and a better resolution reconstruction using many thin sections, generally a tedious chore. This paper describes an approach to 3-D reconstruction which uses stereo images of serial thick sections to reconstruct an object including detail which changes within the depth of an individual thick section.

3-D reconstruction of molecular shape from microcrystal thin sections

1983 ◽  
Vol 41 ◽  
pp. 748-749
Author(s):  
S. Cusack ◽  
J.-C. Jésior
Keyword(s):  
Three Dimensional ◽  
Molecular Shape ◽  
Biological Molecules ◽  
Fourier Space ◽  
Single Particles ◽  
Thin Sections ◽  
Standard Methods ◽  
X Ray ◽  
X Ray Crystallography ◽  
Dimensional Reconstruction

Three-dimensional reconstruction techniques using electron microscopy have been principally developed for application to 2-D arrays (i.e. monolayers) of biological molecules and symmetrical single particles (e.g. helical viruses). However many biological molecules that crystallise form multilayered microcrystals which are unsuitable for study by either the standard methods of 3-D reconstruction or, because of their size, by X-ray crystallography. The grid sectioning technique enables a number of different projections of such microcrystals to be obtained in well defined directions (e.g. parallel to crystal axes) and poses the problem of how best these projections can be used to reconstruct the packing and shape of the molecules forming the microcrystal.Given sufficient projections there may be enough information to do a crystallographic reconstruction in Fourier space. We however have considered the situation where only a limited number of projections are available, as for example in the case of catalase platelets where three orthogonal and two diagonal projections have been obtained (Fig. 1).

Computer Assisted Image Reconstruction of Oligomer Structure

1976 ◽  
Vol 34 ◽  
pp. 472-473
Author(s):  
A.M. Jones ◽  
A. Max Fiskin
Keyword(s):  
Three Dimensional ◽  
Depth Of Field ◽  
Computer Assisted ◽  
Projection Data ◽  
Two Dimensional ◽  
Single Particles ◽  
Dimensional Reconstruction ◽  
Computer Assisted Image ◽  
The Fourier Transform ◽  
Space Approach

If the tilt of a specimen can be varied either by the strategy of observing identical particles orientated randomly or by use of a eucentric goniometer stage, three dimensional reconstruction procedures are available (l). If the specimens, such as small protein aggregates, lack periodicity, direct space methods compete favorably in ease of implementation with reconstruction by the Fourier (transform) space approach (2). Regardless of method, reconstruction is possible because useful specimen thicknesses are always much less than the depth of field in an electron microscope. Thus electron images record the amount of stain in columns of the object normal to the recording plates. For single particles, practical considerations dictate that the specimen be tilted precisely about a single axis. In so doing a reconstructed image is achieved serially from two-dimensional sections which in turn are generated by a series of back-to-front lines of projection data.

Computer-aided methods for 3-D visualization of serial sections and thick biological specimens

1992 ◽  
Vol 50 (2) ◽  
pp. 1060-1061
Author(s):  
Mark Ellisman ◽  
Maryann Martone ◽  
Gabriel Soto ◽  
Eleizer Masliah ◽  
David Hessler ◽  
...  
Keyword(s):  
Alzheimer’S Disease ◽  
Alzheimer's Disease ◽  
Three Dimensional ◽  
Neuritic Plaque ◽  
Dimensional Structure ◽  
Data Sets ◽  
Molecular Physiology ◽  
Research Activities ◽  
Computer Aided ◽  
Dimensional Reconstruction

Structurally-oriented biologists examine cells, tissues, organelles and macromolecules in order to gain insight into cellular and molecular physiology by relating structure to function. The understanding of these structures can be greatly enhanced by the use of techniques for the visualization and quantitative analysis of three-dimensional structure. Three projects from current research activities will be presented in order to illustrate both the present capabilities of computer aided techniques as well as their limitations and future possibilities.The first project concerns the three-dimensional reconstruction of the neuritic plaques found in the brains of patients with Alzheimer's disease. We have developed a software package “Synu” for investigation of 3D data sets which has been used in conjunction with laser confocal light microscopy to study the structure of the neuritic plaque. Tissue sections of autopsy samples from patients with Alzheimer's disease were double-labeled for tau, a cytoskeletal marker for abnormal neurites, and synaptophysin, a marker of presynaptic terminals.

The Three-dimensional structure of frozen-hydrated nudaurelia capensis β virus

1987 ◽  
Vol 45 ◽  
pp. 650-651
Author(s):  
N. H. Olson ◽  
T. S. Baker ◽  
Wu Bo Mu ◽  
J. E. Johnson ◽  
D. A. Hendry
Keyword(s):  
South African ◽  
Rna Virus ◽  
Carbon Film ◽  
Three Dimensional ◽  
Dimensional Structure ◽  
Electron Dose ◽  
Total Electron ◽  
Three Dimensional Structure ◽  
Negative Stain ◽  
Dimensional Reconstruction

Nudaurelia capensis β virus (NβV) is an RNA virus of the South African Pine Emperor moth, Nudaurelia cytherea capensis (Lepidoptera: Saturniidae). The NβV capsid is a T = 4 icosahedron that contains 60T = 240 subunits of the coat protein (Mr = 61,000). A three-dimensional reconstruction of the NβV capsid was previously computed from visions embedded in negative stain suspended over holes in a carbon film. We have re-examined the three-dimensional structure of NβV, using cryo-microscopy to examine the native, unstained structure of the virion and to provide a initial phasing model for high-resolution x-ray crystallographic studiesNβV was purified and prepared for cryo-microscopy as described. Micrographs were recorded ∼1 - 2 μm underfocus at a magnification of 49,000X with a total electron dose of about 1800 e-/nm2.

Visualisation of E. coli ribosomal RNA in situ by electron spectroscopic imaging and image averaging

1992 ◽  
Vol 50 (1) ◽  
pp. 466-467
Author(s):  
Daniel Beniac ◽  
George Harauz
Keyword(s):  
Ribosomal Rna ◽  
Three Dimensional ◽  
Spectroscopic Imaging ◽  
Electron Spectroscopic Imaging ◽  
E Coli ◽  
Microscopical Technique ◽  
Quantitative Image ◽  
Dimensional Reconstruction ◽  
Image Averaging ◽  
Protein Components

The structures of E. coli ribosomes have been extensively probed by electron microscopy of negatively stained and frozen hydrated preparations. Coupled with quantitative image analysis and three dimensional reconstruction, such approaches are worthwhile in defining size, shape, and quaternary organisation. The important question of how the nucleic acid and protein components are arranged with respect to each other remains difficult to answer, however. A microscopical technique that has been proposed to answer this query is electron spectroscopic imaging (ESI), in which scattered electrons with energy losses characteristic of inner shell ionisations are used to form specific elemental maps. Here, we report the use of image sorting and averaging techniques to determine the extent to which a phosphorus map of isolated ribosomal subunits can define the ribosomal RNA (rRNA) distribution within them.

Semi-automated methods for 3-D reconstruction of macromolecular complexes

1995 ◽  
Vol 53 ◽  
pp. 42-43
Author(s):  
B. Carragher ◽  
M. Whittaker
Keyword(s):  
Three Dimensional ◽  
Time Saving ◽  
Macromolecular Complexes ◽  
Symmetry Properties ◽  
Dimensional Reconstruction ◽  
Experienced Operator ◽  
Projection Images ◽  
The Individual ◽  
Natural Symmetry

Techniques for three-dimensional reconstruction of macromolecular complexes from electron micrographs have been successfully used for many years. These include methods which take advantage of the natural symmetry properties of the structure (for example helical or icosahedral) as well as those that use single axis or other tilting geometries to reconstruct from a set of projection images. These techniques have traditionally relied on a very experienced operator to manually perform the often numerous and time consuming steps required to obtain the final reconstruction. While the guidance and oversight of an experienced and critical operator will always be an essential component of these techniques, recent advances in computer technology, microprocessor controlled microscopes and the availability of high quality CCD cameras have provided the means to automate many of the individual steps.During the acquisition of data automation provides benefits not only in terms of convenience and time saving but also in circumstances where manual procedures limit the quality of the final reconstruction.

Methods for three-dimensional reconstruction of cellular components within a thick section

1986 ◽  
Vol 44 ◽  
pp. 18-21
Author(s):  
J. Frank ◽  
B. F. McEwen ◽  
M. Radermacher ◽  
C. L. Rieder
Keyword(s):  
Tilt Angle ◽  
Tomographic Reconstruction ◽  
3D Structure ◽  
Three Dimensional ◽  
Thick Section ◽  
Three Dimensional Reconstruction ◽  
Axis Ratio ◽  
Dimensional Reconstruction ◽  
Cellular Components

The tomographic reconstruction from multiple projections of cellular components, within a thick section, offers a way of visualizing and quantifying their three-dimensional (3D) structure. However, asymmetric objects require as many views from the widest tilt range as possible; otherwise the reconstruction may be uninterpretable. Even if not for geometric obstructions, the increasing pathway of electrons, as the tilt angle is increased, poses the ultimate upper limitation to the projection range. With the maximum tilt angle being fixed, the only way to improve the faithfulness of the reconstruction is by changing the mode of the tilting from single-axis to conical; a point within the object projected with a tilt angle of 60° and a full 360° azimuthal range is then reconstructed as a slightly elliptic (axis ratio 1.2 : 1) sphere.

Predicting spatial activity patterns in a neural map from a probabilistic atlas of 3-D reconstructed neurons

1995 ◽  
Vol 53 ◽  
pp. 812-813
Author(s):  
G. Jacobs ◽  
F. Theunissen
Keyword(s):  
Activity Patterns ◽  
Three Dimensional ◽  
Sensory System ◽  
Neural System ◽  
Probabilistic Atlas ◽  
Uniform Sample ◽  
Dimensional Reconstruction ◽  
The Time Domain ◽  
And Function ◽  
Visualization Techniques

In order to understand how the algorithms underlying neural computation are implemented within any neural system, it is necessary to understand details of the anatomy, physiology and global organization of the neurons from which the system is constructed. Information is represented in neural systems by patterns of activity that vary in both their spatial extent and in the time domain. One of the great challenges to microscopists is to devise methods for imaging these patterns of activity and to correlate them with the underlying neuroanatomy and physiology. We have addressed this problem by using a combination of three dimensional reconstruction techniques, quantitative analysis and computer visualization techniques to build a probabilistic atlas of a neural map in an insect sensory system. The principal goal of this study was to derive a quantitative representation of the map, based on a uniform sample of afferents that was of sufficient size to allow statistically meaningful analyses of the relationships between structure and function.

Sign in / Sign up

Export Citation Format

Share Document