scholarly journals Stump Sprout Characteristics of Three Commercial Tree Species in Suriname

Forests ◽  
2020 ◽  
Vol 11 (11) ◽  
pp. 1130
Author(s):  
Donna Ramdial ◽  
Artie Sewdien ◽  
Jerry Rasdan ◽  
Shermaine Critchlow ◽  
Noraisah Tjong-A-Hung ◽  
...  
Keyword(s):  
Functional Traits ◽  
Unit Area ◽  
Selective Logging ◽  
Timber Species ◽  
Stump Sprouting ◽  
Previous Round ◽  
Access To Water ◽  
Water Contents ◽  
Stump Sprouts ◽  
Stump Diameter

We compared stump sprouting by three common timber species in Suriname on the basis of sprout origins on stumps, sprout densities, and sprout height:diameter ratios. We then compared some leaf and stem functional traits of 15–18-month-old resprouts and nearby conspecific saplings of the same height (0.5–3.5 m) but unknown age. Stumps of Dicorynia guianensis Amsh. (29–103 cm in diameter) produced the most sprouts (x = 9.2/stump), followed by the 50–71 cm diameter stumps of Eperua falcata Amsh. (10.6/stump), and the 30–78 cm diameter Qualea rosea Amsh. (5.9/stump); sprout density did not vary with stump diameter. Sprouts emerged from the lower, middle, and upper thirds of the stumps of all three species, but not from the vicinity of the exposed vascular cambium in Qualea. With increased resprout density, heights of the tallest sprout per stump tended to increase but height:diameter ratios increased only in Dicorynia. Compared to conspecific saplings, sprouts displayed higher height-diameter ratios, higher leaf-to-wood mass ratios (LWR), and lower wood densities, but did not differ in leaf mass per unit area (LMA) or leaf water contents. These acquisitive functional traits may reflect increased resprout access to water and nutrients via the extensive root system of the stump. That we did not encounter live stump sprouts from the previous round of selective logging, approximately 25 years before our study, suggests that stump sprouts in our study area grow rapidly but do not live long.

scholarly journals Northern Pin Oak Stump Sprouting Frequency on Scrub Oak Sites of Central Wisconsin

2009 ◽  
Vol 26 (2) ◽  
pp. 83-85
Author(s):  
Elijah Mujuri ◽  
Michael C. Demchik
Keyword(s):  
Quantitative Information ◽  
Scrub Oak ◽  
Stump Sprouting ◽  
Actual Contribution ◽  
Stump Sprouts ◽  
Stump Diameter

Abstract Stump sprouts are an important component of the regeneration for northern pin oak on scrub oak sites in Central Wisconsin, but there exists little quantitative information about their actual contribution. This study examines the occurrence of sprouting from northern pin oak stumps remaining after overstory removal in four stands in Central Wisconsin. On average, 85% of all stumps sprouted. Sprouting frequency diminished significantly (P < 0.0001) as stump diameter increased, but even the largest stumps sprouted at rates of 71% or better. With stump sprouting rates this high, coppice regeneration could fill much of the regeneration need for similar scrub oak sites.

scholarly journals Suitability of Hybrid Acacia Wood for Manufacturing Plywood and Particleboard

2012 ◽  
Vol 36 (2) ◽  
pp. 171-176 ◽  
Author(s):  
MM Rahaman ◽  
K Akhter ◽  
D Biswas ◽  
MW Sheikh
Keyword(s):  
Bending Strength ◽  
Unit Area ◽  
Urea Formaldehyde ◽  
Acacia Mangium ◽  
Solid Content ◽  
Timber Species ◽  
Press Temperature ◽  
Natural Crossing ◽  
Press Time ◽  
Academy Of Sciences

Hybrid acacia, produced from natural crossing between two introduced timber species Acacia mangium and A. auriculiformies has been studied for assessing the suitability of plywood and particleboard manufacture. It was found that 1.5 mm thick smooth and figured veneer can be made and dried easily. Three-ply plywood were made using veneer of this species bonded with liquid urea formaldehyde glue of 50% solid content extended with wheat flower and catalyzed (ammonium chloride) with 2% hardener under the specific pressures, viz., 1.05, 1.40 and 1.76 N/mm2 in three replications at 6 minute press time and 120°C press temperature. Dry and wet shear test were conducted on the sample and their shear load at failure per unit area and percentage of wood failure were determined. 1.76 N/mm2 pressure for the manufacture of ply wood is found to be the best. The particleboard was tested for determining the strength and dimensional stability. The bending strength passed the standard specification, tensile strength was found to be low as per Indian standard. DOI: http://dx.doi.org/10.3329/jbas.v36i2.12960 Journal of Bangladesh Academy of Sciences, Vol. 36, No. 2, 171-176, 2012

scholarly journals Stand structure and species composition of merbau in logged-over forest in Papua, Indonesia

2018 ◽  
Vol 19 (1) ◽  
pp. 163-171
Author(s):  
PRIJANTO PAMOENGKAS ◽  
ISKANDAR Z. SIREGAR ◽  
AJI NURALAM DWISUTONO
Keyword(s):  
Species Composition ◽  
Stand Structure ◽  
Selective Logging ◽  
Primary Forest ◽  
Growth Stages ◽  
Timber Species ◽  
Natural Forests ◽  
Selective Cutting ◽  
Average Value ◽  
Reference Plot

Pamoengkas P, Siregar IZ, Dwisutono AN. 2018. Stand structure and species composition of merbau in logged-over forest in Papua, Indonesia. Biodiversitas 19: 163-171. Single selective cutting is the most common form of timber extraction in natural forest in the tropics. Although, vast tracts natural forests are already logged-over, the effect of logging on the structure and species composition has been sparsely documented, especially for merbau (Intsia bijuga). Merbau is an excellent timber species and intensively harvested in Papua. The objective of this study was to analyze the structure and species composition of merbau in the several logged-over forests at different ages, i.e., 1, 5, 11, 16, 21 years old after selective logging and primary forest as the reference plot. The study was conducted in February 2016 at Sarmi District, Papua. The distributions of merbau in each plot varies but when they were compared with that in the primary forest that had reached 9.81%. Thus, the decrease of merbau trees in the plots of logged forest areas was not significant. Index of Diversity of all growth stages was high. In general, the number of merbau seedling regeneration in the study plots are above the average value standardized in Selective Cutting and Replanting System (TPTI) regulation. With regard to the condition of sapling regeneration, we concluded that selective logging might not provide enough growing space for regeneration of merbau. Providing appropriate growing space is one of the key factors to achieve adequate merbau natural regeneration.

Changes in liana community structure and functional traits along a chronosequence of selective logging in a moist semi-deciduous forest in Ghana

2019 ◽  
Vol 13 (1) ◽  
pp. 75-84
Author(s):  
Patrick Addo-Fordjour ◽  
Bismark Ofosu-Bamfo ◽  
Francis Kwofie ◽  
Nukunu Akyea-Bobi ◽  
Fidaus A. Rahman ◽  
...  
Keyword(s):  
Community Structure ◽  
Functional Traits ◽  
Deciduous Forest ◽  
Selective Logging

scholarly journals Controlling Beech Root and Stump Sprouts Using the Cut-Stump Treatment

2006 ◽  
Vol 23 (3) ◽  
pp. 155-165 ◽  
Author(s):  
Jeffrey D. Kochenderfer ◽  
James N. Kochenderfer ◽  
Gary W. Miller
Keyword(s):  
Radial Distance ◽  
Basal Area ◽  
Fagus Grandifolia ◽  
Complete Control ◽  
Growing Seasons ◽  
Control Root ◽  
Stump Sprouting ◽  
Number Of Stems ◽  
Cut Stump ◽  
Stump Sprouts

Abstract Application costs and efficacy were determined for cut-stump treatments applied to American beech (Fagus grandifolia Ehrh.) to control root and stump sprouts in central West Virginia. Glyphosate as Glypro (53.8%) was applied to the outer 2 in. of beech stumps from trees >6.0-in. dbh within 1 hour after cutting. In addition to treatment plots, individual beech stumps were treated to determine mortality patterns. The treatments were applied in early September 2001 and evaluated 12 months after treatment. A rating system ranging from 1 to 7 (0 to 100% crown affected) based on visual estimates of symptoms was used to evaluate the efficacy of the treatments. Trees with a rating of 5 (75% crown control or greater) were considered controlled. After 12 months, more than 90% of beech root sprouts ≥1-ft tall to 5.9-in. dbh on treated plots were controlled. Complete control of stump sprouting also was achieved. An average of 93 beech stems was controlled around each treated stump. Mortality around treated stumps declined as the radial distance from stumps increased and stump size decreased. Average application cost (chemical and labor) ranged from $39.43 to 62.34 per acre depending on the basal area and number of stems treated. After two growing seasons, the number of beech root sprouts on more than 90% of the treated regeneration plots remained below levels considered as interfering according to guidelines for Allegheny hardwoods. This study demonstrated that herbicide is readily translocated from the surfaces of freshly cut beech stumps via parent root systems to attached live beech stems. The cut-stump method can be applied in areas where beech is the primary species interfering with the establishment and development of desirable regeneration.

scholarly journals Trade-off strategy of leaf functional traits of desert halophyte Lycium ruthenicum in the lower reaches of Heihe River, Northwest China: response to soil moisture and salinity

2019 ◽  
Author(s):  
Shanjia Li ◽  
Wei Gou ◽  
Hui Wang ◽  
Guoqiang Wu ◽  
Peixi Su
Keyword(s):  
Soil Water ◽  
Functional Traits ◽  
Life History Strategy ◽  
Northwest China ◽  
Heihe River ◽  
Leaf Functional Traits ◽  
Trade Off ◽  
Lycium Ruthenicum ◽  
Water Contents ◽  
Soil Water Contents

Abstract Abstract Background: Understanding salinity resistance and water utilization on shrub species is a challenge to the management and conservation of desert halophytes. Lycium ruthenicum Murr.with a significant soil and water conservation capacity, is one of the dominant shrubs and halophytes in the lower reaches of the Heihe River, Northwest China. In this paper, the effects of two depths (0-40 and 40-80 cm) of soil salinities and water contents on the leaf functional traits of eight L. ruthenicum communities in different distances from the main channel were studied. Fourteen leaf water physiological and ecological stoichiometric traits were investigated, linking with soil factors to explain desert plant trade-off strategies. Results: Specific leaf volume (SLV), specific leaf area (SLA), leaf thickness (LT), nitrogen (N), C:N, C:P could serve as good indicators of drought and saline resistance. Low N, specific leaf area (SLA) indicated that the plant was located at the slow investment-return axis of the species resource utilization. Low C:N, C:P showed that L. ruthenicum had a defensive life history strategy at drought and salinity areas. The RDA results showed that 0-40 and 40-80 cm soil properties respectively explained 93.45% and 99.96% leaf traits variation. Soil water contents, HCO3- had extremely positive correlation (P<0.01) with leaf functional traits. Shallow soil water contents significantly affects P, and deeper soil water contents significantly responds C and N; shallow soil salinity significantly affected LT, C and N contents, whereas deeper soil salinity significantly affected N and SLV. Conclusions: L. ruthenicum had a foliar resource acquisition and resource conservation trade-off with a defensive life history strategy in the area of drought and salinity. This finding provides baseline information to facilitate the management and restoration of arid-saline desert ecosystem.

scholarly journals Growth and Volume of Emory Oak Coppice 10 Years After Thinning: A Case Study in Southeastern Arizona

2003 ◽  
Vol 18 (2) ◽  
pp. 77-80
Author(s):  
Peter F. Ffolliott ◽  
Mohamud H. Farah ◽  
Gerald J. Gottfried
Keyword(s):  
Structural Diversity ◽  
Wood Products ◽  
Wood Production ◽  
Oak Woodlands ◽  
Quercus Emoryi ◽  
Different Ages ◽  
Stump Sprouts ◽  
Stump Diameter

Abstract Effects of stump diameter and thinning treatments at different ages of Emory oak (Quercus emoryi) coppice (stump-sprouts) are described in terms of growth and volume of the stump-sprouts 10 yr after the thinning treatments were applied. Growth and volume of the residual stump sprouts depend largely on the number of sprouts left after thinning; the effects of stump diameter were inconsistent. Harvesting cycles for fuelwood and other wood products obtained from stump-sprouts can be shortened through coppice thinning. Structural diversity following earlier harvesting and future wood production in oak woodlands dominated by Emory oak are “optimized” by retaining three stump-sprouts after thinning. West. J. Appl. For. 18(2):77–80.

scholarly journals Effects of Stump Diameter on Sprout Number and Size for Three Oak Species in a Pennsylvania Clearcut

2009 ◽  
Vol 26 (3) ◽  
pp. 122-125 ◽  
Author(s):  
Benjamin A. Sands ◽  
Marc D. Abrams
Keyword(s):  
Maximum Height ◽  
White Oak ◽  
Diameter Class ◽  
Quercus Velutina ◽  
East Central ◽  
Central Pennsylvania ◽  
The Mean ◽  
Black Oak ◽  
Stump Sprouts ◽  
Stump Diameter

Abstract In a 2004 clearcut of a former even-aged oak (Quercus) forest, we examined the number and maximum height of stump sprouts for three oak species in east-central Pennsylvania. The greatest number of sprouts was produced by black oak (Quercus velutina) and chestnut oak (Q.montana) as compared with white oak (Q. alba). Logistic regression showed that diameter of stumps was a significant factor in determining the probability of sprouting for black oak, and an inverse relationship between stump diameter and the number of sprouts per stump was foundfor all three species. The number of white oak sprouts peaked in the 10‐20-cm diameter class and declined on larger stumps. The number of black oak sprouts peaked in the 20‐50-cm classes, and trees in the 70‐80-cm class produced the fewest sprouts. The mean annual growthof the tallest sprout on each stump was greater for black oak and chestnut oak than white oak.

scholarly journals Effects of tree diameter and some working conditions on residual stump height following selective logging – Short Communication

2018 ◽  
Vol 64 (No. 2) ◽  
pp. 91-95
Author(s):  
Behjou Farshad Keivan ◽  
Mollabashi Omid Ghaffarzadeh
Keyword(s):  
Snow Depth ◽  
Short Communication ◽  
Selective Logging ◽  
Tree Diameter ◽  
Independent Variables ◽  
The North ◽  
Site Characteristics ◽  
North Of Iran ◽  
Ground Slope ◽  
Stump Diameter

The forests in the north of Iran are located on steep terrains. The stump heights were measured in three compartments under selective management in Caspian forests. The objective of this study was to evaluate the effects of site characteristics on stump heights. The trees were felled with a Stihl chainsaw in the region. Each compartment included three slope categories (0–15, 15–30, and 30–60%) and three diameter categories (40–60, 60–80, 80–100 cm). Also, three snow depths were identified in the felling places (0–15, 15–30, and 30–45 cm) because of the felling season. The results of ANOVA test indicated that slope categories and snow depth had significant effects on stump heights (P &lt; 0.01). In addition, the results proved that the stump diameter of harvested trees had no significant effect on residual stump heights (P &gt; 0.05). Besides, there is a multiple linear relationship between stump height (dependent variable) and ground slope and snow depth as the independent variables.

Oak Stump Sprouting on Dry Sites in Northern Lower Michigan

1987 ◽  
Vol 4 (3) ◽  
pp. 142-145 ◽  
Author(s):  
Ann M. Lynch ◽  
John R. Bassett
Keyword(s):  
Site Index ◽  
Tree Age ◽  
Slope Position ◽  
White Oak ◽  
Parent Tree ◽  
Consistent Trend ◽  
Oak Trees ◽  
Stump Sprouting ◽  
Tree Stump ◽  
Stump Diameter

Abstract In clearcut portions of 37 stands, stumps from northern red, northern pin, and white oak trees, averaging about 65 years old when felled, were measured to relate sprouting to stump diameter, estimated dbh, slope position, aspect, site index, and parent tree (stump) age. At least one vigorous sprout was produced by 80 and 77% of northern red and northern pin oak stumps, respectively, and sprouting was independent of stump diameter. In contrast, 54% of white oak stumps produced at least one vigorous sprout, and sprouting was related to stump diameter. Northern red and northern pin oaks sprouted least frequently on lower slopes, whereas white oaks sprouted least frequently on midslope positions. White oak sprouting was also less frequent on south-and west-facing slopes. Sprouting of white and northern pin oaks was weakly associated with site index. The sprouting of all species was related to tree age, but only white oak showed a consistent trend of decreased sprouting with increased tree age. An average of 134 oak stumps per acre produced at least one vigorous sprout. North. J. Appl. For. 4:142-145, Sept. 1987.

Sign in / Sign up

Export Citation Format

Share Document