scholarly journals Difficulties Associated with Small-Scale Production of Carbonic Maceration Wines

Fermentation ◽  
2022 ◽  
Vol 8 (1) ◽  
pp. 27
Author(s):  
Pilar Santamaría ◽  
Lucía González-Arenzana ◽  
Rocío Escribano-Viana ◽  
Patrocinio Garijo ◽  
Rosa López ◽  
...  
Keyword(s):  
Small Volume ◽  
Small Scale ◽  
Scale Production ◽  
Anaerobic Conditions ◽  
Low Levels

The aim of the work was to study the vinification by carbonic maceration carried out in small volume tanks, because the use of these deposits is necessary in scientific studies where repetitions are mandatory. For this, vinifications were carried out in 300-kg tanks with grapes of the Tempranillo variety. We studied the development of the alcoholic and malolactic fermentations and the microorganisms responsible for them. The results showed an alteration of the wines as a result of the low levels of yeast and the huge bacteria population. This was probably due to the difficulty in maintaining the necessary temperature and anaerobic conditions in the small tanks employed.

AGRICULTURAL PRODUCTION OF CA DONG PEOPLE IN RESETTLEMENT AREA OF TRANH RIVER HYDROPOWER NUMBER 2: CURRENT SITUATION AND IMPACT FACTORS

2020 ◽  
Vol 9 (2) ◽  
Author(s):  
Bùi Thị Bích Lan
Keyword(s):  
Social Relations ◽  
Agricultural Production ◽  
Large Scale ◽  
Transition Process ◽  
Impact Factors ◽  
Small Scale ◽  
Scale Production ◽  
Technical Application ◽  
Production Models ◽  
Role Of The State

In Vietnam, the construction of hydropower projects has contributed significantly in the cause of industrialization and modernization of the country. The place where hydropower projects are built is mostly inhabited by ethnic minorities - communities that rely primarily on land, a very important source of livelihood security. In the context of the lack of common productive land in resettlement areas, the orientation for agricultural production is to promote indigenous knowledge combined with increasing scientific and technical application; shifting from small-scale production practices to large-scale commodity production. However, the research results of this article show that many obstacles in the transition process are being posed such as limitations on natural resources, traditional production thinking or the suitability and effectiveness of scientific - technical application models. When agricultural production does not ensure food security, a number of implications for people’s lives are increasingly evident, such as poverty, preserving cultural identity, social relations and resource protection. Since then, it has set the role of the State in researching and building appropriate agricultural production models to exploit local strengths and ensure sustainability.

Study of Diabetic Mellitus and Knowledge of Lotion Foot Care on the Community

2018 ◽  
Vol 9 (3) ◽  
Author(s):  
Hariyadi DM ◽  
Athiyah U ◽  
Hendradi E ◽  
Rosita N ◽  
Erawati T ◽  
...  
Keyword(s):  
Blood Glucose ◽  
T Test ◽  
Small Scale ◽  
Scale Production ◽  
Foot Care ◽  
Diabetic Mellitus ◽  
Glucose Levels ◽  
Blood Glucose Levels ◽  
Before And After ◽  
History Of

The prevention of Diabetic Mellitus (DM) and its complications is the main aim of this study, in addition to the training of lotion foot care application and the development of small scale industry. The research team delivered knowledge in the form of training on Diabetic Mellitus, healthy food, treatment and prevention of complications, and small-scale production of cosmetic products. The aim of this study was to determine the correlation between training on diabetic and lotion foot care application as preventive measures against diabetic complications on the patient's blood glucose levels in the community of residents in Banyuurip Jaya, Surabaya. It was expected from this training that the knowledge of the residents increases and people living with diabetic undergo lifestyle changes and therefore blood sugar levels can be controlled. The parameters measured in this research were blood glucose levels, the anti diabetic drug types consumed, and compliance on diabetics. This study used the data taken from 60 patients with DM over a period of one month. Questionnaires and log books was used to retrieve data and changes in blood glucose levels in diabetic patients. The results showed the demographic data of patients with type 2 diabetic of 85% female and 15% male, with the range of patients aged of 61-70 years of 46.67% and had history of diabetic (90%). The history of drugs consumed by respondents was anti diabetic drugs such as metformin (40%), glimepiride (33.37%) and insulin (6.67%). In addition, the increased knowledge of DM patients after being given the training compared to before training was shown in several questions in the questionnaire. A statistical analysis using t-test analyzed a correlation between training provided in order to enhance understanding of the patient, as well as correlation with blood glucose levels. A paired T-test showed that there was a relationship between the knowledge of trainees before and after training (p less than 0.05). An interesting result was that there was no relationship between blood glucose levels before and after training provided (p> 0.05).

Planning Micronutrient-Dense Menus in Ontario Long-Term Care Homes: Strategies and Challenges

2020 ◽  
Vol 81 (4) ◽  
pp. 198-203
Author(s):  
Lisa M. Duizer ◽  
Heather H. Keller
Keyword(s):  
Small Volume ◽  
Long Term Care ◽  
Term Care ◽  
Dietary Reference Intakes ◽  
Portion Sizes ◽  
Calcium Magnesium ◽  
Micronutrient Malnutrition ◽  
Low Levels ◽  
Food Consumed

Prevalence of micronutrient malnutrition is high in individuals living in long-term care (LTC) homes with many individuals consuming low levels of vitamins B6, D, and E; folate; calcium; magnesium; and zinc. The focus of this research was to identify strategies and challenges encountered during development of micronutrient-dense menus for use in Ontario LTC homes and to examine costs associated with development of a menu with acceptable micronutrients. Semi-structured open-ended interviews were conducted with 13 menu planners (7 dietitians, 6 nutrition managers) in diverse LTC homes in Ontario. Data were thematically analyzed. A 7-day hypothetical menu meeting all nutrient requirements was developed and costed. Analysis of the interview data showed that menus are planned according to the Canada’s Food Guide (2007) and focus placed on Dietary Reference Intakes of protein, fibre, calcium, and sodium. Little focus is placed on micronutrients. Flexibility in foods offered was important to accommodate the small volume of food consumed. Resident preferences were balanced against nutritional requirements. Challenges included planning for diverse populations, managing portion sizes, and balancing the budget. A hypothetical menu planned to contain adequate levels of all micronutrients is 49% higher in food costs than the amount currently provided to Ontario LTC homes.

scholarly journals Technical basis for the small-scale production of black soldier fly, Hermetia illucens (L. 1758), meal as fish feed in Benin

2021 ◽  
Vol 4 ◽  
pp. 100153
Author(s):  
Armel Gougbedji ◽  
Pamphile Agbohessou ◽  
Philippe A. Lalèyè ◽  
Frédéric Francis ◽  
Rudy Caparros Megido
Keyword(s):  
Small Scale ◽  
Fish Feed ◽  
Scale Production ◽  
Black Soldier Fly ◽  
Hermetia Illucens ◽  
Technical Basis

scholarly journals Development of a Nationwide, Low-Level Wind Shear Mosaic in France

2013 ◽  
Vol 28 (5) ◽  
pp. 1241-1260 ◽  
Author(s):  
Clotilde Augros ◽  
Pierre Tabary ◽  
Adrien Anquez ◽  
Jean-Marc Moisselin ◽  
Pascal Brovelli ◽  
...  
Keyword(s):  
Wind Shear ◽  
Propagation Speed ◽  
Horizontal Wind ◽  
Small Scale ◽  
Wind Gust ◽  
Density Currents ◽  
Use Of Data ◽  
Low Levels ◽  
Cell Propagation ◽  
Convective Cells

Abstract An algorithm for the detection of horizontal wind shear at low levels was developed. The algorithm makes use of data collected by all radars from the Application Radar à la Météorologie Infra-Synoptique (ARAMIS) operational network, in order to build a complete mosaic of wind shear over metropolitan France. The product provides an estimation of the maximum horizontal wind shear detected in the low levels, between 0 and 2 km AGL. Examination of the wind shear mosaic for different cases shows that the product is able to retrieve small-scale wind shear signatures that can be linked to either convergence lines ahead of convective cells, which are indicative of gust fronts, or strong convergence areas inside intense cells. A statistical evaluation of the wind shear mosaic was performed, by comparing horizontal wind shear observed inside the area defined by convective objects with wind gusts recorded along their trajectory by weather stations. A link between those different observations was clearly established. Therefore, the use of wind shear for wind gust prediction was tested in combination with other parameters: an estimation of the energetic potential of density currents, the cell surface with reflectivity over 51 dBZ, relative helicity, and cell propagation speed. Different wind gust warning rules were tested on 468 convection nowcasting objects (CONOs). The results clearly highlighted the benefits of using wind shear for wind gust estimation, and also demonstrated the improvement in forecasting skill when combining different parameters. The wind shear mosaic will be produced operationally before the end of 2013 and will be used to improve wind gust warnings provided to end users.

Environmental assessment of small-scale production of wood chips as a fuel for residential heating boilers

2014 ◽  
Vol 62 ◽  
pp. 106-115 ◽  
Author(s):  
Bernat Esteban ◽  
Jordi-Roger Riba ◽  
Grau Baquero ◽  
Rita Puig ◽  
Antoni Rius
Keyword(s):  
Environmental Assessment ◽  
Wood Chips ◽  
Small Scale ◽  
Scale Production ◽  
Residential Heating

scholarly journals Fabrication Techniques for Graphene Oxide-Based Molecular Separation Membranes: Towards Industrial Application

Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 757
Author(s):  
Ohchan Kwon ◽  
Yunkyu Choi ◽  
Eunji Choi ◽  
Minsu Kim ◽  
Yun Chul Woo ◽  
...  
Keyword(s):  
Graphene Oxide ◽  
Large Scale ◽  
Spray Coating ◽  
Dip Coating ◽  
Small Scale ◽  
Scale Production ◽  
Separation Membranes ◽  
Current Review ◽  
Slot Die ◽  
Continuous Fabrication

Graphene oxide (GO) has been a prized material for fabricating separation membranes due to its immense potential and unique chemistry. Despite the academic focus on GO, the adoption of GO membranes in industry remains elusive. One of the challenges at hand for commercializing GO membranes lies with large-scale production techniques. Fortunately, emerging studies have acknowledged this issue, where many have aimed to deliver insights into scalable approaches showing potential to be employed in the commercial domain. The current review highlights eight physical methods for GO membrane fabrication. Based on batch-unit or continuous fabrication, we have further classified the techniques into five small-scale (vacuum filtration, pressure-assisted filtration, spin coating, dip coating, drop-casting) and three large-scale (spray coating, bar/doctor blade coating, slot die coating) approaches. The continuous nature of the large-scale approach implies that the GO membranes prepared by this method are less restricted by the equipment’s dimensions but rather the availability of the material, whereas membranes yielded by small-scale methods are predominately limited by the size of the fabrication device. The current review aims to serve as an initial reference to provide a technical overview of preparing GO membranes. We further aim to shift the focus of the audience towards scalable processes and their prospect, which will facilitate the commercialization of GO membranes.

A METHOD FOR PREPARING 4,4'-DIAMINODIPHENYL ETHER AND 4,4'-DIAMINODIPHENYL ETHER OF RESORCINOL IN THE CONDITIONS OF SMALL-SCALE PRODUCTION

2019 ◽  
pp. 14-27
Author(s):  
Galina Mikhailovna Komissarova ◽  
Eduard Leonidovich Belyaev ◽  
Mikhail Kirillovich Smirnov ◽  
Lyudmila Alekseevna Sokhadze ◽  
Vitaliy Valer'yevich Turygin ◽  
...  
Keyword(s):  
Small Scale ◽  
Scale Production

DYNAMIC MODEL OF COMBINED AGGREGATION OF ADDITIVE MANUFACTURING PROCESS

2021 ◽  
Author(s):  
A. V. Vinnichenko ◽  
Keyword(s):  
Mathematical Modeling ◽  
Additive Manufacturing ◽  
Process Model ◽  
Additive Technologies ◽  
Additive Models ◽  
Small Scale ◽  
Scale Production ◽  
Flexible Production ◽  
Optimization Criteria ◽  
Production Resources

The paper presents methods and approaches for mathematical modeling and rationalization of flexible additive manufacturing, as well as other processes by which it is possible to create additive models for their integration into the system of experimental or pilot production. The work has also formed and synthesized a process model, which includes flexible production indicators, service indicators, and a developed criterion base for their assessment. The work takes into account the optimization criteria, as well as maximizing and minimizing risks for additive manufacturing, taking into account the possible risk component when deploying new processes for experimental and small-scale production. The models and methods described in the article will make it possible to carry out mathematical modeling and subsequent improvements for the flexible production process using additive technologies, used as a means of achieving the rational use of existing production resources within the framework of existing scientific and production complexes.

Sign in / Sign up

Export Citation Format

Share Document