scholarly journals Numerical Simulation of Velocity Field around Two Columns of Tandem Piers of the Longitudinal Bridge

Fluids ◽  
2020 ◽  
Vol 5 (1) ◽  
pp. 32
Author(s):  
Hongliang Qi ◽  
Junxing Zheng ◽  
Chenguang Zhang
Keyword(s):  
Fluid Dynamics ◽  
Numerical Simulation ◽  
Computational Fluid Dynamics ◽  
Velocity Field ◽  
Average Velocity ◽  
Cfd Simulations ◽  
Velocity Change ◽  
River Bed ◽  
Computational Fluid Dynamics Cfd ◽  
Lateral Range

This research explores the effects of different spans of two columns of tandem piers on the characteristics of x-velocity near the river bed based on computational fluid dynamics (CFD) simulations. With a span shorter than 27.5D (D is the diameter of piers), the shape and the lateral range of the x-velocity increases with the increase of distance downwards the x-direction. For the area between the tandem piers and the wall, the VRi/VR1 (the ratio of the x-velocity at the i-th row to the x-velocity of the first row in each model) near the wall increases up to 1.26. For the area between the two columns of tandem piers, the profile of VRi/VR1 changes from a “∩-shape” to an “M-shape” in each model. RAVC (average velocity change ratio) of different spans increases gradually and tends to be stable with the increases of the span. The largest RAVC is about −17.66% with a span of 0.52 m. The RMV (the ratio of the maximum x-velocity among piers in each row in different models to the maximum x-velocity of the two piers arranged side by side) of piers in the first row of different models is around 0.95. The RMV becomes 0.82 at the second pier in each model when the span is shorter than 27.5D, and increases to 0.91 if the span is longer than 27.5D. If the span is longer than 27.5D, the RMV of different piers are close to each other from the 2nd pier to the last one.

3D Numerical Simulation of Inner Flow in a Mixed-Flow Stirred Reactor

2014 ◽  
Vol 602-605 ◽  
pp. 650-652
Author(s):  
Hui Li ◽  
Rui Li Wang
Keyword(s):  
Fluid Dynamics ◽  
Numerical Simulation ◽  
Computational Fluid Dynamics ◽  
Velocity Field ◽  
Three Dimensional ◽  
3D Numerical Simulation ◽  
Mixed Flow ◽  
Stirred Reactor ◽  
Computational Fluid Dynamics Cfd ◽  
Simulated Effect

Based on the principle and method of computational fluid dynamics (CFD), using the software, FLUENT, the inner flow field in a mixed-flow stirred reactor was simulated and the flow details were studied roundly. This article analyzed the three-dimensional velocity field distribution and testified the reliability of numerical simulation to a certain extent. The simulated effect was proved effective. The results of this paper provided a good base and reference for the further research of the stirred reactor.

Steel Catenary Risers at Touchdown Zone: A Fluid Dynamics Approach to Understanding the Water-Riser-Soil Interaction

2012 ◽  
Author(s):  
Anup Fouzder ◽  
Arash Zakeri ◽  
Bipul Hawlader
Keyword(s):  
Fluid Dynamics ◽  
Numerical Simulation ◽  
Computational Fluid Dynamics ◽  
Velocity Field ◽  
Cross Section ◽  
Complex Phenomenon ◽  
Two Dimensional ◽  
Steel Catenary Risers ◽  
Computational Fluid Dynamics Cfd ◽  
Critical Location

The critical location for fatigue damage in Steel Catenary Riser’s (SCR’s) often occurs within the Touchdown Zone (TDZ), where cyclic interaction of the riser with the seabed takes place. Riser-fluid-soil interaction at the TDZ is a complex phenomenon. In this study, Computational Fluid Dynamics (CFD) technique is used to investigate the velocity field and suction forces during riser-fluid-soil interaction for a two-dimensional cross section of 0.10 m diameter SCR at TDZ. Numerical simulation shows that the suction forces at the bottom of the riser are high enough to pull the clay upward when it departs from the seabed during the heave action. The influence of suction and water on trench formation mechanism is discussed.

scholarly journals Rapid pivot feeding in pipefish: flow effects on prey and evaluation of simple dynamic modelling via computational fluid dynamics

2008 ◽  
Vol 5 (28) ◽  
pp. 1291-1301 ◽  
Author(s):  
Sam Van Wassenbergh ◽  
Peter Aerts
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Analytical Model ◽  
Dynamic Modelling ◽  
Head Rotation ◽  
Theoretical Models ◽  
Cfd Simulations ◽  
Deceleration Phase ◽  
Computational Fluid Dynamics Cfd ◽  
Flow Effects

Most theoretical models of unsteady aquatic movement in organisms assume that including steady-state drag force and added mass approximates the hydrodynamic force exerted on an organism's body. However, animals often perform explosively quick movements where high accelerations are realized in a few milliseconds and are followed closely by rapid decelerations. For such highly unsteady movements, the accuracy of this modelling approach may be limited. This type of movement can be found during pivot feeding in pipefish that abruptly rotate their head and snout towards prey. We used computational fluid dynamics (CFD) to validate a simple analytical model of cranial rotation in pipefish. CFD simulations also allowed us to assess prey displacement by head rotation. CFD showed that the analytical model accurately calculates the forces exerted on the pipefish. Although the initial phase of acceleration changes the flow patterns during the subsequent deceleration phase, the accuracy of the analytical model was not reduced during this deceleration phase. Our analysis also showed that prey are left approximately stationary despite the quickly approaching pipefish snout. This suggests that pivot-feeding fish need little or no suction to compensate for the effects of the flow induced by cranial rotation.

scholarly journals Effect of hydraulic and geometric factors upon leakage flow rate in pressurized pipes

RBRH ◽  
2021 ◽  
Vol 26 ◽  
Author(s):  
Mayara Francisca da Silva ◽  
Fábio Veríssimo Gonçalves ◽  
Johannes Gérson Janzen
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Flow Rate ◽  
Leakage Flow ◽  
Cfd Simulations ◽  
Mean Velocity ◽  
Leakage Flow Rate ◽  
Geometric Factors ◽  
Leakage Area ◽  
Computational Fluid Dynamics Cfd

ABSTRACT Computational Fluid Dynamics (CFD) simulations of a leakage in a pressurized pipe were undertaken to determine the empirical effects of hydraulic and geometric factors on the leakage flow rate. The results showed that pressure, leakage area and leakage form, influenced the leakage flow rate significantly, while pipe thickness and mean velocity did not influence the leakage flow rate. With relation to the interactions, the effect of pressure upon leakage flow rate depends on leakage area, being stronger for great leakage areas; the effects of leakage area and pressure on leakage flow rate is more pronounced for longitudinal leakages than for circular leakages. Finally, our results suggest that the equations that predict leakage flow rate in pressurized pipes may need a revision.

scholarly journals The Aerodynamics of a Diabolo

2021 ◽  
Author(s):  
Darren Jia
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Angular Momentum ◽  
Flow Pattern ◽  
High Spin ◽  
Angular Speed ◽  
Geometric Shape ◽  
Cfd Simulations ◽  
Resistive Torque ◽  
Computational Fluid Dynamics Cfd

Diabolo is a popular game in which the object can be spun at up to speeds of 5000 rpm. This high spin velocity gives the diabolo the necessary angular momentum to remain stable. The shape of the diabolo generates an interesting air flow pattern. The viscous air applies a resistive torque on the fast spinning diabolo. Through computational fluid dynamics (CFD) simulations it's shown that the resistive torque has an interesting dependence on the angular speed of the diabolo. Further, the geometric shape of the diabolo affects the dependence of torque on angular speed.

scholarly journals Comparison of Blade Element Method and CFD Simulations of a 10 MW Wind Turbine

Fluids ◽  
2018 ◽  
Vol 3 (4) ◽  
pp. 73 ◽  
Author(s):  
Galih Bangga
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Flow Separation ◽  
Spatial Interpolation ◽  
Flow Conditions ◽  
Cfd Simulations ◽  
Computational Fluid Dynamics Cfd ◽  
Correction Terms ◽  
Selection Of ◽  
Blade Element

The present studies deliver the computational investigations of a 10 MW turbine with a diameter of 205.8 m developed within the framework of the AVATAR (Advanced Aerodynamic Tools for Large Rotors) project. The simulations were carried out using two methods with different fidelity levels, namely the computational fluid dynamics (CFD) and blade element and momentum (BEM) approaches. For this purpose, a new BEM code namely B-GO was developed employing several correction terms and three different polar and spatial interpolation options. Several flow conditions were considered in the simulations, ranging from the design condition to the off-design condition where massive flow separation takes place, challenging the validity of the BEM approach. An excellent agreement is obtained between the BEM computations and the 3D CFD results for all blade regions, even when massive flow separation occurs on the blade inboard area. The results demonstrate that the selection of the polar data can influence the accuracy of the BEM results significantly, where the 3D polar datasets extracted from the CFD simulations are considered the best. The BEM prediction depends on the interpolation order and the blade segment discretization.

scholarly journals Investigation of Influence of Adjustments in Cyclist Arm Position on Aerodynamic Drag Using Computational Fluid Dynamics

Proceedings ◽  
2020 ◽  
Vol 49 (1) ◽  
pp. 159
Author(s):  
Knut Erik Teigen Giljarhus ◽  
Daniel Årrestad Stave ◽  
Luca Oggiano
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Aerodynamic Drag ◽  
Time Trial ◽  
Elbow Extension ◽  
Cfd Simulations ◽  
Arm Position ◽  
Sport Activities ◽  
The Face ◽  
Computational Fluid Dynamics Cfd

In professional cycling, even small adjustments in position could mean that valuable seconds are gained over the course of a time-trial race. This study investigates the influence of arm position on the aerodynamic drag of a cyclist. Based on a 3D scanned model of a professional cyclist, 64 alternate positions are generated. The parameters that are investigated are the distance between elbows, elbow extension, and distance between hands. Computational fluid dynamics (CFD) simulations of all positions are performed, and a regression model is built from the results. The results indicate that the optimal posture is achieved for a minimum in all investigated parameters, which means that the hands and elbows should be kept together with hands up towards the face. Furthermore, elbow extension seems to be the most crucial parameter, followed by the distance between elbows, and then by the distance between the hands. The presented methodology can be applied to study other parameters relevant to cycling aerodynamics or be applied to other sport activities as well.

Sign in / Sign up

Export Citation Format

Share Document