scholarly journals Advanced Methods for the Characterization of Supramolecular Hydrogels

Gels ◽  
2021 ◽  
Vol 7 (4) ◽  
pp. 158
Author(s):  
Bridget R. Denzer ◽  
Rachel J. Kulchar ◽  
Richard B. Huang ◽  
Jennifer Patterson

With the increased research on supramolecular hydrogels, many spectroscopic, diffraction, microscopic, and rheological techniques have been employed to better understand and characterize the material properties of these hydrogels. Specifically, spectroscopic methods are used to characterize the structure of supramolecular hydrogels on the atomic and molecular scales. Diffraction techniques rely on measurements of crystallinity and help in analyzing the structure of supramolecular hydrogels, whereas microscopy allows researchers to inspect these hydrogels at high resolution and acquire a deeper understanding of the morphology and structure of the materials. Furthermore, mechanical characterization is also important for the application of supramolecular hydrogels in different fields. This can be achieved through atomic force microscopy measurements where a probe interacts with the surface of the material. Additionally, rheological characterization can investigate the stiffness as well as the shear-thinning and self-healing properties of the hydrogels. Further, mechanical and surface characterization can be performed by micro-rheology, dynamic light scattering, and tribology methods, among others. In this review, we highlight state-of-the-art techniques for these different characterization methods, focusing on examples where they have been applied to supramolecular hydrogels, and we also provide future directions for research on the various strategies used to analyze this promising type of material.

1996 ◽  
Vol 11 (1) ◽  
pp. 63-71 ◽  
Author(s):  
A. Ureña ◽  
J. M. Gómez de Salazar ◽  
J. J. Martín ◽  
J. Quiñones

This paper describes a new application of two complementary surface characterization techniques to study solid-state bonding in an Al–Li alloy. Through the two mentioned techniques, Atomic Force Microscopy (AFM) and Secondary Ion Mass Spectrometry (SIMS), important findings about what takes place in the bond interface have been determined. These findings enclose both the formation of discontinuous mixed oxides and the evolution of Li through the bond line and into theadjacent diffusion affected zones. Homogenization of Li and Cu alloyelements has been detected even in those cases where a metallic interlayer was used to favor the union.


Author(s):  
José M. Barandiarán ◽  
Iñaki Orue ◽  
M.L. Fdez-Gubieda ◽  
A. García Prieto

e-Polymers ◽  
2012 ◽  
Vol 12 (1) ◽  
Author(s):  
Zdenka Kolská ◽  
Alena Řezníčková ◽  
Václav Švorčík

AbstractElectrokinetic potential (zeta potential) for selected 21 polymer foils was studied. The results on zeta potential are supplemented with contact angle measurements (goniometry) and with the results on surface roughness measured by atomic force microscopy (AFM). Zeta potential was determined using two approaches: streaming current and streaming potential at pH=6.0-6.2. Two electrolyte solutions with KCl (concentrations 0.001 and 0.005 mol/dm3) and KNO3 (0.001 mol/dm3) were used in the experiments. Zeta potential was shown to depend on surface chemistry, polarity, roughness and morphology of the polymer foils.


2005 ◽  
Vol 277-279 ◽  
pp. 972-976
Author(s):  
Jang Hee Yoon ◽  
Yoon Bo Shim ◽  
Chae Ryong Cho ◽  
Mi Sook Won

In this study, ZnO and CuO doped zinc oxide thin films were cathodically deposited in aqueous zinc chloride solutions in the presence of oxygen on a Pt/Ti/SiO2/Si substrate through an electrochemical reaction. A mercurous sulfate electrode was used as a reference electrode and the counter electrode was a Pt spiral wire. Deposition was carried out in solutions containing Zn2+ ions introduced as ZnCl2 salt at concentrations ranging from 5.0 x 10-4 to 5.0 x 10-2 M. The bath temperatures were controlled from 65°C to 80°C. The oxygen gas was introduced from argon/oxygen mixtures allowing its partial pressure to be fixed along with its concentration in the solution. Doping of CuO was carried out in cupric nitrate or a cupric chloride/0.1M KCl solution. The influence of the Cu/Zn concentration, deposition temperature of a solution, applied cathodic potential and deposition time were optimized. After the potential was applied, the cathodic current reached a steady state within 5 min. The composition, and the characterization of the surface of the films were investigated through X-ray diffractometry, X-ray photoelectron spectroscopy, atomic force microscopy and scanning electron microscopy.


Sign in / Sign up

Export Citation Format

Share Document