scholarly journals An In Vitro Evaluation of the Biological and Osteogenic Properties of Magnesium-Doped Bioactive Glasses for Application in Bone Tissue Engineering

2021 ◽  
Vol 22 (23) ◽  
pp. 12703
Author(s):  
Frederike Hohenbild ◽  
Marcela Arango Ospina ◽  
Sarah I. Schmitz ◽  
Arash Moghaddam ◽  
Aldo R. Boccaccini ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Osteogenic Differentiation ◽  
Bone Tissue ◽  
Differentiation Markers ◽  
Bioactive Glasses ◽  
Ecm Proteins ◽  
Expression Of Genes ◽  
Genes Encoding

Magnesium (Mg2+) is known to play a crucial role in mineral and matrix metabolism of bone tissue and is thus increasingly considered in the field of bone tissue engineering. Bioactive glasses (BGs) offer the promising possibility of the incorporation and local delivery of therapeutically active ions as Mg2+. In this study, two Mg2+-doped derivatives of the ICIE16-BG composition (49.46 SiO2, 36.27 CaO, 6.6 Na2O, 1.07 P2O5, 6.6 K2O (mol%)), namely 6Mg-BG (49.46 SiO2, 30.27 CaO, 6.6 Na2O, 1.07 P2O5, 6.6 K2O, 6.0 MgO (mol%) and 3Mg-BG (49.46 SiO2, 33.27 CaO, 6.6 Na2O, 1.07 P2O5, 6.6 K2O, 3.0 MgO (mol%)) were examined. Their influence on viability, proliferation and osteogenic differentiation of human mesenchymal stromal cells (MSCs) was explored in comparison to the original ICIE16-BG. All BGs showed good biocompatibility. The Mg2+-doped BGs had a positive influence on MSC viability alongside with inhibiting effects on MSC proliferation. A strong induction of osteogenic differentiation markers was observed, with the Mg2+-doped BGs significantly outperforming the ICIE16-BG regarding the expression of genes encoding for protein members of the osseous extracellular matrix (ECM) at certain observation time points. However, an overall Mg2+-induced enhancement of the expression of genes encoding for ECM proteins could not be observed, possibly due to a too moderate Mg2+ release. By adaption of the Mg2+ release from BGs, an even stronger impact on the expression of genes encoding for ECM proteins might be achieved. Furthermore, other BG-types such as mesoporous BGs might provide a higher local presence of the therapeutically active ions and should therefore be considered for upcoming studies.

scholarly journals Cuttlefish Bone-Derived Biphasic Calcium Phosphate Scaffolds Coated with Sol-Gel Derived Bioactive Glass

Materials ◽  
2019 ◽  
Vol 12 (17) ◽  
pp. 2711
Author(s):  
Ana S. Neto ◽  
Daniela Brazete ◽  
José M.F. Ferreira
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Calcium Phosphates ◽  
Sol Gel ◽  
Biological Properties ◽  
X Ray Diffraction ◽  
Bioactive Glasses ◽  
Hydrothermal Transformation

The combination of calcium phosphates with bioactive glasses (BG) has received an increased interest in the field of bone tissue engineering. In the present work, biphasic calcium phosphates (BCP) obtained by hydrothermal transformation of cuttlefish bone (CB) were coated with a Sr-, Mg- and Zn-doped sol-gel derived BG. The scaffolds were characterized by X-ray diffraction, Fourier transform infrared spectroscopy and scanning electron microscopy. The initial CB structure was maintained after hydrothermal transformation (HT) and the scaffold functionalization did not jeopardize the internal structure. The results of the in-vitro bioactivity after immersing the BG coated scaffolds in simulated body fluid (SBF) for 15 days showed the formation of apatite on the surface of the scaffolds. Overall, the functionalized CB derived BCP scaffolds revealed promising properties, but further assessment of the in-vitro biological properties is needed before being considered for their use in bone tissue engineering applications.

scholarly journals Biomechanical study of cellulose scaffolds for bone tissue engineering in vivo and in vitro.

2021 ◽  
Author(s):  
Maxime Leblanc Latour ◽  
Maryam Tarar ◽  
Ryan J. Hickey ◽  
Charles M. Cuerrier ◽  
Isabelle Catelas ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Osteogenic Differentiation ◽  
Bone Tissue ◽  
Cell Invasion ◽  
Osteogenic Potential ◽  
Load Bearing

Plant-derived cellulose biomaterials have recently been utilized in several tissue engineering applications. These naturally-derived cellulose scaffolds have been shown to be highly biocompatible in vivo, possess structural features of relevance to several tissues, and support mammalian cell invasion and proliferation. Recent work utilizing decellularized apple hypanthium tissue has shown that it possesses a pore size similar to trabecular bone and can successfully host osteogenic differentiation. In the present study, we further examined the potential of apple-derived cellulose scaffolds for bone tissue engineering (BTE) and analyzed their mechanical properties in vitro and in vivo. MC3T3-E1 pre-osteoblasts were seeded in cellulose scaffolds. Following chemically-induced osteogenic differentiation, scaffolds were evaluated for mineralization and for their mechanical properties. Alkaline phosphatase and Alizarin Red staining confirmed the osteogenic potential of the scaffolds. Histological analysis of the constructs revealed cell invasion and mineralization throughout the constructs. Furthermore, scanning electron microscopy demonstrated the presence of mineral aggregates on the scaffolds after culture in differentiation medium, and energy-dispersive spectroscopy confirmed the presence of phosphate and calcium. However, although the Young′s modulus significantly increased after cell differentiation, it remained lower than that of healthy bone tissue. Interestingly, mechanical assessment of acellular scaffolds implanted in rat calvaria defects for 8 weeks revealed that the force required to push out the scaffolds from the surrounding bone was similar to that of native calvarial bone. In addition, cell infiltration and extracellular matrix deposition were visible within the implanted scaffolds. Overall, our results confirm that plant-derived cellulose is a promising candidate for BTE applications. However, the discrepancy in mechanical properties between the mineralized scaffolds and healthy bone tissue may limit their use to low load-bearing applications. Further structural re-engineering and optimization to improve the mechanical properties may be required for load-bearing applications.

Structure and in vitro dissolution of Mg and Sr containing borosilicate bioactive glasses for bone tissue engineering

2020 ◽  
Vol 533 ◽  
pp. 119893 ◽  
Author(s):  
J.M. Tainio ◽  
D.A. Avila Salazar ◽  
A. Nommeots-Nomm ◽  
C. Roiland ◽  
B. Bureau ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
In Vitro Dissolution ◽  
Bioactive Glasses

Extracellular matrix-inspired BMP-2-delivering biodegradable fibrous particles for bone tissue engineering

2015 ◽  
Vol 3 (42) ◽  
pp. 8375-8382 ◽  
Author(s):  
Young Min Shin ◽  
Wan-Geun La ◽  
Min Suk Lee ◽  
Hee Seok Yang ◽  
Youn-Mook Lim
Keyword(s):  
Tissue Engineering ◽  
Extracellular Matrix ◽  
Bone Tissue Engineering ◽  
Osteogenic Differentiation ◽  
Bone Tissue ◽  
Bone Defect

A heparin conjugated fibrous particle resembling the structure of an extracellular matrix was developed. The BMP-2 loaded particles promoted osteogenic differentiation and healing of a bone defect, in vitro and in vivo.

scholarly journals Cuttlefish Bone-Derived Biphasic Calcium Phosphate Scaffolds Coated with Sol-Gel Derived Bioactive Glass

2019 ◽  
Author(s):  
Ana S. Neto ◽  
Daniela Brazete ◽  
José M.F. Ferreira
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Calcium Phosphates ◽  
Sol Gel ◽  
X Ray Diffraction ◽  
Bioactive Glasses ◽  
X Ray ◽  
Hydrothermal Transformation

The combination of calcium phosphates (CaP) with bioactive glasses (BG) has received an increased interest in the field of bone tissue engineering. In the present work, biphasic calcium phosphates (BCP) obtained by hydrothermal transformation (HT) of cuttlefish bone (CB) were coated with a Sr-, Mg- and Zn-doped sol-gel derived BG. The scaffolds were characterized by X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). The initial CB structure was maintained after HT and the scaffold functionalization did not jeopardize the internal structure. The results of in vitro bio-mineralization after immersing the BG coated scaffolds in simulated body fluid (SBF) showed extensive formation of bone-like apatite onto the surface of the scaffolds. Overall, the functionalized CB derived BCP scaffolds revealed promising properties for their use in bone tissue engineering field.

scholarly journals La-Doped mesoporous calcium silicate/chitosan scaffolds for bone tissue engineering

2019 ◽  
Vol 7 (4) ◽  
pp. 1565-1573 ◽  
Author(s):  
Xiao-Yuan Peng ◽  
Min Hu ◽  
Fang Liao ◽  
Fan Yang ◽  
Qin-Fei Ke ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Bone Regeneration ◽  
Osteogenic Differentiation ◽  
Bone Tissue ◽  
Calcium Silicate ◽  
Chitosan Scaffolds ◽  
La Doped

La-MCS/CTS scaffolds promoted the proliferation and osteogenic differentiation of rBMSCs in vitro and bone regeneration in vivo.

scholarly journals In vitro evaluation of novel low-pressure spark plasma sintered HA–BG composite scaffolds for bone tissue engineering

RSC Advances ◽  
2020 ◽  
Vol 10 (40) ◽  
pp. 23813-23828
Author(s):  
Muhammad Rizwan ◽  
Krishnamurithy Genasan ◽  
Malliga Raman Murali ◽  
Hanumantha Rao Balaji Raghavendran ◽  
Rodianah Alias ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Bone Tissue Engineering ◽  
Osteogenic Differentiation ◽  
Bone Tissue ◽  
Composite Scaffold ◽  
Composite Scaffolds ◽  
In Vitro Evaluation ◽  
Monocyte Migration ◽  
Spark Plasma

HB 30 S composite scaffold inhibits Staphylococcus spp., supports the biocompatibility and osteogenic differentiation of hBMSCs and resists monocyte migration.

Sign in / Sign up

Export Citation Format

Share Document