scholarly journals Virtual Diagnostic Suite for Electron Beam Prediction and Control at FACET-II

Information ◽  
2021 ◽  
Vol 12 (2) ◽  
pp. 61
Author(s):  
Claudio Emma ◽  
Auralee Edelen ◽  
Adi Hanuka ◽  
Brendan O’Shea ◽  
Alexander Scheinker
Keyword(s):  
Beam Quality ◽  
Simulation Data ◽  
Transverse Beam ◽  
Spectral Reconstruction ◽  
Edge Radiation ◽  
Measurement Results ◽  
Prediction And Control ◽  
The Stability ◽  
And Control ◽  
Non Destructive

We discuss the implementation of a suite of virtual diagnostics at the FACET-II facility currently under commissioning at SLAC National Accelerator Laboratory. The diagnostics will be used for the prediction of the longitudinal phase space along the linac, spectral reconstruction of the bunch profile, and non-destructive inference of transverse beam quality (emittance) while using edge radiation at the injector dogleg and bunch compressor locations. These measurements will be folded into adaptive feedbacks and Machine Learning (ML)-based reinforcement learning controls to improve the stability and optimize the performance of the machine for different experimental configurations. In this paper we describe each of these diagnostics with expected measurement results that are based on simulation data and discuss progress towards implementation in regular operations.

scholarly journals Virtual Diagnostic Suite for Electron Beam Prediction and Control at FACET-II

2021 ◽  
Author(s):  
Claudio Emma ◽  
Auralee Edelen ◽  
Adi Hanuk ◽  
Brendan O'Shea ◽  
Alexander Scheinker
Keyword(s):  
Beam Quality ◽  
Simulation Data ◽  
Transverse Beam ◽  
Spectral Reconstruction ◽  
Edge Radiation ◽  
Measurement Results ◽  
Prediction And Control ◽  
The Stability ◽  
And Control ◽  
Non Destructive

We discuss the implementation of a suite of virtual diagnostics at the FACET-II facility currently under commissioning at SLAC National Accelerator Laboratory. The diagnostics will be used for prediction of the longitudinal phase space along the linac, spectral reconstruction of the bunch profile and non-destructive inference of transverse beam quality (emittance) using edge radiation at the injector dogleg and bunch compressor locations. These measurements will be folded in to adaptive feedbacks and ML-based reinforcement learning controls to improve the stability and optimize the performance of the machine for different experimental configurations. In this paper we describe each of these diagnostics with expected measurement results based on simulation data and discuss progress towards implementation in regular operations.

An investigation of the flight dynamic characteristics of gyroplanes by use of flight tests

2004 ◽  
Vol 108 (1088) ◽  
pp. 531-535
Author(s):  
V. M. Spathopoulos
Keyword(s):  
Flight Test ◽  
Accident Rate ◽  
Simulation Data ◽  
Stable Mode ◽  
Stability And Control ◽  
Centre Of Gravity ◽  
Limited Application ◽  
The Stability ◽  
And Control ◽  
Rotary Wing

AbstractAn analysis is presented both of flight test and simulation data obtained from a gyroplane aircraft. This class of rotary-wing vehicle has found limited application in areas other than recreational flying, however the accident rate has been such that it has prompted the study of the configuration’s stability and control characteristics. It is concluded that the flight dynamic response of the gyroplane examined is dominated by a fast, non-stable mode, affecting all states and thus increasing pilot workload. Simulation results indicate that the position of the centre of gravity significantly influences the stability of this mode.

Development of reference materials with the composition of propyl and isopropyl alcohol solutions

2020 ◽  
pp. 66-72
Author(s):  
Irina A. Piterskikh ◽  
Svetlana V. Vikhrova ◽  
Nina G. Kovaleva ◽  
Tatyana O. Barynskaya
Keyword(s):  
Reference Materials ◽  
Measurement Errors ◽  
Isopropyl Alcohol ◽  
Certified Reference Materials ◽  
Toxic Substances ◽  
Biological Objects ◽  
Margin Of Error ◽  
Measurement Results ◽  
And Control ◽  
Characteristic Mass

Certified reference materials (CRM) composed of propyl (11383-2019) and isopropyl (11384-2019) alcohols solutions were created for validation of measurement procedures and control of measurement errors of measurement results of mass concentrations of toxic substances (alcohol) in biological objects (urine, blood) and water. Two ways of establishing the value of the certified characteristic – mass consentration of propanol-1 or propanol-2 have been studied. The results obtained by the preparation procedure and comparison with the standard are the same within the margin of error.

An insight into Case Management and Challenges in Veteran Suicide Prevention

2020 ◽  
pp. 14-25
Author(s):  
Tamara Green
Keyword(s):  
Case Management ◽  
Suicide Prevention ◽  
Suicide Risk ◽  
Digital Transformation ◽  
Prevention Science ◽  
Historical Records ◽  
Military Members ◽  
Prediction And Control ◽  
And Control ◽  
Insight Into

Much of the literature, policies, programs, and investment has been made on mental health, case management, and suicide prevention of veterans. The Australian “veteran community is facing a suicide epidemic for the reasons that are extremely complex and beyond the scope of those currently dealing with them.” (Menz, D: 2019). Only limited work has considered the digital transformation of loosely and manual-based historical records and no enablement of Artificial Intelligence (A.I) and machine learning to suicide risk prediction and control for serving military members and veterans to date. This paper presents issues and challenges in suicide prevention and management of veterans, from the standing of policymakers to stakeholders, campaigners of veteran suicide prevention, science and big data, and an opportunity for the digital transformation of case management.

Application of EDS Technique for OSP Film Thickness Measurement

2006 ◽  
Author(s):  
Prong Kongsubto ◽  
Sirarat Kongwudthiti
Keyword(s):  
Thin Film ◽  
Quantitative Analysis ◽  
Joint Strength ◽  
Critical Factor ◽  
Thickness Measurement ◽  
Ic Manufacturing ◽  
And Control ◽  
Film Thickness Measurement ◽  
Non Destructive

Abstract Organic solderability preservatives (OSPs) pad is one of the pad finishing technologies where Cu pad is coated with a thin film of an organic material to protect Cu from oxidation during storage and many processes in IC manufacturing. Thickness of OSP film is a critical factor that we have to consider and control in order to achieve desirable joint strength. Until now, no non-destructive technique has been proposed to measure OSP thickness on substrate. This paper reports about the development of EDS technique for estimating OSP thickness, starting with determination of the EDS parameter followed by establishing the correlation between C/Cu ratio and OSP thickness and, finally, evaluating the accuracy of the EDS technique for OSP thickness measurement. EDS quantitative analysis was proved that it can be utilized for OSP thickness estimation.

A case study of wear-type rail corrugation prediction and control using speed variation

2009 ◽  
Vol 325 (1-2) ◽  
pp. 85-105 ◽  
Author(s):  
P.A. Meehan ◽  
P.A. Bellette ◽  
R.D. Batten ◽  
W.J.T. Daniel ◽  
R.J. Horwood
Keyword(s):  
Rail Corrugation ◽  
Speed Variation ◽  
Prediction And Control ◽  
And Control

scholarly journals Data-Driven Stability Assessment of Multilayer Long Short-Term Memory Networks

2021 ◽  
Vol 11 (4) ◽  
pp. 1829
Author(s):  
Davide Grande ◽  
Catherine A. Harris ◽  
Giles Thomas ◽  
Enrico Anderlini
Keyword(s):  
Neural Network ◽  
Network Architecture ◽  
Short Term Memory ◽  
Moving Average ◽  
Machine Learning Algorithms ◽  
Physical Models ◽  
Data Driven ◽  
The Stability ◽  
And Control ◽  
Nonlinear Autoregressive

Recurrent Neural Networks (RNNs) are increasingly being used for model identification, forecasting and control. When identifying physical models with unknown mathematical knowledge of the system, Nonlinear AutoRegressive models with eXogenous inputs (NARX) or Nonlinear AutoRegressive Moving-Average models with eXogenous inputs (NARMAX) methods are typically used. In the context of data-driven control, machine learning algorithms are proven to have comparable performances to advanced control techniques, but lack the properties of the traditional stability theory. This paper illustrates a method to prove a posteriori the stability of a generic neural network, showing its application to the state-of-the-art RNN architecture. The presented method relies on identifying the poles associated with the network designed starting from the input/output data. Providing a framework to guarantee the stability of any neural network architecture combined with the generalisability properties and applicability to different fields can significantly broaden their use in dynamic systems modelling and control.

Phenomenological Foundations for the Study of Suicide

1973 ◽  
Vol 4 (3) ◽  
pp. 195-208
Author(s):  
Keith Hoeller
Keyword(s):  
Great Emphasis ◽  
Prediction And Control ◽  
And Control

Is death the “enemy” to be avoided at all costs or is it to be faced, engendering liberation and rebirth? Contemporary suicidology concerns itself with the “causes” of suicide, placing great emphasis on prediction and control However, when the “meaning” of suicide is studied, understanding it as a human phenomenon becomes of major concern. Part of this understanding requires one to view “dread” as implying the possibility of making one's existence one's own, rather than something that must be prevented. In the study of suicide, revolutionary insights can emerge if less emphasis is placed on death as the “enemy” and more attention is placed on “dread” as a potential liberator.

Sign in / Sign up

Export Citation Format

Share Document