scholarly journals Application of Tagged Neutron Method for Detecting Diamonds in Kimberlite

Instruments ◽  
2020 ◽  
Vol 4 (4) ◽  
pp. 33
Author(s):  
Yury Rogov ◽  
Vladislav Kremenets ◽  
Mikhail Sapozhnikov ◽  
Motswakae Sebele
Keyword(s):  
Carbon Concentration ◽  
Elemental Content ◽  
Excess Carbon ◽  
Neutron Method

The results of testing a prototype of a separator for detecting diamonds in kimberlite ore using tagged neutron method are discussed. Kimberlite ore was irradiated with fast tagged neutrons with an energy of 14.1 MeV. The elemental content of the tray with kimberlite ore was determined. The criterion for detecting diamond was the presence of excess carbon concentration in a certain region of a kimberlite sample.

Electron Probe Microanalysis of Frozen Hydrated Kidneys, Isolated Cells, and Cultured Cells

1982 ◽  
Vol 40 ◽  
pp. 402-403 ◽  
Author(s):  
Claude Lechene
Keyword(s):  
Liquid Nitrogen ◽  
Electron Probe Microanalysis ◽  
Electron Probe ◽  
Cultured Cells ◽  
Liquid Nitrogen Temperature ◽  
Elemental Content ◽  
Isolated Cells ◽  
Renal Tubular Cells ◽  
Diamond Saw ◽  
Saw Blade

Electron probe microanalysis of frozen hydrated kidneysThe goal of the method is to measure on the same preparation the chemical elemental content of the renal luminal tubular fluid and of the surrounding renal tubular cells. The following method has been developed. Rat kidneys are quenched in solid nitrogen. They are trimmed under liquid nitrogen and mounted in a copper holder using a conductive medium. Under liquid nitrogen, a flat surface is exposed by sawing with a diamond saw blade at constant speed and constant pressure using a custom-built cryosaw. Transfer into the electron probe column (Cameca, MBX) is made using a simple transfer device maintaining the sample under liquid nitrogen in an interlock chamber mounted on the electron probe column. After the liquid nitrogen is evaporated by creating a vacuum, the sample is pushed into the special stage of the instrument. The sample is maintained at close to liquid nitrogen temperature by circulation of liquid nitrogen in the special stage.

An atomic resolution study of a carbide phase in platinum

1992 ◽  
Vol 50 (1) ◽  
pp. 20-21
Author(s):  
M.J. Witcomb ◽  
M.A. O'Keefe ◽  
CJ. Echer ◽  
C. Nelson ◽  
J.H. Turner ◽  
...  
Keyword(s):  
Solid Solution ◽  
Carbon Atom ◽  
Carbide Phase ◽  
Structural Changes ◽  
Critical Role ◽  
Alloy System ◽  
Atomic Resolution ◽  
Excess Carbon ◽  
Interstitial Carbon ◽  
Resolution Study

Under normal circumstances, Pt dissolves only a very small amount of interstitial carbon in solid solution. Even so, an appropriate quench/age treatment leads to the formation of stable Pt2C {100} plate precipitates. Excess (quenched-in) vacancies play a critical role in the process by accommodating the volume and structural changes that accompany the transformation. This alloy system exhibits other interesting properties. Due to a large vacancy/carbon atom binding energy, Pt can absorb excess carbon at high temperatures in a carburizing atmosphere. In regions rich in carbon and vacancies, another carbide phase, Pt7C which undergoes an order-disorder reaction was formed. The present study of Pt carburized at 1160°C and aged at 515°C shows that other carbides in the PtxC series can be produced.

TEM of grain growth and phase transformations during creep of SCS-6 silicon carbide fibers

1995 ◽  
Vol 53 ◽  
pp. 350-351
Author(s):  
L. A. Giannuzzi ◽  
C. A. Lewinsohn ◽  
C. E. Bakis ◽  
R. E. Tressler
Keyword(s):  
Silicon Carbide ◽  
Creep Rate ◽  
Vapor Deposition ◽  
Chemical Vapor ◽  
Primary Creep ◽  
Excess Carbon ◽  
Silicon Carbide Fibers ◽  
Sic Fiber ◽  
Carbon Core ◽  
Grain Width

The SCS-6 SiC fiber is a 142 μm diameter fiber consisting of four distinct regions of βSiC. These SiC regions vary in excess carbon content ranging from 10 a/o down to 5 a/o in the SiC1 through SiC3 region. The SiC4 region is stoichiometric. The SiC sub-grains in all regions grow radially outward from the carbon core of the fiber during the chemical vapor deposition processing of these fibers. In general, the sub-grain width changes from 50nm to 250nm while maintaining an aspect ratio of ~10:1 from the SiC1 through the SiC4 regions. In addition, the SiC shows a <110> texture, i.e., the {111} planes lie ±15° along the fiber axes. Previous has shown that the SCS-6 fiber (as well as the SCS-9 and the developmental SCS-50 μm fiber) undergoes primary creep (i.e., the creep rate constantly decreases as a function of time) throughout the lifetime of the creep test.

Preparation of cultured astrocytes for x-ray microanalysis

1989 ◽  
Vol 47 ◽  
pp. 988-989
Author(s):  
N.K.R. Smith ◽  
K.E. Hunter ◽  
P. Mobley ◽  
L.P. Felpel
Keyword(s):  
Cultured Cells ◽  
Elemental Content ◽  
Elemental Distribution ◽  
Sprague Dawley ◽  
X Ray ◽  
Cultured Astrocytes ◽  
Freeze Dried ◽  
Ultimate Objective

Electron probe energy dispersive x-ray microanalysis (XRMA) offers a powerful tool for the determination of intracellular elemental content of biological tissue. However, preparation of the tissue specimen , particularly excitable central nervous system (CNS) tissue , for XRMA is rather difficult, as dissection of a sample from the intact organism frequently results in artefacts in elemental distribution. To circumvent the problems inherent in the in vivo preparation, we turned to an in vitro preparation of astrocytes grown in tissue culture. However, preparations of in vitro samples offer a new and unique set of problems. Generally, cultured cells, growing in monolayer, must be harvested by either mechanical or enzymatic procedures, resulting in variable degrees of damage to the cells and compromised intracel1ular elemental distribution. The ultimate objective is to process and analyze unperturbed cells. With the objective of sparing others from some of the same efforts, we are reporting the considerable difficulties we have encountered in attempting to prepare astrocytes for XRMA.Tissue cultures of astrocytes from newborn C57 mice or Sprague Dawley rats were prepared and cultured by standard techniques, usually in T25 flasks, except as noted differently on Cytodex beads or on gelatin. After different preparative procedures, all samples were frozen on brass pins in liquid propane, stored in liquid nitrogen, cryosectioned (0.1 μm), freeze dried, and microanalyzed as previously reported.

ABOUT HEAT CAPACITY OF TITANIUM CARBIDE TiCx

2019 ◽  
pp. 56-66
Author(s):  
I. Khidirov ◽  
V. V. Getmanskiy ◽  
A. S. Parpiev ◽  
Sh. A. Makhmudov
Keyword(s):  
Heat Capacity ◽  
High Temperature ◽  
Titanium Carbide ◽  
Temperature Dependence ◽  
Carbon Concentration ◽  
Room Temperature ◽  
Thermodynamic Characteristics ◽  
Liquid Nitrogen Temperature ◽  
Analysis Data ◽  
Thermal Excitation

This work relates to the field of thermophysical parameters of refractory interstitial alloys. The isochoric heat capacity of cubic titanium carbide TiCx has been calculated within the Debye approximation in the carbon concentration  range x = 0.70–0.97 at room temperature (300 K) and at liquid nitrogen temperature (80 K) through the Debye temperature established on the basis of neutron diffraction analysis data. It has been found out that at room temperature with decrease of carbon concentration the heat capacity significantly increases from 29.40 J/mol·K to 34.20 J/mol·K, and at T = 80 K – from 3.08 J/mol·K to 8.20 J/mol·K. The work analyzes the literature data and gives the results of the evaluation of the high-temperature dependence of the heat capacity СV of the cubic titanium carbide TiC0.97 based on the data of neutron structural analysis. It has been proposed to amend in the Neumann–Kopp formula to describe the high-temperature dependence of the titanium carbide heat capacity. After the amendment, the Neumann–Kopp formula describes the results of well-known experiments on the high-temperature dependence of the heat capacity of the titanium carbide TiCx. The proposed formula takes into account the degree of thermal excitation (a quantized number) that increases in steps with increasing temperature.The results allow us to predict the thermodynamic characteristics of titanium carbide in the temperature range of 300–3000 K and can be useful for materials scientists.

Corrosion of Welded Metal Structures of Mining Equipment

2018 ◽  
Vol 69 (9) ◽  
pp. 2563-2566
Author(s):  
Dan Dobrota
Keyword(s):  
Carbon Concentration ◽  
Welded Joints ◽  
Construction Material ◽  
Working Environment ◽  
Mining Equipment ◽  
Metal Structures ◽  
Corrosion Phenomenon ◽  
Welding Regime ◽  
New Material ◽  
Initial Research

Mining equipment made of welded metal structures is strongly affected by the corrosion phenomenon due to the working conditions. Initial research has shown that the corrosion phenomenon is most pronounced in the area of cross-welded joints and welded T-shaped joints. In the researches, there was made a chemical analysis of the welded construction material used respectively of the new material and it was observed a reduction in carbon concentration in the material used, but also a substantial increase in the sulfur concentration compared to the new material. The pronounced corrosion of the metallic structure is influenced by the chemical composition change because the sulfur is a grafitizing and weakening element, and the decrease in carbon concentration causes a decrease in corrosion resistance. Also, the pronounced corrosion is due to the action of sulfurous acid (H2SO3) and hydrogen sulfide (H2S), elements that are present in the working environment of welded constructions. In order to achieve a reduction in the corrosion phenomenon, it is very important that the welded joints are made using the optimal parameters of the welding regime so as to obtain metallographic structure with finer granulations.

Soil Moisture Measurements with the Neutron Method Supplement Weighing Lysimeters

1961 ◽  
Vol 25 (5) ◽  
pp. 339-342 ◽  
Author(s):  
J. L. McGuinness ◽  
F. R. Dreibelbis ◽  
L. L. Harrold
Keyword(s):  
Soil Moisture ◽  
Neutron Method
Sign in / Sign up

Export Citation Format

Share Document