scholarly journals Rolling Spherical Triboelectric Nanogenerators (RS-TENG) under Low-Frequency Ocean Wave Action

2021 ◽  
Vol 10 (1) ◽  
pp. 5
Author(s):  
Yuzhou Wang ◽  
Ali Matin Nazar ◽  
Jiajun Wang ◽  
Kequan Xia ◽  
Delin Wang ◽  
...  
Keyword(s):  
Mechanical Energy ◽  
Low Frequency ◽  
Electrical Energy ◽  
Ocean Waves ◽  
Open Circuit ◽  
Green Energy ◽  
Wave Action ◽  
Ocean Wave ◽  
Maximum Output ◽  
Triboelectric Nanogenerators

Triboelectric nanogenerators (TENG), which convert mechanical energy (such as ocean waves) from the surrounding environment into electrical energy, have been identified as a green energy alternative for addressing the environmental issues resulting from the use of traditional energy resources. In this experimental design, we propose rolling spherical triboelectric nanogenerators (RS-TENG) for collecting energy from low-frequency ocean wave action. Copper and aluminum were used to create a spherical frame which functions as the electrode. In addition, different sizes of spherical dielectric (SD1, SD2, SD3, and SD4) were developed in order to compare the dielectric effect on output performance. This design places several electrodes on each side of the spherical structure such that the dielectric layers are able to move with the slightest oscillation and generate electrical energy. The performance of the RS-TENG was experimentally investigated, with the results indicating that the spherical dielectrics significantly impact energy harvesting performance. On the other hand, the triboelectric materials (i.e., copper and aluminum) play a less important role. The copper RS-TENG with the largest spherical dielectrics is the most efficient structure, with a maximum output of 12.75 V in open-circuit and a peak power of approximately 455 nW.

scholarly journals Triboelectric nanogenerator based on Teflon/vitamin B1 powder for self-powered humidity sensing

2020 ◽  
Vol 11 ◽  
pp. 1394-1401
Author(s):  
Liangyi Zhang ◽  
Huan Li ◽  
Yiyuan Xie ◽  
Jing Guo ◽  
Zhiyuan Zhu
Keyword(s):  
Relative Humidity ◽  
Mechanical Energy ◽  
Vitamin B1 ◽  
Cost Effective ◽  
Electrical Energy ◽  
Open Circuit ◽  
Triboelectric Nanogenerator ◽  
Cost Effective Method ◽  
Self Powered ◽  
Triboelectric Nanogenerators

Recently, there has been growing interest in triboelectric nanogenerators (TENGs) that can effectively convert various forms of mechanical energy input into electrical energy. In the present study, a novel Teflon/vitamin B1 powder based triboelectric nanogenerator (TVB-TENG) is proposed. Paper is utilized as a supporting platform for triboelectrification between a commercial Teflon tape and vitamin B1 powder. The measured open-circuit voltage was approximately 340 V. The TVB-TENG can be applied as a humidity sensor and exhibits a linear and reversible response to the relative humidity of the environment. Moreover, the change in relative humidity is also indicated by the change in luminosity of a set of light-emitting diodes (LEDs) integrated in the TVB-TENG system. The TVB-TENG proposed in this study illustrates a cost-effective method for portable power supply and sensing devices.

scholarly journals Fabrication and Evaluation of a MEMS Piezoelectric Bimorph Generator for Vibration Energy Harvesting

2010 ◽  
Vol 26 (4) ◽  
pp. 493-499 ◽  
Author(s):  
B. S. Lee ◽  
S. C. Lin ◽  
W. J. Wu
Keyword(s):  
Mechanical Energy ◽  
Maximum Output Power ◽  
Electrical Energy ◽  
Open Circuit ◽  
Maximum Output ◽  
Resistive Load ◽  
Piezoelectric Bimorph ◽  
Vibration Energy Harvesting ◽  
Parallel Polarization ◽  
Piezoelectric Layers

ABSTRACTWe present the development of a MEMS piezoelectric bimorph generator, a cantilever type bimorph which was formed by laminating two PZT piezoelectric layers. Our bimorph generator can scavenge mechanical energy from ambient vibrations and transform it into useful electrical energy. Two poling configurations of the PZT piezoelectric layers of our bimorph MEMS generator were fabricated and tested. A tip proof mass used for adjusting the resonance frequency was also demonstrated. Experimental results confirm that our device possessed a maximum open-circuit output voltage of 1.91VP-P and a 3.42VP-P for a parallel polarization device and a serial polarization device, respectively with a 2g externally applied vibration. At an optimal resistive load, the maximum output power was 1.548μ–W and 1.778μ–W for a parallel polarization device and a serial polarization device, respectively.

scholarly journals Contemporary and Practicable Technique to Produce Electricity using Waves

2019 ◽  
Vol 8 (6S3) ◽  
pp. 1329-1333
Keyword(s):  
Renewable Energy ◽  
Wave Energy ◽  
Mechanical Energy ◽  
Research Work ◽  
Electrical Energy ◽  
Ocean Waves ◽  
Ocean Wave ◽  
Energy Technologies ◽  
Ocean Wave Energy ◽  
Main Components

Ocean waves are huge, large untapped energy resources and the potential for extracting energy from waves is considerable. Ocean wave energy can play a dynamic role for producing electricity as fresh source of renewable energy to the off-grid power connection in remote areas. There are number of research work going across and around the coastlineto generate electrical energy from the ocean waves. Wave energy conversion technologies are important and lead to more research work in future.Wave energy converters converts the mechanical energy obtained from ocean waves to electricity. Researches in this area are driven for the need to meet demand in electricity but it is relatively immature compared to other renewable energy technologies. This proposed paper aims to develop a prototype that can utilize the wave energy to produce electricity. Wave energy generator has been developed and the results are analysed for different specifications of converter and also presented. From the experimental setup it is assured that slowly varying power generation is obtained from ocean wave. This paper also comprises working and main components of the system.

Broadband Rotational Energy Harvesting Using Micro Energy Harvester

2018 ◽  
Author(s):  
Jui-Ta Chien ◽  
Yung-Hsing Fu ◽  
Chao-Ting Chen ◽  
Shun-Chiu Lin ◽  
Yi-Chung Shu ◽  
...  
Keyword(s):  
Energy Harvesting ◽  
Output Voltage ◽  
Energy Harvester ◽  
Low Frequency ◽  
Rotational Energy ◽  
Open Circuit ◽  
Maximum Output ◽  
Rotational Excitation ◽  
Rotating Speed ◽  
Piezoelectric Energy

This paper proposes a broadband rotational energy harvesting setup by using micro piezoelectric energy harvester (PEH). When driven in different rotating speed, the PEH can output relatively high power which exhibits the phenomenon of frequency up-conversion transforming the low frequency of rotation into the high frequency of resonant vibration. It aims to power self-powered devices used in the applications, like smart tires, smart bearings, and health monitoring sensors on rotational machines. Through the excitation of the rotary magnetic repulsion, the cantilever beam presents periodically damped oscillation. Under the rotational excitation, the maximum output voltage and power of PEH with optimal impedance is 28.2 Vpp and 663 μW, respectively. The output performance of the same energy harvester driven in ordinary vibrational based excitation is compared with rotational oscillation under open circuit condition. The maximum output voltage under 2.5g acceleration level of vibration is 27.54 Vpp while the peak output voltage of 36.5 Vpp in rotational excitation (in 265 rpm).

scholarly journals Triboelectric nanogenerators (TENG): Factors affecting its efficiency and applications

2021 ◽  
Vol 34 (2) ◽  
pp. 157-172
Author(s):  
Deepak Anand ◽  
Singh Sambyal ◽  
Rakesh Vaid
Keyword(s):  
Large Scale ◽  
Review Paper ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Wearable Electronics ◽  
Factors Affecting ◽  
Electrostatic Induction ◽  
Triboelectric Nanogenerators ◽  
Human Motions ◽  
Great Scope

The demand for energy is increasing tremendously with modernization of the technology and requires new sources of renewable energy. The triboelectric nanogenerators (TENG) are capable of harvesting ambient energy and converting it into electricity with the process of triboelectrification and electrostatic-induction. TENG can convert mechanical energy available in the form of vibrations, rotation, wind and human motions etc., into electrical energy there by developing a great scope for scavenging large scale energy. In this review paper, we have discussed various modes of operation of TENG along with the various factors contributing towards its efficiency and applications in wearable electronics.

scholarly journals Performance assessment of a small-size ocean wave energy harvester

2019 ◽  
Vol 283 ◽  
pp. 05006
Author(s):  
Yongjie Sang ◽  
Bertrand Dubus
Keyword(s):  
Electrical Power ◽  
Vertical Motion ◽  
Electrical Energy ◽  
Ocean Waves ◽  
Electrical Circuit ◽  
Optimal Choice ◽  
Ocean Wave ◽  
Unit Weight ◽  
Ocean Energy ◽  
Ocean Wave Energy

A lightweight electromechanical device is studied to harvest energy of ocean waves and supply electrical power to small-size ocean observation equipment such as sonobuoys. It is composed of a magnet fixed to the floating housing which follows the motion of the ocean surface and a moving coil connected to the case via a flexible spring. As the floating housing follows the vertical motion of water surface, a voltage is induced in the coil due to relative velocity between the coil and the magnet, and kinetic energy of the ocean wave is converted into electrical energy. Full bridge rectifying circuit and smoothing capacitor are used to convert AC voltage to constant voltage. Single degree of freedom electromechanical model of the prototype transducer (LGT-4.5 geophone) is developed and simulated with an electrical circuit software to predict energy harvesting performance. Vibration experiments are also performed with a shaker to validate transducer model and quantify output voltage. Parametric analysis is conducted to identify optimal choice of capacitance in terms of maximum stored energy and minimum charging time. This device is simple and small size relative to ocean wavelength compared to classical linear permanent magnetic generator used in offshore power plant. Its power generation per unit weight is compared to larger scale ocean energy converters.

scholarly journals Triboelectric Nanogenerators for Energy Harvesting in Ocean: A Review on Application and Hybridization

Energies ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5600
Author(s):  
Ali Matin Matin Nazar ◽  
King-James Idala Idala Egbe ◽  
Azam Abdollahi ◽  
Mohammad Amin Hariri-Ardebili
Keyword(s):  
Energy Harvesting ◽  
Mechanical Energy ◽  
Ocean Waves ◽  
Energy Resources ◽  
Advantages And Disadvantages ◽  
Natural Energy ◽  
Electromagnetic Generators ◽  
Triboelectric Nanogenerators ◽  
High Level ◽  
Energy Harvesting Devices

With recent advancements in technology, energy storage for gadgets and sensors has become a challenging task. Among several alternatives, the triboelectric nanogenerators (TENG) have been recognized as one of the most reliable methods to cure conventional battery innovation’s inadequacies. A TENG transfers mechanical energy from the surrounding environment into power. Natural energy resources can empower TENGs to create a clean and conveyed energy network, which can finally facilitate the development of different remote gadgets. In this review paper, TENGs targeting various environmental energy resources are systematically summarized. First, a brief introduction is given to the ocean waves’ principles, as well as the conventional energy harvesting devices. Next, different TENG systems are discussed in details. Furthermore, hybridization of TENGs with other energy innovations such as solar cells, electromagnetic generators, piezoelectric nanogenerators and magnetic intensity are investigated as an efficient technique to improve their performance. Advantages and disadvantages of different TENG structures are explored. A high level overview is provided on the connection of TENGs with structural health monitoring, artificial intelligence and the path forward.

Modeling and Performance Enhancement of Low-Frequency Energy Harvesters

2018 ◽  
pp. 826-862
Author(s):  
Abdessattar Abdelkefi
Keyword(s):  
Performance Enhancement ◽  
Mechanical Energy ◽  
Excitation Frequency ◽  
Low Frequency ◽  
Ocean Waves ◽  
Sensors And Actuators ◽  
Low Frequencies ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
And Performance

There exist numerous low-frequency excitation sources, such as walking, breathing, and ocean waves, capable of providing viable amounts of mechanical energy to power many critical devices, including pacemakers, cell phones, MEMS devices, wireless sensors, and actuators. Harvesting significant energy levels from such sources can only be achieved through the design of devices capable of performing effective energy transfer mechanisms over low frequencies. In this chapter, two concepts of efficient low-frequency piezoelectric energy harvesters are presented, namely, variable-shaped piezoelectric energy harvesters and piezomagnetoelastic energy harvesters. Linear and nonlinear electromechanical models are developed and validated in this chapter. The results show that the quadratic shape can yield up to two times the energy harvested by a rectangular one. It is also demonstrated that depending on the available excitation frequency, an enhanced energy harvester can be tuned and optimized by changing the length of the piezoelectric material or by changing the distance between the two tip magnets.

Hydrocavitation piezoelectric ocean wave energy harvesting

2021 ◽  
pp. 1-10
Author(s):  
Francisco Arias ◽  
Salvador De Las Heras
Keyword(s):  
Wave Energy ◽  
Low Cost ◽  
Electrical Energy ◽  
Ocean Waves ◽  
Ocean Wave ◽  
Mechanical Parts ◽  
Energy Harvesters ◽  
Ocean Wave Energy ◽  
Piezoelectric Layers ◽  
Local Pressures

Abstract The possibility to convert the ocean wave energy into electrical energy by piezoelectric layers has excited the imagination of ocean wave energy conversion designers for decades owing to its relative robustness (no mechanical parts are needed), the capability to cover large areas and its relative low cost. Unfortunately, the very poor efficiency featured by piezoelectric layers in application of ocean waves has prevented its application even as energy harvester. Here, the possibility to induce hydrocavitation and then working with more higher local pressures for substantial efficiency enhancement is discussed. Utilizing a simplified geometrical and physical model and the linear and potential theory, a first theoretical estimation for the energy enhancement driven by hydrocavitation was calculated. It was found that the power could be enhanced several orders of magnitude which, although still rather low, however, the enhanced electric outputs can be used now as energy harvesters. Additional R&D is encouraged in order to explore the possibilities to harness hydrocavitation to enhance piezoelectric converters.

scholarly journals Development and Validation of an Enhanced Coupled-Field Model for PZT Cantilever Bimorph Energy Harvester

2013 ◽  
Vol 2013 ◽  
pp. 1-10 ◽  
Author(s):  
Long Zhang ◽  
Keith A. Williams ◽  
Zhengchao Xie
Keyword(s):  
Energy Harvester ◽  
Field Model ◽  
Mechanical Energy ◽  
Electrical Energy ◽  
Open Circuit ◽  
Conservation Of Energy ◽  
Energy Harvesters ◽  
Piezoelectric Energy ◽  
Comparison Results ◽  
Coupled Field

The power source with the limited life span has motivated the development of the energy harvesters that can scavenge the ambient environment energy and convert it into the electrical energy. With the coupled field characteristics of structure to electricity, piezoelectric energy harvesters are under consideration as a means of converting the mechanical energy to the electrical energy, with the goal of realizing completely self-powered sensor systems. In this paper, two previous models in the literatures for predicting the open-circuit and close-circuit voltages of a piezoelectric cantilever bimorph (PCB) energy harvester are first described, that is, the mechanical equivalent spring mass-damper model and the electrical equivalent circuit model. Then, the development of an enhanced coupled field model for the PCB energy harvester based on another previous model in the literature using a conservation of energy method is presented. Further, the laboratory experiments are carried out to evaluate the enhanced coupled field model and the other two previous models in the literatures. The comparison results show that the enhanced coupled field model can better predict the open-circuit and close-circuit voltages of the PCB energy harvester with a proof mass bonded at the free end of the structure in order to increase the energy-harvesting level of the system.

Sign in / Sign up

Export Citation Format

Share Document