scholarly journals Numerical Study on Hydrodynamics of Ships with Forward Speed Based on Nonlinear Steady Wave

2020 ◽  
Vol 8 (2) ◽  
pp. 106
Author(s):  
Tianlong Mei ◽  
Maxim Candries ◽  
Evert Lataire ◽  
Zaojian Zou
Keyword(s):  
Steady Flow ◽  
Numerical Study ◽  
Low Frequency ◽  
The Body ◽  
Surface Boundary ◽  
Linear Superposition ◽  
Steady Wave ◽  
Body Boundary ◽  
Improved Model ◽  
Comparison Of The Results

In this paper, an improved potential flow model is proposed for the hydrodynamic analysis of ships advancing in waves. A desingularized Rankine panel method, which has been improved with the added effect of nonlinear steady wave-making (NSWM) flow in frequency domain, is employed for 3D diffraction and radiation problems. Non-uniform rational B-splines (NURBS) are used to describe the body and free surfaces. The NSWM potential is computed by linear superposition of the first-order and second-order steady wave-making potentials which are determined by solving the corresponding boundary value problems (BVPs). The so-called mj terms in the body boundary condition of the radiation problem are evaluated with nonlinear steady flow. The free surface boundary conditions in the diffraction and radiation problems are also derived by considering nonlinear steady flow. To verify the improved model and the numerical method adopted in the present study, the nonlinear wave-making problem of a submerged moving sphere is first studied, and the computed results are compared with the analytical results of linear steady flow. Subsequently, the diffraction and radiation problems of a submerged moving sphere and a modified Wigley hull are solved. The numerical results of the wave exciting forces, added masses, and damping coefficients are compared with those obtained by using Neumann–Kelvin (NK) flow and double-body (DB) flow. A comparison of the results indicates that the improved model using the NSWM flow can generally give results in better agreement with the test data and other published results than those by using NK and DB flows, especially for the hydrodynamic coefficients in relatively low frequency ranges.

Numerical Study of Forward-Speed Ship Motion and Added Resistance

2017 ◽  
Author(s):  
D. C. Hong ◽  
T. B. Ha ◽  
K. H. Song
Keyword(s):  
Integral Equation ◽  
Free Surface ◽  
Numerical Study ◽  
Three Dimensional ◽  
The Body ◽  
Experimental Results ◽  
Surface Boundary ◽  
Forward Speed ◽  
Added Resistance ◽  
Following Seas

The added resistance of a ship was calculated using Maruo’s formula [1] involving the three-dimensional Kochin function obtained using the source and normal doublet distribution over the wetted surface of the ship. The density of the doublet distribution was obtained as the solution of the three-dimensional frequency-domain forward-speed Green integral equation containing the exact line integral along the waterline. Numerical results of the Wigley ship models II and III in head seas, obtained by making use of the inner-collocation 9-node second-order boundary element method have been compared with the experimental results reported by Journée [2]. The forward-speed hydrodynamic coefficients of the Wigley models have shown no irregular-frequencylike behavior. The steady disturbance potential due to the constant forward speed of the ship has also been calculated using the Green integral equation associated with the steady forward-speed free-surface Green function since the so-called mj-terms [3] appearing in the body boundary conditions contain the first and second derivatives of the steady potential over the wetted surface of the ship. However, the free-surface boundary condition was kept linear in the present study. The added resistances of the Wigley II and III models in head seas obtained using Maruo’s formula showing acceptable comparison with experimental results, have been presented. The added resistances in following seas obtained using Maruo’s formula have also been presented.

Review of Approximations to Evaluate Second-Order Low-Frequency Load

2012 ◽  
Author(s):  
Guillaume de Hauteclocque ◽  
Flávia Rezende ◽  
Olaf Waals ◽  
Xiao-Bo Chen
Keyword(s):  
Free Surface ◽  
Shallow Water ◽  
Low Frequency ◽  
Second Order ◽  
The Body ◽  
Difference Frequency ◽  
Surface Boundary ◽  
First Order ◽  
Potential Part ◽  
The Difference

The second order low-frequency loads are one of main sources of excitation for moored systems. These loads are usually decomposed into the quadratic part, contributed only by first order quantities and potential part contributed by the second order potentials. In shallow water the second order incoming and diffracted potentials give a significant contribution to the low frequency forces. Therefore, the accuracy on the determination of this parcel of the low-frequency loads is a key issue for the assessment of mooring lines and operability of systems moored in shallow water area, as for example LNG terminals. Due to the complexity in computing the second order diffraction potential, which would involve a non-homogeneous free surface boundary condition, the so-called Pinkster approximation has been proposed. This approximation is based on the assumption that the major contribution to the potential part of low-frequency loads is given by the second order potential of the undisturbed incoming waves. The methods to compute the wave forces related to the second order potentials are based on scaling of the first order wave induced forces. Another approximation recently formulated in Chen and Rezende consists of developing the second-order bi-frequency load into a series of different orders of the difference frequency. The potential contribution to the term proportional to the difference-frequency can be evaluated efficiently by involving an integral over a small zone on the free surface around the body. In the present paper, the existing approximations are revisited and compared to analytical solution of exact second-order load on a vertical cylinder and for the case of floating body (LNG) in shallow water. Some guidelines in the practical use of different approximations will be derived.

Numerical study of the low-frequency atomic dynamics in a Lennard-Jones glass

1998 ◽  
Vol 77 (2) ◽  
pp. 473-484 ◽  
Author(s):  
M. Sampoli, P. Benassi, R. Dell'Anna,
Keyword(s):  
Numerical Study ◽  
Low Frequency ◽  
Lennard Jones

scholarly journals Discrete Vortex Prediction of Flows around a Cylinder Near a Wall Using Overlapping Grid System

Fluids ◽  
2021 ◽  
Vol 6 (6) ◽  
pp. 211
Author(s):  
Wisnu Wardhana ◽  
Ede Mehta Wardhana ◽  
Meitha Soetardjo
Keyword(s):  
Grid Point ◽  
The Body ◽  
Cylinder Surface ◽  
Grid System ◽  
Vortex Interaction ◽  
Discrete Vortex ◽  
Cpu Time ◽  
Comparison Of The Results ◽  
Circular Grid ◽  
Interaction Velocity

Modelling of unidirectional and oscillatory flows around a cylinder near a wall using an overlapping grid system is carried out. The circular grid system of the cylinder was overlapped with the rectangular grid system of the wall. The use of such an overlapping grid system is intended to reduce the CPU time compared to the cloud scheme in which vortex-to-vortex interaction is used, i.e., especially in calculating the shedding vortex velocity, since calculating the vortices velocity takes the longest CPU time. This method is not only time efficient, but also gives a better distribution of surface vorticity as the scattered vortices around the body are now concentrated on a grid point. Therefore, grid-to-grid interaction is used instead of vortex-to-vortex interaction. Velocity calculation was also carried out using this overlapping grid in which the new incremental shift position was summed up to obtain the total new vortices position. The engineering applications of this topic are to simulate the loading of submarine pipeline placed close to the seabed or to simulate the flow as a result of the scouring process below the cylinder since there is space for the fluid to flow beneath it. The in-line and transverse force coefficients are found by integrating the pressure around the cylinder surface. The flow patterns are then obtained and presented. The comparison of the results with experimental evidence is presented and the range of good results is discussed.

scholarly journals Slithering CSF: Cerebrospinal Fluid Dynamics in the Stationary and Moving Viper Boa, Candoia aspera

Biology ◽  
2021 ◽  
Vol 10 (7) ◽  
pp. 672
Author(s):  
Bruce A. Young ◽  
Skye Greer ◽  
Michael Cramberg
Keyword(s):  
Cerebrospinal Fluid ◽  
Cardiac Cycle ◽  
Low Frequency ◽  
Mean Amplitude ◽  
The Body ◽  
Body Waves ◽  
Lower Amplitude ◽  
Lateral Undulation ◽  
Recovery From Anesthesia ◽  
The Relationship

In the viper boa (Candoia aspera), the cerebrospinal fluid (CSF) shows two stable overlapping patterns of pulsations: low-frequency (0.08 Hz) pulses with a mean amplitude of 4.1 mmHg that correspond to the ventilatory cycle, and higher-frequency (0.66 Hz) pulses with a mean amplitude of 1.2 mmHg that correspond to the cardiac cycle. Manual oscillations of anesthetized C. aspera induced propagating sinusoidal body waves. These waves resulted in a different pattern of CSF pulsations with frequencies corresponding to the displacement frequency of the body and with amplitudes greater than those of the cardiac or ventilatory cycles. After recovery from anesthesia, the snakes moved independently using lateral undulation and concertina locomotion. The episodes of lateral undulation produced similar influences on the CSF pressure as were observed during the manual oscillations, though the induced CSF pulsations were of lower amplitude during lateral undulation. No impact on the CSF was found while C. aspera was performing concertina locomotion. The relationship between the propagation of the body and the CSF pulsations suggests that the body movements produce an impulse on the spinal CSF.

scholarly journals A Computational Study on the Role of Parameters for Identification of Thyroid Nodules by Infrared Images (and Comparison with Real Data)

Sensors ◽  
2021 ◽  
Vol 21 (13) ◽  
pp. 4459
Author(s):  
José R. González ◽  
Charbel Damião ◽  
Maira Moran ◽  
Cristina A. Pantaleão ◽  
Rubens A. Cruz ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Thyroid Nodules ◽  
Numerical Study ◽  
Computational Study ◽  
Internal Heat ◽  
Heat Transfer Process ◽  
The Body ◽  
Physical Parameters ◽  
Infrared Sensors ◽  
Wide Range

According to experts and medical literature, healthy thyroids and thyroids containing benign nodules tend to be less inflamed and less active than those with malignant nodules. It seems to be a consensus that malignant nodules have more blood veins and more blood circulation. This may be related to the maintenance of the nodule’s heat at a higher level compared with neighboring tissues. If the internal heat modifies the skin radiation, then it could be detected by infrared sensors. The goal of this work is the investigation of the factors that allow this detection, and the possible relation with any pattern referent to nodule malignancy. We aim to consider a wide range of factors, so a great number of numerical simulations of the heat transfer in the region under analysis, based on the Finite Element method, are performed to study the influence of each nodule and patient characteristics on the infrared sensor acquisition. To do so, the protocol for infrared thyroid examination used in our university’s hospital is simulated in the numerical study. This protocol presents two phases. In the first one, the body under observation is in steady state. In the second one, it is submitted to thermal stress (transient state). Both are simulated in order to verify if it is possible (by infrared sensors) to identify different behavior referent to malignant nodules. Moreover, when the simulation indicates possible important aspects, patients with and without similar characteristics are examined to confirm such influences. The results show that the tissues between skin and thyroid, as well as the nodule size, have an influence on superficial temperatures. Other thermal parameters of thyroid nodules show little influence on surface infrared emissions, for instance, those related to the vascularization of the nodule. All details of the physical parameters used in the simulations, characteristics of the real nodules and thermal examinations are publicly available, allowing these simulations to be compared with other types of heat transfer solutions and infrared examination protocols. Among the main contributions of this work, we highlight the simulation of the possible range of parameters, and definition of the simulation approach for mapping the used infrared protocol, promoting the investigation of a possible relation between the heat transfer process and the data obtained by infrared acquisitions.

A Parametric Study of Low-Frequency Damping of Mooring System

2014 ◽  
Author(s):  
Minglu Chen ◽  
Shan Huang ◽  
Nigel Baltrop ◽  
Ji Chunyan ◽  
Liangbi Li
Keyword(s):  
Low Frequency ◽  
Structure Design ◽  
The Body ◽  
Body Motion ◽  
Mooring Line ◽  
Offshore Structure ◽  
Frequency Oscillation ◽  
Low Frequency Oscillation ◽  
Line System ◽  
Irregular Wave

Mooring line damping plays an important role to the body motion of moored floating platforms. Meanwhile, it can also make contributions to optimize the mooring line system. Accurate assessment of mooring line damping is thus an essential issue for offshore structure design. However, it is difficult to determine the mooring line damping based on theoretical methods. This study considers the parameters which have impact on mooring-induced damping. In the paper, applying Morison formula to calculate the drag and initial force on the mooring line, its dynamic response is computed in the time domain. The energy dissipation of the mooring line due to the viscosity was used to calculate mooring-induced damping. A mooring line is performed with low-frequency oscillation only, the low-frequency oscillation superimposed with regular and irregular wave-frequency motions. In addition, the influences of current velocity, mooring line pretension and different water depths are taken into account.

A NUMERICAL STUDY ON THE HEMODYNAMIC AND SHEAR STRESS OF DOUBLE ANEURYSM THROUGH S-SHAPED VESSEL

2015 ◽  
Vol 27 (04) ◽  
pp. 1550033 ◽  
Author(s):  
Mahdi Halabian ◽  
Alireza Karimi ◽  
Borhan Beigzadeh ◽  
Mahdi Navidbakhsh
Keyword(s):  
Blood Flow ◽  
Mechanical Behavior ◽  
Numerical Study ◽  
Flow Characteristics ◽  
Flow Simulation ◽  
The Body ◽  
Sweep Angle ◽  
Abdominal Aortic ◽  
Hemodynamic Characteristics ◽  
Refined Meshes

Abdominal aortic aneurysm (AAA) is a degenerative disease defined as the abnormal ballooning of the abdominal aorta (AA) wall which is usually caused by atherosclerosis. The aneurysm grows larger and eventually ruptures if it is not diagnosed and treated. Aneurysms occur mostly in the aorta, the main artery of the chest and abdomen. The aorta carries blood flow from the heart to all parts of the body, including the vital organs, the legs, and feet. The objective of the present study is to investigate the combined effects of aneurysm and curvature on flow characteristics in S-shaped bends with sweep angle of 90° at Reynolds number of 900. The fluid mechanics of blood flow in a curved artery with abnormal aortic is studied through a mathematical analysis and employing Cosmos flow simulation. Blood is modeled as an incompressible non-Newtonian fluid and the flow is assumed to be steady and laminar. Hemodynamic characteristics are analyzed. Grid independence is tested on three successively refined meshes. It is observed that the abrupt expansion induced by AAA results in an immensely disturbed regime. The results may have implications not only for understanding the mechanical behavior of the blood flow inside an aneurysm artery but also for investigating the mechanical behavior of the blood flow in different arterial diseases, such as atherosclerosis.

scholarly journals Electrochemotherapy Effectiveness Loss due to Electric Field Indentation between Needle Electrodes: A Numerical Study

2018 ◽  
Vol 2018 ◽  
pp. 1-8 ◽  
Author(s):  
José Alvim Berkenbrock ◽  
Rafaela Grecco Machado ◽  
Daniela Ota Hisayasu Suzuki
Keyword(s):  
Electric Field ◽  
In Silico ◽  
Treatment Effectiveness ◽  
Numerical Study ◽  
Specific Treatment ◽  
The Body ◽  
Membrane Selectivity ◽  
Chemotherapy Drugs ◽  
Mast Cell Tumor ◽  
Anticancer Treatment

Electrochemotherapy is an anticancer treatment based on applying electric field pulses that reduce cell membrane selectivity, allowing chemotherapy drugs to enter the cells. In parallel to electrochemotherapy clinical tests, in silico experiments have helped scientists and clinicians to understand the electric field distribution through anatomically complex regions of the body. In particular, these in silico experiments allow clinicians to predict problems that may arise in treatment effectiveness. The current work presents a metastatic case of a mast cell tumor in a dog. In this specific treatment planning study, we show that using needle electrodes has a possible pitfall. The macroscopic consequence of the electroporation was assessed through a mathematical model of tissue electrical conductivity. Considering the electrical and geometrical characteristics of the case under study, we modeled an ellipsoidal tumor. Initial simulations were based on the European Standard Operating Procedures for electrochemotherapy suggestions, and then different electrodes’ arrangements were evaluated. To avoid blind spots, multiple applications are usually required for large tumors, demanding electrode repositioning. An effective treatment electroporates all the tumor cells. Partially and slightly overlapping the areas increases the session’s duration but also likely increases the treatment’s effectiveness. It is worth noting that for a single application, the needles should not be placed close to the tumor’s borders because effectiveness is highly likely to be lost.

scholarly journals Empirical Mode Reduction in a Model of Extratropical Low-Frequency Variability

2006 ◽  
Vol 63 (7) ◽  
pp. 1859-1877 ◽  
Author(s):  
D. Kondrashov ◽  
S. Kravtsov ◽  
M. Ghil
Keyword(s):  
Numerical Study ◽  
Singular Spectrum Analysis ◽  
Low Frequency ◽  
The Arctic ◽  
Reduced Model ◽  
The North ◽  
Low Frequency Variability ◽  
Intraseasonal Oscillations ◽  
The Arctic Oscillation ◽  
The North Atlantic Oscillation

Abstract This paper constructs and analyzes a reduced nonlinear stochastic model of extratropical low-frequency variability. To do so, it applies multilevel quadratic regression to the output of a long simulation of a global baroclinic, quasigeostrophic, three-level (QG3) model with topography; the model's phase space has a dimension of O(104). The reduced model has 45 variables and captures well the non-Gaussian features of the QG3 model's probability density function (PDF). In particular, the reduced model's PDF shares with the QG3 model its four anomalously persistent flow patterns, which correspond to opposite phases of the Arctic Oscillation and the North Atlantic Oscillation, as well as the Markov chain of transitions between these regimes. In addition, multichannel singular spectrum analysis identifies intraseasonal oscillations with a period of 35–37 days and of 20 days in the data generated by both the QG3 model and its low-dimensional analog. An analytical and numerical study of the reduced model starts with the fixed points and oscillatory eigenmodes of the model's deterministic part and uses systematically an increasing noise parameter to connect these with the behavior of the full, stochastically forced model version. The results of this study point to the origin of the QG3 model's multiple regimes and intraseasonal oscillations and identify the connections between the two types of behavior.

Sign in / Sign up

Export Citation Format

Share Document