scholarly journals Human–Robot Collaboration Trends and Safety Aspects: A Systematic Review

2021 ◽  
Vol 10 (3) ◽  
pp. 48
Author(s):  
Janis Arents ◽  
Valters Abolins ◽  
Janis Judvaitis ◽  
Oskars Vismanis ◽  
Aly Oraby ◽  
...  
Keyword(s):  
Early Stage ◽  
Industrial Robots ◽  
Smart Manufacturing ◽  
Safety Issues ◽  
Stage Of Development ◽  
Complex Process ◽  
Human Robot Collaboration ◽  
Smart Factories ◽  
And Robotics ◽  
Safety Action

Smart manufacturing and smart factories depend on automation and robotics, whereas human–robot collaboration (HRC) contributes to increasing the effectiveness and productivity of today’s and future factories. Industrial robots especially in HRC settings can be hazardous if safety is not addressed properly. In this review, we look at the collaboration levels of HRC and what safety actions have been used to address safety. One hundred and ninety-three articles were identified from which, after screening and eligibility stages, 46 articles were used for the extraction stage. Predefined parameters such as: devices, algorithms, collaboration level, safety action, and standards used for HRC were extracted. Despite close human and robot collaboration, 25% of all reviewed studies did not use any safety actions, and more than 50% did not use any standard to address safety issues. This review shows HRC trends and what kind of functionalities are lacking in today’s HRC systems. HRC systems can be a tremendously complex process; therefore, proper safety mechanisms must be addressed at an early stage of development.

INPRO Assessment of an INS in the Area of Safety of Fuel Cycle Installations

2006 ◽  
Author(s):  
B. Raj ◽  
Y. Busurin ◽  
F. Depisch
Keyword(s):  
Nuclear Reactor ◽  
Fuel Cycle ◽  
Early Stage ◽  
Sol Gel ◽  
Safety Issues ◽  
Stage Of Development ◽  
Energy Needs ◽  
Fuel Fabrication ◽  
Specific Assessment ◽  
Acceptance Limits

INPRO has defined requirements organized in a hierarchy of Basic Principles, User Requirements and Criteria (consisting of an indicator and an acceptance limit) to be met by innovative nuclear reactor systems (INS) in six areas, namely: economics, safety, waste management, environment, proliferation resistance, and infrastructure. If an INS meets all requirements in all areas it represents a sustainable system for the supply of energy, capable of making a significant contribution to meeting the energy needs of the 21st century. Draft manuals have been developed, for each INPRO area, to provide guidance for performing an assessment of whether an INS meets the INPRO requirements in a given area. The manuals set out the information that needs to be assembled to perform an assessment and provide guidance on selecting the acceptance limits and, for a given INS, for determining the value of the indicators for comparison with the associated acceptance limits. Each manual also includes an example of a specific assessment to illustrate the guidance. This paper discusses the manual for performing an INPRO assessment in the area of safety of fuel cycle installations. The example, chosen solely for the purpose of illustrating the INPRO methodology, describes an assessment of an MOX fuel fabrication plant based on sol-gel technology and illustrates an assessment performed for an INS at an early stage of development. The safety issues and the assessment steps are presented in detail in the paper.

scholarly journals Trends in Smart Manufacturing: Role of Humans and Industrial Robots in Smart Factories

2020 ◽  
Vol 1 (2) ◽  
pp. 35-41 ◽  
Author(s):  
Linn D. Evjemo ◽  
Tone Gjerstad ◽  
Esten I. Grøtli ◽  
Gabor Sziebig
Keyword(s):  
Industrial Robots ◽  
Smart Manufacturing ◽  
Smart Factories

The Use of Logic Programming in Task Planning for Robotized Systems

2015 ◽  
Vol 809-810 ◽  
pp. 1213-1218
Author(s):  
Krzysztof Foit
Keyword(s):  
Logic Programming ◽  
Programming Language ◽  
Early Stage ◽  
Path Selection ◽  
Industrial Robots ◽  
Robot Programming ◽  
Task Planning ◽  
Stage Of Development ◽  
Surgical Field ◽  
Task Level

Preparing the task for the robotic system takes several steps. Programming a robot, as the last step, is preceded by the analysis of possible variants of its implementation and trajectory planning. However, the first step is to recognize the task and to split it into fragments, according to activity, without the reference how to realize them. The modern robotics seeks the way to shorten the time to of program preparation, developing the so-called "programming at the task level." It consists in writing a program in a language, which is similar to natural one, describing only the basic operations, without going into the details of their realization the robot (like collision-free path selection or communication with the environment through interfaces and sensors). The outcome is, for example the special voice interfaces used in robotized surgery that allow the surgeon to cooperate with assisting robot without the need to divert their attention from the surgical field. In case of industrial robots, this method is treated as the experimental one and the interest is confined to purely scientific. This article discusses some aspects of this method with respect to the first stages of the task planning. A description of the robot’s workspace and defining the basic steps in a language which is similar to natural one, allows the use of logic programming language to generate pseudocode, which eventually leads to the realization of the task. Every activity could be then divided into elementary steps that must be described directly in the robot programming language. The presented method is currently at the early stage of development and does not allow the direct programming of the robot, but the generated pseudocode could be the basis of a complete program.

The Application of UX Research in New Energy Vehicle Innovation

2019 ◽  
Vol 1 (1) ◽  
Author(s):  
Menghan TAO ◽  
Ning XIAO ◽  
Xingfu ZHAO ◽  
Wenbin LIU
Keyword(s):  
Early Stage ◽  
Rapid Expansion ◽  
The Other ◽  
Innovative Product ◽  
Stage Of Development ◽  
New Energy ◽  
New Energy Vehicle ◽  
The One ◽  
New Energy Vehicles ◽  
Degree Of Innovation

New energy vehicles(NEV) as a new thing for sustainable development, in China, on the one hand has faced the rapid expansion of the market; the other hand, for the new NEV users, the current NEVs cannot keep up with the degree of innovation. This paper demonstrates the reasons for the existence of this systematic challenge, and puts forward the method of UX research which is different from the traditional petrol vehicles research in the early stage of development, which studies from the user's essence level, to form the innovative product programs which meet the needs of users and being real attractive.

scholarly journals Learning health systems in primary care: a systematic scoping review

2021 ◽  
Vol 22 (1) ◽  
Author(s):  
Danielle M. Nash ◽  
Zohra Bhimani ◽  
Jennifer Rayner ◽  
Merrick Zwarenstein
Keyword(s):  
Primary Care ◽  
Quality Improvement ◽  
Health Systems ◽  
Scoping Review ◽  
Early Stage ◽  
Point Of Care ◽  
The United States ◽  
Stage Of Development ◽  
Integrated Health ◽  
Google Search

Abstract Background Learning health systems have been gaining traction over the past decade. The purpose of this study was to understand the spread of learning health systems in primary care, including where they have been implemented, how they are operating, and potential challenges and solutions. Methods We completed a scoping review by systematically searching OVID Medline®, Embase®, IEEE Xplore®, and reviewing specific journals from 2007 to 2020. We also completed a Google search to identify gray literature. Results We reviewed 1924 articles through our database search and 51 articles from other sources, from which we identified 21 unique learning health systems based on 62 data sources. Only one of these learning health systems was implemented exclusively in a primary care setting, where all others were integrated health systems or networks that also included other care settings. Eighteen of the 21 were in the United States. Examples of how these learning health systems were being used included real-time clinical surveillance, quality improvement initiatives, pragmatic trials at the point of care, and decision support. Many challenges and potential solutions were identified regarding data, sustainability, promoting a learning culture, prioritization processes, involvement of community, and balancing quality improvement versus research. Conclusions We identified 21 learning health systems, which all appear at an early stage of development, and only one was primary care only. We summarized and provided examples of integrated health systems and data networks that can be considered early models in the growing global movement to advance learning health systems in primary care.

scholarly journals Open Research Data and Open Peer Review: Perceptions of a Medical and Health Sciences Community in Greece

Publications ◽  
2021 ◽  
Vol 9 (2) ◽  
pp. 14
Author(s):  
Eirini Delikoura ◽  
Dimitrios Kouis
Keyword(s):  
Peer Review ◽  
Evaluation System ◽  
Early Stage ◽  
Open Science ◽  
Health Sciences ◽  
Research Data ◽  
Stage Of Development ◽  
Open Research ◽  
Proper Training ◽  
To Receive

Recently significant initiatives have been launched for the dissemination of Open Access as part of the Open Science movement. Nevertheless, two other major pillars of Open Science such as Open Research Data (ORD) and Open Peer Review (OPR) are still in an early stage of development among the communities of researchers and stakeholders. The present study sought to unveil the perceptions of a medical and health sciences community about these issues. Through the investigation of researchers` attitudes, valuable conclusions can be drawn, especially in the field of medicine and health sciences, where an explosive growth of scientific publishing exists. A quantitative survey was conducted based on a structured questionnaire, with 179 valid responses. The participants in the survey agreed with the Open Peer Review principles. However, they ignored basic terms like FAIR (Findable, Accessible, Interoperable, and Reusable) and appeared incentivized to permit the exploitation of their data. Regarding Open Peer Review (OPR), participants expressed their agreement, implying their support for a trustworthy evaluation system. Conclusively, researchers need to receive proper training for both Open Research Data principles and Open Peer Review processes which combined with a reformed evaluation system will enable them to take full advantage of the opportunities that arise from the new scholarly publishing and communication landscape.

scholarly journals Primary Care Networks and Starfield’s 4Cs: A Case for Enhanced Chronic Disease Management

2021 ◽  
Vol 18 (6) ◽  
pp. 2926
Author(s):  
Chuan De Foo ◽  
Shilpa Surendran ◽  
Geronimo Jimenez ◽  
John Pastor Ansah ◽  
David Bruce Matchar ◽  
...  
Keyword(s):  
Primary Care ◽  
Chronic Disease ◽  
Disease Management ◽  
Chronic Disease Management ◽  
Early Stage ◽  
Healthcare Delivery ◽  
Stage Of Development ◽  
Facilitators And Barriers ◽  
Design Options ◽  
First Contact

The primary care network (PCN) was implemented as a healthcare delivery model which organises private general practitioners (GPs) into groups and furnished with a certain level of resources for chronic disease management. A secondary qualitative analysis was conducted with data from an earlier study exploring facilitators and barriers GPs enrolled in PCN’s face in chronic disease management. The objective of this study is to map features of PCN to Starfield’s “4Cs” framework. The “4Cs” of primary care—comprehensiveness, first contact access, coordination and continuity—offer high-quality design options for chronic disease management. Interview transcripts of GPs (n = 30) from the original study were purposefully selected. Provision of ancillary services, manpower, a chronic disease registry and extended operating hours of GP practices demonstrated PCN’s empowering features that fulfil the “4Cs”. On the contrary, operational challenges such as the lack of an integrated electronic medical record and disproportionate GP payment structures limit PCNs from maximising the “4Cs”. However, the enabling features mentioned above outweighs the shortfalls in all important aspects of delivering optimal chronic disease care. Therefore, even though PCN is in its early stage of development, it has shown to be well poised to steer GPs towards enhanced chronic disease management.

The magic bullet for rural development? Exploring the impacts of community telecenters in Bangladesh

2021 ◽  
pp. 026666692199750
Author(s):  
Noore Alam Siddiquee ◽  
Md Gofran Faroqi
Keyword(s):  
Service Delivery ◽  
Rural Areas ◽  
Early Stage ◽  
Rural Livelihoods ◽  
Value Added ◽  
Magic Bullet ◽  
Government Information ◽  
Individual Interviews ◽  
Stage Of Development ◽  
Marginalized Groups

This paper explores the impacts of Bangladesh’s Union Digital Centers (UDCs) as government information and service delivery hubs in rural areas. Drawing on user-surveys and semi-structured individual interviews it demonstrates that the UDCs have produced generally positive yet modest impacts on governance of service delivery. It shows that the UDCs are at an early stage of development, and that they offer only a limited set of services. While they helped extend ICT-enabled services to sections of population that would otherwise have missed them, the UDCs do not have much to do with rural livelihoods and empowerment of the poor and marginalized groups. These findings point to current inadequacies and pitfalls of the UDC approach to development. We argue that enhanced viability and effectiveness of the UDC experiment would warrant embedding more value-added governmental services and further strengthening of their capacity, mandate, and connectivity with government agencies at various levels, among others.

Targets, triggers, and directionality in non-local and local place assimilation in child and adult language

2014 ◽  
Vol 50 (3) ◽  
pp. 273-307
Author(s):  
Mi-Hui Cho ◽  
Shinsook Lee
Keyword(s):  
Longitudinal Study ◽  
Early Development ◽  
Early Stage ◽  
Decisive Role ◽  
Diary Study ◽  
Consonant Harmony ◽  
Stage Of Development ◽  
Place Assimilation ◽  
Korean Child ◽  
Non Local

Abstract Data collected from one Korean child in a longitudinal diary study present novel patterns of consonant harmony in that labials, coronals, and velars can be triggers and targets of both progressive and regressive non-local place assimilation in an early stage of development. The same child also shows some cases of local regressive place assimilation. In another study where 4 children's data were gathered from a naturalistic longitudinal study, local regressive place assimilation as well as conso-nant harmony is witnessed regardless of place features. In adult Korean, however, only coronal to labial/velar and labial to velar local regressive assimilation occurs. This paper argues that the non-local and local place assimilation is connected and shows that the connection can be accounted for in terms of different constraint rankings within the Optimality-theoretic framework. More specifically, it is shown that the Ident-Onset(place) constraint plays a decisive role even in the early stage of acquisition, unlike child English, accounting for the predominant regressive assimilation. Also, the Agree-Place constraint is exploded into two sub-constraints in Stage 3, capturing the asymmetrical behavior of assimilation. Further, the unranking of place features in early development gradually evolves to the fixed ranking which reflects the universal markedness hierarchy in adult Korean.

Sign in / Sign up

Export Citation Format

Share Document