scholarly journals Upconversion Luminescence of Silica–Calcia Nanoparticles Co-doped with Tm3+ and Yb3+ Ions

Materials ◽  
2021 ◽  
Vol 14 (4) ◽  
pp. 937
Author(s):  
Katarzyna Halubek-Gluchowska ◽  
Damian Szymański ◽  
Thi Ngoc Lam Tran ◽  
Maurizio Ferrari ◽  
Anna Lukowiak
Keyword(s):  
Energy Transfer ◽  
Near Infrared ◽  
Upconversion Luminescence ◽  
Sol Gel ◽  
Emission Spectra ◽  
Transmission Electron ◽  
Characteristic Emission ◽  
Diffraction Patterns ◽  
Size Of Particles ◽  
Average Size

Looking for upconverting biocompatible nanoparticles, we have prepared by the sol–gel method, silica–calcia glass nanopowders doped with different concentration of Tm3+ and Yb3+ ions (Tm3+ from 0.15 mol% up to 0.5 mol% and Yb3+ from 1 mol% up to 4 mol%) and characterized their structure, morphology, and optical properties. X-ray diffraction patterns indicated an amorphous phase of the silica-based glass with partial crystallization of samples with a higher content of lanthanides ions. Transmission electron microscopy images showed that the average size of particles decreased with increasing lanthanides content. The upconversion (UC) emission spectra and fluorescence lifetimes were registered under near infrared excitation (980 nm) at room temperature to study the energy transfer between Yb3+ and Tm3+ at various active ions concentrations. Characteristic emission bands of Tm3+ ions in the range of 350 nm to 850 nm were observed. To understand the mechanism of Yb3+–Tm3+ UC energy transfer in the SiO2–CaO powders, the kinetics of luminescence decays were studied.

Homogeneity in the Polyether Alkoxide Sol‐Gel Synthesis of YBa2Cu3O7-δ

1994 ◽  
Vol 346 ◽  
Author(s):  
Carol S. Houk ◽  
Gary A. Burgoine ◽  
Catherine J. Page
Keyword(s):  
Sol Gel ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Diffraction Patterns ◽  
Mapping Techniques ◽  
Starting Solutions ◽  
Average Size ◽  
Sol Gel Synthesis ◽  
Elemental Maps

ABSTRACTWe have investigated the homogeneity of sol‐gel derived YBa2Cu307‐s from the solution phase to the final product using transmission electron microscopy (TEM), x‐ray diffraction (XRD), and Energy Dispersive X‐ray (EDX) lateral mapping techniques. The starting solutions contain stoichiometric amounts of the metal 2‐(2‐methoxyethoxy)ethoxide components in 2‐(2‐methoxyethoxy)ethanol and appear to be homogeneous by TEM with a uniform distribution of particles having an average size of less than 40 â. Through elemental mapping we see elemental segregation in the high temperature (950 °C) products, which are orthorhombic by XRD. In elemental maps of gel samples fired to 700 °C, which are tetragonal by XRD, we also see elemental inhomogeneity within particles and phase zoning in maps of products from finely ground gels. A comparison of elemental maps and x‐ray diffraction patterns of the products from gel processing and conventional solid state processing is made.

The effect of silver concentration and calcination temperature on structural and optical properties of ZnO:Ag nanoparticles

2015 ◽  
Vol 29 (01) ◽  
pp. 1450254 ◽  
Author(s):  
M. Shayani Rad ◽  
A. Kompany ◽  
A. Khorsand Zak ◽  
M. E. Abrishami
Keyword(s):  
Calcination Temperature ◽  
Sol Gel ◽  
Visible Emission ◽  
X Ray Diffraction ◽  
Ag Nps ◽  
Zno Nps ◽  
Calcination Temperatures ◽  
Transmission Electron ◽  
Xrd Patterns ◽  
Average Size

Pure and silver added zinc oxide nanoparticles ( ZnO -NPs and ZnO : Ag -NPs) were synthesized through a modified sol–gel method. The prepared samples were characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM) and photoluminescence (PL) spectroscopy. In the XRD patterns, silver diffracted peaks were also observed for the samples synthesized at different calcination temperatures of 500°C, 700°C, 900°C except 1100°C, in addition to ZnO . TEM images indicated that the average size of ZnO : Ag -NPs increases with the amount of Ag concentration. The PL spectra of the samples revealed that the increase of Ag concentration results in the increase of the visible emission intensity, whereas by increasing the calcination temperature the intensity of visible emission of the samples decreases.

scholarly journals Energy Transfer Study on Tb3+/Eu3+ Co-Activated Sol-Gel Glass-Ceramic Materials Containing MF3 (M = Y, La) Nanocrystals for NUV Optoelectronic Devices

Materials ◽  
2020 ◽  
Vol 13 (11) ◽  
pp. 2522 ◽  
Author(s):  
Natalia Pawlik ◽  
Barbara Szpikowska-Sroka ◽  
Wojciech A. Pisarski
Keyword(s):  
Heat Treatment ◽  
Energy Transfer ◽  
Glass Ceramic ◽  
Sol Gel ◽  
Optoelectronic Devices ◽  
Emission Spectra ◽  
Ceramic Materials ◽  
Near Ultraviolet ◽  
Glass Ceramic Materials ◽  
Significant Prolongation

In the present work, the Tb3+/Eu3+ co-activated sol-gel glass-ceramic materials (GCs) containing MF3 (M = Y, La) nanocrystals were fabricated during controlled heat-treatment of silicate xerogels at 350 °C. The studies of Tb3+ → Eu3+ energy transfer process (ET) were performed by excitation and emission spectra along with luminescence decay analysis. The co-activated xerogels and GCs exhibit multicolor emission originated from 4fn–4fn optical transitions of Tb3+ (5D4 → 7FJ, J = 6–3) as well as Eu3+ ions (5D0 → 7FJ, J = 0–4). Based on recorded decay curves, it was found that there is a significant prolongation in luminescence lifetimes of the 5D4 (Tb3+) and the 5D0 (Eu3+) levels after the controlled heat-treatment of xerogels. Moreover, for both types of prepared GCs, an increase in ET efficiency was also observed (from ηET ≈ 16% for xerogels up to ηET = 37.3% for SiO2-YF3 GCs and ηET = 60.8% for SiO2-LaF3 GCs). The changes in photoluminescence behavior of rare-earth (RE3+) dopants clearly evidenced their partial segregation inside low-phonon energy fluoride environment. The obtained results suggest that prepared SiO2-MF3:Tb3+, Eu3+ GC materials could be considered for use as optical elements in RGB-lighting optoelectronic devices operating under near-ultraviolet (NUV) excitation.

Preparation of Nanosized TiO2 Synthesized by Sol-Gel Pathway Using Ionic Liquid as Assistant and its Photocatalytic Activities

2012 ◽  
Vol 535-537 ◽  
pp. 2240-2244
Author(s):  
Wei Wei ◽  
Chang Shun Yu ◽  
Shao Jun Wang ◽  
Qing Da An
Keyword(s):  
Ionic Liquid ◽  
Diffuse Reflectance ◽  
Sol Gel ◽  
Rutile Phase ◽  
X Ray Diffraction ◽  
X Ray ◽  
Transmission Electron ◽  
Photocatalytic Activities ◽  
Average Size ◽  
Nanosized Tio2

Nanosized TiO2 particles were synthesized by sol-gel method using ionic liquid as assistant. The samples were characterized by UV-vis diffuse reflectance spectra, X-ray diffraction (XRD), transmission electron microscopy (TEM). It was shown that the phase detectable was mainly rutile phase with uniform sphericity and the average size was 10nm. Along with the rise of sintering temperature, grain diameter became bigger. The photocatalytic activities of nanosized TiO2 were evaluated by the reduction yield in the presence of CO2 and water. The result showed that TiO2 catalysts has efficient photocatalytic activities, of which made with [OMIM]BF4 displayed the highest photocatalytic active in the experiment.

scholarly journals Synthesis of Novel YbxSb2 − xTe3Hexagonal Nanoplates: Investigation of Their Physical, Structural, and Photocatalytic Properties

2014 ◽  
Vol 2014 ◽  
pp. 1-8 ◽  
Author(s):  
Younes Hanifehpour ◽  
Sang Woo Joo
Keyword(s):  
Electron Microscopy ◽  
Emission Spectra ◽  
Hydrothermal Condition ◽  
X Ray Diffraction ◽  
Dopant Content ◽  
Transmission Electron ◽  
Intensity Changes ◽  
Diffraction Patterns ◽  
Green Solution ◽  
Microscopy Images

Yb-doped Sb2Te3nanomaterials were synthesized by a coreduction method in hydrothermal condition. Powder X-ray diffraction patterns indicate that theYbxSb2−xTe3crystals (x=0.00–0.05) are isostructural with Sb2Te3. The cell parameteradecreases forYbxSb2−xTe3compounds upon increasing the dopant content (x), whilecincreases. Scanning electron microscopy and transmission electron microscopy images show that doping of Yb3+ions in the lattice of Sb2Te3produces different morphology. The electrical conductivity of Yb-doped Sb2Te3is higher than the pure Sb2Te3and increases with temperature. By increasing concentration of the Yb3+ions, the absorption spectrum of Sb2Te3shows red shifts and some intensity changes. In addition to the characteristic red emission peaks of Sb2Te3, emission spectra of doped materials show other emission bands originating fromf-ftransitions of the Yb3+ions. The photocatalytic performance of as-synthesized nanoparticles was investigated towards the decolorization of Malachite Green solution under visible light irradiation.

Synthesis and upconversion luminescence properties of CaF2:Yb3+,Er3+ nanoparticles obtained from SBA-15 template

2010 ◽  
Vol 25 (10) ◽  
pp. 2035-2041 ◽  
Author(s):  
Zhiguo Xia ◽  
Peng Du
Keyword(s):  
Electron Microscopy ◽  
Upconversion Luminescence ◽  
Emission Spectra ◽  
Average Diameter ◽  
Cubic Phase ◽  
Pumping Power ◽  
X Ray Diffraction ◽  
Temperature Dependent ◽  
X Ray ◽  
Transmission Electron

CaF2:Yb3+,Er3+ upconversion (UC) luminescence nanoparticles have been synthesized using mesoporous silica (SBA-15) as a hard template. The samples were characterized by x-ray diffraction, Fourier transform infrared spectra, field-emission scanning electron microscopy, transmission electron microscopy, and UC emission spectra, respectively. Highly crystalline cubic phase CaF2:Yb3+,Er3+ nanoparticles are uniformly distributed with an average diameter of about 40–50 nm, and the formation process is also demonstrated. The UC fluorescence has been realized in the as-prepared CaF2:Yb3+,Er3+ nanoparticles on 980-nm excitation. The UC emission transitions for 4F9/2–4I15/2 (red), 2H11/2–4I15/2 (green), 4S3/2–4I15/2 (green), and 2H9/2–4I15/2 (violet) in the Yb3+/Er3+ codoped CaF2 nanoparticles depending on pumping power and temperature have been discussed. The UC mechanism, especially the origin on the temperature-dependent UC emission intensities ratio between 2H11/2 and 4S3/2 levels, have been proposed.

Synthesis and Characterization of SiO2@Y2MoO6:Eu3+ Core–Shell Structured Spherical Phosphors by Sol–Gel Process

2016 ◽  
Vol 16 (4) ◽  
pp. 3914-3920 ◽  
Author(s):  
G. Z Li ◽  
F. H Liu ◽  
Z. S Chu ◽  
D. M Wu ◽  
L. B Yang ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Annealing Temperature ◽  
Uv Light ◽  
Sol Gel ◽  
Spherical Shape ◽  
Core Shell ◽  
X Ray ◽  
Transmission Electron ◽  
Sol Gel Process ◽  
Average Size

SiO2@Y2MoO6:Eu3+ core–shell phosphors were prepared by the sol–gel process. X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), field emission scanning electron microscopy (FESEM), energy-dispersive X-ray spectra (EDS), transmission electron microscopy (TEM), photoluminescence (PL) spectra as well as kinetic decays were used to characterize the resulting SiO2@Y2MoO6:Eu3+ core–shell phosphors. The XRD results demonstrated that the Y2MoO6:Eu3+ layers on the SiO2 spheres crystallized after being annealed at 700 °C and the crystallinity increased with raising the annealing temperature. The obtained core–shell phosphors have spherical shape with narrow size distribution (average size ca. 640 nm), non-agglomeration, and smooth surface. The thickness of the Y2MoO6:Eu3+ shells on the SiO2 cores could be easily tailored by varying the number of deposition cycles (70 nm for four deposition cycles). The Eu3+ shows a strong PL emission (dominated by 5D0–7F2 red emission at 614 nm) under the excitation of 347 nm UV light. The PL intensity of Eu3+ increases with increasing the annealing temperature and the number of coating cycles.

Studies on Optical Properties of CdS/ZnO Quantum Dots Prepared by Sol-Gel Method

2011 ◽  
Vol 364 ◽  
pp. 129-133 ◽  
Author(s):  
Liyana Mohd Lawi Ruhana ◽  
Taqiyuddin Mawardi Ayob Muhammad ◽  
Radiman Shahidan ◽  
Irman Abdul Rahman ◽  
Bohari M. Yamin
Keyword(s):  
Quantum Dots ◽  
Sol Gel ◽  
Emission Spectra ◽  
Blue Shift ◽  
Mixture Ratio ◽  
Gel Method ◽  
Sol Gel Method ◽  
Transmission Electron ◽  
Zno Quantum Dots ◽  
Zno Qds

CdS/ZnO quantum dots (QDs) were prepared at a temperature of 293 K by the sol-gel method with Triethanolamine (TEA) as a capping agent. The effect of CdS/ZnO mixture ratio of 1:9, 1:1 and 9:1 on the optical absorption and fluorescence spectra were investigated by UV-Vis and Fluorescence spectroscopy. By increasing ZnO composition, a blue-shift of absorption edge and emission spectra were observed. The band gap for 1:9, 1:1 and 9:1 were found to be 4.13, 3.93 and 3.11 eV, respectively. The morphology of the CdS/ZnO QDs for each mixing ratio was obtained by transmission electron microscope (TEM). The size of the QDs was found to be in the range of 5-10 nm with some agglomerated particles.

Preparation of ZnO@void@SiO2 Rattle Type Core–Shell Nanoparticles via Layer-by-Layer Method

NANO ◽  
2016 ◽  
Vol 11 (09) ◽  
pp. 1650103 ◽  
Author(s):  
Xiaoman Wang ◽  
Junda Song ◽  
Hongling Chen
Keyword(s):  
Sol Gel ◽  
Carbon Layer ◽  
Layer By Layer ◽  
X Ray Diffraction ◽  
Shell Nanoparticles ◽  
Hexagonal Wurtzite Crystal Structure ◽  
Transmission Electron ◽  
Measurement Results ◽  
Average Size ◽  
Core Shell Nanoparticles

In this paper, we prepared the rattle type nanoparticles ZnO@void@SiO2 by two successive coating processes, followed by heat treatment. The carbon layer was formed over ZnO surface with the aid of the hydrothermal treatment of glucose. Then the resulting composite was used to fabricate a silica shell on the surface by sol–gel method. Finally, ZnO particles were released but still trapped inside the silica hollow after calcination, that is, ZnO@void@SiO2. The composites were characterized by scanning and transmission electron microscope, N2 adsorption experiment, X-ray diffraction, Fourier transform infrared spectroscopy and UV-Vis absorption spectra. The rattle type structure was conformed and the sphere-like structure with the average size of 70 nm and hexagonal wurtzite crystal structure were also observed. The measurement results of optical properties showed even though ZnO@C@SiO2 presented no photocatalysis, ZnO@void@SiO2 showed high activity even the ZnO core was encapsulated with the SiO2 hollow.

Sign in / Sign up

Export Citation Format

Share Document