scholarly journals Optimization of Manufacturing Parameters and Tensile Specimen Geometry for Fused Deposition Modeling (FDM) 3D-Printed PETG

Materials ◽  
2021 ◽  
Vol 14 (10) ◽  
pp. 2556
Author(s):  
Arda Özen ◽  
Dietmar Auhl ◽  
Christina Völlmecke ◽  
Josef Kiendl ◽  
Bilen Emek Abali
Keyword(s):  
Mechanical Properties ◽  
Fused Deposition Modeling ◽  
Tensile Tests ◽  
Tensile Specimen ◽  
Careful Examination ◽  
Uniaxial Tensile ◽  
Fused Deposition ◽  
Design Flexibility ◽  
Deposition Modeling ◽  
3D Printed

Additive manufacturing provides high design flexibility, but its use is restricted by limited mechanical properties compared to conventional production methods. As technology is still emerging, several approaches exist in the literature for quantifying and improving mechanical properties. In this study, we investigate characterizing materials’ response of additive manufactured structures, specifically by fused deposition modeling (FDM). A comparative analysis is achieved for four different tensile test specimens for polymers based on ASTM D3039 and ISO 527-2 standards. Comparison of specimen geometries is studied with the aid of computations based on the Finite Element Method (FEM). Uniaxial tensile tests are carried out, after a careful examination of different slicing approaches for 3D printing. We emphasize the effects of the chosen slicer parameters on the position of failures in the specimens and propose a simple formalism for measuring effective mechanical properties of 3D-printed structures.

scholarly journals The Influence of Raster Angle and Moisture Content on the Mechanical Properties of PLA Parts Produced by Fused Deposition Modeling

Polymers ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 237
Author(s):  
Mohammed Algarni
Keyword(s):  
Mechanical Properties ◽  
Moisture Content ◽  
Fused Deposition Modeling ◽  
Tensile Tests ◽  
Fused Deposition ◽  
Raster Angle ◽  
Deposition Modeling ◽  
3D Printed ◽  
Printed Materials ◽  
Manufacturing Parameters

The additive manufacturing (AM) processes and technologies of 3D-printed materials and components using fused deposition modeling (FDM) are currently very popular and widely used for building parts and prototypes. Many manufacturing parameters can affect the strength and strain of the manufactured parts. The manufacturing parameters may be altered to reach an optimum setting for highly effective parts or components. This research studies the influence of the raster angle and the moisture content percentages on the mechanical properties of 3D printed polylactic acid (PLA) material. The three raster angles tested in this research were 0°, 45°, and 90°. The moisture content of the PLA material was altered to verify its effect on the mechanical properties. Twenty-seven specimens were subjected to tensile tests to examine the effect of different manufacturing parameters. The results show the specimens with a 90° raster angle and 10% moisture content have the optimum strength and strain mechanical properties.

scholarly journals EFFECT OF EXTRUSION PROCESS PARAMETERS ON MECHANICAL PROPERTIES OF 3D PRINTED PLA PRODUCT

2021 ◽  
Vol 6 (2) ◽  
pp. 119
Author(s):  
Nanang Ali Sutisna ◽  
Rakha Amrillah Fattah
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
Fused Deposition Modeling ◽  
Extrusion Process ◽  
Experimental Procedure ◽  
Fused Deposition ◽  
Novel Approach ◽  
Deposition Modeling ◽  
3D Printed ◽  
3D Digital Models

The method of producing items through synchronously depositing material level by level, based on 3D digital models, is named Additive Manufacturing (AM) or 3D-printing. Amongs many AM methods, the Fused Deposition Modeling (FDM) technique along with PLA (Polylactic acid) material is commonly used in additive manufacturing. Until now, the mechanical properties of the AM components could not be calculated or estimated until they've been assembled and checked. In this work, a novel approach is suggested as to how the extrusion process affects the mechanical properties of the printed component to obtain how the parts can be manufactured or printed to achieve improved mechanical properties. This methodology is based on an experimental procedure in which the combination of parameters to achieve an optimal from a manufacturing experiment and its value can be determined, the results obtained show the effect of the extrusion process affects the mechanical properties.

scholarly journals The Effects of Combined Infill Patterns on Mechanical Properties in FDM Process

Polymers ◽  
2020 ◽  
Vol 12 (12) ◽  
pp. 2792
Author(s):  
Mohammadreza Lalegani Dezaki ◽  
Mohd Khairol Anuar Mohd Ariffin
Keyword(s):  
Mechanical Properties ◽  
Computer Aided Design ◽  
Fused Deposition Modeling ◽  
Strength Analysis ◽  
Element Analysis ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
3D Printed ◽  
Complex Features ◽  
Aided Design

Fused deposition modeling (FDM) is commonly used to print different products with highly complex features. Process parameters for FDM are divided into controllable or uncontrollable parameters. The most critical ones are built orientation, layer thickness, infill pattern, infill density, and nozzle diameter. This study investigates the effects of combined infill patterns in 3D printed products. Five patterns (solid, honeycomb, wiggle, grid, and rectilinear) were combined in samples to analyze their effects on mechanical properties for tensile strength analysis. Polylactic acid (PLA) samples were printed in different build orientations through two directions: flat and on-edge. The limitation was that the software and machine could not combine the infill patterns. Thus, the patterns were designed and assembled in computer aided design (CAD) software. Finite element analysis (FEA) was used to determine the patterns’ features and results showed honeycomb and grid have the highest strength while their weights were lighter compared to solid. Moreover, 0° samples in both flat and on-edge direction had the strongest layer adhesion and the best quality. In contrast, perpendicular samples like 60° and 75° showed poor adhesion and were the weakest specimens in both flat and on-edge, respectively. In brief, by increasing the build orientation, the strength decreases in this study.

scholarly journals Effect of Printing Parameters on the Thermal and Mechanical Properties of 3D-Printed PLA and PETG, Using Fused Deposition Modeling

Polymers ◽  
2021 ◽  
Vol 13 (11) ◽  
pp. 1758
Author(s):  
Ming-Hsien Hsueh ◽  
Chao-Jung Lai ◽  
Shi-Hao Wang ◽  
Yu-Shan Zeng ◽  
Chia-Hsin Hsieh ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Thermal Deformation ◽  
Fused Deposition Modeling ◽  
Complex Geometry ◽  
Thermal And Mechanical Properties ◽  
Fused Deposition ◽  
Internal Structures ◽  
Deposition Modeling ◽  
3D Printed ◽  
Printing Parameters

Fused Deposition Modeling (FDM) can be used to manufacture any complex geometry and internal structures, and it has been widely applied in many industries, such as the biomedical, manufacturing, aerospace, automobile, industrial, and building industries. The purpose of this research is to characterize the polylactic acid (PLA) and polyethylene terephthalate glycol (PETG) materials of FDM under four loading conditions (tension, compression, bending, and thermal deformation), in order to obtain data regarding different printing temperatures and speeds. The results indicated that PLA and PETG materials exhibit an obvious tensile and compression asymmetry. It was observed that the mechanical properties (tension, compression, and bending) of PLA and PETG are increased at higher printing temperatures, and that the effect of speed on PLA and PETG shows different results. In addition, the mechanical properties of PLA are greater than those of PETG, but the thermal deformation is the opposite. The above results will be a great help for researchers who are working with polymers and FDM technology to achieve sustainability.

scholarly journals Mechanical Properties of FDM Printed PLA Parts before and after Thermal Treatment

Polymers ◽  
2021 ◽  
Vol 13 (8) ◽  
pp. 1239
Author(s):  
Ali Chalgham ◽  
Andrea Ehrmann ◽  
Inge Wickenkamp
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Process Parameters ◽  
Fused Deposition Modeling ◽  
Poly Lactic Acid ◽  
Three Point Bending ◽  
Fused Deposition ◽  
Before And After ◽  
Deposition Modeling ◽  
3D Printed

Fused deposition modeling (FDM) is one of the most often-used technologies in additive manufacturing. Several materials are used with this technology, such as poly(lactic acid) (PLA), which is most commonly applied. The mechanical properties of 3D-printed parts depend on the process parameters. This is why, in this study, three-point bending tests were carried out to characterize the influence of build orientation, layer thickness, printing temperature and printing speed on the mechanical properties of PLA samples. Not only the process parameters may affect the mechanical properties, but heat after-treatment also has an influence on them. For this reason, additional samples were printed with optimal process parameters and characterized after pure heat treatment as well as after deformation at a temperature above the glass transition temperature, cooling with applied deformation, and subsequent recovery under heat treatment. These findings are planned to be used in a future study on finger orthoses that could either be printed according to shape or in a flat shape and afterwards heated and bent around the finger.

Characterization of PLA/TPU composite filaments manufactured for 3D printing with FDM

2021 ◽  
pp. 089270572110625
Author(s):  
Ajay Jayswal ◽  
Sabit Adanur
Keyword(s):  
3D Printing ◽  
Fused Deposition Modeling ◽  
Thermoplastic Polyurethane ◽  
Tensile Tests ◽  
Optical Microscope ◽  
Mechanical Analysis ◽  
Uniaxial Tensile ◽  
Scanning Calorimetry ◽  
Fused Deposition ◽  
3D Printed

Polylactic acid (PLA) and thermoplastic polyurethane (TPU) were mixed in different proportions and extruded through twin-screw and single-screw extruders to obtain composite filaments to be used for 3D printing with fused deposition modeling (FDM) method. The properties of the filaments were characterized using uniaxial tensile tests, differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FTIR), rheology, polarized optical microscope (POM), and scanning electron microscope (SEM). 3D printed samples from composite filaments were tested using dynamic mechanical analysis (DMA). It was found that the tensile strength and modulus of the filaments decrease while elongation at break increases with the increasing TPU content in the composite. The analysis also showed a partial miscibility of the polymer constituents in the solution of composite filaments. Finally, a flexible structure, plain weave fabric, was designed and 3D printed using the composite filaments developed which proved that the filaments are well suited for 3D printing.

The Mechanical Characteristics of 3D Printed Parts According to the Build Orientation

2014 ◽  
Vol 474 ◽  
pp. 381-386 ◽  
Author(s):  
Petr Zelený ◽  
Jiří Šafka ◽  
Irina Elkina
Keyword(s):  
Rapid Prototyping ◽  
Fused Deposition Modeling ◽  
Mechanical Characteristics ◽  
Tensile Tests ◽  
Physical Models ◽  
Build Orientation ◽  
Fused Deposition ◽  
Deposition Modeling ◽  
Component Element ◽  
3D Printed

This article is focused on a production of mechanically resistant physical models using Rapid Prototyping technology. There are two tested materials, ABS is the first build material and ABS-like is the second build material with similar properties. The article describes the production of a testing component - element for tensile tests by two RP technologies. The first technology is FDM (Fused Deposition Modeling) and the second PolyJet Matrix. Further the article describes the description and evaluation of the tensile tests.

scholarly journals FDM 3D Printing of Polymers Containing Natural Fillers: A Review of their Mechanical Properties

Polymers ◽  
2019 ◽  
Vol 11 (7) ◽  
pp. 1094 ◽  
Author(s):  
Valentina Mazzanti ◽  
Lorenzo Malagutti ◽  
Francesco Mollica
Keyword(s):  
Mechanical Properties ◽  
3D Printing ◽  
Fused Deposition Modeling ◽  
Natural Fibers ◽  
Acrylonitrile Butadiene Styrene ◽  
Processing Parameters ◽  
Fused Deposition ◽  
Additive Formulation ◽  
Deposition Modeling ◽  
3D Printed

As biodegradable thermoplastics are more and more penetrating the market of filaments for fused deposition modeling (FDM) 3D printing, fillers in the form of natural fibers are convenient: They have the clear advantage of reducing cost, yet retaining the filament biodegradability characteristics. In plastics that are processed through standard techniques (e.g., extrusion or injection molding), natural fibers have a mild reinforcing function, improving stiffness and strength, it is thus interesting to evaluate whether the same holds true also in the case of FDM produced components. The results analyzed in this review show that the mechanical properties of the most common materials, i.e., acrylonitrile-butadiene-styrene (ABS) and PLA, do not benefit from biofillers, while other less widely used polymers, such as the polyolefins, are found to become more performant. Much research has been devoted to studying the effect of additive formulation and processing parameters on the mechanical properties of biofilled 3D printed specimens. The results look promising due to the relevant number of articles published in this field in the last few years. This notwithstanding, not all aspects have been explored and more could potentially be obtained through modifications of the usual FDM techniques and the devices that have been used so far.

Sign in / Sign up

Export Citation Format

Share Document