scholarly journals Effect of Heat Treatment Conditions on Corrosion Resistance of 0.28C–1.4Mn–0.3Si–0.26Cr Steel with Nb, Ti, and V Microadditions

Materials ◽  
2021 ◽  
Vol 14 (12) ◽  
pp. 3254
Author(s):  
Anna Wojtacha ◽  
Monika Kciuk ◽  
Marek Opiela
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
Sea Water ◽  
Salt Spray ◽  
Gravimetric Method ◽  
High Strength ◽  
Offshore Drilling ◽  
Treatment Conditions ◽  
Corrosive Environments ◽  
Martensite Microstructure

The article presents the results of the research on the influence of heat treatment conditions on corrosion resistance of newly developed HSLA-type (High Strength Low Alloy) steel in selected corrosive environments. Laboratory tests were carried out with using a salt spray chamber, enabling the continuous spraying of brine mist (5% NaCl) during 96 h under high humidity conditions. Additionally, as part of corrosion experiments, tests were carried out using the gravimetric method, in which the intensity of corrosive processes was measured by the linear corrosion rate. The research conducted revealed that the best corrosion resistance was noted for steel with a high-temperature tempered martensite microstructure. Investigated 0.28C–1.4Mn–0.3Si–0.26Cr steel with Nb, Ti, and V microadditions can be used in offshore drilling constructions and production platforms exposed to salts present in sea water, chlorides, sulfates, carbonates, and bromides, among others.

CONFLEX 720

Alloy Digest ◽  
1964 ◽  
Vol 13 (7) ◽  
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Surface Treatment ◽  
Nickel Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Age Hardening ◽  
Copper Manganese ◽  
Hardening Heat Treatment

Abstract CONFLEX 720 is a copper-manganese-nickel alloy that responds to an age-hardening heat treatment for high strength and corrosion resistance. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as heat treating, machining, joining, and surface treatment. Filing Code: Cu-143. Producer or source: Metals & Controls Inc..

ALUMINUM A356

Alloy Digest ◽  
1969 ◽  
Vol 18 (11) ◽  
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
High Strength ◽  
Heat Treating ◽  
Age Hardening ◽  
Casting Alloy ◽  
Permanent Mold ◽  
Aluminum Company ◽  
Mold Casting ◽  
Hardening Heat Treatment

Abstract Aluminum A356 is a sand and permanent mold casting alloy that responds to an age-hardening heat treatment. It is recommended for aircraft and missile components where high strength and corrosion resistance are required. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive and shear strength as well as fatigue. It also includes information on heat treating, machining, and joining. Filing Code: Al-192. Producer or source: Aluminum Company of America.

TELNIC BRONZE

Alloy Digest ◽  
1953 ◽  
Vol 2 (1) ◽  
Keyword(s):  
Heat Treatment ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
Base Alloy ◽  
Cold Work ◽  
High Strength ◽  
Heat Treating ◽  
Hot Workability ◽  
Copper Base ◽  
Copper Base Alloy

Abstract Chase TELNIC BRONZE is a high strength copper-base alloy, hardenable both by heat treatment and cold work, and also having good conductivity, corrosion resistance, cold and hot workability, and excellent machinability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: Cu-4. Producer or source: Chase Brass & Copper Company Inc..

scholarly journals Achievement of High Strength and Ductility in Al–Si–Cu–Mg Alloys by Intermediate Phase Optimization in As-Cast and Heat Treatment Conditions

Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 647 ◽  
Author(s):  
Bingrong Zhang ◽  
Lingkun Zhang ◽  
Zhiming Wang ◽  
Anjiang Gao
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Tensile Strength ◽  
Ultimate Tensile Strength ◽  
Intermediate Phase ◽  
High Strength ◽  
Mg Alloys ◽  
Artificial Ageing ◽  
Treatment Conditions ◽  
Eutectic Si

In order to obtain high-strength and high-ductility Al–Si–Cu–Mg alloys, the present research is focused on optimizing the composition of soluble phases, the structure and morphology of insoluble phases, and artificial ageing processes. The results show that the best matches, 0.4 wt% Mg and 1.2 wt% Cu in the Al–9Si alloy, avoided the toxic effect of the blocky Al2Cu on the mechanical properties of the alloy. The addition of 0.6 wt% Zn modified the morphology of eutectic Si from coarse particles to fine fibrous particles and the texture of Fe-rich phases from acicular β-Fe to blocky π-Fe in the Al–9Si–1.2Cu–0.4Mg-based alloy. With the optimization of the heat treatment parameters, the spherical eutectic Si and the fully fused β-Fe dramatically improved the ultimate tensile strength and elongation to fracture. Compared with the Al–9Si–1.2Cu–0.4Mg-based alloy, the 0.6 wt% Zn modified alloy not only increased the ultimate tensile strength and elongation to fracture of peak ageing but also reduced the time of peak ageing. The following improved combination of higher tensile strength and higher elongation was achieved for 0.6 wt% Zn modified alloy by double-stage ageing: 100 °C × 3 h + 180 °C × 7 h, with mechanical properties of ultimate tensile strength (UTS) of ~371 MPa, yield strength (YS) of ~291 MPa, and elongation to fracture (E%) of ~5.6%.

Effects of Heat Treatment on Microstructure Parameters, Mechanical Properties and Cold Resistance of Sparingly Alloyed High-Strength Steel

2021 ◽  
Vol 410 ◽  
pp. 197-202
Author(s):  
Pavel P. Poleckov ◽  
Olga A. Nikitenko ◽  
Alla S. Kuznetsova
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Cold Resistance ◽  
Heating Temperature ◽  
High Strength ◽  
Steel Microstructure ◽  
Treatment Conditions ◽  
Microstructure Parameters ◽  
Temperature Impact ◽  
Low Temperature Impact Toughness

This study considers the influence of various heat treatment conditions on the change of steel microstructure parameters, mechanical properties and cold resistance at a temperature of-60 °C. The common behavior of these properties is considered depending on the heating temperature used for quenching and subsequent tempering. Based on the obtained results, heat treatment conditions are proposed that provide a combination of a guaranteed yield point σ0.2 ≥600 N/mm2 with a low-temperature impact toughness KCV-60 ≥50 J/cm2 and plasticity δ5 ≥17%. The obtained research results are intended for industrial use at the mill "5000" site of MMK PJSC.

RAFFMETAL EN AB-Al Si7Mg0.3 (EN AB-42100)

Alloy Digest ◽  
2021 ◽  
Vol 70 (9) ◽  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Corrosion Resistance ◽  
High Strength ◽  
Heat Treating ◽  
Magnesium Content ◽  
Casting Alloy ◽  
Permanent Mold ◽  
Good Corrosion Resistance ◽  
Wide Range

Abstract Raffmetal EN AB-Al Si7Mg0.3 (EN AB-42100) is a heat-treatable, Al-Si-Mg casting alloy in ingot form for remelting. It is used extensively for producing sand, permanent mold and investment castings for applications requiring a combination of excellent casting characteristics, high strength with good elongation, and good corrosion resistance. This alloy can be produced to a wide range of mechanical properties by making small adjustments to the magnesium content and/or heat treatment. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as casting, heat treating, machining, and joining. Filing Code: Al-480. Producer or source: Raffmetal S.p.A.

Sign in / Sign up

Export Citation Format

Share Document