scholarly journals Thermo-Physiological Comfort Properties of Sportswear with Different Combination of Inner and Outer Layers

Materials ◽  
2021 ◽  
Vol 14 (22) ◽  
pp. 6863
Author(s):  
Desalegn Atalie ◽  
Pavla Tesinova ◽  
Melkie Getnet Tadesse ◽  
Eyasu Ferede ◽  
Ionuț Dulgheriu ◽  
...  
Keyword(s):  
Thermal Properties ◽  
Water Vapor ◽  
Heat Flow ◽  
Thermal Resistance ◽  
Outer Layer ◽  
Water Vapor Permeability ◽  
Flow Density ◽  
Vapor Permeability ◽  
Heat Flow Density ◽  
Time Activity

Consumers expect high-performance functionality from sportswear. To meet athletic and leisure-time activity requirements, further research needs to be carried out. Sportswear layers and their specific thermal qualities, as well as the set and air layer between materials, are all important factors in sports clothing. This research aims to examine the thermal properties of sports fabrics, and how they are affected by structure parameters and maintained with different layers. Three inner and four outer layers of fabric were used to make 12 sets of sportswear in this study. Before the combination of outer and inner layers, thermal properties were measured for each individual layer. Finally, the thermal resistance, thermal conductivity, thermal absorptivity, peak heat flow density ratio, stationary heat flow density, and water vapor permeability of bi-layered sportswear were evaluated and analyzed. The findings show that sportswear made from a 60% cotton/30% polyester/10% elastane inner layer and a 100% polyester outer layer had the maximum thermal resistance of 61.16 (×103 K·m2 W−1). This performance was followed by the sample made from a 90% polyester/10% elastane inner layer and a 100% polyester outer layer, and the sample composed of a 100% elastane inner layer and a 100% polyester outer layer, which achieved a thermal resistance value of 60.41 and 59.41 (×103 K·m2 W−1), respectively. These results can be explained by the fact that thicker textiles have a higher thermal resistance. This high-thermal-resistance sportswear fabric is appropriate for the winter season. Sportswear with a 90% polyester/10% elastane inner layer had worse water vapor resistance than sportswear with a 60% cotton/30% polyester/10% elastane and a 100% elastane layer. Therefore, these sports clothes have a higher breathability and can provide the wearers with very good comfort. According to the findings, water vapor permeability of bi-layered sportswear is influenced by geometric characteristics and material properties.

Influence of Structure Variation and Finishing on Woven Fabric Thermal Properties

2018 ◽  
Vol 26 (1(127)) ◽  
pp. 120-124
Author(s):  
Iwona Frydrych ◽  
Goran Demboski
Keyword(s):  
Thermal Properties ◽  
Heat Flow ◽  
Thermal Resistance ◽  
Woven Fabrics ◽  
Woven Fabric ◽  
Weft Yarn ◽  
Flow Density ◽  
Heat Flow Density ◽  
Stationary Heat ◽  
Yarn Count

The paper investigates the influence of fabric structure variations and finishing on the thermal properties of woven fabrics for a tailored garment. Four distinctive pairs of fabrics were investigated, where the weft density, weft yarn count or type and finishing were varied within the fabrics in each pair. Several thermal properties such as conductivity, diffusivity, absorptivity, resistance, the ratio of maximal and stationary heat flow density and the stationary heat flow density were measured using an Alambeta device. The results obtained showed that variation of the weft yarn count and finishing have a significant effect on several thermal properties. Increasing the weft count increased the thermal conductivity, absorptivity, resistance and the ratio of maximal and stationary heat flow density. The application of oilproof and waterproof finishing affected thermal diffusivity, thermal absorptivity and thermal resistance. Milled finishing contributed to increasing the thermal resistance.

scholarly journals Development of PE/PCL Bilayer Films Modified with Casein and Aluminum Oxide

Molecules ◽  
2021 ◽  
Vol 26 (11) ◽  
pp. 3090
Author(s):  
Anita Ptiček Siročić ◽  
Ana Rešček ◽  
Zvonimir Katančić ◽  
Zlata Hrnjak-Murgić
Keyword(s):  
Mechanical Properties ◽  
Thermal Properties ◽  
Water Vapor ◽  
Aluminum Oxide ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Mechanical And Thermal Properties ◽  
Oxide Compound ◽  
Bilayer Films ◽  
Oxide Particles

The studied samples were prepared from polyethylene (PE) polymer which was coated with modified polycaprolactone (PCL) film in order to obtain bilayer films. Thin PCL film was modified with casein/aluminum oxide compound to enhance vapor permeability as well as mechanical and thermal properties of PE/PCL films. Casein/aluminum oxide modifiers were used in order to achieve some functional properties of polymer film that can be used in various applications, e.g., reduction of water vapor permeability (WVTR) and good mechanical and thermal properties. Significant improvement was observed in mechanical properties, especially in tensile strength as well as in water vapor values. Samples prepared with aluminum oxide particles indicated significantly lower values up to 60%, and samples that were prepared with casein and 5% Al2O3 showed the lowest WVTR value.

scholarly journals Thermo-physiological properties of woven structures in wet state

2018 ◽  
Vol 69 (04) ◽  
pp. 298-303
Author(s):  
BOUGHATTAS AMAL ◽  
BENLTOUFA SOFIEN ◽  
HES LUBOS ◽  
AZEEM MUSADDAQ ◽  
FAYALA FATEN
Keyword(s):  
Thermal Properties ◽  
Water Vapor ◽  
Moisture Content ◽  
Water Vapor Permeability ◽  
Woven Fabric ◽  
Weft Yarn ◽  
Vapor Permeability ◽  
Skin Contact ◽  
Woven Structures ◽  
Woven Structure

The utmost parameters that measure the thermo-physiological comfort of garments are thermal conductivity, thermal absorptivity and water vapor permeability. In this paper, thermo-physiological comfort was studied with different weave design and moisture content. Thermal properties and water vapor permeability in dry and wet state of all fabric samples were determined by ALAMBETA and Permetest respectively. Results showed that the weaving structure and yarn composition in weft were closely related to the thermal properties and water vapor permeability in presence of moisture. Woven fabric samples were constructed by varying the weave design and weft composition. In wet state, moisture content up to 20%, weave structures exhibited non-significant behavior for thermal properties due to air fraction. As the moisture content enhanced, woven structure made with polyester weft yarn provided cooler feeling with skin contact.

Modification of Microfiber Synthetic Leather Base and Model by Collagen

2015 ◽  
Vol 10 (2) ◽  
pp. 155892501501000 ◽  
Author(s):  
Xuechuan Wang ◽  
Xiaoqin Wang ◽  
Taotao Qiang ◽  
Longfang Ren ◽  
Peiyi Wang
Keyword(s):  
Thermal Properties ◽  
Water Vapor ◽  
Moisture Absorption ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Amino Group ◽  
Test Results ◽  
Average Roughness ◽  
Treated Sample ◽  
Sample Water

Modified by the pretreated model with collagen under the crosslinking effect of glutaraldehyde, the moisture absorption of modified samples increased by 26.34% and 42.6%. The test results of SEM, AFM and DSC show that there was coating on the fibers modified with collagen, and the relative average roughness of the modified fabric decreased. Modification with collagen also affected the thermal properties of the modified sample compared with that of the non-treated sample. Modification of the base with collagen in the same way that modified the model, the result indicate that the contents of amino group on the modified base sample were 1.61 times and 8.15 times compared with that of pretreated sample and non-treated sample, water vapor permeability of collagen modified samples increased by 28.58% and 53.43% respectively.

scholarly journals Thermal resistance testing of standard and protective filtering military garment on the burning napalm mixture

2013 ◽  
Vol 67 (6) ◽  
pp. 941-950 ◽  
Author(s):  
Dusan Rajic ◽  
Zeljko Kamberovic ◽  
Radovan Karkalic ◽  
Negovan Ivankovic ◽  
Zeljko Senic
Keyword(s):  
Water Vapor ◽  
Thermal Resistance ◽  
Active Carbon ◽  
Thermal Protection ◽  
Water Vapor Permeability ◽  
Air Permeability ◽  
Resistance Testing ◽  
Vapor Permeability ◽  
Military Uniform ◽  
Sandwich Materials

Fires are an accompanying manifestation in modern weaponry use and in case of different accidents in peacetime. The standard military uniform is a primary barrier in protection of a soldier?s body from all external influences, including the thermal ones which can cause burns. The minimum thermal resistance to the effect of burning napalm mixture (BNM) in individual uniform garment materials has been determined, and is higher at simultaneous use of more materials one over another (the so-called sandwich materials), where the best thermal protection give sandwich materials with an air interspace. The requirement for the thermal resistance of the material of the filtrating protective suit (FPS) to the effect of BNM (? 15 s) has been fully met. The highest thermal resistance has been demonstrated by the FPS whose inner layer is made of polyurethane foam with active carbon. A proportional dependence between the thermal resistance of FPS to the effect of BNM and water vapor permeability through this garment mean has been determined, and reversed in respect to air permeability.

Novel method on thermal resistance prediction and thermo-physiological comfort of socks in a wet state

2020 ◽  
Vol 90 (17-18) ◽  
pp. 1987-2006 ◽  
Author(s):  
Tariq Mansoor ◽  
Lubos Hes ◽  
Vladimir Bajzik ◽  
Muhammad Tayyab Noman
Keyword(s):  
Thermal Conductivity ◽  
Water Vapor ◽  
Thermal Resistance ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Relative Water ◽  
Novel Method ◽  
Resistance Prediction ◽  
Filling Coefficient ◽  
Thermal Absorptivity

The present study proposes a novel method to measure the thermal resistance and comfort properties of various sock samples under wet conditions. Theoretically, comfort properties are responsible for transporting moisture by our body with different rates. Therefore, plain socks with different fiber composition were wetted to a saturated level and after getting the required moisture content, the sock samples were characterized by Alambeta (for thermal resistance and thermal absorptivity) and Permetest instruments for relative water vapor permeability in the wet state. In addition, various skin models were utilized to make a comparison of thermal resistance in the dry state. Two different models were modified for analyzing the thermal resistance under wet conditions. According to the models used, the prediction of thermal resistance is a combined effect of the filling coefficient and thermal conductivity of wet polymers instead of dry polymers. With these modifications, the used models predicted the thermal resistance at different moisture levels with a significant correlation ( R2) value, that is, 0.84–0.97.

Thermal comfort performances of cellulosic socks evaluated by a foot manikin system and moisture management tester

2019 ◽  
Vol 31 (2) ◽  
pp. 272-283 ◽  
Author(s):  
Sibel Kaplan ◽  
Ceren Karaman
Keyword(s):  
Water Vapor ◽  
Thermal Resistance ◽  
Thermal Comfort ◽  
Water Vapor Permeability ◽  
Vapor Permeability ◽  
Thermal Manikin ◽  
Content Type ◽  
Cellulosic Fibers ◽  
Moisture Management ◽  
Liquid Transfer

Purpose The purpose of this paper is to investigate thermal comfort performances of socks produced from cotton and regenerated cellulosic fiber yarns by thermal resistance (by a newly designed foot thermal manikin), moisture management tester (MMT) parameters and permeability (air and water vapor) tests. Design/methodology/approach Single jersey fabrics and socks were knitted from 30 Ne yarns produced from cotton, different regenerated cellulosic fibers (viscose, modal, bamboo, micromodal, Tencel®, Tencel LF®) and their blends. Thermal resistances of the socks were compared by a newly developed thermal foot manikin in a more realistic way than measurements in fabric form. Besides air and water vapor permeability, moisture management parameters of the fabrics were tested to differentiate performances of cellulosic fibers. Findings Results show that air permeability, liquid absorption and transfer parameters measured by MMT are generally identical and better for regenerated cellulosic fabrics than cotton. Micromodal and Tencel® have better performances for liquid transfer and overall moisture management capacities are superior for bamboo and Tencel LF®. Thermal resistances of the socks are minimum for Tencel LF® having a cross-linked structure and maximum for viscose socks. Originality/value It is thought that thermal resistance measured in socks form is more realistic than fabric measurements and results of this study that can be valid for all knitted garments. Moreover, comprehensive material plan of the study is valuable for getting reliable results for regenerated cellulosic fibers that have small differences in cases of thermal resistance and liquid transfer.

Sign in / Sign up

Export Citation Format

Share Document