scholarly journals Flexible Ni/NiOx-Based Sensor for Human Breath Detection

Materials ◽  
2021 ◽  
Vol 15 (1) ◽  
pp. 47
Author(s):  
Le Duc-Anh Ho ◽  
Vu Binh Nam ◽  
Daeho Lee
Keyword(s):  
Photoelectron Spectroscopy ◽  
Mechanical Stability ◽  
Gas Sensing ◽  
Single Layer ◽  
Fast Response ◽  
Single Step ◽  
Chemical Components ◽  
Human Breath ◽  
Flexible Polymer ◽  
Recovery Times

We developed a simple methodology to fabricate an Ni/NiOx-based flexible breath sensor by a single-step laser digital patterning process of solution-processed NiOx thin-film deposited using NiOx nanoparticle ink. Laser-induced reductive sintering phenomenon enables for the generation of three parts of Ni electrodes and two narrow NiOx-sensing channels in between, defined on a single layer on a thin flexible polymer substrate. The Ni/NiOx-based breath sensor efficiently detects human breath at a relatively low operating temperature (50 °C) with fast response/recovery times (1.4 s/1.7 s) and excellent repeatability. The mechanism of the gas-sensing ability enhancement of the sensor was investigated by X-ray photoelectron spectroscopy analysis. Furthermore, by decoupling of the temperature effect from the breathing gas, the response of the sensor due to the temperature alone and due to the chemical components in the breathing gas could be separately evaluated. Finally, bending and cyclic bending tests (10,000 cycles) demonstrated the superior mechanical stability of the flexible breath sensor.

scholarly journals Highly sensitive and selective sensing of H2S gas using precipitation and impregnation-made CuO/SnO2 thick films

2021 ◽  
Author(s):  
Pimpan Leangtanom ◽  
Anurat Wisitsoraat ◽  
Kata Jaruwongrangsee ◽  
Narong Chanlek ◽  
Adisorn Tuantranont ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Gas Sensing ◽  
Fast Response ◽  
Potential Candidate ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cu Content ◽  
Transmission Electron ◽  
Highly Sensitive

Abstract In this work, CuO-loaded tetragonal SnO2 nanoparticles (CuO/SnO2 NPs) were synthesized using precipitation/impregnation methods with varying Cu contents of 0–25 wt% and characterized for H2S detection. The material phase, morphology, chemical composition and specific surface area of NPs were evaluated using X-ray diffraction, transmission electron microscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy and Brunauer-Emmett-Teller analysis. From gas-sensing data, the H2S responses of SnO2 NPs were greatly enhanced by CuO loading particularly at the optimal Cu content of 20 wt%. The 20 wt%CuO/SnO2 sensor showed an excellent response of 1.36⋅105 towards 10 ppm H2S and high H2S selectivity against H2, SO2, CH4 and C2H2 at a low optimum working temperature of 200°C. In addition, the sensor provided fast response and a low detection limit of less than 0.15 ppm. The CuO-SnO2 sensor could therefore be a potential candidate for H2S detection in environmental applications.

scholarly journals Zirconia Nanotube Coatings - UV-Resistant Superhydrophobic Surfaces

2021 ◽  
Author(s):  
Swathi Naidu Vakamulla Raghu ◽  
Manuela S Killian ◽  
Khajidkhand Chuluunbandi
Keyword(s):  
Photoelectron Spectroscopy ◽  
Mechanical Stability ◽  
Single Step ◽  
Superhydrophobic Surfaces ◽  
Electrochemical Anodization ◽  
Oxide Surfaces ◽  
Metal Oxide Surfaces ◽  
Superhydrophobic Coatings ◽  
Assembled Monolayers ◽  
Nanostructured Oxide

Surface modifications influence material interactions such as wettability, imparting hydrophobicity or hydrophilicity. Mainstream research focused on enhancing product shelf-life, directs attention towards superhydrophobic surfaces (SHS). SHS offer several benefits for outdoor applications such as self-cleaning, anti-soiling, anti-mist etc. In this manuscript, we explore the possibility of combining structural and chemical modifications to metal substrates in order to create superhydrophobic metal oxide surfaces. ZrO2-nanotubes are evaluated with regard to their application as transparent UV-stable superhydrophobic coatings. Nanostructured oxide surfaces are created via single-step electrochemical anodization. The absence of HF acid-based pre-etching steps offer a safe and alternatively a green synthesis route. Anodized oxides are modified using octadecylphosphonic acid self-assembled monolayers, demonstrate superhydrophobicity and are evaluated for their mechanical stability under a jet of water, chemical stability under indirect sunlight irradiation in air/water and direct UV exposure. Zirconia nanotubular films were evaluated for optical transparency using light microscopy and surface wettability of the different zirconia-composites was compared to the model system-titania. Structural and compositional differences of the SAM layer upon time dependent decay were analyzed with X-ray photoelectron spectroscopy. <br>

Enhanced Gas Sensing of Tin Dioxide Based Sensor for Indoor Formaldehyde Application

2021 ◽  
Vol 16 (2) ◽  
pp. 337-342
Author(s):  
Gaoqi Zhang ◽  
Fan Zhang ◽  
Kaifang Wang ◽  
Shanyu Liu ◽  
Ying Wang ◽  
...  
Keyword(s):  
Gas Sensors ◽  
Tin Dioxide ◽  
Gas Sensing ◽  
Fast Response ◽  
Sensing Material ◽  
Gas Sensing Properties ◽  
Recovery Times ◽  
Response And Recovery ◽  
Formaldehyde Sensing ◽  
Gas Response

Indoor formaldehyde detection is of great important at present. Using efficient solvothermal method, nanosheet-constructed and nanorod-constructed hierarchical tin dioxide (SnO2) microspheres were successfully synthesized in this work and used for the gas sensing material for indoor formaldehyde application. The as-prepared two kinds of SnO2 gas sensing materials were applied to fabricate the gas sensors and formaldehyde gas sensing experiments were carried out. The HCHO gas sensing tests indicate that the gas response of the nanosheet-constructed SnO2 microspheres is about 1.7 times higher than that of the nanorod-constructed SnO2 microspheres. In addition, both of the two SnO2 based gas sensors show almost fast response and recovery time to HCHO gas. For the nanosheet-constructed microspheres, the response value is estimated to be 32.0 at 350 °C to 60 ppm formaldehyde gas, while the response and recovery times are 7 and 5 s, respectively. The simple and efficient preparation method and improved gas sensing properties show that the as-synthesized hierarchical SnO2 microsphere that is constructed by a large amount of nanosheets exhibits significant potential application for the indoor formaldehyde sensing.

NO2 Gas Sensor Based on SnSe/SnSe2p-n Hetrojunction

2021 ◽  
Vol 21 (9) ◽  
pp. 4779-4785
Author(s):  
Sanju Rani ◽  
Manoj Kumar ◽  
Yogesh Singh ◽  
Monika Tomar ◽  
Anjali Sharma ◽  
...  
Keyword(s):  
Room Temperature ◽  
Gas Sensing ◽  
Limit Of Detection ◽  
Fast Response ◽  
Desorption Kinetics ◽  
Low Concentration ◽  
Sensing Applications ◽  
Recovery Times ◽  
Nanostructured Sensor ◽  
Evaporation Technique

Air pollution is a big concern as it causes harm to human health as well as environment. NO2 can cause several respiratory diseases even in low concentration and therefore an efficient sensor for detecting NO2 at room temperature has become one of the priorities of the scientific community. Although two dimensional (2D) materials (MoS2 etc.) have shown potential for NO2 sensing at lower temperatures, but these have poor desorption kinetics. However, these limitations posed by slow desorption can be overcome, if a material in the form of a p-n junction can be suitably employed. In this work, ~150 nm thick SnSe2 thin film has been deposited by thermally evaporating in-house made SnSe2 powder. The film has been studied for its morphological, structural and gas sensing applications. The morphology of the film showed that the film consists of interconnected nanostructures. Detailed Raman studies further revealed that SnSe2 film had 31% SnSe. The SnSe-SnSe2 nanostructured sensor showed a response of ~112% towards 5 ppm NO2 at room temperature (30 °C). The response and recovery times were ~15 seconds and 10 seconds, respectively. Limit of detection for NO2 was in sub-parts per million (sub-ppm) range. The device demonstrated a better response towards NO2 compared to NH3, CH4, and H2. The mechanism of room temperature fast response, recovery and selective detection of NO2 independent of humidity conditions has been discussed based on physisorption, charge transfer, and formation of SnSe-SnSe2 (p-n) nano-junctions. Depositing a nanostructured film consisting of nano-junctions using an industrially viable thermal evaporation technique for sensing a very low concentration of NO2 is the novelty of this work.

scholarly journals Facile Chemical Bath Synthesis of SnS Nanosheets and Their Ethanol Sensing Properties

Sensors ◽  
2019 ◽  
Vol 19 (11) ◽  
pp. 2581 ◽  
Author(s):  
Wei Shan ◽  
Zhengqian Fu ◽  
Mingsheng Ma ◽  
Zhifu Liu ◽  
Zhenggang Xue ◽  
...  
Keyword(s):  
High Performance ◽  
Gas Sensing ◽  
Raw Materials ◽  
Orthorhombic Phase ◽  
Ethanol Vapor ◽  
Fast Response ◽  
Sensing Applications ◽  
Recovery Times ◽  
Response And Recovery ◽  
Ethanol Sensing

Tin(II) monosulfide (SnS) nanosheets were synthesized using SnCl4•5H2O and S powders as raw materials in the presence of H2O via a facile chemical bath method. Orthorhombic phase SnS nanosheets with a thickness of ~100 nm and lateral dimensions of 2~10 μm were obtained by controlling the synthesis parameters. The formation of a SnO2 intermediate is key to the valence reduction of Sn ions (from IV to II) and the formation of SnS. The gas sensors fabricated from SnS nanosheets exhibited an excellent response of 14.86 to 100 ppm ethanol vapor when operating at 160 °C, as well as fast response and recovery times of 23 s and 26 s, respectively. The sensors showed excellent selectivity for the detection of ethanol over acetone, methanol, and ammonia gases, which indicates the SnS nanosheets are promising for high-performance ethanol gas sensing applications.

scholarly journals Highly Sensitive and Selective Sensing of H2S Gas Using Precipitation and Impregnation-Made CuO/SnO2 Thick Films

2021 ◽  
Vol 16 (1) ◽  
Author(s):  
Pimpan Leangtanom ◽  
Anurat Wisitsoraat ◽  
Kata Jaruwongrangsee ◽  
Narong Chanlek ◽  
Adisorn Tuantranont ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Photoelectron Spectroscopy ◽  
Gas Sensing ◽  
Fast Response ◽  
Potential Candidate ◽  
X Ray Diffraction ◽  
X Ray ◽  
Cu Content ◽  
Transmission Electron ◽  
Highly Sensitive

AbstractIn this work, CuO-loaded tetragonal SnO2 nanoparticles (CuO/SnO2 NPs) were synthesized using precipitation/impregnation methods with varying Cu contents of 0–25 wt% and characterized for H2S detection. The material phase, morphology, chemical composition, and specific surface area of NPs were evaluated using X-ray diffraction, transmission electron microscopy, scanning electron microscopy, energy-dispersive X-ray spectroscopy, X-ray photoelectron spectroscopy, and Brunauer–Emmett–Teller analysis. From gas-sensing data, the H2S responses of SnO2 NPs were greatly enhanced by CuO loading particularly at the optimal Cu content of 20 wt%. The 20 wt% CuO/SnO2 sensor showed an excellent response of 1.36 × 105 toward 10 ppm H2S and high H2S selectivity against H2, SO2, CH4, and C2H2 at a low optimum working temperature of 200 °C. In addition, the sensor provided fast response and a low detection limit of less than 0.15 ppm. The CuO–SnO2 sensor could therefore be a potential candidate for H2S detection in environmental applications.

scholarly journals Zirconia Nanotube Coatings - UV-Resistant Superhydrophobic Surfaces

2021 ◽  
Author(s):  
Swathi Naidu Vakamulla Raghu ◽  
Manuela S Killian ◽  
Khajidkhand Chuluunbandi
Keyword(s):  
Photoelectron Spectroscopy ◽  
Mechanical Stability ◽  
Single Step ◽  
Superhydrophobic Surfaces ◽  
Electrochemical Anodization ◽  
Oxide Surfaces ◽  
Metal Oxide Surfaces ◽  
Superhydrophobic Coatings ◽  
Assembled Monolayers ◽  
Nanostructured Oxide

Surface modifications influence material interactions such as wettability, imparting hydrophobicity or hydrophilicity. Mainstream research focused on enhancing product shelf-life, directs attention towards superhydrophobic surfaces (SHS). SHS offer several benefits for outdoor applications such as self-cleaning, anti-soiling, anti-mist etc. In this manuscript, we explore the possibility of combining structural and chemical modifications to metal substrates in order to create superhydrophobic metal oxide surfaces. ZrO2-nanotubes are evaluated with regard to their application as transparent UV-stable superhydrophobic coatings. Nanostructured oxide surfaces are created via single-step electrochemical anodization. The absence of HF acid-based pre-etching steps offer a safe and alternatively a green synthesis route. Anodized oxides are modified using octadecylphosphonic acid self-assembled monolayers, demonstrate superhydrophobicity and are evaluated for their mechanical stability under a jet of water, chemical stability under indirect sunlight irradiation in air/water and direct UV exposure. Zirconia nanotubular films were evaluated for optical transparency using light microscopy and surface wettability of the different zirconia-composites was compared to the model system-titania. Structural and compositional differences of the SAM layer upon time dependent decay were analyzed with X-ray photoelectron spectroscopy. <br>

scholarly journals A Room-Temperature CNT/Fe3O4 Based Passive Wireless Gas Sensor

Sensors ◽  
2018 ◽  
Vol 18 (10) ◽  
pp. 3542 ◽  
Author(s):  
Tao Guo ◽  
Tianhao Zhou ◽  
Qiulin Tan ◽  
Qianqian Guo ◽  
Fengxiang Lu ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Gas Sensor ◽  
Room Temperature ◽  
Gas Sensing ◽  
Low Cost ◽  
Fast Response ◽  
Sensing Material ◽  
Recovery Times ◽  
Response And Recovery ◽  
Good Repeatability

A carbon nanotube/Fe3O4 thin film-based wireless passive gas sensor with better performance is proposed. The sensitive test mechanism of LC (Inductance and capacitance resonant) wireless sensors is analyzed and the reason for choosing Fe3O4 as a gas sensing material is explained. The design and fabrication process of the sensor and the testing method are introduced. Experimental results reveal that the proposed carbon nanotube (CNT)/Fe3O4 based sensor performs well on sensing ammonia (NH3) at room temperature. The sensor exhibits not only an excellent response, good selectivity, and fast response and recovery times at room temperature, but is also characterized by good repeatability and low cost. The results for the wireless gas sensor’s performance for different NH3 gas concentrations are presented. The developed device is promising for the establishment of wireless gas sensors in harsh environments.

scholarly journals Synthesis of a Novel In2O3-InN Bottle Nanotube Using In-Situ Partial Oxidation with Enhanced Gas Sensing Platform to Detect NO2

Crystals ◽  
2020 ◽  
Vol 10 (7) ◽  
pp. 570
Author(s):  
Qiuyang Ning ◽  
Guoguang Wu ◽  
Yihui Wang ◽  
Yuanbo Sun ◽  
Wei Feng
Keyword(s):  
Electron Microscopy ◽  
Partial Oxidation ◽  
Photoelectron Spectroscopy ◽  
Gas Sensing ◽  
Fast Response ◽  
High Concentration ◽  
X Ray ◽  
Sensing Platform ◽  
Lower Temperature

A brand-new gas sensor nanocomposite, In2O3-InN, was synthesized by in-situ partial oxidation of InN and presented fast response–recovery property for NO2 detecting. The structure and morphology of the samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS) and energy-dispersive X-ray detection (EDX) analysis. The results show that the final In2O3-InN composites were composed of hexagonal type In2O3 and hexagonal type InN, which exhibited bottle nanotube structure on the relative macroscopic level. Microscopically, at the interface of In2O3 and InN, n–n hetero junction formed. Works form gas sensing property found that it is obviously that In2O3-InN got a quite stronger response, 1021, at relatively lower temperature, 100 °C, comparing to pure In2O3, 279.1 at 150 °C. After doping, the gas-sensing performance was improved. By analyzing the concentration of oxygen vacation and n–n hetero junctions mechanism, it was verified that the superiority of gas sensing properties of the In2O3-InN can be attributed to the high concentration of oxygen vacancies and the formation of n–n hetero junctions.

Highly Flexible and Transparent Single Wall Carbon Nanotube Network Gas Sensors Fabricated on PDMS Substrates

2006 ◽  
Vol 922 ◽  
Author(s):  
Chi-Won Cho ◽  
Chae-Hyun Lim ◽  
Chang-Seung Woo ◽  
Hyung-Suk Jeon ◽  
Bonghyun Park ◽  
...  
Keyword(s):  
Thin Films ◽  
Carbon Nanotube ◽  
Bias Voltage ◽  
Mechanical Stability ◽  
Gas Sensing ◽  
Dimethyl Siloxane ◽  
Carbon Nanotube Network ◽  
Recovery Times ◽  
Basic Characteristics ◽  
Transfer Method

AbstractWe report on the basic characteristics and gas sensing operation of density controlled single-walled carbon nanotube (SWCNT) thin films on poly(dimethyl siloxane) (PDMS) substrates The vacuum filteration and PDMS mold transfer method allowed the density of SWCNT distributed to have non-local uniformity. The optical transparency of the SWCNT thin films was inversely proportional to SWCNT density and conductivity. The flexible SWCNT thin film showed high mechanical stability with negligible change in conductance after being bent by 180o. We evaluated its gas sensing operation depending on SWCNT density and bias voltage. It was shown that lower SWCNT density thin films had higher sensitivity to NH3 gas, which may be due to higher exposed surface area for lower density SWCNT thin films. Also, we found that lower bias voltage devices showed faster recovery times. The results show that vacuum filteration and mold transfer method produced flexible SWCNT thin films that have stable mechanical and electrical characteristics and also stable gas sensing capabilities making them applicable to future flexible integrated sensors.

Sign in / Sign up

Export Citation Format

Share Document