scholarly journals Effects of Channel Thickness on Electrical Performance and Stability of High-Performance InSnO Thin-Film Transistors

Membranes ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 929
Author(s):  
Qi Li ◽  
Junchen Dong ◽  
Dedong Han ◽  
Yi Wang

InSnO (ITO) thin-film transistors (TFTs) attract much attention in fields of displays and low-cost integrated circuits (IC). In the present work, we demonstrate the high-performance, robust ITO TFTs that fabricated at process temperature no higher than 100 °C. The influences of channel thickness (tITO, respectively, 6, 9, 12, and 15 nm) on device performance and positive bias stress (PBS) stability of the ITO TFTs are examined. We found that content of oxygen defects positively correlates with tITO, leading to increases of both trap states as well as carrier concentration and synthetically determining electrical properties of the ITO TFTs. Interestingly, the ITO TFTs with a tITO of 9 nm exhibit the best performance and PBS stability, and typical electrical properties include a field-effect mobility (µFE) of 37.69 cm2/Vs, a Von of −2.3 V, a SS of 167.49 mV/decade, and an on–off current ratio over 107. This work paves the way for practical application of the ITO TFTs.

2019 ◽  
Vol 9 (4) ◽  
pp. 773 ◽  
Author(s):  
Lirong Zhang ◽  
Wenping Xiao ◽  
Weijing Wu ◽  
Baiquan Liu

Oxide semiconductors have drawn much attention in recent years due to their outstanding electrical performance, such as relatively high carrier mobility, good uniformity, low process temperature, optical transparency, low cost and especially flexibility. Flexible oxide-based thin film transistors (TFTs) are one of the hottest research topics for next-generation displays, radiofrequency identification (RFID) tags, sensors, and integrated circuits in the wearable field. The carrier transport mechanism of oxide semiconductor materials and typical device configurations of TFTs are firstly described in this invited review. Then, we describe the research progress on flexible oxide-based TFTs, including representative TFTs fabricated on different kinds of flexible substrates, the mechanical stress effect on TFTs and optimized methods to reduce this effect. Finally, an outlook for the future development of oxide-based TFTs is given.


Nanomaterials ◽  
2020 ◽  
Vol 10 (5) ◽  
pp. 965
Author(s):  
Yanwei Li ◽  
Chun Zhao ◽  
Deliang Zhu ◽  
Peijiang Cao ◽  
Shun Han ◽  
...  

Thin-film transistors (TFTs) made of metal oxide semiconductors are now increasingly used in flat-panel displays. Metal oxides are mainly fabricated via vacuum-based technologies, but solution approaches are of great interest due to the advantages of low-cost and high-throughput manufacturing. Unfortunately, solution-processed oxide TFTs suffer from relatively poor electrical performance, hindering further development. Recent studies suggest that this issue could be solved by introducing a novel heterojunction strategy. This article reviews the recent advances in solution-processed heterojunction oxide TFTs, with a specific focus on the latest developments over the past five years. Two of the most prominent advantages of heterostructure oxide TFTs are discussed, namely electrical-property modulation and mobility enhancement by forming 2D electron gas. It is expected that this review will manifest the strong potential of solution-based heterojunction oxide TFTs towards high performance and large-scale electronics.


2021 ◽  
Vol 16 (2) ◽  
pp. 1-11
Author(s):  
José Enrique Eirez Izquierdo ◽  
José Diogo da Silva Oliveira ◽  
Vinicius Augusto Machado Nogueira ◽  
Dennis Cabrera García ◽  
Marco Roberto Cavallari ◽  
...  

This work is focused on the bias stress (BS) effects in Organic Thin-Film Transistors (OTFTs) from poly(2,5-bis(3-alkylthiophen-2-yl)thieno[3,2-b]thiophene) (PBTTT-C14) on both highly-doped Si and glass substrates. While the former had a thermally-grown SiO2 dielectric, the latter demanded an alternative dielectric that should be capable to withstand bottom contact lithography, as well as semiconducting thin-film deposition. In addition, it should represent one more step towards flexible electronics. In order to do that, poly(4-vinylphenol) (PVP) was blended to poly(melamine-co-formaldehyde) methylated (PMF). OTFTs on glass with a cross-linked polymer dielectric had a charge carrier mobility (μ) of 4.0x10-4 cm2/Vs, threshold voltage (VT) of 18 V, current modulation (ION/OFF) higher than 1x102, and subthreshold slope (SS) of -7.7 V/dec. A negative BS shifted VT towards negative values and produced an increase in ION/OFF. A positive BS, on the other hand, produced the opposite effect only for OTFTs on Si. This is believed to be due to a higher trapping at the PVP:PMF interface with PBTTT-C14. Modeling the device current along time by a stretched exponential provided shorter time constants of ca. 105 s and higher exponents of 0.7–0.9 for devices on glass. Due to the presence of increased BS effects, the application of organic TFTs based on PVP:PMF as flexible sensors will require compensating circuits, lower voltages or less measurements in time. Alternatively, BS effects could be reduced by a dielectric surface treatment.


2016 ◽  
Vol 4 (20) ◽  
pp. 4478-4484 ◽  
Author(s):  
Ao Liu ◽  
Guoxia Liu ◽  
Huihui Zhu ◽  
Byoungchul Shin ◽  
Elvira Fortunato ◽  
...  

Eco-friendly IWO thin films are fabricated via a low-cost solution process and employed as channel layers in thin-film transistors.


2013 ◽  
Vol 44 (1) ◽  
pp. 1014-1017 ◽  
Author(s):  
Tokiyoshi Matsuda ◽  
Mutsumi Kimura ◽  
Jingxin Jiang ◽  
Dapeng Wang ◽  
Mamoru Furuta ◽  
...  

2019 ◽  
Vol 215 ◽  
pp. 111006 ◽  
Author(s):  
Kyoungwan Woo ◽  
Se Hyeong Lee ◽  
Sanghyun Lee ◽  
So-Young Bak ◽  
Yoo-Jong Kim ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document