scholarly journals A Review on Inorganic Nanoparticles Modified Composite Membranes for Lithium-Ion Batteries: Recent Progress and Prospects

Membranes ◽  
2019 ◽  
Vol 9 (7) ◽  
pp. 78 ◽  
Author(s):  
Muhammad Rehman Asghar ◽  
Muhammad Tuoqeer Anwar ◽  
Ahmad Naveed ◽  
Junliang Zhang
Keyword(s):  
Lithium Ion Battery ◽  
Mechanical Stability ◽  
Lithium Ion ◽  
Composite Membranes ◽  
Inorganic Nanoparticles ◽  
High Porosity ◽  
Excellent Thermal Stability ◽  
Inorganic Particles ◽  
Inorganic Particle ◽  
Electrolyte Uptake

Separators with high porosity, mechanical robustness, high ion conductivity, thin structure, excellent thermal stability, high electrolyte uptake and high retention capacity is today’s burning research topic. These characteristics are not easily achieved by using single polymer separators. Inorganic nanoparticle use is one of the efforts to achieve these attributes and it has taken its place in recent research. The inorganic nanoparticles not only improve the physical characteristics of the separator but also keep it from dendrite problems, which enhance its shelf life. In this article, use of inorganic particles for lithium-ion battery membrane modification is discussed in detail and composite membranes with three main types including inorganic particle-coated composite membranes, inorganic particle-filled composite membranes and inorganic particle-filled non-woven mates are described. The possible advantages of inorganic particles application on membrane morphology, different techniques and modification methods for improving particle performance in the composite membrane, future prospects and better applications of ceramic nanoparticles and improvements in these composite membranes are also highlighted. In short, the contents of this review provide a fruitful source for further study and the development of new lithium-ion battery membranes with improved mechanical stability, chemical inertness and better electrochemical properties.

A high-strength PPESK/PVDF fibrous membrane prepared by coaxial electrospinning for lithium-ion battery separator

2018 ◽  
Vol 31 (8) ◽  
pp. 948-958 ◽  
Author(s):  
Wenzheng Gong ◽  
Xinyu Wang ◽  
Zheng Li ◽  
Junfeng Gu ◽  
Shilun Ruan ◽  
...  
Keyword(s):  
Lithium Ion Battery ◽  
Lithium Ion ◽  
Fibrous Membrane ◽  
Coaxial Electrospinning ◽  
Mechanical And Thermal Properties ◽  
High Porosity ◽  
Hot Press ◽  
Excellent Thermal Stability ◽  
Pvdf Membrane ◽  
Electrolyte Uptake

Electrospinning fibrous membranes have attracted a great deal of attention because of their advantages, including uniform pore size, large ratio surface area, and high porosity. For extended application in lithium-ion battery, it is essential to further improve their electrochemical, mechanical, and thermal properties. In this work, a new poly (phthalazine ether sulfone ketone) (PPESK)/polyvinyli-denefluoride (PVDF) core/shell fibrous membrane was fabricated via the coaxial electrospinning technique, followed by hot press. The PPESK/PVDF membrane hot pressed at 160°C exhibits excellent comprehensive performance, including large porosity (80%), high electrolyte uptake (805%), and excellent thermal stability (at 200°C). Moreover, due to the improved bonding effect derived from the solidification of the PVDF shell layer after the hot press, the mechanical property of the membrane is effectively enhanced. The electrochemical tests also indicate that the PPESK/PVDF membrane shows larger ionic conductivity and lower interfacial resistance when compared with commercial microporous polypropylene separator. In addition, simulated cells assembled with the PPESK/PVDF membrane present superior discharge capacity, stable cycle performance, and excellent rate capability. Therefore, the hot-pressed coaxial PPESK/PVDF fibrous membrane has the potential to be a promising candidate as the separator for high-performance lithium-ion battery.

Recent advances in composite membranes modified with inorganic nanoparticles for high-performance lithium ion batteries

RSC Advances ◽  
2016 ◽  
Vol 6 (13) ◽  
pp. 10250-10265 ◽  
Author(s):  
Qiaohuan Cheng ◽  
Wen He ◽  
Xudong Zhang ◽  
Mei Li ◽  
Xin Song
Keyword(s):  
Lithium Ion Batteries ◽  
High Performance ◽  
Lithium Ion ◽  
Composite Membranes ◽  
Inorganic Nanoparticles ◽  
Inorganic Particles ◽  
Recent Advances

Various composite membranes with inorganic particles for lithium ion batteries are summarized and discussed.

PEI-SiO2 composite membranes with high thermal stability: Synthesis by self-assembled in situ growth and application in lithium-ion batteries

2020 ◽  
pp. 095400832096455
Author(s):  
Wei Song ◽  
Weiwei Cui ◽  
Xu Wang ◽  
Zeyu Lin ◽  
Wei Deng ◽  
...  
Keyword(s):  
Thermal Stability ◽  
Lithium Ion Batteries ◽  
Composite Membrane ◽  
Retention Rate ◽  
Lithium Ion ◽  
Composite Membranes ◽  
High Porosity ◽  
Electrolyte Uptake ◽  
Electrochemical Window

To improve the safety of lithium-ion batteries (LIBs), a polyether amide–silica (PEI-SiO2) composite membrane was developed by the in situ hydrolysis of tetraethylorthosilicate (TEOS) and its subsequent self-assembly on the surface of PEI fibers. Because of the presence of the SiO2 shell, the PEI-SiO2 composite membrane exhibited good thermal stability at high temperatures. The composite membrane did not change its color and size after heating at 200°C for 1 h as well as exhibited excellent flame retardancy. Moreover, the membrane maintained its high porosity even after the introduction of shell layers. The electrolyte is completely absorbed in the membrane within 0.5 s. The electrolyte uptake was up to 625%, and the ionic conductivity was up to 1.9 mS/cm at room temperature. Compared to the polyolefin membrane and the pure PEI membrane, the PEI-SiO2 composite membrane showed higher electrochemical stability, with an electrochemical window of up to 5.5 V. The battery assembled with the composite membrane showed excellent cycle stability, and the capacity retention rate was as high as 98.6% after 50 cycles. The LIBs based on the PEI-SiO2 composite membrane exhibited safe operation and high electrochemical performance, thus highlighting the applicability of the composite membrane in high-power batteries.

Fabrication of hybrid gel nanofibrous polymer electrolyte for lithium ion battery

2018 ◽  
Vol 32 (19) ◽  
pp. 1840066 ◽  
Author(s):  
Monali V. Bhute ◽  
Subhash B. Kondawar ◽  
Pankaj Koinkar
Keyword(s):  
Lithium Ion Battery ◽  
Polymer Electrolyte ◽  
Ethylene Carbonate ◽  
Gel Polymer Electrolyte ◽  
Rate Capability ◽  
Lithium Ion ◽  
Cycle Performance ◽  
High Porosity ◽  
Hybrid Gel ◽  
Electrolyte Uptake

Fibrous membranes are promising separators for high-performance lithium ion battery because of their high porosity and superior electrolyte uptake. In this paper, the fabrication of hybrid gel polymer electrolyte (HGPE) by introducing SnO2 nanoparticles in poly(vinylidine fluoride) by electrospinning technique and soaking the electrospun nanofibrous membranes in 1 M LiPF6 in ethylene carbonate (EC)/diethyl carbonate (DEC) (1:1, v/v). The as-prepared electrospun HGPE with SnO2 nanofiller was characterized by scanning electron microscopy. The influence of SnO2 on the structure of polymer membrane, physical, and electrochemical properties is systematically investigated. HGPE shows significant high ionic conductivity 4.6 × 10[Formula: see text] S/cm at room-temperature and better cell performance such as discharge C-rate capability and cycle performance. The hybrid gel polymer nanofibrous membrane favors high uptake of lithium electrolyte so that electrolyte leakage is reduced. The gel polymer electrolyte with SnO2 filler was used for the fabrication of Li/PVdF-SnO2/LiFePO4 coin cell. The fabricated cell was evaluated at a current density of 0.2 C-rate and delivered stable and excellent cycle performance. This study revealed that the prepared HGPE can be employed as potential electrolyte for lithium ion batteries.

Electrospun PVDF/PMMA/SiO2 Membrane Separators for Rechargeable Lithium-Ion Batteries

2015 ◽  
Vol 645-646 ◽  
pp. 1201-1206 ◽  
Author(s):  
Xiao Lin Wu ◽  
Jie Lin ◽  
Jian Yan Wang ◽  
Hang Guo
Keyword(s):  
Vinylidene Fluoride ◽  
Lithium Ion ◽  
Electrospun Nanofibers ◽  
Solidification Process ◽  
High Porosity ◽  
Nanofiber Membrane ◽  
Discharge Performance ◽  
Inorganic Particles ◽  
Electrolyte Uptake ◽  
Nanofiber Membranes

In this paper composite nanofiber membranes were prepared by electrospinning technology from poly (vinylidene fluoride) (PVDF)-poly (methyl methacrylate) (PMMA)-SiO2blend solutions with different PMMA and SiO2contents. It was found that the diameter of electrospun nanofibers was greatly increased with the added PMMA content but decreased with the added SiO2content, and when both PMMA and SiO2were added the diameter of electrospun nanofibers was decreased. With a proper ratio of the PMMA and SiO2added, the electrospum nanofiber membrane could have a suitable diameter with high porosity. The XRD results revealed that electrospun nanofiber membranes contained mainly β-phase crystal structure of PVDF, and its crystalline is reduced with the added PMMA and SiO2contents due to the inhibited crystallization of the polymer by the inorganic particles and PMMA during the solidification process. These nanofiber membranes exhibited a high electrolyte uptake, around 300%. Moreover, the incorporation of PMMA and SiO2into the nanofiber membrane improved the ionic conductivity from 1.7×10−3S/cm to 2.0×10−3S/cm at room temperature. Compared with commercial film PE, their cell cycle and charge and discharge performance were also greatly improved.

NiCo2O4 bricks as anode materials with high lithium storage property

MRS Advances ◽  
2019 ◽  
Vol 4 (33-34) ◽  
pp. 1861-1868 ◽  
Author(s):  
Hui Wang ◽  
Youning Gong ◽  
Delong Li ◽  
Qiang Fu ◽  
Chunxu Pan
Keyword(s):  
Lithium Ion Battery ◽  
Anode Material ◽  
Current Density ◽  
Large Scale ◽  
Lithium Ion ◽  
Cost Effective ◽  
Reversible Capacity ◽  
High Rate ◽  
High Porosity ◽  
Lithium Storage

ABSTRACTIn this study, a novel brick-like NiCo2O4 material was synthesized via a facile hydrothermal method. The as-prepared NiCo2O4 material possessed high porosity with the BET specific surface area of 58.33 m2/g, and its pore size distribution was in a range of 5-15 nm with a dominant pore diameter of 10.7 nm. The electrochemical performance of the NiCo2O4 was further investigated as anode material for lithium-ion battery. The NiCo2O4 anode possessed a high lithium storage capacity up to 2353.0 mAh/g at the current density of 100 mA/g. Even at the high rate of 1 A/g, a reversible capacity of ∼600 mAh/g was still retained, and an average discharge capacity of ∼1145 mAh/g could be recovered when the current density was reduced back to 150 mA/g. Due to the simple and cost-effective process, the NiCo2O4 bricks anode material shows great potential for further large-scale applications on the area of lithium-ion battery.

scholarly journals Tissue Paper-based Composite Separator Using Nano-SiO2 Hybrid Crosslinked Polymer Electrolyte as Coating Layer For Lithium Ion Battery With Superior Security and Cycle Stability

2021 ◽  
Author(s):  
Xinyu Zeng ◽  
Yu Liu ◽  
Rulei He ◽  
Tongyuan Li ◽  
Yuqin Hu ◽  
...  
Keyword(s):  
Lithium Ion Battery ◽  
Vinylidene Fluoride ◽  
Coating Layer ◽  
Lithium Ion ◽  
Cycle Stability ◽  
Crosslinking Degree ◽  
Tissue Paper ◽  
Electrolyte Uptake ◽  
Electrochemical Window ◽  
Composite Separator

Abstract With the development of energy-storage devices, separator is encountered by several challenges including adequate safety, higher current density and superior stability. Tissue paper, composed of packed cellulose fibers, possesses lower production cost, more easily accessibility, superior wettability and outstanding thermostability, thus being prospective as a substrate of high performance separator. To address structure collapse phenomenon occurred in conventional coating layer after long term electrolyte swelling, nano-SiO2 hybrid crosslinked network was constructed on tissue paper through chemical reactions between polymer poly (vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) and hyperbranched polyethyleneimine (PEI) in this work. The influences of crosslinking degree on physical properties and electrochemical performance were studied thoroughly. It can be found that when the crosslinking ratio of PVDF-HFP and PEI fixed at 10:1, the crosslinked composite separator displays excellent electrolyte uptake and wettability, superior ionic conductivity, better interfacial compatibility as well as higher Li+ transference number (0.56), thus offering battery with prominent rate capabilities. Besides, this crosslinked composite separator exhibits satisfying dimensional stability even treated at 250 oC, better flame retardancy, enhanced mechanical behavior, wider electrochemical window and outstanding cycle stability. Accordingly, tissue paper-based crosslinked composite separator can meet higher requirements put forward by high power lithium ion battery.

scholarly journals Silica/poly(vinylidene fluoride) porous composite membranes for lithium-ion battery separators

2018 ◽  
Vol 564 ◽  
pp. 842-851 ◽  
Author(s):  
C.M. Costa ◽  
M. Kundu ◽  
V.F. Cardoso ◽  
A.V. Machado ◽  
M.M. Silva ◽  
...  
Keyword(s):  
Lithium Ion Battery ◽  
Vinylidene Fluoride ◽  
Lithium Ion ◽  
Composite Membranes ◽  
Porous Composite ◽  
Poly Vinylidene Fluoride

scholarly journals Activated Carbon-Decorated Spherical Silicon Nanocrystal Composites Synchronously-Derived from Rice Husks for Anodic Source of Lithium-Ion Battery

Nanomaterials ◽  
2019 ◽  
Vol 9 (7) ◽  
pp. 1055 ◽  
Author(s):  
Sankar Sekar ◽  
Abu Talha Aqueel Ahmed ◽  
Akbar I. Inamdar ◽  
Youngmin Lee ◽  
Hyunsik Im ◽  
...  
Keyword(s):  
Activated Carbon ◽  
Lithium Ion Battery ◽  
Silicon Nanocrystals ◽  
Specific Capacity ◽  
Reduction Process ◽  
Lithium Ion ◽  
Nanocrystalline Silicon ◽  
Green Energy ◽  
High Porosity ◽  
Rice Husks

The nanocomposites of activated-carbon-decorated silicon nanocrystals (AC<nc-Si>AC) were synchronously derived in a single step from biomass rice husks, through the simple route of the calcination method together with the magnesiothermic reduction process. The final product, AC<nc-Si>AC, exhibited an aggregated structure of activated-carbon-encapsulated nanocrystalline silicon spheres, and reveals a high specific surface area (498.5 m2/g). Owing to the mutualization of advantages from both silicon nanocrystals (i.e., low discharge potential and high specific capacity) and activated carbon (i.e., high porosity and good electrical conductivity), the AC<nc-Si>AC nanocomposites are able to play a substantial role as an anodic source material for the lithium-ion battery (LIB). Namely, a high coulombic efficiency (97.5%), a high discharge capacity (716 mAh/g), and a high reversible specific capacity (429 mAh/g after 100 cycles) were accomplished when using AC<nc-Si>AC as an LIB anode. The results advocate that the simultaneous synthesis of biomass-derived AC<nc-Si>AC is beneficial for green energy-storage device applications.

Sign in / Sign up

Export Citation Format

Share Document