scholarly journals Cooling Behavior and Microstructure of Semisolid A201 Aluminum Alloy Prepared by the SEED Process

Metals ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 922
Author(s):  
Junzhen Gao ◽  
Xiaogang Hu ◽  
Qiang Zhu ◽  
Daquan Li ◽  
Yonglin Kang
Keyword(s):  
High Performance ◽  
High Strength ◽  
Grain Structure ◽  
Semisolid Processing ◽  
Radial Temperature Gradient ◽  
Pouring Temperature ◽  
Slow Cooling ◽  
Radial Temperature ◽  
High Solid Fraction ◽  
Cooling Behavior

The biggest challenge in semisolid processing of high-performance aluminum alloys is the narrow temperature processing windows of these alloys, and as a result, the preparation of qualified semisolid slurries is very important. High solid fraction slurries of high-strength A201 alloy were prepared by the Swirled Enthalpy Equilibration Device (SEED) process. The cooling behavior and microstructures of the A201 slurries produced by the standard, as well as a modified, SEED process were investigated. The results show that qualified A201 slurry can be produced by decreasing the pouring temperature and controlling the processing time in the SEED process. The modified SEED process significantly reduced the radial temperature gradient of the melt, due to the slow cooling rates involved, with the resulting slurries being more uniform, with more spherical microstructures, as compared to those produced by the standard SEED process. The formation of the nondendritic grain structure in the SEED process is attributed to the uniformly distributed large number of nuclei within the melt and the slow cooling of the melt in the containing crucible.

High-resolution scanning electron microscopy of thin-film magnetic media of magnetic recording disk

1992 ◽  
Vol 50 (2) ◽  
pp. 1334-1335
Author(s):  
K. Ogura ◽  
H. Nishioka ◽  
N. Ikeo ◽  
T. Kanazawa ◽  
J. Teshima
Keyword(s):  
Thin Film ◽  
Fine Structure ◽  
High Resolution ◽  
Magnetic Recording ◽  
High Performance ◽  
Magnetic Hysteresis ◽  
Grain Structure ◽  
Magnetic Media ◽  
Cross Sectional ◽  
Resolution Observation

Structural appraisal of thin film magnetic media is very important because their magnetic characters such as magnetic hysteresis and recording behaviors are drastically altered by the grain structure of the film. However, in general, the surface of thin film magnetic media of magnetic recording disk which is process completed is protected by several-nm thick sputtered carbon. Therefore, high-resolution observation of a cross-sectional plane of a disk is strongly required to see the fine structure of the thin film magnetic media. Additionally, observation of the top protection film is also very important in this field.Recently, several different process-completed magnetic disks were examined with a UHR-SEM, the JEOL JSM 890, which consisted of a field emission gun and a high-performance immerse lens. The disks were cut into approximately 10-mm squares, the bottom of these pieces were carved into more than half of the total thickness of the disks, and they were bent. There were many cracks on the bent disks. When these disks were observed with the UHR-SEM, it was very difficult to observe the fine structure of thin film magnetic media which appeared on the cracks, because of a very heavy contamination on the observing area.

BERYLCO 25

Alloy Digest ◽  
1973 ◽  
Vol 22 (9) ◽  
Keyword(s):  
Corrosion Resistance ◽  
Physical Properties ◽  
Tensile Properties ◽  
Copper Alloy ◽  
High Performance ◽  
High Strength ◽  
Heat Treating ◽  
Beryllium Copper

Abstract BERYLCO 25 is the standard high-performance beryllium copper alloy most widely used because of its high strength, hardness and excellent spring characteristics. BERYLCO 25 is the updated version of BERYLCO 25S (Alloy Digest Cu-3, November 1952). This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Cu-271. Producer or source: Kawecki Berylco Industries Inc..

ARMCO PH 13-8Mo

Alloy Digest ◽  
1990 ◽  
Vol 39 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Corrosion Resistance ◽  
High Temperature ◽  
Physical Properties ◽  
Stress Corrosion ◽  
Tensile Properties ◽  
High Performance ◽  
High Strength ◽  
Heat Treating ◽  
Temperature Performance

Abstract ARMCO PH 13-8Mo is designed for high-performance applications requiring high strength coupled with excellent resistance to corrosion and stress corrosion. It has excellent toughness, good transverse properties and excellent forgeability. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties as well as fracture toughness. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: SS-224. Producer or source: Baltimore Specialty Steels Corporation. Originally published May 1969, revised February 1990.

STRENX 100

Alloy Digest ◽  
2019 ◽  
Vol 68 (2) ◽  
Keyword(s):  
Yield Strength ◽  
Physical Properties ◽  
Structural Steel ◽  
Tensile Properties ◽  
High Performance ◽  
High Strength ◽  
Minimum Yield

Abstract Strenx 100 is a high-strength, high-performance structural steel with a minimum yield strength of 690 MPa (100 ksi). It meets the requirements of ASTM A514 Grade S. Strenx 100 is a US Customary steel similar to Strenx 700 (Alloy Digest SA-779, February 2017). This datasheet provides information on composition, physical properties, and tensile properties. Filing Code: SA-838. Producer or source: SSAB Swedish Steel Inc..

OUTOKUMPU TYPE 630

Alloy Digest ◽  
2016 ◽  
Vol 65 (2) ◽  
Keyword(s):  
Fracture Toughness ◽  
Stainless Steel ◽  
Corrosion Resistance ◽  
Physical Properties ◽  
High Performance ◽  
High Strength ◽  
Heat Treating ◽  
304 Stainless Steel ◽  
Type 304 ◽  
Type 304 Stainless Steel

Abstract Outokumpu Type 630 is a martensitic age hardenable alloy of composition 17Cr-4Ni. The alloy has high strength and corrosion resistance similar to that of Type 304 stainless steel. This datasheet provides information on composition, physical properties, hardness, and tensile properties as well as fracture toughness. It also includes information on corrosion resistance as well as forming, heat treating, and joining. Filing Code: SS-1238. Producer or source: Outokumpu High Performance Stainless.

FORMALOY

Alloy Digest ◽  
1975 ◽  
Vol 24 (1) ◽  
Keyword(s):  
Fracture Toughness ◽  
Compressive Strength ◽  
Corrosion Resistance ◽  
Sheet Metal ◽  
High Purity ◽  
Base Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Grain Structure ◽  
Excellent Performance

Abstract FORMALOY is a high-strength, high-purity zinc-base alloy with excellent performance in dies for forming sheet metal. It has a fine, dense grain structure which contributes markedly to its good toughness, excellent machinability and ability to develop a high polish. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and compressive strength as well as fracture toughness. It also includes information on corrosion resistance as well as casting, forming, heat treating, machining, and joining. Filing Code: Zn-17. Producer or source: Federated Metals Corporation, ASARCO Inc..

Bestimmung der Dauerhaftigkeit von Hochleistungsbeton mit Hilfe des CDF-Tests / Determination of the durability of high performance concrete by means of CDF-test

1999 ◽  
Vol 5 (1) ◽  
pp. 29-40
Author(s):  
R. Krumbach ◽  
U. Schmelter ◽  
K. Seyfarth
Keyword(s):  
Frost Resistance ◽  
High Strength Concrete ◽  
High Performance ◽  
High Performance Concrete ◽  
High Strength ◽  
Strength Concrete ◽  
Factors Influencing

Abstract Variable obsen>ations concerning frost resistance of high performance concrete have been made. The question arises which are the decisive factors influencing durability under the action of frost and de-icing salt. The proposed experiments are to be carried out in cooperation with F.A.- Finger - Institute of Bauhaus University Weimar. The aim of this study is to determine possible change of durability of high strength concrete, and to investigate the origin thereof. Measures to reduce the risk of reduced durability have to be found.

scholarly journals Study on strong spinning preparation method and mechanism of the industrial pure titanium ultrafine crystallization

2019 ◽  
Vol 14 ◽  
pp. 155892501989525
Author(s):  
Yu Yang ◽  
Yanyan Jia
Keyword(s):  
Heat Treatment ◽  
High Performance ◽  
Pure Titanium ◽  
Grain Structure ◽  
Theoretical Research ◽  
Ultrafine Grain ◽  
Forming Process ◽  
Spinning Process ◽  
And Performance ◽  
Material Utilization

Ultrafine crystallization of industrial pure titanium allowed for higher tensile strength, corrosion resistance, and thermal stability and is therefore widely used in medical instrumentation, aerospace, and passenger vehicle manufacturing. However, the ultrafine crystallizing batch preparation of tubular industrial pure titanium is limited by the development of the spinning process and has remained at the theoretical research stage. In this article, the tubular TA2 industrial pure titanium was taken as the research object, and the ultrafine crystal forming process based on “5-pass strong spin-heat treatment-3 pass-spreading-heat treatment” was proposed. Based on the spinning process test, the ultimate thinning rate of the method is explored and the evolution of the surface microstructure was analyzed by metallographic microscope. The research suggests that the multi-pass, medium–small, and thinning amount of spinning causes the grain structure to be elongated in the axial and tangential directions, and then refined, and the axial fiber uniformity is improved. The research results have certain scientific significance for reducing the consumption of high-performance metals improving material utilization and performance, which also promote the development of ultrafine-grain metals’ preparation technology.

scholarly journals Hugoniot Data and Equation of State Parameters for an Ultra-High Performance Concrete

2021 ◽  
Author(s):  
C. Sauer ◽  
F. Bagusat ◽  
M.-L. Ruiz-Ripoll ◽  
C. Roller ◽  
M. Sauer ◽  
...  
Keyword(s):  
Equation Of State ◽  
High Performance ◽  
High Performance Concrete ◽  
Applied Pressure ◽  
High Strength ◽  
Parameter Study ◽  
Ultra High Performance Concrete ◽  
Data Set ◽  
Shock Response ◽  
Particle Velocities

AbstractThis work aims at the characterization of a modern concrete material. For this purpose, we perform two experimental series of inverse planar plate impact (PPI) tests with the ultra-high performance concrete B4Q, using two different witness plate materials. Hugoniot data in the range of particle velocities from 180 to 840 m/s and stresses from 1.1 to 7.5 GPa is derived from both series. Within the experimental accuracy, they can be seen as one consistent data set. Moreover, we conduct corresponding numerical simulations and find a reasonably good agreement between simulated and experimentally obtained curves. From the simulated curves, we derive numerical Hugoniot results that serve as a homogenized, mean shock response of B4Q and add further consistency to the data set. Additionally, the comparison of simulated and experimentally determined results allows us to identify experimental outliers. Furthermore, we perform a parameter study which shows that a significant influence of the applied pressure dependent strength model on the derived equation of state (EOS) parameters is unlikely. In order to compare the current results to our own partially reevaluated previous work and selected recent results from literature, we use simulations to numerically extrapolate the Hugoniot results. Considering their inhomogeneous nature, a consistent picture emerges for the shock response of the discussed concrete and high-strength mortar materials. Hugoniot results from this and earlier work are presented for further comparisons. In addition, a full parameter set for B4Q, including validated EOS parameters, is provided for the application in simulations of impact and blast scenarios.

scholarly journals Abrasion Resistance of Ultra-High-Performance Concrete for Railway Sleepers

2021 ◽  
Author(s):  
Ariful Hasnat ◽  
Nader Ghafoori
Keyword(s):  
Prestressed Concrete ◽  
Abrasion Resistance ◽  
High Performance ◽  
High Performance Concrete ◽  
High Strength ◽  
Positive Influence ◽  
Cementitious Material ◽  
Partial Replacement ◽  
Fine Aggregate ◽  
Ultra High Performance Concrete

AbstractThis study aimed to determine the abrasion resistance of ultra-high-performance concretes (UHPCs) for railway sleepers. Test samples were made with different cementitious material combinations and varying steel fiber contents and shapes, using conventional fine aggregate. A total of 25 UHPCs and two high-strength concretes (HSCs) were selected to evaluate their depth of wear and bulk properties. The results of the coefficient of variation (CV), relative gain in abrasion, and abrasion index of the studied UHPCs were also obtained and discussed. Furthermore, a comparison was made on the resistance to wear of the selected UHPCs with those of the HSCs typically used for prestressed concrete sleepers. The outcomes of this study revealed that UHPCs displayed excellent resistance against abrasion, well above that of HSCs. Amongst the utilized cementitious material combinations, UHPCs made with silica fume as a partial replacement of cement performed best against abrasion, whereas mixtures containing fly ash showed the highest depth of wear. The addition of steel fibers had a more positive influence on the abrasion resistance than it did on compressive strength of the studied UHPCs.

Sign in / Sign up

Export Citation Format

Share Document