semisolid processing
Recently Published Documents


TOTAL DOCUMENTS

69
(FIVE YEARS 8)

H-INDEX

15
(FIVE YEARS 1)

2022 ◽  
Vol 327 ◽  
pp. 244-249
Author(s):  
Gabriela Lujan Brollo ◽  
Eugênio José Zoqui

Identification of critical temperatures is paramount for semisolid processing. Application of the principles of differential calculus to identify these temperatures on semisolid transformation curves allows the semisolid metal (SSM) processing window to be determined. This paper synthesizes and organizes a methodology that can be used to this end, namely the differentiation method (DM). Examples are given of the application of the method to 356, 355, and 319 aluminum alloys, which are commonly used in SSM processing, and the results are compared with those of numerical simulations performed with Thermo-Calc® (under the Scheil condition). The DM is applied to experimental differential scanning calorimetry (DSC) heat-flow data for cooling and heating cycles under different kinetic conditions (5, 10, 15, 20, and 25 °C/min). The findings indicate that the DM is an efficient tool for identifying critical points such as the solidus, liquidus, and knee as well as tertiary transformations. The results obtained using the method agree well with those obtained using traditional techniques. The method is operator-independent as it uses well-defined mathematical/graphical criteria to identify critical points. Furthermore, the DM identifies an SSM processing window defined in terms of a higher and lower temperature for rheocasting or thixoforming operations (TSSML and TSSMH) between which the sensitivity is less than 0.03 °C-1 and, consequently, the process is highly controllable. This DM has already been published in a partial and dispersed way in different works in the past and the aim here is to present it in a more cohesive and didactic way, synthesizing the presented data and comparing them.


Metals ◽  
2020 ◽  
Vol 10 (10) ◽  
pp. 1368
Author(s):  
Anders E. W. Jarfors

Semisolid casting of aluminium alloys is growing. For magnesium alloys, Thixomoulding became the dominant process around the world. For aluminium processing, the situation is different as semisolid processing of aluminium is more technically challenging than for magnesium. Today three processes are leading the process implementation, The Gas-Induced Superheated-Slurry (GISS) method, the RheoMetal process and the Swirling Enthalpy Equilibration Device (SEED) process. These processes have all strengths and weaknesses and will fit a particular range of applications. The current paper aims at looking at the strengths and weaknesses of the processes to identify product types and niche applications for each process based on current applications and development directions taken for these processes.


Metals ◽  
2019 ◽  
Vol 9 (9) ◽  
pp. 922
Author(s):  
Junzhen Gao ◽  
Xiaogang Hu ◽  
Qiang Zhu ◽  
Daquan Li ◽  
Yonglin Kang

The biggest challenge in semisolid processing of high-performance aluminum alloys is the narrow temperature processing windows of these alloys, and as a result, the preparation of qualified semisolid slurries is very important. High solid fraction slurries of high-strength A201 alloy were prepared by the Swirled Enthalpy Equilibration Device (SEED) process. The cooling behavior and microstructures of the A201 slurries produced by the standard, as well as a modified, SEED process were investigated. The results show that qualified A201 slurry can be produced by decreasing the pouring temperature and controlling the processing time in the SEED process. The modified SEED process significantly reduced the radial temperature gradient of the melt, due to the slow cooling rates involved, with the resulting slurries being more uniform, with more spherical microstructures, as compared to those produced by the standard SEED process. The formation of the nondendritic grain structure in the SEED process is attributed to the uniformly distributed large number of nuclei within the melt and the slow cooling of the melt in the containing crucible.


2019 ◽  
Vol 6 (8) ◽  
pp. 0865i2
Author(s):  
Saziana Samat ◽  
Mohd Zaidi Omar ◽  
Intan Fadhlina Mohamed

2019 ◽  
Vol 285 ◽  
pp. 176-182
Author(s):  
Hamid Tavakkoli ◽  
Behzad Niroumand ◽  
Ahmad Rezaeian

Effects of SIMA processing on size and shape of primary solid particles of Cu34wt.%Zn2wt.%Pb brass alloy was investigated. The optimal temperature for semisolid processing of the alloy was found to be around 890 °C using Thermo-calc simulation software. Liquid fraction sensitivity of the alloy around this temperature is 0.012. The results indicated the formation of non-dendritic microstructure even after 1 min holding of 10% cold worked sample at 890 °C. Sphericity of the primary solid particles increased by increasing the cold working ratio and holding time. The smallest size (103 μm) and highest shape factor (0.84) of the primary solid particles were achieved at 30% cold working ratio and 5 min holding time.


2019 ◽  
Vol 285 ◽  
pp. 489-494 ◽  
Author(s):  
Frank Czerwinski

An application of semisolid processing to magnesium alloys is described, emphasizing both the fundamental aspects and up-to-date successful industrial applications. The key advantages of the semisolid route are discussed, including longer tool life, tighter dimensional tolerances and better process consistency. The particular attention is paid to reduced temperature of semisolid processing, providing common benefits for magnesium alloys due to their high affinity to oxygen, requiring an expensive protection and leading otherwise to ignition and burning. Major microstructural factors controlling properties of magnesium alloys after semisolid processing are considered. It is concluded that although the reduced temperature results in higher part integrity, it does not create beneficial microstructural characteristics converting to substantially improved mechanical properties.


Metals ◽  
2018 ◽  
Vol 8 (3) ◽  
pp. 148 ◽  
Author(s):  
Jufu Jiang ◽  
Guanfei Xiao ◽  
Ying Wang ◽  
Yingze Liu

2017 ◽  
Vol 27 (7) ◽  
pp. 1483-1497 ◽  
Author(s):  
K.S. ALHAWARI ◽  
M.Z. OMAR ◽  
M.J. GHAZALI ◽  
M.S. SALLEH ◽  
M.N. MOHAMMED

Sign in / Sign up

Export Citation Format

Share Document