scholarly journals Temperature Effects on Optical Trapping Stability

Micromachines ◽  
2021 ◽  
Vol 12 (8) ◽  
pp. 954
Author(s):  
Dasheng Lu ◽  
Francisco Gámez ◽  
Patricia Haro-González
Keyword(s):  
Brownian Motion ◽  
Environmental Conditions ◽  
Temperature Effects ◽  
Room Temperature ◽  
Optical Trapping ◽  
State Of The Art ◽  
Thermal Sensing ◽  
The Stability ◽  
Object Of Study ◽  
Optically Trapped

In recent years, optically trapped luminescent particles have emerged as a reliable probe for contactless thermal sensing because of the dependence of their luminescence on environmental conditions. Although the temperature effect in the optical trapping stability has not always been the object of study, the optical trapping of micro/nanoparticles above room temperature is hindered by disturbances caused by temperature increments of even a few degrees in the Brownian motion that may lead to the release of the particle from the trap. In this report, we summarize recent experimental results on thermal sensing experiments in which micro/nanoparticles are used as probes with the aim of providing the contemporary state of the art about temperature effects in the stability of potential trapping processes.

Methods for the Concentration of Bovine Ac-Globulin (Factor V)

1961 ◽  
Vol 06 (03) ◽  
pp. 435-444 ◽  
Author(s):  
Ricardo H. Landaburu ◽  
Walter H. Seegers
Keyword(s):  
Room Temperature ◽  
Barium Carbonate ◽  
Deae Cellulose ◽  
Reducing Agents ◽  
Factor V ◽  
Isoelectric Precipitation ◽  
Stabilizing Agent ◽  
Bovine Plasma ◽  
The Stability

SummaryAn attempt was made to obtain Ac-globulin from bovine plasma. The concentrates contain mostly protein, and phosphorus is also present. The stability characteristics vary from one preparation to another, but in general there was no loss before 1 month in a deep freeze or before 1 week in an icebox, or before 5 hours at room temperature. Reducing agents destroy the activity rapidly. S-acetylmercaptosuccinic anhydride is an effective stabilizing agent. Greatest stability was at pH 6.0.In the purification bovine plasma is adsorbed with barium carbonate and diluted 6-fold with water. Protein is removed at pH 6.0 and the Ac-globulin is precipitated at pH 5.0. Rivanol and alcohol fractionation is followed by chromatography on Amberlite IRC-50 or DEAE-cellulose. The final product is obtained by isoelectric precipitation.

Tyrosine-Selective Bioconjugation with Iminoxyl Radicals

2020 ◽  
Author(s):  
Katsuya Maruyama ◽  
Takashi Ishiyama ◽  
Yohei Seki ◽  
Kounosuke Oisaki ◽  
Motomu Kanai
Keyword(s):  
Reaction Time ◽  
Steric Hindrance ◽  
Room Temperature ◽  
Water Soluble ◽  
Light Irradiation ◽  
Sodium Ascorbate ◽  
Iminoxyl Radical ◽  
Short Reaction Time ◽  
Modified Peptides ◽  
The Stability

A novel Tyr-selective protein bioconjugation using the water-soluble persistent iminoxyl radical is described. The conjugation proceeded with high Tyr-selectivity and short reaction time under biocompatible conditions (room temperature in buffered media under air). The stability of the conjugates was tunable depending on the steric hindrance of iminoxyl. The presence of sodium ascorbate and/or light irradiation promoted traceless deconjugation, restoring the native Tyr structure. The method is applied to the synthesis of a protein-dye conjugate and further derivatization to azobenzene-modified peptides.

Circular dichroism and infrared study of β-turn formation in repeat peptides of elastin

1987 ◽  
Vol 52 (5) ◽  
pp. 1356-1361
Author(s):  
S. Abdel Rahman ◽  
M. Elsafty ◽  
A. Hattaba
Keyword(s):  
Circular Dichroism ◽  
Solid State ◽  
Ir Spectra ◽  
Chain Length ◽  
Room Temperature ◽  
Infrared Study ◽  
Feature Characteristic ◽  
C 50 ◽  
The Stability ◽  
Circular Dichroïsm

The conformation of elastin-like peptides Boc-Ala-Pro-Gly-Val-APEGM, Boc-Ala-Pro-Gly-Val-Gly-Val-APEGM, Boc-Ala-Pro-Gly-Val-Ala-Pro-Gly-Val-Gly-Val-APEGM, Boc-Ala-Pro-Gly-Val-Gly-Val-Ala-Pro-Gly-Val-Gly-Val-APEGM were examined in solution using circular dichroism at 30 °C, 50 °C, and 70 °C and in solid state by IR at room temperature. The studies show that the β-turn is a significant conformational feature for peptides under investigation in solution at 30 °C and 50 °C, but at 70 °C the tetra, hexa, and decapeptides show the CD feature characteristic of the β-structure while the dodecapeptide spectra show the presence of β-turn which indicates the stability of the β-turn at this chain length. The IR spectra show that in the solid state at room temperature all investigated peptides assume essentially a β-turn except the tetrapeptide which present evidence of antiparallel β-structure. The β-turn contribution in the IR spectra increases with the increase of the chain length of the peptide.

Cholesterol in Serum and Lipoprotein Fractions

1956 ◽  
Vol 2 (3) ◽  
pp. 145-159 ◽  
Author(s):  
Joseph T Anderson ◽  
Ancel Keys
Keyword(s):  
Human Serum ◽  
Total Cholesterol ◽  
Filter Paper ◽  
Room Temperature ◽  
Paper Electrophoresis ◽  
Cholesterol Content ◽  
Intraindividual Variability ◽  
Detailed Data ◽  
The Stability ◽  
Source Of Error

Abstract 1. Methods are described for the separation, by paper electrophoresis and by cold ethanol, of α- and β-lipoproteins in 0.1 ml. of serum, with subsequent analysis of cholesterol in the separated portions. 2. It is shown that both methods of separation yield separated fractions containing substantially the same amounts of cholesterol. 3. Detailed data are given on the errors of measurement for total cholesterol and for cholesterol in the separated lipoprotein fractions. 4. Studies are reported on the stability of cholesterol in stored serum and on paper electrophoresis strips. It is shown that simple drying on filter paper causes no change in cholesterol content and yields a product that is stable for many weeks at ordinary room temperature. 5. The sources of variability in human serum cholesterol values are examined and it is shown that spontaneous intraindividual variability is a much greater source of error than the errors of measurement with these methods.

scholarly journals Review of Multi-Physics Modeling on the Active Magnetic Regenerative Refrigeration

2021 ◽  
Vol 26 (2) ◽  
pp. 47
Author(s):  
Julien Eustache ◽  
Antony Plait ◽  
Frédéric Dubas ◽  
Raynal Glises
Keyword(s):  
Magnetic Field ◽  
Low Temperatures ◽  
Room Temperature ◽  
State Of The Art ◽  
Vapor Compression ◽  
Crucial Step ◽  
Potential Alternative ◽  
Vapor Compression Refrigeration ◽  
Preliminary Study ◽  
Physics Modeling

Compared to conventional vapor-compression refrigeration systems, magnetic refrigeration is a promising and potential alternative technology. The magnetocaloric effect (MCE) is used to produce heat and cold sources through a magnetocaloric material (MCM). The material is submitted to a magnetic field with active magnetic regenerative refrigeration (AMRR) cycles. Initially, this effect was widely used for cryogenic applications to achieve very low temperatures. However, this technology must be improved to replace vapor-compression devices operating around room temperature. Therefore, over the last 30 years, a lot of studies have been done to obtain more efficient devices. Thus, the modeling is a crucial step to perform a preliminary study and optimization. In this paper, after a large introduction on MCE research, a state-of-the-art of multi-physics modeling on the AMRR cycle modeling is made. To end this paper, a suggestion of innovative and advanced modeling solutions to study magnetocaloric regenerator is described.

scholarly journals Quantum-mechanical hydration plays critical role in the stability of firefly oxyluciferin isomers: State-of-the-art calculations of the excited states

2020 ◽  
Vol 153 (20) ◽  
pp. 201103
Author(s):  
Yoshifumi Noguchi ◽  
Miyabi Hiyama ◽  
Motoyuki Shiga ◽  
Hidefumi Akiyama ◽  
Osamu Sugino
Keyword(s):  
Excited States ◽  
State Of The Art ◽  
Critical Role ◽  
Quantum Mechanical ◽  
The Stability

Pressure dependent ultrasonic properties of hcp hafnium metal

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Ramanshu P. Singh ◽  
Shakti Yadav ◽  
Giridhar Mishra ◽  
Devraj Singh
Keyword(s):  
Elastic Constants ◽  
Pressure Range ◽  
Room Temperature ◽  
Ultrasonic Attenuation ◽  
Coupling Constants ◽  
Ultrasonic Properties ◽  
Acoustic Coupling ◽  
Third Order Elastic Constants ◽  
The Stability ◽  
The Given

Abstract The elastic and ultrasonic properties have been evaluated at room temperature between the pressure 0.6 and 10.4 GPa for hexagonal closed packed (hcp) hafnium (Hf) metal. The Lennard-Jones potential model has been used to compute the second and third order elastic constants for Hf. The elastic constants have been utilized to calculate the mechanical constants such as Young’s modulus, bulk modulus, shear modulus, Poisson’s ratio, and Zener anisotropy factor for finding the stability and durability of hcp hafnium metal within the chosen pressure range. The second order elastic constants were also used to compute the ultrasonic velocities along unique axis at different angles for the given pressure range. Further thermophysical properties such as specific heat per unit volume and energy density have been estimated at different pressures. Additionally, ultrasonic Grüneisen parameters and acoustic coupling constants have been found out at room temperature. Finally, the ultrasonic attenuation due to phonon–phonon interaction and thermoelastic mechanisms has been investigated for the chosen hafnium metal. The obtained results have been discussed in correlation with available findings for similar types of hcp metals.

Non-adhesive lotus and other hydrophobic materials

2008 ◽  
Vol 366 (1870) ◽  
pp. 1539-1556 ◽  
Author(s):  
David Quéré ◽  
Mathilde Reyssat
Keyword(s):  
Solid Surface ◽  
Room Temperature ◽  
Water Repellency ◽  
Short Review ◽  
Water Repellent ◽  
Practical Applications ◽  
Hydrophobic Materials ◽  
Volatile Liquid ◽  
Air Cushion ◽  
The Stability

Superhydrophobic materials recently attracted a lot of attention, owing to the potential practical applications of such surfaces—they literally repel water, which hardly sticks to them, bounces off after an impact and slips on them. In this short review, we describe how water repellency arises from the presence of hydrophobic microstructures at the solid surface. A drop deposited on such a substrate can float above the textures, mimicking at room temperature what happens on very hot plates; then, a vapour layer comes between the solid and the volatile liquid, as described long ago by Leidenfrost. We present several examples of superhydrophobic materials (either natural or synthetic), and stress more particularly the stability of the air cushion—the liquid could also penetrate the textures, inducing a very different wetting state, much more sticky, due to the possibility of pinning on the numerous defects. This description allows us to discuss (in quite a preliminary way) the optimal design to be given to a solid surface to make it robustly water repellent.

scholarly journals Separation and Efficient Recovery of Lithium from Spent Lithium-Ion Batteries

Metals ◽  
2021 ◽  
Vol 11 (7) ◽  
pp. 1091
Author(s):  
Eva Gerold ◽  
Stefan Luidold ◽  
Helmut Antrekowitsch
Keyword(s):  
Lithium Ion Batteries ◽  
Electric Vehicles ◽  
Sodium Phosphate ◽  
Room Temperature ◽  
State Of The Art ◽  
Potassium Phosphate ◽  
Lithium Ion ◽  
Rechargeable Batteries ◽  
Raw Material ◽  
Efficient Recovery

The consumption of lithium has increased dramatically in recent years. This can be primarily attributed to its use in lithium-ion batteries for the operation of hybrid and electric vehicles. Due to its specific properties, lithium will also continue to be an indispensable key component for rechargeable batteries in the next decades. An average lithium-ion battery contains 5–7% of lithium. These values indicate that used rechargeable batteries are a high-quality raw material for lithium recovery. Currently, the feasibility and reasonability of the hydrometallurgical recycling of lithium from spent lithium-ion batteries is still a field of research. This work is intended to compare the classic method of the precipitation of lithium from synthetic and real pregnant leaching liquors gained from spent lithium-ion batteries with sodium carbonate (state of the art) with alternative precipitation agents such as sodium phosphate and potassium phosphate. Furthermore, the correlation of the obtained product to the used type of phosphate is comprised. In addition, the influence of the process temperature (room temperature to boiling point), as well as the stoichiometric factor of the precipitant, is investigated in order to finally enable a statement about an efficient process, its parameter and the main dependencies.

scholarly journals Longevity of Raw and Lyophilized Crude Urease Extracts

2021 ◽  
Vol 2 (2) ◽  
pp. 325-334
Author(s):  
Neda Javadi ◽  
Hamed Khodadadi Tirkolaei ◽  
Nasser Hamdan ◽  
Edward Kavazanjian
Keyword(s):  
Crude Extract ◽  
Room Temperature ◽  
Low Cost ◽  
Extraction Process ◽  
Crude Extracts ◽  
Simple Extraction ◽  
Commercial Applications ◽  
Stable Source ◽  
The Stability ◽  
The Cost

The stability (longevity of activity) of three crude urease extracts was evaluated in a laboratory study as part of an effort to reduce the cost of urease for applications that do not require high purity enzyme. A low-cost, stable source of urease will greatly facilitate engineering applications of urease such as biocementation of soil. Inexpensive crude extracts of urease have been shown to be effective at hydrolyzing urea for carbonate precipitation. However, some studies have suggested that the activity of a crude extract may decrease with time, limiting the potential for its mass production for commercial applications. The stability of crude urease extracts shown to be effective for biocementation was studied. The crude extracts were obtained from jack beans via a simple extraction process, stored at room temperature and at 4 ℃, and periodically tested to evaluate their stability. To facilitate storage and transportation of the extracted enzyme, the longevity of the enzyme following freeze drying (lyophilization) to reduce the crude extract to a powder and subsequent re-hydration into an aqueous solution was evaluated. In an attempt to improve the shelf life of the lyophilized extract, dextran and sucrose were added during lyophilization. The stability of purified commercial urease following rehydration was also investigated. Results of the laboratory tests showed that the lyophilized crude extract maintained its activity during storage more effectively than either the crude extract solution or the rehydrated commercial urease. While incorporating 2% dextran (w/v) prior to lyophilization of the crude extract increased the overall enzymatic activity, it did not enhance the stability of the urease during storage.

Sign in / Sign up

Export Citation Format

Share Document