scholarly journals Extraction of Potassium from Feldspar by Roasting with CaCl2 Obtained from the Acidic Leaching of Wollastonite-Calcite Ore

Minerals ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 1369
Author(s):  
Tülay Türk ◽  
Zeynep Üçerler ◽  
Fırat Burat ◽  
Gülay Bulut ◽  
Murat Olgaç Kangal
Keyword(s):  
Hydrochloric Acid ◽  
Froth Flotation ◽  
Glass Production ◽  
Optimal Conditions ◽  
Potassium Salts ◽  
Water Leaching ◽  
Natural Sources ◽  
Agriculture Industry ◽  
The World ◽  
Roasting Temperature

Potassium, which is included in certain contents in the structure of K-feldspar minerals, has a very important function in the growth of plants. Turkey hosts the largest feldspar reserves in the world and is by far the leader in feldspar mining. The production of potassium salts from local natural sources can provide great contributions both socially and economically in the agriculture industry along with glass production, cleaning materials, paint, bleaching powders, and general laboratory purposes. In this study, potassium extraction from K-feldspar ore with an 8.42% K2O content was studied using chloridizing (CaCl2) roasting followed by water leaching. Initially, to produce wollastonite and calcite concentrates, froth flotation tests were conducted on wollastonite-calcite ore after comminution. Thus, wollastonite and calcite concentrates with purities of 99.4% and 91.96% were successfully produced. Then, a calcite concentrate was combined with hydrochloric acid (HCl) under optimal conditions of a 1 mol/L HCl acid concentration, a 60 °C leaching temperature, and a 10 min leaching time to produce CaCl2. To bring out the importance of roasting before the dissolution process, different parameters such as roasting temperature, duration, and feldspar—CaCl2 ratios were tested. Under optimal conditions (a 900 °C roasting temperature, a 60 min duration, and a 1:1.5 feldspar—CaCl2 ratio), 98.6% of the potassium was successfully extracted by the water leaching process described in this article.

scholarly journals Recovery of Cerium Oxide Abrasive from an Abrasive–Glass Polishing Waste through Alkaline Roasting Followed by Water Leaching

Metals ◽  
2020 ◽  
Vol 10 (6) ◽  
pp. 752
Author(s):  
Li-Pang Wang ◽  
Pei-Hsin Liu ◽  
Yan-Jhang Chen
Keyword(s):  
Cerium Oxide ◽  
Polished Glass ◽  
Optimal Conditions ◽  
Mass Ratio ◽  
Polishing Process ◽  
Water Leaching ◽  
Solid Ratio ◽  
Roasting Temperature ◽  
Mineralogical Phases ◽  
Glass Polishing

Abrasive–glass polishing waste is generated from the polishing process of glass components by using cerium oxide abrasive, which contains the cerium oxide abrasive and the polished glass. This study attempted to recover the cerium oxide abrasive from the abrasive–glass polishing waste through removing the polished glass by alkaline roasting using sodium hydroxide (NaOH) followed by water leaching. The experimental results indicated that the polished glass in the abrasive–glass polishing waste could be fully removed under the optimal alkaline roasting and water leaching conditions of roasting temperature of 450 °C, mass ratio of polishing waste to NaOH of 1:1, roasting time of 30 min, leaching pH of 3, leaching temperature of 25 °C, and liquid–solid ratio of 25 mL/g. The characteristics including elemental composition, particle size distribution, mineralogical phases, and morphology of the recovered cerium oxide abrasive obtained under the optimal conditions were similar to those of the original unused one, which was suitable to be reused for polishing again.

Experimental Study on Concentrating Scandium by Leaching from Associated Scandium Ore

2013 ◽  
Vol 734-737 ◽  
pp. 1033-1036
Author(s):  
Gui Fang Zhang ◽  
Peng Yan ◽  
Qing Rong Yang
Keyword(s):  
Experimental Study ◽  
Particle Size ◽  
Hydrochloric Acid ◽  
Acid Concentration ◽  
Hydrochloric Acid Concentration ◽  
Leaching Rate ◽  
Optimal Conditions ◽  
Research Results ◽  
Solid Ratio ◽  
Leaching Residue

Based on the benefication of the complex silicate ore containing scandium, the research about aid-leaching agent used in the leaching of the scandium concentrate was been conducted. And the suitable leaching agent and aid-leaching agent which the useful ions entered into leaching liquid and the harmful ions were kept in leaching residue were been found according to the experiment results. For the scandium of sample existed various complex silicate ore as isomorphism form, the research has adopted hydrochloric acid with aid-leaching agent to dissociate the silicate ore and make scandium entering into solution. The research results has shown that the scandium leaching rate could reach 92.06% under the optimal conditions which the hydrochloric acid concentration is 22.8%, the dosage of aid leaching agent is 6%, liquid solid ratio is 4:1, particle size of leaching material totally is less than 0.15mm and leaching time is 8h.

scholarly journals Monoterpenes and Sesquiterpenes of Essential Oils from Psidium Species and Their Biological Properties

Molecules ◽  
2021 ◽  
Vol 26 (4) ◽  
pp. 965
Author(s):  
Renan Campos e Silva ◽  
Jamile S. da Costa ◽  
Raphael O. de Figueiredo ◽  
William N. Setzer ◽  
Joyce Kelly R. da Silva ◽  
...  
Keyword(s):  
Essential Oils ◽  
Biological Activities ◽  
Biological Properties ◽  
Chemical Diversity ◽  
New Drugs ◽  
Natural Sources ◽  
Biological Potential ◽  
The World ◽  
Review Reports ◽  
Collection Sites

Psidium (Myrtaceae) comprises approximately 266 species, distributed in tropical and subtropical regions of the world. Psidium taxa have great ecological, economic, and medicinal relevance due to their essential oils’ chemical diversity and biological potential. This review reports 18 Psidium species growing around the world and the chemical and biological properties of their essential oils. Chemically, 110 oil records are reported with significant variability of volatile constituents, according to their seasonality and collection sites. Monoterpenes and sesquiterpenes with acyclic (C10 and C15), p-menthane, pinane, bisabolane, germacrane, caryophyllane, cadinane, and aromadendrane skeleton-types, were the primary constituents. The essential oils showed various biological activities, including antioxidant, antifungal, antibacterial, phytotoxic, larvicidal, anti-inflammatory, and cytotoxic properties. This review contributes to the Psidium species rational and economic exploration as natural sources to produce new drugs.

scholarly journals The Correlation of Roasting Conditions in Selective Potassium Extraction from K-Feldspar Ore

Minerals ◽  
2019 ◽  
Vol 9 (2) ◽  
pp. 109 ◽  
Author(s):  
Mete Tayhan Serdengeçti ◽  
Hüseyin Baştürkcü ◽  
Fırat Burat ◽  
Murat Olgaç Kangal
Keyword(s):  
Economic Benefits ◽  
Earth’S Crust ◽  
Optimum Conditions ◽  
Agriculture Industry ◽  
Wide Range ◽  
Ceramic Glass ◽  
Leaching Experiments ◽  
Roasting Temperature ◽  
Earth's Crust ◽  
Direct Leaching

Feldspar minerals are essential ingredients for the glass and ceramic-glass industries. The potassium element found in certain proportions in the composition of K-feldspar minerals has a fundamental function in the growth of plants. The production of potassium fertilizers is mostly made from the soluble minerals, which are located in lakes. Despite having a huge area of use in the agriculture industry, the reserves of these salts are limited and not evenly distributed in the earth’s crust. Due to the high availability of feldspar reserves in the earth’s crust, the production of potential potassium salts can provide a wide range of social and economic benefits. In this study, potassium extraction from a feldspar ore, which contained microcline, albite, muscovite, and quartz, was studied using chloridizing (CaCl2) roasting followed by leaching. Direct leaching experiments were also performed on the sample by adapting various solvents. To emphasize the importance of roasting before the dissolution process, different parameters such as particle size, roasting temperature, and duration, as well as the feldspar/CaCl2 ratio, were tested. Under the optimum conditions (i.e., −106 microns, 850 Co, 60 minutes, 1:1.5 feldspar:CaCl2), 99% of the potassium was successfully extracted from the ore feed.

Reduction-Roast Leaching of Low-Grade Pyrolusite Using Bagasse as a Reducing Agent

2013 ◽  
Vol 699 ◽  
pp. 28-33 ◽  
Author(s):  
Yun Fei Long ◽  
Jing Su ◽  
Xian Jia Ye ◽  
Hai Feng Su ◽  
Yan Xuan Wen
Keyword(s):  
Sulfuric Acid ◽  
Acid Concentration ◽  
Sulfuric Acid Concentration ◽  
Weight Ratio ◽  
Reducing Agent ◽  
Manganese Sulfate ◽  
Low Grade ◽  
Manganese Ore ◽  
Optimal Conditions ◽  
Roasting Temperature

Bagasse, a fibrous residue from sugarcane juice extraction, was used as a reducing agent to roast low-grade pyrolusite in N2. The roasted ore was further leached using sulfuric acid, to convert manganese oxide in the ore to manganese sulfate. The effects of weight ratio of bagasse to manganese ore, roasting temperature, roasting time, leaching temperature, leaching time, stirring speed and sulfuric acid concentration on the leaching recovery of manganese were investigated. Optimal conditions were determined to be a bagasse to manganese ore weight ratio of 0.8:10, roasting temperature of 500°C for 40 min, leaching stirring speed of 100 rpm, sulfuric acid concentration of 3 mol•L-1 and leaching temperature of 50°C for 40 min. The leaching recovery rate of manganese was up to 97.8% at the optimal conditions.

scholarly journals Glass Beads, Markers of Ancient Trade in Sub-Saharan Africa: Methodology, State of the Art and Perspectives

Heritage ◽  
2019 ◽  
Vol 2 (3) ◽  
pp. 2343-2369 ◽  
Author(s):  
Farahnaz Koleini ◽  
Philippe Colomban ◽  
Innocent Pikirayi ◽  
Linda C. Prinsloo
Keyword(s):  
Glass Production ◽  
Glass Beads ◽  
Sub Saharan Africa ◽  
Secondary Phases ◽  
Ancient Trade ◽  
The World ◽  
History Of ◽  
Production Technologies ◽  
The Indian Ocean ◽  
Sub Saharan

Glass beads have been produced and traded for millennia all over the world for use as everyday items of adornment, ceremonial costumes or objects of barter. The preservation of glass beads is good and large hoards have been found in archaeological sites across the world. The variety of shape, size and colour as well as the composition and production technologies of glass beads led to the motivation to use them as markers of exchange pathways covering the Indian Ocean, Africa, Asia, Middle East, the Mediterranean world, Europe and America and also as chronological milestones. This review addresses the history of glass production, the methodology of identification (morphology, colour, elemental composition, glass nanostructure, colouring and opacifying agents and secondary phases) by means of laboratory based instruments (LA-ICP-MS, SEM-EDS, XRF, NAA, Raman microspectroscopy) as well as the mobile instruments (pXRF, Raman) used to study glass beads excavated from sub-Saharan African sites. Attention is paid to the problems neglected such as the heterogeneity of glass (recycled and locally reprocessed glass). The review addresses the potential information that could be extracted using advanced portable methods of analysis.

scholarly journals THE USE OF SEWAGE SLUDGE AND ITS ASH IN CONSTRUCTION AND AGRICULTURE INDUSTRY: A REVIEW

2019 ◽  
Vol 81 (5) ◽  
Author(s):  
Mohd Amin Shafii ◽  
Eunice Chia Mei Ling ◽  
Ekarizan Shaffie
Keyword(s):  
Chemical Composition ◽  
Sewage Sludge ◽  
Soil Stabilization ◽  
Treatment Plant ◽  
Sewage Sludge Ash ◽  
Local Municipalities ◽  
Agriculture Industry ◽  
The World ◽  
Cement Mixture ◽  
Sludge Ash

Harmful sewage sludge generated from wastewater treatment plant being disposed to landfill has long caused major anxiety in local municipalities around the world. In line with the concept of sustainable development practice being adopted around the world, more efforts has looked deeper into ways to reuse this waste material and one of it was the ash generated from this material. This paper review the use of sewage sludge and sewage sludge ash (SSA) in construction and agriculture industry through a multi-faceted review of previous researches done in various industries. Besides reducing the amount of waste in landfill, this solution can also contribute to the reduction of natural resources consumption. It examines in detail how the various burning temperature can affect the sewage sludge ash as well as the potential usage of this ash in asphalt, concrete and cement mixture, soil stabilization and agriculture either as a substitute material, or as a raw and enhancement material. The various chemical composition in this ash enable the SSA to be used in application in multiple industry as each of the respective chemical composition bring enhancement to the end product respectively.

Study of Extraction of Total Alkaloids from Caulophyllum Robustum

2013 ◽  
Vol 395-396 ◽  
pp. 601-604
Author(s):  
Jian Lan Suo
Keyword(s):  
Hydrochloric Acid ◽  
Cation Exchange ◽  
Acid Leaching ◽  
Optimal Conditions ◽  
Exchange Column ◽  
Total Alkaloids ◽  
Column Volume ◽  
Hydrochloric Acid Leaching ◽  
Cation Exchange Column ◽  
Caulophyllum Robustum

Objective: Optimizing the extraction of total alkaloids from Caulophyllum robustum. Methods: The taspine which is a type of alkaloids of Caulophyllum robustum is selected as the target index. First, developing the HPLC analysis protocol; second, using orthogonal design method to optimize the hydrochloric acid leaching protocol; third, using cation exchange column to isolate the alkaloids and examining the optimal conditions. Results: the optimal conditions of hydrochloric acid leaching protocol is using 7 column volume of 1% hydrochloric acid for 3 times. The materials are loaded onto the LSD001 cation exchange column with optimal pH 4 and flowrate 2ml/mL, the elution buffer is 10 column volume 5% hydrochloric acid. After desalting, the yield of alkaloids is 1.35% which includes 6.83% of taspine.

Effective Extraction of Vanadium and Chromium from High Chromium Content Vanadium Slag by Sodium Roasting and Water Leaching

2016 ◽  
Vol 863 ◽  
pp. 144-148 ◽  
Author(s):  
Ming Li ◽  
Liang Xiao ◽  
Jing Jing Liu ◽  
Zhi Xin Shi ◽  
Zi Bi Fu ◽  
...  
Keyword(s):  
Chromium Content ◽  
Leaching Rate ◽  
Vanadium Slag ◽  
Water Leaching ◽  
Sodium Salts ◽  
High Chromium ◽  
Effective Factor ◽  
Roasting Process ◽  
Roasting Temperature ◽  
Roasting Time

The extraction of vanadium and chromium from high chromium content vanadium slag by salt roasting and water leaching process has been investigated, which uses mixed sodium salts (Na2CO3 and NaOH) as additive agent in roasting process. The mineralogical morphology was prospected by TG-DSC, XRD, SEM and EDS. The oxidation of slag and transversion of V/Cr-containing phase and sodium salts have been discussed. It has been demonstrated that the presence of NaOH contributes to decompose spinel and olivine phases, which is beneficial to reduce the roasting temperature and elevate V, Cr leaching ratio. The roasting parameters have been studied as a function of roasting temperature, roasting time and ratio of alkali, in which the roasting temperature is the most effective factor on the leaching rate of vanadium and chromium. Under the optimum condition, the leaching rates of V and Cr reached 95.8% and 97.6%, respectively.

Sign in / Sign up

Export Citation Format

Share Document