Edible Chitosan Films and Their Nanosized Counterparts Exhibit Antimicrobial Activity and Enhanced Mechanical and Barrier Properties

Chitosan and chitosan-nanoparticles were combined to prepare biobased and unplasticized film blends displaying antimicrobial activity. Nanosized chitosans obtained by sonication for 5, 15, or 30 min were combined with chitosan at 3:7, 1:1, and 7:3 ratios, in order to adjust blend film mechanical properties and permeability. The incorporation of nanosized chitosans led to improvements in the interfacial interaction with chitosan microfibers, positively affecting film mechanical strength and stiffness, evidenced by scanning electron microscopy. Nanosized or blend chitosan film sensitivity to moisture was significantly decreased with the drop in biocomposite molecular masses, evidenced by increased water solubility and decreased water vapor permeability. Nanosized and chitosan interactions gave rise to light biobased films presenting discrete opacity and color changes, since red-green and yellow-blue colorations were affected. All chitosan blend films exhibited antimicrobial activity against both Gram-positive and Gram-negative bacteria. The performance of green unplasticized chitosan blend films displaying diverse morphologies has, thus, been proven as a potential step towards the design of nontoxic food packaging biobased films, protecting against spoilage microorganisms, while also minimizing environmental impacts.

Download Full-text

Characterization of Food Packaging Films with Blackcurrant Fruit Waste as a Source of Antioxidant and Color Sensing Intelligent Material

Molecules ◽

10.3390/molecules26092569 ◽

2021 ◽

Vol 26 (9) ◽

pp. 2569

Author(s):

Mia Kurek ◽

Nasreddine Benbettaieb ◽

Mario Ščetar ◽

Eliot Chaudy ◽

Maja Repajić ◽

...

Keyword(s):

Food Packaging ◽

Water Solubility ◽

Color Change ◽

Chitosan Film ◽

Water Vapor Permeability ◽

Vapor Permeability ◽

Color Changes ◽

Insoluble Particles ◽

Polymer Stability ◽

Food Packaging Films

Chitosan and pectin films were enriched with blackcurrant pomace powder (10 and 20% (w/w)), as bio-based material, to minimize food production losses and to increase the functional properties of produced films aimed at food coatings and wrappers. Water vapor permeability of active films increased up to 25%, moisture content for 27% in pectin-based ones, but water solubility was not significantly modified. Mechanical properties (tensile strength, elongation at break and Young’s modulus) were mainly decreased due to the residual insoluble particles present in blackcurrant waste. FTIR analysis showed no significant changes between the film samples. The degradation temperatures, determined by DSC, were reduced by 18 °C for chitosan-based samples and of 32 °C lower for the pectin-based samples with blackcurrant powder, indicating a disturbance in polymer stability. The antioxidant activity of active films was increased up to 30-fold. Lightness and redness of dry films significantly changed depending on the polymer type. Significant color changes, especially in chitosan film formulations, were observed after exposure to different pH buffers. This effect is further explored in formulations that were used as color change indicators for intelligent biopackaging.

Download Full-text

Conducting/biodegradable chitosan-polyaniline film; Antioxidant, color, solubility and water vapor permeability properties

Main Group Chemistry ◽

10.3233/mgc-210007 ◽

2021 ◽

Vol 20 (2) ◽

pp. 133-147

Author(s):

Sajad Pirsa ◽

Behzad Mohammadi

Keyword(s):

Water Vapor ◽

Food Packaging ◽

Water Solubility ◽

Light Transmission ◽

Antioxidant Properties ◽

Chitosan Film ◽

Water Vapor Permeability ◽

Vapor Permeability ◽

Surface Color ◽

Synthesis Time

In this study, chitosan-polyaniline nanocomposite film was prepared in combination with different concentrations of polyaniline at various synthesis times. Surface morphology, antioxidant properties, water solubility, water vapor permeability (WVP), color properties and light transparency properties of the films were investigated. The size, shape and morphology of the synthesized particles were examined with scanning electron microscopy (SEM) technique. The results indicated that the synthesized polyaniline particles were spherical and in the range of 45–70 nm. The results obtained from the study of the effect of polyaniline on the physical properties of the chitosan film showed that increasing polyaniline concentration and synthesis time causes a decrease in the rate of the water solubility and water vapor permeability. This is an important factor in expanding its use in food packaging. The results of the colorimetric studies showed that the polyaniline sharply changed the surface color of the film. Polyaniline also increased antioxidant properties of composite film. Investigating the light transmission and transparency of the films showed that the polyaniline reduced the transparency and transmission of light, which could be used to package products that are susceptible to oxidation in the light.

Download Full-text

Physical and Barrier Properties of Polylactic Acid/Halloysite Nanotubes-Titanium Dioxide Nanocomposites

Materials Science Forum ◽

10.4028/www.scientific.net/msf.1021.280 ◽

2021 ◽

Vol 1021 ◽

pp. 280-289

Author(s):

Abdulkader M. Alakrach ◽

Awad A. Al-Rashdi ◽

Mohamed Khalid Al-Omar ◽

Taha M. Jassam ◽

Sam Sung Ting ◽

...

Keyword(s):

Water Vapor ◽

Food Packaging ◽

Water Solubility ◽

Water Vapor Permeability ◽

Barrier Properties ◽

Halloysite Nanotubes ◽

Nanocomposite Films ◽

Vapor Permeability ◽

Water Contact ◽

Film Density

In this study, PLA/TiO2 and PLA/HNTs-TiO2 nanocomposites films were fabricated via solution casting method. By testing the film density, solubility, water contact angle and water vapor permeability, the PLA nanocomposite films, the comprehensive performances of the nanocomposites were analysed. The outcomes demonstrated that maximum film density of PLA/TiO2 and PLA/HNTs-TiO2 nanocomposites films increased gradually with the increasing of nanofiller loadings. Moreover, the incorporation of TiO2 and HNTs-TiO2 significantly decreased the water vapor transmittance rate of the nanocomposite films with a slight priority to the addition of HNTs-TiO2, the water solubility was significantly improved with the addition of both nanofillers. Furthermore, the barrier properties were developed with the addition of both TiO2 and HNTs-TiO2 especially after the addition of low nanofiller loadings. Overall, the performance of the PLA/HNTs-TiO2 nanocomposite films was better than that PLA/TiO2 film. Nevertheless, both of the PLA nanocomposite samples achieved the requests of food packaging applications.

Download Full-text

Antimicrobial Activity of Lactoferrin against Foodborne Pathogenic Bacteria Incorporated into Edible Chitosan Film

Journal of Food Protection ◽

10.4315/0362-028x-71.2.319 ◽

2008 ◽

Vol 71 (2) ◽

pp. 319-324 ◽

Cited By ~ 26

Author(s):

CYNTHIA A. BROWN ◽

BAOWU WANG ◽

JUN-HYUN OH

Keyword(s):

Antimicrobial Activity ◽

Pathogenic Bacteria ◽

Chitosan Film ◽

Water Vapor Permeability ◽

Barrier Properties ◽

Antimicrobial Activities ◽

Vapor Permeability ◽

E Coli ◽

Combination Effects ◽

Chitosan Films

The objectives of this research were to develop and characterize edible chitosan film containing lactoferrin as a natural antimicrobial agent, and to investigate the combination effects of lactoferrin with lysozyme in chitosan film against the growth of Escherichia coli O157:H7 and Listeria monocytogenes. Chitosan films containing lactoferrin, lysozyme, or nisin were fabricated, and the antimicrobial concentrations were 0.5, 1, or 2 mg in a circular disc of chitosan film. Three concentrations of lactoferrin or EDTA (0.28, 0.56, or 1.12 mg per disc) were also incorporated into the chitosan film containing lysozyme to investigate the combination effects of lactoferrin. The water barrier properties of the chitosan films containing lactoferrin were characterized. The antimicrobial activities against E. coli O157:H7 and L. monocytogenes were determined using the agar diffusion assay and cell count assay. The chitosan films containing lactoferrin less than 1 mg per disc did not alter the water vapor permeability of the chitosan film. Although the film containing lysozyme exhibited significant antimicrobial activity, the incorporation of lactoferrin alone into chitosan film did not exhibit significant antimicrobial activity against both E. coli O157:H7 and L. monocytogenes. However, the combination of lactoferrin with lysozyme-containing chitosan film significantly decreased the growth of E. coli O157:H7, exhibiting a comparable effect to that of the combination of EDTA with lysozyme (P < 0.05). Furthermore, the combination of lactoferrin with lysozyme in chitosan film exhibited greater reduction in the growth of L. monocytogenes than did the combination EDTA with lysozyme, resulting in an approximate 3-log reduction.

Download Full-text

Preparation and Characterization of Edible Dialdehyde Carboxymethyl Cellulose Crosslinked Feather Keratin Films for Food Packaging

Polymers ◽

10.3390/polym12010158 ◽

2020 ◽

Vol 12 (1) ◽

pp. 158

Author(s):

Yao Dou ◽

Liguang Zhang ◽

Buning Zhang ◽

Ming He ◽

Weimei Shi ◽

...

Keyword(s):

Water Vapor ◽

Carboxymethyl Cellulose ◽

Food Packaging ◽

Light Transmission ◽

Value Added ◽

Water Vapor Permeability ◽

Barrier Properties ◽

Edible Films ◽

Vapor Permeability ◽

Feather Keratin

The development of edible films based on the natural biopolymer feather keratin (FK) from poultry feathers is of great interest to food packaging. Edible dialdehyde carboxymethyl cellulose (DCMC) crosslinked FK films plasticized with glycerol were prepared by a casting method. The effect of DCMC crosslinking on the microstructure, light transmission, aggregate structure, tensile properties, water resistance and water vapor barrier were investigated. The results indicated the formation of both covalent and hydrogen bonding between FK and DCMC to form amorphous FK/DCMC films with good UV-barrier properties and transmittance. However, with increasing DCMC content, a decrease in tensile strength of the FK films indicated that plasticization, induced by hydrophilic properties of the DCMC, partly offset the crosslinking effect. Reduction in the moisture content, solubility and water vapor permeability indicated that DCMC crosslinking slightly reduced the moisture sensitivity of the FK films. Thus, DCMC crosslinking increased the potential viability of the FK films for food packaging applications, offering a value-added product.

Download Full-text

Physical Properties and Antimicrobial Activity of a Poly(Lactic Acid)/Poly(Trimethylene Carbonate) Film Incorporated with Thymol

Advanced Materials Research ◽

10.4028/www.scientific.net/amr.884-885.481 ◽

2014 ◽

Vol 884-885 ◽

pp. 481-484 ◽

Cited By ~ 2

Author(s):

Yan Wu ◽

Ming Wei Yuan ◽

Ji Yi Yang ◽

Yu Yue Qin ◽

Ming Long Yuan ◽

...

Keyword(s):

Antimicrobial Activity ◽

Lactic Acid ◽

Water Vapor ◽

Composite Film ◽

Food Packaging ◽

Water Vapor Permeability ◽

Antimicrobial Activities ◽

Poly Lactic Acid ◽

Vapor Permeability ◽

Trimethylene Carbonate

Thymol (TH), which has antimicrobial effect on many food pathogens, was incorporated as antimicrobial agent into composite poly (lactic acid)/poly (trimethylene carbonate)(PLA-PTMC) films. Antimicrobial active films based on PLA-PTMC were prepared by incorporating thymol at five different concentrations: 0, 3, 6, 9 and 12 %(w/w). The mechanical characterization, water vapor permeability (WVP), and antimicrobial activity of all formulations composite film were carried out. A decrease in elastic modulus was obtained for the active composite film compared with neat PLA-PTMC film. The presence of thymol decreased water vapor permeability, with a significant antimicrobial activity. Antimicrobial activities of films were tested against Escherichia coli, Staphylococcus aurous, Listeria, Bacillus subtilis, and Salmonella. Increasing amount of the thymol in the film caused a significant increase in inhibitory zones. These results suggest that thymol incorporated PLA-PTMC films have a prospectively potential in antimicrobial food packaging.

Download Full-text

Characterization of Barnyard Millet Starch Films Containing Borage Seed Oil

Coatings ◽

10.3390/coatings7110183 ◽

2017 ◽

Vol 7 (11) ◽

pp. 183 ◽

Cited By ~ 5

Author(s):

Thi Cao ◽

So-Young Yang ◽

Kyung Song

Keyword(s):

Antioxidant Activity ◽

Seed Oil ◽

Water Solubility ◽

Antioxidant Activities ◽

Water Vapor Permeability ◽

Barrier Properties ◽

B Value ◽

Edible Films ◽

Vapor Permeability ◽

Barnyard Millet

In this study, barnyard millet starch (BMS) was used to prepare edible films. Antioxidant activity was conferred to the BMS film by incorporating borage seed oil (BO). The physical, optical, and thermal properties as well as antioxidant activities of the films were evaluated. The incorporation of BO into the BMS films decreased the tensile strength from 9.46 to 4.69 MPa and increased the elongation at break of the films from 82.49% to 103.87%. Water vapor permeability, water solubility, and moisture content of the BMS films decreased with increasing BO concentration, whereas Hunter b value and opacity increased, L and a values of the films decreased. The BMS films containing BO exhibited antioxidant activity that increased proportionally with increased BO concentration. In particular, the BMS film with 1.0% BO exhibited the highest antioxidant activity and light barrier properties among the BMS films. Therefore, the BMS films with added BO can be used as an antioxidant packaging material.

Download Full-text

Effect of chitosan addition in starch and poly(lactic acid) sheets produced by extrusion

Revista Brasileira de Pesquisa em Alimentos ◽

10.14685/rebrapa.v6i1.208 ◽

2015 ◽

Vol 6 (1) ◽

pp. 80

Author(s):

Matheus Luz Alberti ◽

Sílvio José De Souza ◽

Heliberto Gonçalves ◽

Fabio Yamashita ◽

Marianne Ayumi Shirai

Keyword(s):

Lactic Acid ◽

Water Vapor ◽

Food Packaging ◽

Water Vapor Permeability ◽

Barrier Properties ◽

Extrusion Process ◽

Pilot Scale ◽

Poly Lactic Acid ◽

Vapor Permeability ◽

Water Vapor Barrier

The use of blends containing biodegradable polymers like starch and poly (lactic acid) (PLA) has gained considerable attention, especially for the food packaging production. Current research has also highlighted the use of chitosan because their antimicrobial activity, biodegradability and applicability in the production of active biodegradable food packaging. The objective of this work was to produce cassava starch and PLA sheets incorporated with chitosan by flat extrusion process (calendering-extrusion), and evaluate the mechanical, water vapor barrier and microstructural properties. In order to simplify the obtainment of the material reducing processing steps, all components of the blend were homogenized in one step extrusion The incorporation of chitosan in the starch/PLA sheets decreased significantly the tensile strength, Young's modulus, elongation at break and density. In addition, the scanning electron microscopy images showed the formation of non-homogeneous mixtures with the presence of pores between the blend compounds, and this fact affected the water vapor barrier properties increasing water vapor permeability, solubility and diffusion coefficients. It was possible to conclude that although the incorporation of chitosan to the starch/PLA sheets has not contributed to obtain materials with suitable properties, it was able to produce them by calendering-extrusion process in pilot scale. Studies about chitosan incorporation in starch and PLA sheets still needed. DOI: 10.14685/rebrapa.v6i1.208

Download Full-text

Physical Properties of Starch/Powdered Activated Carbon Composite Films

Polymers ◽

10.3390/polym13244406 ◽

2021 ◽

Vol 13 (24) ◽

pp. 4406

Author(s):

Anita Kwaśniewska ◽

Michał Świetlicki ◽

Adam Prószyński ◽

Grzegorz Gładyszewski

Keyword(s):

Mechanical Properties ◽

Activated Carbon ◽

Water Vapor ◽

Water Solubility ◽

Composite Films ◽

Water Vapor Permeability ◽

Barrier Properties ◽

Carbon Composite ◽

Powdered Activated Carbon ◽

Vapor Permeability

In the present study, starch/powdered activated carbon composite films were prepared by incorporating various amounts of powdered activated carbon (PAC)—1–5, 10, and 15 %—into a starch matrix, using the solvent casting method. The effect of PAC addition on the biopolymer film was investigated. The mechanical properties were examined by ultra-nanoindentation, nanoscratch, and micro-tensile tests. Since the mechanical properties of biopolymer films are correlated with their structure, the effect of PAC addition was tested using X-ray diffraction. The surface parameters morphology and wettability were analyzed by atomic force microscopy (AFM) and contact angle measurements. The barrier properties were examined by determining water vapor permeability and the water solubility index. The obtained results did not show a monotonic dependence of the mechanical parameters on PAC content, with the exception of the maximum strain, which decreased as the amount of the additive increased. The visible effect of PAC addition was manifested in changes in the adhesive force value and in water vapor permeability (WVP). The barrier properties decreased with the increase of the filler content.

Download Full-text

Effect of Surfactant on the Formation of Chitosan/ε-Polycaprolactone Blend Films for Food Packaging Applications

10.21203/rs.3.rs-804708/v1 ◽

2021 ◽

Author(s):

Ana Catarina Damasceno Gomes ◽

Karoline Ferreira Silva ◽

Anderson Junior Freitas ◽

Kelvi Wilson Evaristo Miranda ◽

Taline Amorim Santos ◽

...

Keyword(s):

Food Packaging ◽

Water Vapor Permeability ◽

Tween 80 ◽

Continuous Phase ◽

Vapor Permeability ◽

Mechanical And Thermal Properties ◽

Amino Groups ◽

Multilayer Systems ◽

Blend Films ◽

High Interaction

Abstract The objective of this study was to develop and characterize chitosan-ε-polycaprolactone (CHI/PCL) polymer blends with Tween 80 as a compatibilizer for application in packaging. The blends were produced by casting, with up to 10% (w/w) PCL in the CHI matrix. These blends were characterized in terms of their microstructure, chemical interactions, mechanical and thermal properties, solubility and water vapor permeability (WVP). The micrographs showed microsphere-like structures from the PCL in the continuous phase of CHI. Fourier transform infrared spectroscopy (FTIR) indicated a high interaction between CHI amino groups and PCL carbonyls, resulting in blends with greater ductility than the pure CHI film, thus providing greater flexibility. In the crystallinity analyses, the presence of PCL favored an increase in crystalline regions, limiting the passage of light. Given the results, blends are an alternative for application in multilayer systems and can be considered for use as a biodegradable fraction in food packaging.

Download Full-text