Development and testing of procedures for detecting HPV 6 and HPV 16 DNA in water samples

The present study aims to develop and test procedures for detecting the DNA of dangerous human papillomaviruses (HPV) types 6 and 16 in water samples. The conserved segments of HPV 6 L1 and HPV 16 L1 nucleic acid sequences were studied using bioinformatic methods with the help of the NCBI (National Center for Biotechnology Information) database and the BioEdit program. A total of 135 nucleic acid sequences of HPV6 L1 and 945 nucleic acid sequences of HPV16 L1 were examined. Five pairs of specific primers were developed for the identified conserved segments of nucleic acid sequences using specialized programs (PerlPrimer v.1.1.21, FastPCR 6.6, and Primer3Plus). In addition, several procedures for collecting samples from various water bodies located near Listvyanka settlement (Lake Baikal) were tested. The samples were subjected to comprehensive purification from insoluble particles and bacterial contamination to be tested for the presence of HPV DNA via PCR analysis using primers complementary to the nucleic acid sequences of HPV6 L1 and HPV16 L1. The conducted studies revealed HPV 6 and HPV 16 DNA in the water samples. Due to the use of the developed and tested procedures for collecting and examining samples from various water sources in the Baikal Natural Territory followed by a PCR analysis, it was possible to detect the presence of dangerous viruses. The proposed procedure of testing water samples for the presence of HPV can be useful in developing effective monitoring of water bodies and wastewater both in Baikal and other regions.

Hygroscopicity of Polycatechol and Polyguaiacol Secondary Organic Aerosol in sub- and supersaturated water vapor environments

Polycatechol and polyguaiacol are light-absorbing and water-insoluble particles that efficiently form from iron-catalyzed reactions with aromatic compounds from biomass burning emissions. Little quantitative information is known about their water uptake...

Data Mining-Based Stability and Prescription Analysis of Neonatal Parenteral Nutrition Solution

In order to evaluate the stability of neonatal parenteral nutrition solution, in this paper, the prescription of neonatal parenteral nutrition solution was investigated and analyzed. The formula of neonatal parenteral nutrition solution used, particularly the one utilized in this study, is commonly used in clinical practice. All the neonatal parenteral nutrition solution required for the test was prepared on the purification workbench in a sterile environment. The time points of stability of parenteral nutrient solution were 0, 12, and 24 hours, respectively, and three parallel samples were taken at each time point. Likewise, to investigate the stability of two kinds of fat milk injection in parenteral nutrition solution of neonates and provide a reference for subsequent experiments and to investigate the influence of electrolyte, amino acid, temperature, pH value, mixing sequence, and the final concentration of glucose on the stability of neonatal parenteral nutrition solution, the stability indexes of neonatal parenteral nutrition liquid mainly include appearance, pH, insoluble particles, fat milk particle size, and particle size distribution. Neonatal parenteral nutrition solution prescriptions from the First Affiliated Hospital of Jinan University, specifically from January to June 2019, were collected and statistically processed. The experimental data were processed by SPSS 19.0 software and data mining technology. The results were expressed as mean ± standard deviation and statistically processed by ANOVA. P < 0.05 was considered statistically significant. The results showed that the stability of neonatal parenteral nutrient solution was influenced by many factors. The formula of neonatal parenteral nutrition solution is generally reasonable, but there are unreasonable phenomena which are needed to be improved further if feasible.

Universal Enzyme-Based Field Workflow for Rapid and Sensitive Quantification of Water Pathogens

A universal filtration and enzyme-based workflow has been established to allow for the rapid and sensitive quantification of leading pathogens Cryptosporidium parvum, Giardia gamblia, Campylobacter jejuni, and Escherichia coli from tap water samples with volumes up to 100 mL, and the potential to scale up to larger volumes. qPCR limits of quantification as low as four oocysts for Cryptosporidium, twelve cysts for Giardia, two cells for C. jejuni, and nineteen cells for E. coli per reaction were achieved. A polycarbonate filter-based sampling method coupled with the prepGEM enzyme-based DNA extraction system created a single-step transfer workflow that required as little as 20 min of incubation time and a 100 µL reaction mix. The quantification via qPCR was performed directly on the prepGEM extract, bypassing time-consuming, labour-intensive conventional culture-based methods. The tap water samples were shown to contain insoluble particles that inhibited detection by reducing the quantification efficiency of a representative pathogen (C. jejuni) to 30–60%. This sample inhibition was effectively removed by an on-filter treatment of 20% (v/v) phosphoric acid wash. Overall, the established workflow was able to achieve quantification efficiencies of 92% and higher for all four leading water pathogens, forming the basis of a rapid, portable, and low-cost solution to water monitoring.

Comparison of Pharmaceutical Characteristics between Brand-Name Meropenem and Its Generics

This study aimed to provide comparative information of pharmaceutical properties, including particle morphology and distribution uniformity, solubility, presence of residual solvent and insoluble particles, and antimicrobial activities, between brand-name meropenem (Mepem®, BNM) and its six generic products (GPs A-F) marketed in China. Particles of GP-A and -C in dry powder had similar diameters of BNM, while other GPs were larger. Only BNM and GP-A were completely dissolved within 100 s in the lab condition. No insoluble particles >25 μm in diameter were detected in BNM and GP-E. Regarding stability of GPs solutions evaluated by concentration of open-ring metabolites at 6 h and 8 h, BNM showed the lowest open-ringed metabolite concentrates. Residual solvent of acetone detected in one GP showed the maximum value, while ethanol and ethyl acetate were detected both in product E and product F. The concordance rates (%) of minimum inhibitory concentration (MIC) of each generic compared to BNM were 89.5, 85, 87.5, 88, 88.5, and 86.5, respectively, although no significant difference was reached in MIC. Pharmaceutical characteristic differences between the BNM and GPs identified in this study could provide insights into understanding the deviations in the drug manufacturing processes of generic drugs.

Bindin is essential for fertilization in the sea urchin

Species-specific sperm−egg interactions are essential for sexual reproduction. Broadcast spawning of marine organisms is under particularly stringent conditions, since eggs released into the water column can be exposed to multiple different sperm. Bindin isolated from the sperm acrosome results in insoluble particles that cause homospecific eggs to aggregate, whereas no aggregation occurs with heterospecific eggs. Therefore, Bindin is concluded to play a critical role in fertilization, yet its function has never been tested. Here we report that Cas9-mediated inactivation of the bindin gene in a sea urchin results in perfectly normal-looking embryos, larvae, adults, and gametes in both males and females. What differed between the genotypes was that the bindin−/− sperm never fertilized an egg, functionally validating Bindin as an essential gamete interaction protein at the level of sperm–egg cell surface binding.

Rheological Characterization of a Concentrated Phosphate Slurry

Phosphate ore slurry is a suspension of insoluble particles of phosphate rock, the primary raw material for fertilizer and phosphoric acid, in a continuous phase of water. This suspension has a non-Newtonian flow behavior and exhibits yield stress as the shear rate tends toward zero. The suspended particles in the present study were assumed to be noncolloidal. Various grades and phosphate ore concentrations were chosen for this rheological investigation. We created some experimental protocols to determine the main characteristics of these complex fluids and established relevant rheological models with a view to simulate the numerical flow in a cylindrical pipeline. Rheograms of these slurries were obtained using a rotational rheometer and were accurately modeled with commonly used yield-pseudoplastic models. The results show that the concentration of solids in a solid–liquid mixture could be increased while maintaining a desired apparent viscosity. Finally, the design equations for the laminar pipe flow of yield pseudoplastics were investigated to highlight the role of rheological studies in this context.

Characterization of Food Packaging Films with Blackcurrant Fruit Waste as a Source of Antioxidant and Color Sensing Intelligent Material

Chitosan and pectin films were enriched with blackcurrant pomace powder (10 and 20% (w/w)), as bio-based material, to minimize food production losses and to increase the functional properties of produced films aimed at food coatings and wrappers. Water vapor permeability of active films increased up to 25%, moisture content for 27% in pectin-based ones, but water solubility was not significantly modified. Mechanical properties (tensile strength, elongation at break and Young’s modulus) were mainly decreased due to the residual insoluble particles present in blackcurrant waste. FTIR analysis showed no significant changes between the film samples. The degradation temperatures, determined by DSC, were reduced by 18 °C for chitosan-based samples and of 32 °C lower for the pectin-based samples with blackcurrant powder, indicating a disturbance in polymer stability. The antioxidant activity of active films was increased up to 30-fold. Lightness and redness of dry films significantly changed depending on the polymer type. Significant color changes, especially in chitosan film formulations, were observed after exposure to different pH buffers. This effect is further explored in formulations that were used as color change indicators for intelligent biopackaging.

The Effect of Electrochemical Composite Coatings with LaF3-LaB6 Particles in Nickel–Copper Matrix on the Metallurgical Processes in Arc Welding of Low Alloy Ferrite-Pearlite Steels

Development of welding consumables with fluorides and borides of rare earth metals is a promising area for improving the weldability of low alloy steels. As lanthanum fluoride and boride dissociate, lanthanum and boron dissolve in the weld pool and the welding arc plasma is saturated with fluorine. As a result of FeO, MnO, SiO2 deoxidation and FeS, MnS desulfurization, refractory lanthanum sulfides and oxides La2O3, La2S3 are formed in the weld pool, which can be the crystallization nuclei in the weld pool and the origin of acicular ferrite nucleation. The paper proposes a model of metallurgical processes in the arc and weld pool, as well as a model of electrochemical adsorption of Ni2+ cations in colloidal electrolytes during electrostatic deposition of nano-dispersed insoluble particles of LaF3 or LaB6 on the surface of wire. The paper discusses the constructional design of the welding wire and the technology for forming electrochemical composite coatings with copper and nickel matrix. The composite wires applied in the welding of low alloy steels make it possible to refine the microstructure, increase the tensile strength by 4% and the impact toughness of welds by 20%.