scholarly journals Preparation of Electrospun Active Molecular Membrane and Atmospheric Free Radicals Capture

Molecules ◽  
2019 ◽  
Vol 24 (17) ◽  
pp. 3037 ◽  
Author(s):  
Wang ◽  
Su ◽  
Yu ◽  
Li ◽  
Ma ◽  
...  
Keyword(s):  
Free Radicals ◽  
Impact Strength ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
High Porosity ◽  
Large Specific Surface Area ◽  
Optimal Parameters ◽  
Electrospun Membranes ◽  
Reaction Capacity

We load the natural active molecules onto the spin film in an array using electrospinning techniques. The electrospun active molecular membranes we obtain in optimal parameters exhibit excellent capacity for scavenging radical. The reaction capacity of three different membranes for free radicals are shown as follow, glycyrrhizin acid membrane > quercetin membrane > α-mangostin membrane. The prepared active molecular electrospun membranes with a large specific surface area and high porosity could increase the interaction area between active molecules and free radicals. Additionally, it also has improved anti-airflow impact strength, anti-contaminant air molecular interference ability, and the ability to capture free radicals.

In-situ controlled synthesis of NiFe MOF materials with excellent electrocatalytic performances for water splitting

2021 ◽  
Vol 14 (02) ◽  
pp. 2151011
Author(s):  
Jingwen Jia ◽  
Longfu Wei ◽  
Ziting Guo ◽  
Fang Li ◽  
Changlin Yu ◽  
...  
Keyword(s):  
Specific Surface ◽  
Surface Area ◽  
Water Splitting ◽  
Specific Surface Area ◽  
High Performance ◽  
Alkaline Condition ◽  
High Porosity ◽  
Large Specific Surface Area ◽  
Electrocatalytic Performance

Metal–organic frameworks (MOFs) are the electrocatalytic materials with large specific surface area, high porosity, controllable structure and monodisperse active center, which is a promising candidate for the application of electrochemical energy conversion. However, the electrocatalytic performance of pure MOFs is seriously limited its poor conductivity and stability. In this work, high-performance electrocatalyst was fabricated through combining NiFe/MOF on nickel foam (NF) via in-situ growth strategy. Through rational control of the time and ratio in reaction precursors, we realized the effective manipulation of the growth behavior, and further investigated the electrocatalytic performance in water splitting. The catalyst presented excellent electrocatalytic performance for water splitting, with low overpotential of 260 mV in alkaline condition at a current density of 50 mA[Formula: see text], which is benefited from the large specific surface area and active sites. This study demonstrates that the rational design of NiFe MOF/NF plays a significant role in high-performance electrocatalyst.

Enhanced Air Filtration Performances by Coating Aramid Nanofibres on a Melt-blown Nonwoven

Nanoscale ◽  
2021 ◽  
Author(s):  
Kangli Xu ◽  
Lei Zhan ◽  
Rui Yan ◽  
Qinfei Ke ◽  
Anlin Yin ◽  
...  
Keyword(s):  
Specific Surface ◽  
Pore Size ◽  
Surface Area ◽  
Specific Surface Area ◽  
Small Diameter ◽  
High Porosity ◽  
Large Specific Surface Area ◽  
Air Filtration ◽  
Small Pore Size ◽  
Small Pore

Nanofibre membranes with small diameter and large specific surface area are widely used in filtration fields due to their small pore size and high porosity. To date, aramid nanofibres (ANFs)...

Nanoflake assembled hierarchical porous flower-like α-Fe2O3 with large specific surface area for enhanced acetone sensing

2020 ◽  
Vol 13 (06) ◽  
pp. 2051038
Author(s):  
Jianxia Zhang ◽  
Li Liu ◽  
Xiaonian Tang ◽  
Dan Sun ◽  
Chunxia Tian ◽  
...  
Keyword(s):  
Specific Surface ◽  
Surface Area ◽  
Calcination Temperature ◽  
Specific Surface Area ◽  
Gas Sensing ◽  
High Porosity ◽  
Large Specific Surface Area ◽  
Minimum Concentration ◽  
Maximum Value ◽  
Hierarchical Porous

High porosity [Formula: see text]-Fe2O3 has attracted a lot of attention due to its exceptional structure. In this paper, nanoflake assembled hierarchical porous flower-like [Formula: see text]-Fe2O3 was prepared by hydrothermal and calcination methods without any additional templates. Scanning electron microscopy (SEM) morphological characterization results show that with the increase of calcination temperature (400∘C, 450∘C, 500∘C, 550∘C, 600∘C), pores appeared. However, the results of nitrogen adsorption show that the specific surface area of the [Formula: see text]-Fe2O3 reaches the maximum value (52.19[Formula: see text]m2/g) when the calcination temperature is 500∘C. The gas sensing performance of flower-like [Formula: see text]-Fe2O3 with different calcination temperature is compared, interestingly, with the increase of calcination temperature, the response of the samples increased first and then decreased, and reached the maximum value (44.2–100 parts per million (ppm) acetone) when the calcination temperature was 500∘C. The minimum concentration for acetone was 200 ppb (response value is 2.0). Moreover, calcined at 500∘C, hierarchical porous [Formula: see text]-Fe2O3 has a fast response recovery (4/25 s) and low working temperature (210∘C). These excellent gas sensing properties are mainly due to porous structure, large specific surface area, and oxygen vacancies on the surface, which make it a promising material for acetone sensors.

scholarly journals A three-dimensional porous MoS2–PVP aerogel as a highly efficient and recyclable sorbent for oils and organic solvents

2020 ◽  
Vol 1 (4) ◽  
pp. 760-766 ◽  
Author(s):  
Pin Song ◽  
Jun Di ◽  
Haiping Chen ◽  
Sirui Zhao ◽  
Cao Wu ◽  
...  
Keyword(s):  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Three Dimensional ◽  
Low Density ◽  
High Porosity ◽  
Large Specific Surface Area ◽  
Water Separation ◽  
Oil Water Separation ◽  
Oil Water

Three-dimensional (3D) aerogels have attracted more and more attention in oil–water separation, due to their advantages of low density, high porosity, and large specific surface area.

scholarly journals Nanocomposite Materials Based on Electrochemically Synthesized Graphene Polymers: Molecular Architecture Strategies for Sensor Applications

Chemosensors ◽  
2021 ◽  
Vol 9 (6) ◽  
pp. 149
Author(s):  
André Olean-Oliveira ◽  
Gilberto A. Oliveira Brito ◽  
Celso Xavier Cardoso ◽  
Marcos F. S. Teixeira
Keyword(s):  
Conducting Polymers ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Electrochemical Sensors ◽  
Structural Characteristics ◽  
Low Cost ◽  
Large Specific Surface Area ◽  
Molecular Architecture ◽  
Sensor Applications

The use of graphene and its derivatives in the development of electrochemical sensors has been growing in recent decades. Part of this success is due to the excellent characteristics of such materials, such as good electrical and mechanical properties and a large specific surface area. The formation of composites and nanocomposites with these two materials leads to better sensing performance compared to pure graphene and conductive polymers. The increased large specific surface area of the nanocomposites and the synergistic effect between graphene and conducting polymers is responsible for this interesting result. The most widely used methodologies for the synthesis of these materials are still based on chemical routes. However, electrochemical routes have emerged and are gaining space, affording advantages such as low cost and the promising possibility of modulation of the structural characteristics of composites. As a result, application in sensor devices can lead to increased sensitivity and decreased analysis cost. Thus, this review presents the main aspects for the construction of nanomaterials based on graphene oxide and conducting polymers, as well as the recent efforts made to apply this methodology in the development of sensors and biosensors.

Three-dimensional graphene encapsulated hollow CoSe2-SnSe2 nanoboxes for high performance asymmetric supercapacitors

2022 ◽  
Author(s):  
Kainan Li ◽  
Ke Zheng ◽  
Zhifang Zhang ◽  
Kuan Li ◽  
Ziyao Bian ◽  
...  
Keyword(s):  
Electrochemical Performance ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
Active Sites ◽  
Specific Capacity ◽  
Three Dimensional ◽  
Hollow Structure ◽  
Large Specific Surface Area ◽  
Composite Aerogel

Abstract Construction of metal selenides with a large specific surface area and a hollow structure is one of the effective methods to improve the electrochemical performance of supercapacitors. However, the nano-material easily agglomerates due to the lack of support, resulting in the loss of electrochemical performance. Herein, we successfully design a three-dimensional graphene (3DG) encapsulation-protected hollow nanoboxes (CoSe2-SnSe2) composite aerogel (3DG/CoSe2-SnSe2) via a co-precipitation method coupled with self-assembly route, followed by a high temperature selenidation strategy. The obtained aerogel possesses porous 3DG conductive network, large specific surface area and plenty of reactive active sites. It could be used as a flexible and binder-free electrode after a facile mechanical compression process, which provided a high specific capacitance of 460 F g-1 at 0.5 A g-1, good rate capability of 212.7 F g-1 at 10 A g-1, and excellent cycle stability due to the fast electron/ion transfer and electrolyte diffusion. With the as-prepared 3DG/CoSe2-SnSe2 as positive electrodes and the AC (activated carbon) as negative electrodes, an asymmetric supercapacitor (3DG/CoSe2-SnSe2//AC) was fabricated, which delivered a high specific capacity of 38 F g-1 at 1A g-1 and an energy density of 11.89 W h kg-1 at 749.9 W kg-1, as well as a capacitance retention of 91.1% after 3000 cycles. This work provides a new method for preparing electrode material.

Sign in / Sign up

Export Citation Format

Share Document