Facile Production of a Fenton-Like Photocatalyst by Two-Step Calcination with a Broad pH Adaptability

A novel heterogeneous Fenton-like photocatalyst, Fe-doped graphitic carbon nitride (Fe-g-C3N4), was produced by facile two-step calcination method. This Fe–g–C3N4 catalyzed rhodamine B degradation in the presence of H2O2 accompanied with visible light irradiation. transmission electron microscopy(TEM), x-ray diffraction (XRD), FT-IR, x-ray photoelectron spectroscopy (XPS), and photoluminescence fluorescent spectrometer (PL) characterization analysis methods were adopted to evaluate the physicochemical property of samples. It can be observed that the Fe-g-C3N4 exhibited excellent photocatalytic Fenton-like activity at a wide pH range of 3–9, with rhodamine B(RhB) degradation efficiency up to 95.5% after irradiation for 45 min in the presence of 1.0 mM H2O2. Its high activity was ascribed to the formation of Fe–N ligands in the triazine rings that accelerated electron movement driving the Fe(III)/Fe(II) redox cycle, and inhibited photo-generated electron hole re-combinations for continuous generation of reactive oxygen species by reactions between Fe(II) and H2O2. The main active oxygen species were hydroxyl radicals, followed by superoxide radicals and hole electrons. This produced catalyst of Fe–g–C3N4 shows excellent reusability and stability, and can be a promising candidate for decontamination of wastewater.

Download Full-text

Biomass-Derived Activated Carbon as a Catalyst for the Effective Degradation of Rhodamine B dye

Processes ◽

10.3390/pr8080926 ◽

2020 ◽

Vol 8 (8) ◽

pp. 926

Author(s):

Shamim Ahmed Hira ◽

Mohammad Yusuf ◽

Dicky Annas ◽

Hu Shi Hui ◽

Kang Hyun Park

Keyword(s):

Electron Microscopy ◽

Activated Carbon ◽

Rhodamine B ◽

Photoelectron Spectroscopy ◽

High Specific Surface Area ◽

High Porosity ◽

X Ray Diffraction ◽

Experimental Conditions ◽

X Ray ◽

Transmission Electron

Activated carbon (AC) was fabricated from carrot waste using ZnCl2 as the activating agent and calcined at 700 °C for 2 h in a tube furnace. The as-synthesized AC was characterized using Fourier-transform infrared spectroscopy, X-ray diffraction analysis, scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and Brunauer–Emmett–Teller analysis; the results revealed that it exhibited a high specific surface area and high porosity. Moreover, this material displayed superior catalytic activity for the degradation of toxic Rhodamine B (RhB) dye. Rate constant for the degradation of RhB was ascertained at different experimental conditions. Lastly, we used the Arrhenius equation and determined that the activation energy for the decomposition of RhB using AC was approximately 35.9 kJ mol−1, which was very low. Hopefully it will create a great platform for the degradation of other toxic dye in near future.

Download Full-text

Preparation of g-C3N4/MoS2 Composite Material and Its Visible Light Catalytic Performance

10.21203/rs.3.rs-627855/v1 ◽

2021 ◽

Author(s):

Yu Fan ◽

Yan-ning Yang ◽

Chen Ding

Keyword(s):

Electron Microscopy ◽

Photocatalytic Activity ◽

Visible Light ◽

Photoelectron Spectroscopy ◽

Photogenerated Electron ◽

Catalytic Performance ◽

X Ray Diffraction ◽

X Ray ◽

Transmission Electron ◽

Calcination Method

Abstract The g-C3N4 nanosheet was prepared by calcination method, the MoS2 nanosheet was prepared by hydrothermal method. The g-C3N4/MoS2 composites were prepared by ultrasonic composite in anhydrous ethanol. X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), ultraviolet-visible spectroscopy (UV-Vis), and photoluminescence (PL) techniques were used to characterize the materials. The photocatalytic degradation of Rhodamine B (Rh B) by g-C3N4/MoS2 composites with different mass ratios was investigated under visible light. The results show that a small amount of MoS2 combined with g-C3N4 can significantly improve photocatalytic activity. The g-C3N4/MoS2 composite with a mass ratio of 1:8 has the highest photocatalytic activity, and the degradation rate of Rh B increases from 50% to 99.6%. The main reason is that MoS2 and g-C3N4 have a matching band structure. The separation rate of photogenerated electron-hole pairs is enhanced. So the g-C3N4/MoS2 composite can improve the photocatalytic activity. The photocatalytic mechanism was proposed through the active matter capture experiment.

Download Full-text

Study on photocatalytic activity based on different pH values of AgBr/Ag2CO3 heterojunction

International Journal of Materials Research (formerly Zeitschrift fuer Metallkunde) ◽

10.1515/ijmr-2020-1111008 ◽

2020 ◽

Vol 111 (10) ◽

pp. 842-848

Author(s):

Fengfeng Li ◽

Mingxi Zhang ◽

Jin Wang ◽

Yongfeng Cai ◽

Dushao Zhao ◽

...

Keyword(s):

Electron Microscopy ◽

Rhodamine B ◽

Photoelectron Spectroscopy ◽

Precipitation Method ◽

X Ray Diffraction ◽

X Ray ◽

Transmission Electron ◽

Photocatalytic Activities ◽

Co Precipitation ◽

Degradation Degree

Abstract In this work, we fabricate a highly efficient photocatalytic AgBr/Ag2CO3 heterojunction through the co-precipitation method. The obtained samples were characterized by means of X-ray diffraction, scanning electron microscopy, transmission electron microscopy, ultraviolet-visible diffuse reflectance spectra and X-ray photoelectron spectroscopy. The photocatalytic activities of obtained samples can be assessed by visible light (λ ≥ 400 nm) degradation of rhodamine B solution. X-ray diffraction revealed that the crystallinity of the AgBr/Ag2CO3heterojunction was significantly higher than pure AgBr and Ag2CO3. Moreover, the AgBr/ Ag2CO3 heterojunction prepared at pH = 6 has the best photocatalytic performance, it can raise the degradation degree of rhodamine B over 95% at 20 min. Finally, a possible photocatalytic mechanism is discussed.

Download Full-text

Identify the Active Phase of Fe–CN Composites for Oxidation Removal of Rhodamine B with H2O2

Zeitschrift für Physikalische Chemie ◽

10.1515/zpch-2018-1221 ◽

2019 ◽

Vol 233 (7) ◽

pp. 1035-1045

Author(s):

Tingting Diao ◽

Wenyao Wang ◽

Xuelian Xu ◽

Ping Xiao ◽

Duihai Tang ◽

...

Keyword(s):

Rhodamine B ◽

Photoelectron Spectroscopy ◽

Guanidine Hydrochloride ◽

Active Phase ◽

Atomic Emission ◽

Gravimetric Analysis ◽

X Ray Diffraction ◽

X Ray ◽

Transmission Electron ◽

Catalytic Performances

AbstractFe-containing carbon nitrides (Fe–CN) prepared with various CN precursors, including dicyandiamide, melamine, guanidine hydrochloride and urea, were characterized by X-ray diffraction, thermal gravimetric analysis, N2physisorption, transmission electron microscopy, X-ray photoelectron spectroscopy and atomic emission spectrometer measurements, and used as catalysts to catalyze the rhodamine B oxidation with H2O2as oxidant. Characteristic results showed that Fe–CN exhibits different compositions, properties and catalytic performances if different CN precursors are used. The Fe–CN prepared from dicyandiamide contains mainly CN phase and certain amounts of surface Fe2O3phase, exhibits the best activity; while that prepared from urea contains mainly Fe2O3phase and few amounts of CN phase, exhibits the worst activity. Contrasting experiments conducted under light irradiation, with a supported Fe/CN_D catalyst, and that using a washed catalyst, suggested that the surface Fe2O3is the active site of the reaction.

Download Full-text

Activity and Stability of Trypsin Immobilized onto Chitosan Magnetic Nanoparticles

Advances in Materials Science and Engineering ◽

10.1155/2017/1457072 ◽

2017 ◽

Vol 2017 ◽

pp. 1-10

Author(s):

Jun Sun ◽

Bin Xu ◽

Yu Shi ◽

Lin Yang ◽

Hai-le Ma

Keyword(s):

Magnetic Nanoparticles ◽

Photoelectron Spectroscopy ◽

Covalent Immobilization ◽

X Ray Diffraction ◽

X Ray ◽

Transmission Electron ◽

Immobilized Trypsin ◽

Alkaline Conditions ◽

Ph Range ◽

Average Size

The aim of this study was to develop a thermally and operationally stable trypsin through covalent immobilization onto chitosan magnetic nanoparticles (Fe3O4 @CTS). The successful preparation of the Fe3O4 @CTS nanoparticles was verified by Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and transmission electron microscopy (TEM), which indicated that the prepared Fe3O4 @CTS nanoparticles have superparamagnetic properties, with an average size of approximately 17 nm. Then, trypsin was covalently immobilized onto the Fe3O4 @CTS nanoparticles at a high loading capacity (149.25 mg/g). The FTIR data demonstrated that the trypsin had undergone a conformational change compared with free trypsin, and the Michaelis constant (Km) and the maximum hydrolysis reaction rate (Vmax) showed that the trypsin immobilized on the Fe3O4 @CTS had a lower affinity for BAEE and lower activity compared with free trypsin. However, the immobilized trypsin showed higher activity than free trypsin at pH 6.0 and in alkaline conditions and retained more than 84% of its initial activity at 60°C after 8 h incubation. Its excellent performance across a broader pH range and high thermal stability, as well as its effective hydrolysis of bovine serum albumin (BSA) and its reusability, make it more attractive than free trypsin for application in protein digestion.

Download Full-text

α-Cellulose Fibers of Paper-Waste Origin Surface-Modified with Fe3O4 and Thiolated-Chitosan for Efficacious Immobilization of Laccase

Polymers ◽

10.3390/polym13040581 ◽

2021 ◽

Vol 13 (4) ◽

pp. 581

Author(s):

Gajanan S. Ghodake ◽

Surendra K. Shinde ◽

Ganesh D. Saratale ◽

Rijuta G. Saratale ◽

Min Kim ◽

...

Keyword(s):

Enzyme Immobilization ◽

Photoelectron Spectroscopy ◽

Cellulose Fibers ◽

Relative Activity ◽

Significant Activity ◽

X Ray Diffraction ◽

X Ray ◽

Transmission Electron ◽

Laccase Immobilization ◽

Surface Modified

The utilization of waste-paper-biomass for extraction of important α-cellulose biopolymer, and modification of extracted α-cellulose for application in enzyme immobilization can be extremely vital for green circular bio-economy. Thus, in this study, α-cellulose fibers were super-magnetized (Fe3O4), grafted with chitosan (CTNs), and thiol (-SH) modified for laccase immobilization. The developed material was characterized by high-resolution transmission electron microscopy (HR-TEM), HR-TEM energy dispersive X-ray spectroscopy (HR-TEM-EDS), X-ray diffraction (XRD), vibrating sample magnetometer (VSM), X-ray photoelectron spectroscopy (XPS), and Fourier transform infrared spectroscopy (FT-IR) analyses. Laccase immobilized on α-Cellulose-Fe3O4-CTNs (α-Cellulose-Fe3O4-CTNs-Laccase) gave significant activity recovery (99.16%) and laccase loading potential (169.36 mg/g). The α-Cellulose-Fe3O4-CTNs-Laccase displayed excellent stabilities for temperature, pH, and storage time. The α-Cellulose-Fe3O4-CTNs-Laccase applied in repeated cycles shown remarkable consistency of activity retention for 10 cycles. After the 10th cycle, α-Cellulose-Fe3O4-CTNs possessed 80.65% relative activity. Furthermore, α-Cellulose-Fe3O4-CTNs-Laccase shown excellent degradation of pharmaceutical contaminant sulfamethoxazole (SMX). The SMX degradation by α-Cellulose-Fe3O4-CTNs-Laccase was found optimum at incubation time (20 h), pH (3), temperatures (30 °C), and shaking conditions (200 rpm). Finally, α-Cellulose-Fe3O4-CTNs-Laccase gave repeated degradation of SMX. Thus, this study presents a novel, waste-derived, highly capable, and super-magnetic nanocomposite for enzyme immobilization applications.

Download Full-text

Surface Stoichiometry and Depth Profile of Tix-CuyNz Thin Films Deposited by Magnetron Sputtering

Materials ◽

10.3390/ma14123191 ◽

2021 ◽

Vol 14 (12) ◽

pp. 3191

Author(s):

Arun Kumar Mukhopadhyay ◽

Avishek Roy ◽

Gourab Bhattacharjee ◽

Sadhan Chandra Das ◽

Abhijit Majumdar ◽

...

Keyword(s):

Magnetron Sputtering ◽

Photoelectron Spectroscopy ◽

Film Surface ◽

Grazing Incidence ◽

X Ray Diffraction ◽

X Ray ◽

Relative Composition ◽

Transmission Electron ◽

Deposited Film ◽

Deposited Films

We report the surface stoichiometry of Tix-CuyNz thin film as a function of film depth. Films are deposited by high power impulse (HiPIMS) and DC magnetron sputtering (DCMS). The composition of Ti, Cu, and N in the deposited film is investigated by X-ray photoelectron spectroscopy (XPS). At a larger depth, the relative composition of Cu and Ti in the film is increased compared to the surface. The amount of adventitious carbon which is present on the film surface strongly decreases with film depth. Deposited films also contain a significant amount of oxygen whose origin is not fully clear. Grazing incidence X-ray diffraction (GIXD) shows a Cu3N phase on the surface, while transmission electron microscopy (TEM) indicates a polycrystalline structure and the presence of a Ti3CuN phase.

Download Full-text

Synthesis of Ce1−xPdxO2−δ Solid Solution in Molten Nitrate

Catalysts ◽

10.3390/catal10060640 ◽

2020 ◽

Vol 10 (6) ◽

pp. 640

Author(s):

Hideaki Sasaki ◽

Keisuke Sakamoto ◽

Masami Mori ◽

Tatsuaki Sakamoto

Keyword(s):

Electron Microscopy ◽

Solid Solution ◽

Solid Solutions ◽

Photoelectron Spectroscopy ◽

Synthesis Method ◽

X Ray Diffraction ◽

X Ray ◽

Transmission Electron ◽

Co Precipitation ◽

Ionic States

CeO2-based solid solutions in which Pd partially substitutes for Ce attract considerable attention, owing to their high catalytic performances. In this study, the solid solution (Ce1−xPdxO2−δ) with a high Pd content (x ~ 0.2) was synthesized through co-precipitation under oxidative conditions using molten nitrate, and its structure and thermal decomposition were examined. The characteristics of the solid solution, such as the change in a lattice constant, inhibition of sintering, and ionic states, were examined using X-ray diffraction (XRD), scanning electron microscopy–energy-dispersive X-ray spectroscopy (SEM−EDS), transmission electron microscopy (TEM)−EDS, and X-ray photoelectron spectroscopy (XPS). The synthesis method proposed in this study appears suitable for the easy preparation of CeO2 solid solutions with a high Pd content.

Download Full-text

Aluminum Nitride-Silicon Carbide Alloy Crystals Grown on SiC Substrates by Sublimation

MRS Internet Journal of Nitride Semiconductor Research ◽

10.1557/s1092578300000569 ◽

2005 ◽

Vol 10 ◽

Cited By ~ 6

Author(s):

Z. Gu ◽

L. Du ◽

J.H. Edgar ◽

E.A. Payzant ◽

L. Walker ◽

...

Keyword(s):

Electron Microscopy ◽

Photoelectron Spectroscopy ◽

X Ray Diffraction ◽

Original Source ◽

X Ray ◽

Alloy Crystal ◽

Transmission Electron ◽

Crystal Substrate ◽

Vapor Distribution ◽

Uniform Composition

AlN-SiC alloy crystals, with a thickness greater than 500 µm, were grown on 4H- and 6H-SiC substrates from a mixture of AlN and SiC powders by the sublimation-recondensation method at 1860-1990 °C. On-axis SiC substrates produced a rough surface covered with hexagonal grains, while 6H- and 4H- off-axis SiC substrates with different miscut angles (8° or 3.68°) formed a relatively smooth surface with terraces and steps. The substrate misorientation ensured that the AlN-SiC alloy crystals grew two dimensionally as identified by scanning electron microscopy (SEM). X-ray diffraction (XRD) and transmission electron microscopy (TEM) confirmed that the AlN-SiC alloys had the wurtzite structure. Electron probe microanalysis (EPMA) and x-ray photoelectron spectroscopy (XPS) demonstrated that the resultant alloy crystals had non-stoichiometric ratios of Al:N and Si:C and a uniform composition throughout the alloy crystal from the interface to the surface. The composition ratio of Al:Si of the alloy crystals changed with the growth temperature, and differed from the original source composition, which was consistent with the results predicted by thermodynamic calculation of the solid-vapor distribution of each element. XPS detected the bonding between Si-C, Si-N, Si-O for the Si 2p spectra. The dislocation density decreased with the growth, which was lower than 106 cm−2 at the alloy surface, more than two orders of magnitude lower compared to regions close to the crystal/substrate interface, as determined by TEM.

Download Full-text

Synthesis of Three-Dimensional Fe3O4/Graphene Aerogels for the Removal of Arsenic Ions from Water

Journal of Nanomaterials ◽

10.1155/2015/864864 ◽

2015 ◽

Vol 2015 ◽

pp. 1-6 ◽

Cited By ~ 10

Author(s):

Yan Ye ◽

Da Yin ◽

Bin Wang ◽

Qingwen Zhang

Keyword(s):

Electron Microscopy ◽

Photoelectron Spectroscopy ◽

3D Structure ◽

Three Dimensional ◽

X Ray Diffraction ◽

X Ray ◽

Graphene Aerogels ◽

Transmission Electron ◽

Potential Applications ◽

Removal Of Arsenic

We report the synthesis of three-dimensional Fe3O4/graphene aerogels (GAs) and their application for the removal of arsenic (As) ions from water. The morphology and properties of Fe3O4/GAs have been characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, X-ray photoelectron spectroscopy, and superconducting quantum inference device. The 3D nanostructure shows that iron oxide nanoparticles are decorated on graphene with an interconnected network structure. It is found that Fe3O4/GAs own a capacity of As(V) ions adsorption up to 40.048 mg/g due to their remarkable 3D structure and existence of magnetic Fe3O4nanoparticles for separation. The adsorption isotherm matches well with the Langmuir model and kinetic analysis suggests that the adsorption process is pseudo-second-ordered. In addition to the excellent adsorption capability, Fe3O4/GAs can be easily and effectively separated from water, indicating potential applications in water treatment.

Download Full-text