scholarly journals Antibacterial Properties of Plasma-Activated Perfluorinated Substrates with Silver Nanoclusters Deposition

Nanomaterials ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 182
Author(s):  
Petr Slepička ◽  
Silvie Rimpelová ◽  
Nikola Slepičková Kasálková ◽  
Dominik Fajstavr ◽  
Petr Sajdl ◽  
...  
Keyword(s):  
Surface Properties ◽  
Antibacterial Properties ◽  
Argon Plasma ◽  
Antimicrobial Effect ◽  
Silver Nanoclusters ◽  
Plasma Modification ◽  
Material Surface ◽  
Silver Deposition ◽  
Force Microscopy ◽  
Atomic Force

This article is focused on the evaluation of surface properties of polytetrafluoroethylene (PTFE) nanotextile and a tetrafluoroethylene-perfluoro(alkoxy vinyl ether) (PFA) film and their surface activation with argon plasma treatment followed with silver nanoclusters deposition. Samples were subjected to plasma modification for a different time exposure, silver deposition for different time periods, or their combination. As an alternative approach, the foils were coated with poly-L-lactic acid (PLLA) and silver. The following methods were used to study the surface properties of the polymers: goniometry, atomic force microscopy, and X-ray photoelectron microscopy. By combining the aforementioned methods for material surface modification, substrates with antibacterial properties eliminating the growth of Gram-positive and Gram-negative bacteria were prepared. Studies of antimicrobial activity showed that PTFE plasma-modified samples coated with PLLA and deposited with a thin layer of Ag had a strong antimicrobial effect, which was also observed for the PFA material against the bacterial strain of S. aureus. Significant antibacterial effect against S. aureus, Proteus sp. and E. coli has been demonstrated on PTFE nanotextile plasma-treated for 240 s, coated with PLLA, and subsequently sputtered with thin Ag layer.

Preparation of Polymer Nanocomposites with Enhanced Antimicrobial Properties

2012 ◽  
Vol 1479 ◽  
pp. 57-62 ◽  
Author(s):  
Beatriz L. España-Sánchez ◽  
Carlos A. Ávila-Orta ◽  
Maria G. Neira-Velázquez ◽  
Silvia G. Solís-Rosales ◽  
Pablo González -Morones
Keyword(s):  
Silver Nanoparticles ◽  
Antibacterial Properties ◽  
Antimicrobial Properties ◽  
Argon Plasma ◽  
Surface Activation ◽  
Force Microscopy ◽  
Ion Collisions ◽  
Atomic Force ◽  
Uniform Dispersion ◽  
Dispersion Of Nanoparticles

ABSTRACTPlasma surface activation and antibacterial properties of nanocomposites of polypropylene/silver nanoparticles (PP/nAg) and nylon-6/silver nanoparticles (Ny6/nAg) were investigated. The nanocomposites were prepared by melt blending assisted by ultrasound, while surface activation was achieved by means of argon plasma. To evaluate the antimicrobial properties of the nanocomposites, pathogen microorganisms such as Pseudomonas aeruginosa and Aspergillus niger were tested. Scanning Electron Microscopy (SEM) analyses showed a uniform dispersion of nanoparticles within the polymer matrix, though the presence of some agglomerates was also appreciated. On the other hand, surface topography by Atomic Force Microscopy (AFM) suggested that ions from the argon plasma generated ion collisions with the surface of the nanocomposites removing or etching polymer from surface and improving silver nanoparticles exposure, increasing their antimicrobial properties as corroborated by antimicrobial analyses. Nanocomposites exposed to argon plasma presented higher antimicrobial properties than the ones not exposed. These results indicated that plasma treatment increased the contact area of the nanoparticles with the microorganisms and enhanced the antimicrobial properties of nanocomposites. The results also showed that PP/nAg nanocomposites presented higher bacterial inhibition than Ny6/nAg nanocomposites, indicating that the chemical structure of the polymer also plays a big role in the final performance of the composite.

scholarly journals The Physicochemical and Antibacterial Properties of Chitosan-Based Materials Modified with Phenolic Acids Irradiated by UVC Light

2021 ◽  
Vol 22 (12) ◽  
pp. 6472
Author(s):  
Beata Kaczmarek-Szczepańska ◽  
Marcin Wekwejt ◽  
Olha Mazur ◽  
Lidia Zasada ◽  
Anna Pałubicka ◽  
...  
Keyword(s):  
Thin Films ◽  
Antimicrobial Activity ◽  
Ferulic Acid ◽  
Phenolic Acid ◽  
Food Packaging ◽  
Antibacterial Properties ◽  
Force Microscopy ◽  
Atomic Force ◽  
Before And After

This paper concerns the physicochemical properties of chitosan/phenolic acid thin films irradiated by ultraviolet radiation with wavelengths between 200 and 290 nm (UVC) light. We investigated the preparation and characterization of thin films based on chitosan (CTS) with tannic (TA), caffeic (CA) and ferulic acid (FA) addition as potential food-packaging materials. Such materials were then exposed to the UVC light (254 nm) for 1 and 2 h to perform the sterilization process. Different properties of thin films before and after irradiation were determined by various methods such as Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), atomic force microscopy (AFM), differential scanning calorimeter (DSC), mechanical properties and by the surface free energy determination. Moreover, the antimicrobial activity of the films and their potential to reduce the risk of contamination was assessed. The results showed that the phenolic acid improving properties of chitosan-based films, short UVC radiation may be used as sterilization method for those films, and also that the addition of ferulic acid obtains effective antimicrobial activity, which have great benefit for food packing applications.

scholarly journals An investigation of surface properties, local elastic modulus and interaction with simulated pulmonary surfactant of surface modified inhalable voriconazole dry powders using atomic force microscopy

RSC Advances ◽  
2016 ◽  
Vol 6 (31) ◽  
pp. 25789-25798 ◽  
Author(s):  
Sumit Arora ◽  
Michael Kappl ◽  
Mehra Haghi ◽  
Paul M. Young ◽  
Daniela Traini ◽  
...  
Keyword(s):  
Atomic Force Microscopy ◽  
Elastic Modulus ◽  
Surface Properties ◽  
Pulmonary Surfactant ◽  
Dry Powders ◽  
Force Microscopy ◽  
Atomic Force ◽  
Surface Modified ◽  
Spray Dried

l-Leucine modified voriconazole spray dried micropartcles.

scholarly journals Surface Properties of Alginate/Chitosan Biofilm for Wound Healing Application

2020 ◽  
Vol 1010 ◽  
pp. 602-607
Author(s):  
Maizlinda Izwana Idris ◽  
Mohammed Firdaus Adzhari ◽  
Siti Natrah Abdul Bakil ◽  
Tee Chuan Lee ◽  
Mohamad Ali Selimin ◽  
...  
Keyword(s):  
Contact Angle ◽  
Wound Healing ◽  
Surface Properties ◽  
Healing Process ◽  
Contact Angle Measurement ◽  
Angle Measurement ◽  
Force Microscopy ◽  
Good Surface ◽  
Atomic Force ◽  
Biopolymer Film

This work focuses on the fabrication of film based on natural biopolymers for wound healing application. Alginate and chitosan were choosen because of their oustanding properties such as biocompatible, hydrophilic and non-toxic. Earlier, the biopolymer film was fabricated by using alginate 1% wt and chitosan 1% wt. solutions at volume ratios of 99:1 and 97:3. Next, the biopolymer film solution was cross-linked with 1M CaCl2.2H2O for two hours and later dried for 24 hours at room temperature. Then, the surface properties of the prepared biopolymer films were characterised via Field Emission Scanning Electron Microscopy (FESEM), Atomic Force Microscopy (AFM) and contact angle measurement. It was observed that the surface of the biopolymer film became rougher as the volume of the chitosan increases. This condition was confirmed with average surface roughness, RA for biopolymer film with ratio of 97:3 resulted in higher values. Also it was found that the surface of biopolymer films were hydrophilic after the contact angle was less than 90°. This can be concluded that the biopolymer based on alginate/chitosan is a promising candidate for wound healing materials particularly with good surface properties for faster healing process at the wound areas.

Characterization of Electron-Beam-Induced Silver Deposition from Liquid Phase

2012 ◽  
Vol 1371 ◽  
Author(s):  
Jonathan J. Park ◽  
Alexandra Joshi-Imre ◽  
Leonidas E. Ocola ◽  
Ralu Divan
Keyword(s):  
Electron Beam ◽  
Liquid Phase ◽  
Gas Phase ◽  
Electron Trajectory ◽  
Silver Deposition ◽  
Force Microscopy ◽  
Atomic Force ◽  
Dual Beam ◽  
Phase Precursor ◽  
Precursor Molecules

ABSTRACTElectron-beam-induced deposition (EBID) using gas-phase precursor molecules is an extensively studied fabrication technique. Liquid-phase metal deposition has recently been shown to achieve higher purity levels than traditional gas-phase deposition [1]. The goal of this investigation was to characterize liquid-phase silver deposition for further studies in photonics. A Scanning Electron Microscope (SEM) (FEI Nova 600 NanoLab Dual Beam) was used to deposit silver on polyimide membranes from aqueous AgNO3 solution by accelerating electrons into the solution for silver ion reduction. Atomic Force Microscopy (AFM) and SEM were subsequently used to characterize the size dependence to electron dosage. We observed granular silver deposits with sub-75 nm particle size and 200-250 nm total aggregate diameters. The CASINO (monte CArlo SImulation of electroN trajectory in sOlids) program was used to model electron trajectory in the solution to relate the size to the electron spread.

Sign in / Sign up

Export Citation Format

Share Document