scholarly journals Organotrialkoxysilane-Functionalized Prussian Blue Nanoparticles-Mediated Fluorescence Sensing of Arsenic(III)

Nanomaterials ◽  
2021 ◽  
Vol 11 (5) ◽  
pp. 1145
Author(s):  
Prem. C. Pandey ◽  
Shubhangi Shukla ◽  
Roger J. Narayan
Keyword(s):  
Prussian Blue ◽  
Chemical Reduction ◽  
Low Cost ◽  
Three Dimensional ◽  
Heterogeneous Systems ◽  
Lattice Points ◽  
Radiative Energy ◽  
Fluorescence Sensing ◽  
Emission Signal ◽  
Prussian Blue Nanoparticles

Prussian blue nanoparticles (PBN) exhibit selective fluorescence quenching behavior with heavy metal ions; in addition, they possess characteristic oxidant properties both for liquid–liquid and liquid–solid interface catalysis. Here, we propose to study the detection and efficient removal of toxic arsenic(III) species by materializing these dual functions of PBN. A sophisticated PBN-sensitized fluorometric switching system for dosage-dependent detection of As3+ along with PBN-integrated SiO2 platforms as a column adsorbent for biphasic oxidation and elimination of As3+ have been developed. Colloidal PBN were obtained by a facile two-step process involving chemical reduction in the presence of 2-(3,4-epoxycyclohexyl)ethyl trimethoxysilane (EETMSi) and cyclohexanone as reducing agents, while heterogeneous systems were formulated via EETMSi, which triggered in situ growth of PBN inside the three-dimensional framework of silica gel and silica nanoparticles (SiO2). PBN-induced quenching of the emission signal was recorded with an As3+ concentration (0.05–1.6 ppm)-dependent fluorometric titration system, owing to the potential excitation window of PBN (at 480–500 nm), which ultimately restricts the radiative energy transfer. The detection limit for this arrangement is estimated around 0.025 ppm. Furthermore, the mesoporous and macroporous PBN-integrated SiO2 arrangements might act as stationary phase in chromatographic studies to significantly remove As3+. Besides physisorption, significant electron exchange between Fe3+/Fe2+ lattice points and As3+ ions enable complete conversion to less toxic As5+ ions with the repeated influx of mobile phase. PBN-integrated SiO2 matrices were successfully restored after segregating the target ions. This study indicates that PBN and PBN-integrated SiO2 platforms may enable straightforward and low-cost removal of arsenic from contaminated water.

Supercapacitance Property Study of 3D Open-Framework Prussian Blue in Neutral Electrolyte

2021 ◽  
Vol 13 (3) ◽  
pp. 436-446
Author(s):  
Wei Pan ◽  
Mu Zhang ◽  
Dongfeng Xue ◽  
Xudong Sun
Keyword(s):  
Electrochemical Properties ◽  
Prussian Blue ◽  
Electrode Materials ◽  
Low Cost ◽  
Three Dimensional ◽  
Particle Morphology ◽  
Precipitation Method ◽  
Dimensional Structure ◽  
Sem Image ◽  
One Step

Prussian blue is a kind compound with a consistent three-dimensional structure. Here we characterized a family of Prussian blue which could have reversible insertion of cations into materials. This study details comprehensive electrochemical property information about Prussian blue electrode materials and provides a method to evaluate a series of supercapacitor materials. These hexacyanoferrates were synthesized by one step precipitation method which was low cost. They exhibited extremely different apparent morphology in the scanning electron microscope (SEM) image. And then these Prussian blue electrode materials were evaluated on room temperature for their electrochemical properties. They show a different specific capacitance and redox voltage. The kinetic study reveals reasons that influence the electrochemical properties of these active materials. First, the particle morphology has a great effect on it; Second, transition metal cations modify the C≡N bond connected with it and then influence the bond connected with the Fe atom.

Prussian Blue Modified Ferritin Nanoparticles as Peroxidase and Catalase Mimetics and their Application in Glucose Detection

2013 ◽  
Vol 562-565 ◽  
pp. 1333-1339 ◽  
Author(s):  
Wei Zhang ◽  
Yu Zhang ◽  
Ning Gu
Keyword(s):  
Catalytic Activity ◽  
Prussian Blue ◽  
Ferric Iron ◽  
Three Dimensional ◽  
High Catalytic Activity ◽  
Glucose Detection ◽  
Biological Functions ◽  
Nanoscale Structures ◽  
Prussian Blue Nanoparticles ◽  
Iron Oxide Core

Prussian blue nanoparticles (PBNPs) have been certified a kind of mimetic enzyme possesses the advantages of stability, high catalytic activity and low prices. Ferritins are natural nanoscale structures with unique three-dimensional structures and biological functions. In this context, we synthesized PBNPs on the surface of the iron oxide core of ferritin taking use of the ferric iron of the core, we also intended to retain the specificity of ferritin for some biological use. Our results show the resulting nanostructures (Prussian blue-ferritin nanoparticles, PB-Ft NPs) got very small size and relatively high catalytic activity , furthermore, PB-Ft NPs successfully combined the intrinsic enzyme mimetic activity of PBNPs and the specificity to tumor cells of ferritin. The peroxidase-like activity and catalase-like activity of PB-Ft NPs were studied. Peroxidase-like activity which fits well the Michaelis-Menten kinetics was found strongly depending on pH, temperature and the concentration of PB-Ft NPs. Then a sensitive method for glucose detection was developed using glucose oxidase (GOx) and PB-Ft NPs. PB-Ft NPs displayed catalase-like activity in PH higher than 5.0, the generated oxygen was measured by the dissolved oxygen electrode.Enzyme-linked immunosorbent assay (ELISA) shows PB-Ft NPs possess both specificity and peroxidase-like activity.

High-crystallinity and high-rate Prussian blue analogues synthesized at oil-water interface

2020 ◽  
Author(s):  
Ceheng Duan ◽  
Yan Meng ◽  
Yujue Wang ◽  
Zhaokun Zhang ◽  
Yunchen Ge ◽  
...  
Keyword(s):  
Prussian Blue ◽  
Low Cost ◽  
Three Dimensional ◽  
Sodium Ion ◽  
High Rate ◽  
Dimensional Structure ◽  
Sodium Ion Batteries ◽  
Practical Application ◽  
Prussian Blue Analogues ◽  
Oil Water

Prussian blue and its analogues are considered to be cathode materials for practical application in sodium-ion batteries due to their open three-dimensional structure and low cost. However, PBAs synthesized by...

scholarly journals Potassium Prussian Blue Nanoparticles: A Low-Cost Cathode Material for Potassium-Ion Batteries

2016 ◽  
Vol 27 (4) ◽  
pp. 1604307 ◽  
Author(s):  
Chenglin Zhang ◽  
Yang Xu ◽  
Min Zhou ◽  
Liying Liang ◽  
Huishuang Dong ◽  
...  
Keyword(s):  
Cathode Material ◽  
Prussian Blue ◽  
Low Cost ◽  
Potassium Ion ◽  
Prussian Blue Nanoparticles

Fabrication of 3D Temperature Sensor Using Magnetostrictive Inkjet Printhead

2020 ◽  
Vol 64 (5) ◽  
pp. 50405-1-50405-5
Author(s):  
Young-Woo Park ◽  
Myounggyu Noh
Keyword(s):  
Flexible Electronics ◽  
Inkjet Printing ◽  
Temperature Sensor ◽  
Computer Aided Design ◽  
Low Cost ◽  
Three Dimensional ◽  
Drop On Demand ◽  
Aided Design ◽  
Nanoparticle Ink ◽  
Inkjet Printhead

Abstract Recently, the three-dimensional (3D) printing technique has attracted much attention for creating objects of arbitrary shape and manufacturing. For the first time, in this work, we present the fabrication of an inkjet printed low-cost 3D temperature sensor on a 3D-shaped thermoplastic substrate suitable for packaging, flexible electronics, and other printed applications. The design, fabrication, and testing of a 3D printed temperature sensor are presented. The sensor pattern is designed using a computer-aided design program and fabricated by drop-on-demand inkjet printing using a magnetostrictive inkjet printhead at room temperature. The sensor pattern is printed using commercially available conductive silver nanoparticle ink. A moving speed of 90 mm/min is chosen to print the sensor pattern. The inkjet printed temperature sensor is demonstrated, and it is characterized by good electrical properties, exhibiting good sensitivity and linearity. The results indicate that 3D inkjet printing technology may have great potential for applications in sensor fabrication.

Constructive Optimisation of the Propeller Type Mixing Devices Using the Virtual and Rapid Prototyping

2017 ◽  
Vol 68 (3) ◽  
pp. 453-458 ◽  
Author(s):  
Daniel Besnea ◽  
Alina Spanu ◽  
Iuliana Marlena Prodea ◽  
Gheorghita Tomescu ◽  
Iolanda Constanta Panait
Keyword(s):  
Rapid Prototyping ◽  
Low Cost ◽  
Scale Up ◽  
Three Dimensional ◽  
Rapid Identification ◽  
Multidisciplinary Optimization ◽  
External Diameter ◽  
Process Industries ◽  
Parametric Cad ◽  
Shaft Torque

The paper points out the advantages of rapid prototyping for improving the performances/constructive optimization of mixing devices used in process industries, here exemplified to propeller types ones. The multidisciplinary optimization of the propeller profile affords its design using parametric CAD methods. Starting from the mathematical curve equations proposed for the blade profile, it was determined its three-dimensional virtual model. The challenge has been focused on the variation of propeller pitch and external diameter. Three dimensional ranges were manufactured using the additive manufacturing process with Marker Boot 3D printer. The mixing performances were tested on the mixing equipment measuring the minimum rotational speed and the correspondent shaft torque for complete suspension achieved for each of the three models. The virtual and rapid prototyping method is newly proposed by the authors to obtain the basic data for scale up of the mixing systems, in the case of flexible production (of low quantities), in which both the nature and concentration of the constituents in the final product varies often. It is an efficient and low cost method for the rapid identification of the optimal mixing device configuration, which contributes to the costs reduction and to the growing of the output.

scholarly journals Facile Synthesis of Carboxymethyl Cellulose Coated Core/Shell SiO2@Cu Nanoparticles and Their Antifungal Activity against Phytophthora capsici

Polymers ◽  
2021 ◽  
Vol 13 (6) ◽  
pp. 888
Author(s):  
Nguyen Thi Thanh Hai ◽  
Nguyen Duc Cuong ◽  
Nguyen Tran Quyen ◽  
Nguyen Quoc Hien ◽  
Tran Thi Dieu Hien ◽  
...  
Keyword(s):  
Antifungal Activity ◽  
Carboxymethyl Cellulose ◽  
Chemical Reduction ◽  
Low Cost ◽  
Phytophthora Capsici ◽  
Reduction Process ◽  
Spherical Shape ◽  
Core Shell ◽  
Cu Nanoparticles ◽  
Average Size

Cu nanoparticles are a potential material for creating novel alternative antimicrobial products due to their unique antibacterial/antifungal properties, stability, dispersion, low cost and abundance as well as being economical and ecofriendly. In this work, carboxymethyl cellulose coated core/shell SiO2@Cu nanoparticles (NPs) were synthesized by a simple and effective chemical reduction process. The initial SiO2 NPs, which were prepared from rice husk ash, were coated by a copper ultrathin film using hydrazine and carboxymethyl cellulose (CMC) as reducing agent and stable agent, respectively. The core/shell SiO2@Cu nanoparticles with an average size of ~19 nm were surrounded by CMC. The results indicated that the SiO2@Cu@CMC suspension was a homogenous morphology with a spherical shape, regular dispersion and good stability. Furthermore, the multicomponent SiO2@Cu@CMC NPs showed good antifungal activity against Phytophthora capsici (P. capsici). The novel Cu NPs-based multicomponent suspension is a key compound in the development of new fungicides for the control of the Phytophthora disease.

scholarly journals An “Animated Spatial Time Machine” in Co-Creation: Reconstructing History Using Gamification Integrated into 3D City Modelling, 4D Web and Transmedia Storytelling

2021 ◽  
Vol 10 (7) ◽  
pp. 460
Author(s):  
Mario Matthys ◽  
Laure De Cock ◽  
John Vermaut ◽  
Nico Van de Weghe ◽  
Philippe De Maeyer
Keyword(s):  
Public Space ◽  
Low Cost ◽  
Three Dimensional ◽  
Physical Situation ◽  
Time Machine ◽  
Transmedia Storytelling ◽  
Spatial Reconstruction ◽  
3D Software ◽  
The City ◽  
City Models

More and more digital 3D city models might evolve into spatiotemporal instruments with time as the 4th dimension. For digitizing the current situation, 3D scanning and photography are suitable tools. The spatial future could be integrated using 3D drawings by public space designers and architects. The digital spatial reconstruction of lost historical environments is more complex, expensive and rarely done. Three-dimensional co-creative digital drawing with citizens’ collaboration could be a solution. In 2016, the City of Ghent (Belgium) launched the “3D city game Ghent” project with time as one of the topics, focusing on the reconstruction of disappeared environments. Ghent inhabitants modelled in open-source 3D software and added animated 3D gamification and Transmedia Storytelling, resulting in a 4D web environment and VR/AR/XR applications. This study analyses this low-cost interdisciplinary 3D co-creative process and offers a framework to enable other cities and municipalities to realise a parallel virtual universe (an animated digital twin bringing the past to life). The result of this co-creation is the start of an “Animated Spatial Time Machine” (AniSTMa), a term that was, to the best of our knowledge, never used before. This research ultimately introduces a conceptual 4D space–time diagram with a relation between the current physical situation and a growing number of 3D animated models over time.

Sign in / Sign up

Export Citation Format

Share Document