scholarly journals Temperature-Dependent Superplasticity and Strengthening in CoNiCrFeMn High Entropy Alloy Nanowires Using Atomistic Simulations

Nanomaterials ◽  
2021 ◽  
Vol 11 (8) ◽  
pp. 2111
Author(s):  
Pawan Kumar Tripathi ◽  
Yu-Chen Chiu ◽  
Somnath Bhowmick ◽  
Yu-Chieh Lo
Keyword(s):  
Mechanical Properties ◽  
Cross Section ◽  
Partial Dislocation ◽  
Semiconductor Industry ◽  
Apparent Temperature ◽  
High Entropy Alloy ◽  
Single Element ◽  
Temperature Dependent ◽  
High Entropy ◽  
Ag Nanowires

High strength and ductility, often mutually exclusive properties of a structural material, are also responsible for damage tolerance. At low temperatures, due to high surface energy, single element metallic nanowires such as Ag usually transform into a more preferred phase via nucleation and propagation of partial dislocation through the nanowire, enabling superplasticity. In high entropy alloy (HEA) CoNiCrFeMn nanowires, the motion of the partial dislocation is hindered by the friction due to difference in the lattice parameter of the constituent atoms which is responsible for the hardening and lowering the ductility. In this study, we have examined the temperature-dependent superplasticity of single component Ag and multicomponent CoNiCrFeMn HEA nanowires using molecular dynamics simulations. The results demonstrate that Ag nanowires exhibit apparent temperature-dependent superplasticity at cryogenic temperature due to (110) to (100) cross-section reorientation behavior. Interestingly, HEA nanowires can perform exceptional strength-ductility trade-offs at cryogenic temperatures. Even at high temperatures, HEA nanowires can still maintain good flow stress and ductility prior to failure. Mechanical properties of HEA nanowires are better than Ag nanowires due to synergistic interactions of deformation twinning, FCC-HCP phase transformation, and the special reorientation of the cross-section. Further examination reveals that simultaneous activation of twining induced plasticity and transformation induced plasticity are responsible for the plasticity at different stages and temperatures. These findings could be very useful for designing nanowires at different temperatures with high stability and superior mechanical properties in the semiconductor industry.

scholarly journals Superior Temperature-Dependent Mechanical Properties and Deformation Behavior of Equiatomic CoCrFeMnNi High-Entropy Alloy Additively Manufactured by Selective Laser Melting

2020 ◽  
Vol 10 (1) ◽  
Author(s):  
Young-Kyun Kim ◽  
Sangsun Yang ◽  
Kee-Ahn Lee
Keyword(s):  
Mechanical Properties ◽  
Dislocation Density ◽  
Selective Laser Melting ◽  
High Dislocation Density ◽  
Deformation Mechanisms ◽  
High Entropy Alloy ◽  
Temperature Dependent ◽  
Laser Melting ◽  
High Entropy ◽  
Main Deformation

Abstract The microstructure, temperature-dependent mechanical properties and deformation behaviors of equiatomic CoCrFeMnNi high-entropy alloy (HEA) additively manufactured by selective laser melting (SLM) were investigated. SLM-built HEA had a face-centered cubic (FCC) single-phase random solid solution. In addition, SLM-built HEA was composed of epitaxial growth grains, dislocation network and nano-sized oxides. Room- and high-temperature compression tests confirmed that SLM-built HEA has outstanding mechanical properties in all temperature ranges compared to equiatomic CoCrFeMnNi HEAs reported up to the present. The excellent mechanical properties of SLM-built HEA were achieved with fine grains, high dislocation density and fine precipitates at low temperatures (25 °C to 600 °C), and by high dislocation density and fine precipitates at high temperatures (700 °C or higher). On the other hand, the deformation microstructure showed that slip and deformation twins are the main deformation mechanisms from 25 °C to 600 °C, and slip and partial recrystallization are the main deformation mechanisms above 700 °C. Based on the above findings, this study also discusses correlations among the microstructure, superior mechanical properties and deformation mechanisms of SLM-built equiatomic CoCrFeMnNi HEA.

Study on Wear Resistance FeNiCrMnAl High Entropy Alloy - Mechanical Properties

2017 ◽  
Vol 750 ◽  
pp. 34-38
Author(s):  
Gheorghe Buluc ◽  
Romeu Chelariu ◽  
Gabriela Popescu ◽  
Mihail Sârghi ◽  
Ioan Carcea
Keyword(s):  
Mechanical Properties ◽  
Wear Resistance ◽  
Molar Fraction ◽  
High Entropy Alloy ◽  
Single Element ◽  
Test Machine ◽  
High Entropy Alloys ◽  
Metallic Elements ◽  
High Entropy ◽  
Sliding Test

Traditional alloys is based on a single element called matrix and to improve some mechanical properties (strength, ductility, strength) are added and other metallic elements in the system. High entropy alloys have become a field of increasingly explored in the world of materials. Excellent mechanical properties obtained of the high entropy alloys recommend them to be from year to year as investigated. In the last decade more than 500 high entropy alloys journal and conference papers have been published [1]. High entropy alloys are alloys who have in their composition 5 to 13 metal elements and the concentration of each component is between 5% and 35%. These elements in the composition of high entropy alloys are divided into elements of minority and majority elements. They are called minority elements because their molar fraction is less than 5%. High entropy alloys have mixing entropy higher than traditional alloys, ΔScons≥1.61R (R = 8.314 J / (mol • K)) [1]. High entropy alloy have been obtained in the laboratory of Science and Materials Engineering faculty from Iasi using a medium frequency induction furnace with 8000 Hz. Because they have excellent mechanical properties high entropy alloys can be used in various fields with high wear and corrosion degree or electronic, magnetic applications [1]. In this work we selected pure metallic elements like: Fe, Ni, Cr, Mn and Al. The quantity of alloy developed varied between 0.5 and 1.5 kg. Metal load necessary for the preparation of metal alloys were formed technical grade, industrial accessible prices and satisfying. Friction and wear rezistance were studies by using a reciprocating sliding test machine , in a pin on disk configuration, using aluminum as counter face.In this paper it investigated the wear resistance of high entropy alloys obtained, microstructure and their mechanical properties.

scholarly journals Nanoporous Quasi-High-Entropy Alloy Microspheres

Metals ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 345 ◽  
Author(s):  
Lianzan Yang ◽  
Yongyan Li ◽  
Zhifeng Wang ◽  
Weimin Zhao ◽  
Chunling Qin
Keyword(s):  
Mechanical Properties ◽  
Solid Solution ◽  
Specific Surface ◽  
Surface Area ◽  
Specific Surface Area ◽  
High Specific Surface Area ◽  
High Entropy Alloy ◽  
Face Centered Cubic ◽  
High Entropy ◽  
Hierarchical Porous

High-entropy alloys (HEAs) present excellent mechanical properties. However, the exploitation of chemical properties of HEAs is far less than that of mechanical properties, which is mainly limited by the low specific surface area of HEAs synthesized by traditional methods. Thus, it is vital to develop new routes to fabricate HEAs with novel three-dimensional structures and a high specific surface area. Herein, we develop a facile approach to fabricate nanoporous noble metal quasi-HEA microspheres by melt-spinning and dealloying. The as-obtained nanoporous Cu30Au23Pt22Pd25 quasi-HEA microspheres present a hierarchical porous structure with a high specific surface area of 69.5 m2/g and a multiphase approximatively componential solid solution characteristic with a broad single-group face-centered cubic XRD pattern, which is different from the traditional single-phase or two-phase solid solution HEAs. To differentiate, these are named quasi-HEAs. The synthetic strategy proposed in this paper opens the door for the synthesis of porous quasi-HEAs related materials, and is expected to promote further applications of quasi-HEAs in various chemical fields.

scholarly journals Tribological and Mechanical Properties of Multicomponent CrVTiNbZr(N) Coatings

Coatings ◽  
2021 ◽  
Vol 11 (1) ◽  
pp. 41
Author(s):  
Yin-Yu Chang ◽  
Cheng-Hsi Chung
Keyword(s):  
Mechanical Properties ◽  
Nitrogen Content ◽  
Adhesion Strength ◽  
Mechanical Performance ◽  
Bulk Material ◽  
High Entropy Alloy ◽  
Composition Gradient ◽  
Multilayered Structures ◽  
High Entropy ◽  
Alloy Target

Multi-element material coating systems have received much attention for improving the mechanical performance in industry. However, they are still focused on ternary systems and seldom beyond quaternary ones. High entropy alloy (HEA) bulk material and thin films are systems that are each comprised of at least five principal metal elements in equally matched proportions, and some of them are found possessing much higher strength than traditional alloys. In this study, CrVTiNbZr high entropy alloy and nitrogen contained CrVTiNbZr(N) nitride coatings were synthesized using high ionization cathodic-arc deposition. A chromium-vanadium alloy target, a titanium-niobium alloy target and a pure zirconium target were used for the deposition. By controlling the nitrogen content and cathode current, the CrNbTiVZr(N) coating with gradient or multilayered composition control possessed different microstructures and mechanical properties. The effect of the nitrogen content on the chemical composition, microstructure and mechanical properties of the CrVTiNbZr(N) coatings was investigated. Compact columnar microstructure was obtained for the synthesized CrVTiNbZr(N) coatings. The CrVTiNbZrN coating (HEAN-N165), which was deposited with nitrogen flow rate of 165 standard cubic centimeters per minute (sccm), exhibited slightly blurred columnar and multilayered structures containing CrVN, TiNbN and ZrN. The design of multilayered CrVTiNbZrN coatings showed good adhesion strength. Improvement of adhesion strength was obtained with composition-gradient interlayers. The CrVTiNbZrN coating with nitrogen content higher than 50 at.% possessed the highest hardness (25.2 GPa) and the resistance to plastic deformation H3/E*2 (0.2 GPa) value, and therefore the lowest wear rate was obtained because of high abrasion wear resistance.

Mechanical properties and microstructure of the Al0.3CoCrFeNiTi0.3 high entropy alloy under dynamic compression

2021 ◽  
Vol 812 ◽  
pp. 141147
Author(s):  
Xianzhe Zhong ◽  
Qingming Zhang ◽  
Jing Xie ◽  
Mingze Wu ◽  
Fuqing Jiang ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Dynamic Compression ◽  
High Entropy Alloy ◽  
High Entropy
Sign in / Sign up

Export Citation Format

Share Document