scholarly journals One-Pot Synthesis of BiCuSO Nanosheets under Ambient Atmosphere as Broadband Spectrum Photocatalyst

Nanomaterials ◽  
2019 ◽  
Vol 9 (4) ◽  
pp. 540 ◽  
Author(s):  
Huanchun Wang ◽  
Junping Ding ◽  
Haomin Xu ◽  
Lina Qiao ◽  
Xuanjun Wang ◽  
...  
Keyword(s):  
Organic Contaminants ◽  
Large Scale ◽  
Near Infrared ◽  
High Vacuum ◽  
Alkali Concentration ◽  
Ambient Atmosphere ◽  
One Pot ◽  
Broadband Spectrum ◽  
Extreme High Temperature ◽  
Potential Applications

Cuprous based chalcogenides have attracted intensive research interest due to the potential applications in solar energy conversion. However, typical fabrications of these compounds are often carried out under severe conditions, such as inert gas protection, high vacuum, and/or extreme high temperature. Here we reported a one-pot process for cuprous based chalcogenides synthesis in aqueous solution. A strategy for BiCuSO nanosheets fabrication without toxic chemicals or rigorous reagents at pretty low temperatures under an ambient atmosphere was established, with the practicality of morphology controlling and the compatibility of multifarious precursors. Platelike BiCuSO with a thickness range from several to hundreds nanometers are fabricated by adjusting the alkali concentration, reaction time, and temperature. The positive effect of alkali hydroxide concentration is proposed cautiously based on the experimental results. The photocatalytic activities of BiCuSO nanosheet under UV, visible, and near-infrared irradiation were also investigated. BiCuSO obtained at room temperature with a thickness of 4.5 nm showed the most impressive efficiency to decompose organic contaminants. Our research presented a new way for cuprous sulfides fabrication, and might open up a new vista for large-scale synthesis of cuprous based materials as promising broadband spectrum light-absorbing materials.

One-pot synthesis of dumbbell shaped PbS–Te hybrids with promising photothermal properties

2020 ◽  
Vol 98 (12) ◽  
pp. 799-805
Author(s):  
Aili Liu ◽  
Xinnan Mao ◽  
Zhoumin Xiao ◽  
Huile Jin ◽  
Liyun Chen ◽  
...  
Keyword(s):  
Optical Absorption ◽  
Near Infrared ◽  
One Pot ◽  
Medical Treatments ◽  
Microwave Assisted ◽  
One Pot Synthesis ◽  
Diethyl Dithiocarbamate ◽  
Potential Applications ◽  
Assisted Decomposition ◽  
Dimethyl Dithiocarbamate

The development of multi-component photothermal agents has attracted increasing attention due to their potential applications in energy conversion, medical treatments, etc. Herein, a dumbbell shaped PbS–Te heterostructure was prepared via a one-pot microwave-assisted decomposition of lead dimethyl dithiocarbamate and tellurium diethyl dithiocarbamate. The as-obtained PbS–Te hybrids exhibit excellent photothermal stability and strong optical absorption over a broad wavelength range spanning from ultraviolet to near-infrared, where the photothermal conversion efficiency could reach as high as 12.1%. Such promising photothermal performance demonstrates the advantages of one-pot synthesis that results in more intimate contacts among individual components.

An in situ and ex situ TEM study of the formation of thin cobalt silicide films by molecular beam epitaxy on the silicon (100) surface

1988 ◽  
Vol 46 ◽  
pp. 884-885
Author(s):  
D. Loretto ◽  
J. M. Gibson ◽  
S. M. Yalisove ◽  
R. T. Tung
Keyword(s):  
Molecular Beam Epitaxy ◽  
Molecular Beam ◽  
Defect Density ◽  
High Vacuum ◽  
Ultra High Vacuum ◽  
Ex Situ ◽  
Metal Base ◽  
In Situ Experiments ◽  
Potential Applications

The cobalt disilicide/silicon system has potential applications as a metal-base and as a permeable-base transistor. Although thin, low defect density, films of CoSi2 on Si(111) have been successfully grown, there are reasons to believe that Si(100)/CoSi2 may be better suited to the transmission of electrons at the silicon/silicide interface than Si(111)/CoSi2. A TEM study of the formation of CoSi2 on Si(100) is therefore being conducted. We have previously reported TEM observations on Si(111)/CoSi2 grown both in situ, in an ultra high vacuum (UHV) TEM and ex situ, in a conventional Molecular Beam Epitaxy system.The procedures used for the MBE growth have been described elsewhere. In situ experiments were performed in a JEOL 200CX electron microscope, extensively modified to give a vacuum of better than 10-9 T in the specimen region and the capacity to do in situ sample heating and deposition. Cobalt was deposited onto clean Si(100) samples by thermal evaporation from cobalt-coated Ta filaments.

An Efficient and Improved Process for the Synthesis of Itopride Hydrochloride and Trimethobenzamide Hydrochloride

2018 ◽  
Vol 15 (4) ◽  
pp. 572-575 ◽  
Author(s):  
Ponnusamy Kannan ◽  
Samuel I.D. Presley ◽  
Pallikondaperumal Shanmugasundaram ◽  
Nagapillai Prakash ◽  
Deivanayagam Easwaramoorthy
Keyword(s):  
Large Scale ◽  
Hydroxylamine Hydrochloride ◽  
Scale Production ◽  
One Pot ◽  
Hydrochloride Salt ◽  
Environmental Friendly ◽  
Large Scale Production ◽  
Non Ulcer Dyspepsia ◽  
Itopride Hydrochloride ◽  
Yield And Purity

Aim and Objective: Itopride is a prokinetic agent used for treating conditions like non-ulcer dyspepsia. Itopride is administered as its hydrochloride salt. Trimethobenzamide is used for treating nausea and vomiting and administered as its hydrochloride salt. The aim is to develop a novel and environmental friendly method for large-scale production of itopride and trimethobenzamide. Materials and Methods: Itopride and trimethobenzamide can be prepared from a common intermediate 4- (dimethylaminoethoxy) benzyl amine. The intermediate is prepared from one pot synthesis using Phyrdroxybenzaldehye and zinc dust and further reaction of the intermediate with substituted methoxy benzoic acid along with boric acid and PEG gives itopride and trimethobenzamide. Results: The intermediate 4-(dimethylaminoethoxy) benzylamine is prepared by treating p-hydroxybenzaldehyde and 2-dimethylaminoethyl chloride. The aldehyde formed is treated with hydroxylamine hydrochloride. The intermediate is confirmed by NMR and the purity is analysed by HPLC. Conclusion: Both itopride and trimethobenzamide were successfully synthesized by this method. The developed method is environmental friendly, economical for large-scale production with good yield and purity.

scholarly journals An optical observational cluster mass function at z ∼ 1 with the ORELSE survey

2021 ◽  
Vol 502 (3) ◽  
pp. 3942-3954
Author(s):  
D Hung ◽  
B C Lemaux ◽  
R R Gal ◽  
A R Tomczak ◽  
L M Lubin ◽  
...  
Keyword(s):  
Monte Carlo ◽  
Large Scale ◽  
Near Infrared ◽  
Function Analysis ◽  
Voronoi Tessellation ◽  
Cosmological Parameters ◽  
Mass Range ◽  
Mass Function ◽  
Cluster Mass ◽  
Theoretical Mass

ABSTRACT We present a new mass function of galaxy clusters and groups using optical/near-infrared (NIR) wavelength spectroscopic and photometric data from the Observations of Redshift Evolution in Large-Scale Environments (ORELSE) survey. At z ∼ 1, cluster mass function studies are rare regardless of wavelength and have never been attempted from an optical/NIR perspective. This work serves as a proof of concept that z ∼ 1 cluster mass functions are achievable without supplemental X-ray or Sunyaev-Zel’dovich data. Measurements of the cluster mass function provide important contraints on cosmological parameters and are complementary to other probes. With ORELSE, a new cluster finding technique based on Voronoi tessellation Monte Carlo (VMC) mapping, and rigorous purity and completeness testing, we have obtained ∼240 galaxy overdensity candidates in the redshift range 0.55 < z < 1.37 at a mass range of 13.6 < log (M/M⊙) < 14.8. This mass range is comparable to existing optical cluster mass function studies for the local universe. Our candidate numbers vary based on the choice of multiple input parameters related to detection and characterization in our cluster finding algorithm, which we incorporated into the mass function analysis through a Monte Carlo scheme. We find cosmological constraints on the matter density, Ωm, and the amplitude of fluctuations, σ8, of $\Omega _{m} = 0.250^{+0.104}_{-0.099}$ and $\sigma _{8} = 1.150^{+0.260}_{-0.163}$. While our Ωm value is close to concordance, our σ8 value is ∼2σ higher because of the inflated observed number densities compared to theoretical mass function models owing to how our survey targeted overdense regions. With Euclid and several other large, unbiased optical surveys on the horizon, VMC mapping will enable optical/NIR cluster cosmology at redshifts much higher than what has been possible before.

scholarly journals Principal component analysis tomography in near-infrared integral field spectroscopy of young stellar objects – I. Revisiting the high-mass protostar W33A

2021 ◽  
Vol 503 (1) ◽  
pp. 270-291
Author(s):  
F Navarete ◽  
A Damineli ◽  
J E Steiner ◽  
R D Blum
Keyword(s):  
Large Scale ◽  
Near Infrared ◽  
Rotation Axis ◽  
Principal Component ◽  
Young Stellar Objects ◽  
High Mass ◽  
Continuum Emission ◽  
Rotating Disc ◽  
Stellar Objects ◽  
K Band

ABSTRACT W33A is a well-known example of a high-mass young stellar object showing evidence of a circumstellar disc. We revisited the K-band NIFS/Gemini North observations of the W33A protostar using principal components analysis tomography and additional post-processing routines. Our results indicate the presence of a compact rotating disc based on the kinematics of the CO absorption features. The position–velocity diagram shows that the disc exhibits a rotation curve with velocities that rapidly decrease for radii larger than 0.1 arcsec (∼250 au) from the central source, suggesting a structure about four times more compact than previously reported. We derived a dynamical mass of 10.0$^{+4.1}_{-2.2}$ $\rm {M}_\odot$ for the ‘disc + protostar’ system, about ∼33 per cent smaller than previously reported, but still compatible with high-mass protostar status. A relatively compact H2 wind was identified at the base of the large-scale outflow of W33A, with a mean visual extinction of ∼63 mag. By taking advantage of supplementary near-infrared maps, we identified at least two other point-like objects driving extended structures in the vicinity of W33A, suggesting that multiple active protostars are located within the cloud. The closest object (Source B) was also identified in the NIFS field of view as a faint point-like object at a projected distance of ∼7000 au from W33A, powering extended K-band continuum emission detected in the same field. Another source (Source C) is driving a bipolar $\rm {H}_2$ jet aligned perpendicular to the rotation axis of W33A.

Gram-scale synthesis of a neodymium chelate as a spectral CT and second near-infrared window imaging agent for visualizing the gastrointestinal tract in vivo

2021 ◽  
Author(s):  
Pengrui Zhuang ◽  
Ke Xiang ◽  
Xiangxi Meng ◽  
Guohe Wang ◽  
Ziyuan Li ◽  
...  
Keyword(s):  
Gastrointestinal Tract ◽  
Fluorescence Imaging ◽  
Large Scale ◽  
Near Infrared ◽  
Imaging Agent ◽  
Spectral Ct ◽  
Green Method ◽  
Infrared Window

A facile and green method was developed to fabricate Nd-DTPA on a large scale without byproducts for CT/spectral CT and NIR II fluorescence imaging of the gastrointestinal tract in vivo.

scholarly journals C4 Bacterial Volatiles Improve Plant Health

Pathogens ◽  
2021 ◽  
Vol 10 (6) ◽  
pp. 682
Author(s):  
Bruno Henrique Silva Dias ◽  
Sung-Hee Jung ◽  
Juliana Velasco de Castro Oliveira ◽  
Choong-Min Ryu
Keyword(s):  
Plant Growth ◽  
Volatile Compounds ◽  
Large Scale ◽  
Growth Promotion ◽  
Plant Growth Promoting Rhizobacteria ◽  
Plant Health ◽  
Systemic Resistance ◽  
Potential Applications ◽  
Plant Growth Promoting ◽  
Bacterial Volatiles

Plant growth-promoting rhizobacteria (PGPR) associated with plant roots can trigger plant growth promotion and induced systemic resistance. Several bacterial determinants including cell-wall components and secreted compounds have been identified to date. Here, we review a group of low-molecular-weight volatile compounds released by PGPR, which improve plant health, mostly by protecting plants against pathogen attack under greenhouse and field conditions. We particularly focus on C4 bacterial volatile compounds (BVCs), such as 2,3-butanediol and acetoin, which have been shown to activate the plant immune response and to promote plant growth at the molecular level as well as in large-scale field applications. We also disc/ uss the potential applications, metabolic engineering, and large-scale fermentation of C4 BVCs. The C4 bacterial volatiles act as airborne signals and therefore represent a new type of biocontrol agent. Further advances in the encapsulation procedure, together with the development of standards and guidelines, will promote the application of C4 volatiles in the field.

scholarly journals One-Pot Hydrothermal Synthesis of Victoria Green (Ca3Cr2Si3O12) Nanoparticles in Alkaline Fluids and Its Colour Hue Characterisation

Nanomaterials ◽  
2021 ◽  
Vol 11 (2) ◽  
pp. 521
Author(s):  
Juan Carlos Rendón-Angeles ◽  
Zully Matamoros-Veloza ◽  
Jose Luis Rodríguez-Galicia ◽  
Gimyeong Seong ◽  
Kazumichi Yanagisawa ◽  
...  
Keyword(s):  
Near Infrared ◽  
Single Step ◽  
Spectral Space ◽  
Infrared Reflectance ◽  
Hydrothermal Preparation ◽  
Near Infrared Reflectance ◽  
One Pot ◽  
Factors Affecting ◽  
B Values ◽  
Alkaline Conditions

One-pot hydrothermal preparation of Ca3Cr2Si3O12 uvarovite nanoparticles under alkaline conditions was investigated for the first time. The experimental parameters selected for the study considered the concentration of the KOH solvent solution (0.01 to 5.0 M), the agitation of the autoclave (50 rpm), and the nominal content of Si4+ (2.2–3.0 mole). Fine uvarovite particles were synthesised at 200 °C after a 3 h interval in a highly concentrated 5.0 M KOH solution. The crystallisation of single-phase Ca3Cr2Si3O12 particles proceeded free of by-products via a one-pot process involving a single-step reaction. KOH solutions below 2.5 M and water hindered the crystallisation of the Ca3Cr2Si3O12 particles. The hydrothermal treatments carried out with stirring (50 rpm) and non-stirring triggered the crystallisation of irregular anhedral particles with average sizes of 8.05 and 12.25 nm, respectively. These particles spontaneously assembled into popcorn-shaped agglomerates with sizes varying from 66 to 156 nm. All the powders prepared by the present method exhibited CIE-L*a*b* values that correspond to the Victoria green colour spectral space and have a high near infrared reflectance property. The particle size and structural crystallinity are factors affecting the Victoria pigment optical properties, such as CIE-L*a*b* values, green tonality, and near-infrared reflectance.

scholarly journals Review of Cryogenic Carbon Capture Innovations and Their Potential Applications

2021 ◽  
Vol 7 (3) ◽  
pp. 58
Author(s):  
Carolina Font-Palma ◽  
David Cann ◽  
Chinonyelum Udemu
Keyword(s):  
Carbon Dioxide Emissions ◽  
Carbon Capture ◽  
Large Scale ◽  
Carbon Capture And Storage ◽  
Technological Readiness ◽  
Cryogenic Carbon Capture ◽  
Potential Applications ◽  
Air Capture ◽  
Reduce Carbon Dioxide ◽  
Co2 Recovery

Our ever-increasing interest in economic growth is leading the way to the decline of natural resources, the detriment of air quality, and is fostering climate change. One potential solution to reduce carbon dioxide emissions from industrial emitters is the exploitation of carbon capture and storage (CCS). Among the various CO2 separation technologies, cryogenic carbon capture (CCC) could emerge by offering high CO2 recovery rates and purity levels. This review covers the different CCC methods that are being developed, their benefits, and the current challenges deterring their commercialisation. It also offers an appraisal for selected feasible small- and large-scale CCC applications, including blue hydrogen production and direct air capture. This work considers their technological readiness for CCC deployment and acknowledges competing technologies and ends by providing some insights into future directions related to the R&D for CCC systems.

Sign in / Sign up

Export Citation Format

Share Document